Package: gnome-gpg
Version: 0.3.0-3
Severity: important
Hi,
Today I decided to try gnome-gpg. I started it up and it asks me to
enter the password for GPG.
No mater if I choose Anonymous mode or authenticated mode, gnome-gpg
shows a message "GPG terminated abnormally" and terminates.
If I start
On Mon, 3 Oct 2005, Christian Perrier wrote:
This bug report template is mostly generic so I can't point out
exactly which part of your debconf templates I have considered not
following these recommendations. I recommend your first read the
mentioned part of the DR, make the changes you feell ne
Package: finger-ldap
Version: 1.2-1
Severity: normal
hi,
finger-ldap -m simon
/usr/bin/finger-ldap: Bad hostname 'ldaps://iskwahtemis.kisikew.org/'
(2005.10.05)(pts/21)(06:22) (/)
([EMAIL PROTECTED])[22] % finger-ldap -m simon
/usr/bin/finger-ldap: Bad hostname 'ldapi://%2fvar%2frun%2fldapi'
(200
Package: kismet
Version: 2005.08.R1-1
Severity: grave
Justification: renders package unusable
Hello,
kismet is uninstallable in sid because libmagick6 isn't available anymore.
libmagick9 is in unstable so changing build-deb to libmagick9-dev and rebuilding
should fix this bug.
-- System Informa
Please find attached a new proofread version of this translation.
--
fr.po
Description: application/gettext
On Tue, Oct 04, 2005 at 01:54:16PM -0700, Dale Harris <[EMAIL PROTECTED]> wrote:
> Just meant to say you had the -S switch which would take from PRIMARY
> and put it a storage buffer. But you didn't have a switch to take a
> storage buffer and put it into PRIMARY, AFAICT.
Ah! Well.. the -S swit
I think what caused that issue was that I had removed the executable for some reason. Anyway, hope that helps.
Sean
Package: uw-imapd
Version: 7:2002edebian1-11
Severity: critical
Tags: security patch
Hi!
There is an exploitable buffer overflow in the UW-IMAP server. Details
and the patch is at
http://www.idefense.com/application/poi/display?id=313&type=vulnerabilities
This got assigned CAN-2005-2933, plea
Package: installation-reports
Debian-installer-version:
uname -a:
Date:
Method:
Machine:
Processor:950 mHz Celeron
Memory: 256MB PC133
Root Device:
Root Size/partition table: <80GB HD un partitioned.>
Output of lspci and lspci -n:
Base System Installation Checklist:
[O] = OK, [E] = Error (
Hi,
I am also interested to push wxmaxima into Debian archive.
I have prepared an updated package (last version, built against
libwxgtk2.6), here:
deb http://people.debian.org/~zufus/ wxmaxima/
deb-src http://people.debian.org/~zufus/ wxmaxima/
I
Package: www.debian.org
Severity: minor
Hi!
There is a small typo at http://ftp-master.debian.org/reject.html
At the end of the page there is a "sepcifed"
s/sepcifed/specified :-)
Thank you!
Nelson
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Conta
Package: phpwiki
Severity: wishlist
Tags: l10n
Hi,
Please find attached the French debconf templates translation update,
proofread by the debian-l10n-french mailing list contributors.
Regards
Jean-Luc
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy:
Package: ion3
Version: 20050502-2
Severity: minor
For some reason, the helvetica-medium font choosen in the look lua is
not found on my system which is a minimal X installation with only
xfonts-base.
It is not fatal but just a bit annoying on start up.
-- System Information:
Debian Release: 3.1
Package: dhcp-client
Version: 2.0pl5-19.1
Severity: minor
Tags: patch
Found a few typos in '/usr/share/man/man8/dhclient.8.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimen
Package: dhcp-client
Version: 2.0pl5-19.1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man8/dhclient-script.8.gz', see attached
'.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experi
Package: dhcp-client
Version: 2.0pl5-19.1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man5/dhcp-options-dhclient.5.gz', see attached
'.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, '
Package: dhcp-client
Version: 2.0pl5-19.1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man5/dhclient.leases.5.gz', see attached
'.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experi
Package: dhcp-client
Version: 2.0pl5-19.1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man5/dhclient.conf.5.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimen
Package: graphviz
Version: 2.2.1-1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man1/prune.1.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architect
Package: graphviz
Version: 2.2.1-1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man1/sccmap.1.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architec
Package: graphviz
Version: 2.2.1-1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man1/lefty.1.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architect
Package: graphviz
Version: 2.2.1-1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man1/gxl2dot.1.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Archite
Package: graphviz
Version: 2.2.1-1
Severity: minor
Tags: patch
Found a typo in '/usr/share/man/man1/dot.1.gz', see attached '.diff'.
Hope this helps...
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architectur
Package: horde3
Version: 3.0.5-1
Severity: wishlist
In horde2 there was a symlink /usr/share/horde2/template that pointed to
/etc/horde2/templates. This allowed you to customize the interface in a
location that wouldn't be overwritten byt the packaging system. Horde3
should do this as well. Ri
On Tue, Oct 04, 2005 at 08:19:08PM -0700, Max Alekseyev wrote:
> Steve Langasek wrote:
> >Aha, ok. So after adding two users, trying to log in via su with an empty
> >password *succeeds* with libpam-modules 0.79-3 here.
> >
> >Trying to log in to vsftp using your exact config fails; but this prob
Package: apt-move
Version: 4.2.24-1
Severity: grave
Justification: renders package unusable
As of today, apt-move fails to build the packages file. It worked
yesterday. There are two packages starting with "xfce4-syst" but none
named that, so it appears something is trunkating a package name.
m
On Wed, Oct 15, 2003 at 01:56:42PM -0400, Brian Masney wrote:
> Package: dhcp3-server
> Version: 3.0+3.0.1rc11-4
> Severity: wishlist
> Tags: patch
>
> I have a patch for DHCP 3.0.1rc12 available that will add LDAP support
> to the server. The patch is available for download at
> http://home.ntelo
Kai Hendry wrote:
>
> I apt-get install php4-curl and expected it to work straight away.
It would work straight away if you dlopen() the module. However, if you
expect PHP to do it for you on startup from php.ini, you kinda have
to... Restart it. Not required for CGI/CLI (as they "startup" on e
On Tue, Sep 27, 2005 at 12:31:36PM +0200, Hermann Lauer wrote:
> Hello Andrew,
Hi,
Sorry for the late reply. I've been digesting what you've written, and
mulling over it.
> On Fri, Sep 16, 2005 at 07:57:48PM +1000, Andrew Pollock wrote:
> > I've got to say I'm not quite following what you're sa
Package: login
Version: 1:4.0.3-35
Severity: normal
Directly after a fresh reboot eeboot, "rsh rebooted-host" results in an
immediate connection close, and the syslog on the remote host says:
Oct 5 06:12:36 cerebro in.rlogind: Connection from [EMAIL PROTECTED] for
root
Oct 5 06:12:36 ce
Synopsis: mutt stores PGP passphrase insecurely
State-Changed-From-To: open->closed
State-Changed-By: brendan
State-Changed-When: Wed, 05 Oct 2005 05:55:17 +0200
State-Changed-Why:
Mutt can use gpg-agent, which pushes this problem outside of mutt's domain.
Comment added by brendan on Wed,
Steve Langasek wrote:
Aha, ok. So after adding two users, trying to log in via su with an empty
password *succeeds* with libpam-modules 0.79-3 here.
Trying to log in to vsftp using your exact config fails; but this problem is
specific to the authorization component of the module, not the
authe
> I'm probably not aware of all the implications of different
> misconfigurations, but I thought 329163 was about the problems that
> happen if, for example, fail2ban-ssh is missing. In contrast, in the
> case I'm thinking of, fail2ban-ssh (the table) is present, but there
> are no references to i
Package: evince
Version: 0.4.0-1
Severity: minor
Well, maybe this is just nitpicking but in your long description you
mention that the pdf renderer is based on xpdf while it actually is
based on poppler (I know that poppler is a fork of xpdf). I just thought
give credit where credit is due.
Chee
Package: sasl2-bin
Version: 2.1.19-1.5
Severity: wishlist
The init.d script just quits without any information when the system is
not setup in /etc/defaults/saslauthd. It should give an error
indicating that. This is probably a bug with a lot of init scripts.
Bill
-- System Information:
Debia
Package: xfmedia
Version: 0.9.0-1
Severity: minor
In the preferences -> Devices, Alt-C is mapped to both "CD Audio Device"
and "Close" and Alt-D is mapped to "Devices", "DVD Video Device" and
"Driver". It might be better to have unique keys.
-- System Information:
Debian Release: testing/unstable
On Tue, Oct 04, 2005 at 03:18:27PM -0400, Yaroslav Halchenko wrote:
> On Tue, Oct 04, 2005 at 11:29:45AM -0700, Ross Boylan wrote:
> > concerns the program operation and endless loop. This one concerns
> > primarily user information (which may have been addressed) and the
> > problem that the fire
Package: openoffice.org
Version: 1.1.4-7
Severity: important
I'm unable to insert and reproduce sound in any OpenOffice.org document.
The menu item 'Insert / Object / Sound' is grayed in all OO applications.
In OO Impress I can't either insert or reproduce sound effects and background
sound.
--
Hamish Moffatt <[EMAIL PROTECTED]> writes:
>>$ xpdf global-illumination-egwr96.pdf
>>xpdf: error while loading shared libraries: libXft.so.1: cannot open
>> shared object file: No such file or directory
>>
>> Is there a missing dependency somewhere...?
>
> That's weird. On my native amd6
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Package: util-vserver
Version: 0.30.204-5sarge2
Severity: important
Tags: patch
As it turns out the 208 util-vserver tools don't properly fall back
to VCMD_ctx_create_v0 if the main one doesn't work, this occurs if
you use these tools with the 1.9.5
Package: ifile
Version: 1.3.4-2
Severity: minor
Sample scripts use #!/bin/ksh, but #!/bin/bash works just as well, and
/bin/bash is generally found on a Debian system.
I fixed my copies with a perl oneliner:
perl -i -pe 's{/bin/ksh}{/bin/bash}g' ifile.*
BTW: looks like the mailing lists at no
Package: lockfile-progs
Version: 0.1.10
Followup-For: Bug #244314
Here is a patch to remove the man page note about --retry 0 not trying to lock
at all. This was fixed in liblockfile 1.04 (see bug #161685) so the patch also
forces a depends liblockfile >= 1.04. It will close both #244314 and #16
Package: dhis-client
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=sv_SE, LC_CTY
Package: xcdroast
Version: 0.98+0alpha15-2
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Loca
Package: lvm2
Version: 2.01.14-3
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=s
Package: lvm10
Version: 1:1.0.8-11
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG
Package: devfsd
Version: 1.3.25-23
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG
On Tue, 9 Mar 2004 Graham Wilson <[EMAIL PROTECTED]> wrote
> I have learned the hard way now why fetchmail uses a non-standard
> pidfile format. It writes out only the PID if the process is running
> in the foreground, but writes out two if the process is running in
> the background.
This is not
On 04-Oct-2005, Ian Jackson wrote:
> I agree that the policy manual shouldn't be a general repository for
> listing bugs not to have. But surely it's sensible to mention the
> one or two obvious bugs that so many people get wrong ?
Not in policy, IMO. I'd like to keep that camel's nose out of the
Package: ftp.debian.org
Remove oftpd from unstable. It has no active upstream maintainer, has a
couple of outstanding security flaws, and I have no time to attempt to
fix this myself.
--
;; Matthew Danish -- user: mrd domain: cmu.edu
;; OpenPGP public key: C24B6010 on keyring.debian.org
--
Package: eagle-usb
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=sv_SE, LC_CTYPE
Package: gdb
Version: 6.3-6
Severity: normal
After running my program for a few hours, then ending it normally
(through the program), when I tried to run it again I got this error:
BFD: BFD 2.15.93 20041018 internal error, aborting at
/nevyn/local/gdb/gdb-6.3/bfd/cache.c line 495 in bfd_cache_lo
Assuming anyone ever sees this, you might want to fix your broken
mailing list configuration.
- Forwarded message from [EMAIL PROTECTED] -
From: [EMAIL PROTECTED]
Date: Wed, 05 Oct 2005 01:51:20 +0200
To: [EMAIL PROTECTED]
Subject: Bug#331808: drupal depends on debconf without | debconf-2
[EMAIL PROTECTED] (Joey Hess)
> This package depends/pre-depends on debconf without allowing the dependency
> to be satisfied with an alternate of debconf-2.0. That is to say, its
> dependency should read: debconf | debconf-2.0
Huh? The latest upload (efax 1:0.9a-16) has that dependency.
Should yo
On 4 October 2005 at 08:23, Matt Kraai wrote:
| On Tue, Oct 04, 2005 at 06:17:27AM -0500, Dirk Eddelbuettel wrote:
| >
| > On 3 October 2005 at 21:59, Matt Kraai wrote:
| > | > | > I disabled a few of these tests on other packages formerly provided
by
| > | > | > r-recommended, and I guess I nee
Package: ptex-jisfonts
Version: 2-15
In debconf question about reconfiguration,
it mentions dvipdfm-cjk, which is replaced by dvipdfmx
regards,
junichi
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: libgtk2.0-0
Version: 2.6.10-1
Severity: important
When running Freeciv 2.0 (currently in debian unstable, also downloadable
from http://freeciv.org/) under valgrind, I get a number of warnings and
errors inside the glib and gdk libraries. Some of these are actual errors
that look like t
Em Seg, 2005-10-03 às 18:55 -0700, Daniel Burrows escreveu:
> If it's not, then the attached fix should solve the problem
> and I can close this in the next upload.
Applying the patch fixed the problem. Thanks a lot! =)
See ya,
--
Guilherme de S. Pastore (fatalerror)
<[EMAIL PROTECTED]>
reassign 331796 cdebconf,debhelper
thanks
debhelper depends on debconf because dh_installdebconf uses
debconf-mergetemplate in some edge cases (non-po template translations).
Either cdebconf needs to include an implementation of
debconf-mergetemplate, or debhelper needs to find a way to drop this
package reportbug
tags 331718 +woody +wontfix
thanks
On 10/4/05, Ewen McNeill <[EMAIL PROTECTED]> wrote:
> Package: reportbug
> Version: 1.50
> Severity: important
>
> Recently (last known to work a few weeks ago), reportbug in Debian Woody
> crashes with a Python error and traceback immediately a
On Tue, Oct 04, 2005 at 06:17:27AM -0500, Dirk Eddelbuettel wrote:
>
> On 3 October 2005 at 21:59, Matt Kraai wrote:
> | > | > I disabled a few of these tests on other packages formerly provided by
> | > | > r-recommended, and I guess I need to disable it here too.
> | > |
> | > | This was on i38
Package: ion3
Version: 20050820-4
Severity: normal
With a fresh install and user account, ion3 complains on start that the
MAIL environment variable is not set.
I assume one workaround is to set the MAIL environment variable.
Another workaround is to comment out the line that reads
dopath("mo
Hi! =)
Sorry for taking so long to reply, I had to stay at school the whole
day, and could only read/act upon your message now =/
Em Seg, 2005-10-03 às 18:55 -0700, Daniel Burrows escreveu:
> Is mutt currently installed on your computer?
No, it's not.
> If it is and you are up
> to the task,
Package: bakery2.3
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=sv_SE, LC_CTYPE
Package: aptitude
Version: 0.3.4-1
Severity: minor
Tags: experimental
I notice an interesting problem with the search box in the
experimental version:
If I type a search term and go to the "Ok" button and hit "enter", the
search term seems not to be saved. If I hit "n" nothing happens or
the last
NMUs are welcome on these bugs (and other such transitional bugs in any of
my packages).
--
- mdz
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
tags 331706 + wontfix
thanks
Hi,
At Tue, 04 Oct 2005 22:20:59 +0200,
Thomas Breitner wrote:
> Package: cupsys
> Version: 1.1.23-12
> Severity: wishlist
>
> i'd like to see cupsys not starting as normal standalone daemon, but from
> inetd.
> Solution:
> Samba asks me (dpkg-reconfigure) wheter
adrian wrote:
On Mon, Oct 3, 2005 at 23:46:00 +0200 (+0200), Nicolas Leonard wrote:
I'm using dante-server with a PAM based authentication method, linked to
winbind to be able to authenticate the users against my NT domain.
I recently tried to upgrade to dante-server 1.1.18, and it breaks
Hi,
are you still interested in packageing 2pong? If not, I will do it.
Regards,
Daniel
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Email: [EMAIL PROTECTED]
Internet: http://people.panthera-systems.net/~daniel-baumann/
--
To UNSUBSCRIBE, email to [E
Matthias Klose wrote:
Package: docbook-xsl
Version: 1.68.1
Severity: serious
The extensions contains many jar files, without having the sources in
the source package, the problematic files seem to be:
saxon644.jar
saxon65.jar
saxon651.jar
saxon652.jar
saxon653.jar
I don't change wha
Package: php4-curl
Version: 4:4.3.10-16
Severity: minor
I apt-get install php4-curl and expected it to work straight away.
Instead my applications reported:
Call to undefined function: curl_init()
Errors. After a :
sudo /etc/init.d/apache2 restart
It did start to work.
-- System Information
Package: galeon-common
Version: 1.3.21-6
Severity: normal
In the course of removing Gnome, I first removed gconf2. Then I used
"orphaner" from the deborphan package to clean up other now-orphaned
files. When I got around to removing galeon-common, I got:
Removing galeon-common ...
/var/lib/dpkg
Matthias Klose wrote:
Package: docbook-xsl
Version: 1.68.1-0.1
$ ls -l /usr/share/java/docbook-xsl-*
-rw-r--r-- 1 root root 40642 May 3 08:43
/usr/share/java/docbook-xsl-saxon65-1.68.1.jar
lrwxrwxrwx 1 root root30 Oct 4 12:54 /usr/share/java/docbook-xsl-saxon65.jar
-> docbook-xsl-saxon
Package: valgrind
Version: 1:3.0.1-1
Severity: important
I have the following entry in my ~/valgrind.supp file
{
L_2
Memcheck:Cond
obj:/lib/ld-2.3.5.so
obj:/lib/ld-2.3.5.so
obj:/lib/ld-2.3.5.so
obj:/lib/ld-2.3.5.so
obj:/lib/ld-2.3.5.so
obj:/lib/ld-2.3.5.so
}
it was gener
On Tue, Oct 04, 2005 at 03:33:36PM -0700, Wilmer Lau wrote:
> However, you don't sound very 'welcoming' to a newbie like me to
> participate in the Debian process in the future. I've heard problems
> with Debian's community being somewhat exclusive, not friendly, and
> welcoming. If you were me,
Fair enough. Case closed. Looking forward to the update.
2005/10/4, Ming Hua <[EMAIL PROTECTED]>:
> On Tue, Oct 04, 2005 at 03:33:36PM -0700, Wilmer Lau wrote:
> > However, you don't sound very 'welcoming' to a newbie like me to
> > participate in the Debian process in the future. I've heard pr
Hello Andree and everyone,
> A difference to the old behaviour is in both cases that only
>libraries in tls are returned (if this is what ldd reports) and not the
>non-tls counterparts. I believe that this is acceptable, though
I tried this patch on an "old" sarge and with a recent install, and t
Hi!
* grayman <[EMAIL PROTECTED]> [051004 23:24]:
> > I have to disagree. dpkg can print very complex messages, which most
> > users certainly will not understand, even if they can read =P
> And what is your point here exactly? Debinstaller is not good enough,
> because it dont spit user friendly
Hello,
Thank you very much for your message, Andree - you really deserved your
vacation ;-)
I had seen the bug on mindi, but I had not paid enough attention to it. So, I
looked at it again and tried the patch, on both a Sarge system (on which it
worked before) and a recent one (on which it did
See attached
#
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x2ae50656, pid=5919, tid=46912501814992
#
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_05-b05 mixed mode)
# Problematic frame:
# C [libc.so.6+0x74656]
#
--- T
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
These bug reports are very confusing, I am performing my own tests to
help clarify.
Andrew Lee wrote:
> The VCI shouldn't be if you have setup /dev/loop4 correctly, I
> did same thing and got same errors when I forgot to setup the /dev/
> loop4 aft
Hi,
I just took a look to the ipod_boot_sector you sent and the only
thing I'm sure about is that Apple completely messed up the format...
This is a mix of an MBR and a DBR describing a FAT32... I've never
seen something so crazy before. That's quite like mixing a
container and its content. Parte
If I had known the proper 'process', I would have done so. Thanks for
informing me now. I won't do so in the future.
However, you don't sound very 'welcoming' to a newbie like me to
participate in the Debian process in the future. I've heard problems
with Debian's community being somewhat exclu
Package: zope2.7
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=sv_SE, LC_CTYPE=s
Package: zope
Version: 2.6.4-3
Severity: wishlist
Tags: patch l10n
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.13.2
Locale: LANG=sv_
Package: phpwiki
Version: 1.3.10-1
Severity: important
Session handling gets broken on upgrade by default. The following SQL
is required to correct:
ALTER TABLE session ADD COLUMN sess_ip char(15);
ALTER TABLE session ALTER COLUMN sess_ip SET NOT NULL;
You may want to try to to add a call to ch
Package: azureus
Version: 2.3.0.4-3
Severity: normal
Launching azureus with blackdown java results in a segmentation fault on
amd64, sid.
java -verbose -Djava.library.path=/usr/lib -classpath
/usr/share/java/swt-gtk-3.1.jar:/usr/share/java/Azureus2.jar
org.gudy.azureus2.ui.swt.Main output is:
[L
Some more info on the issue:
If trying to execute the failing command by hand one gets the following
error message:
/tmp/chroottest$ sudo chroot /tmp/chroottest/woody dpkg --force-depends
--install var/cache/apt/archives/base-files_3.0.2_i386.deb
var/cache/apt/archives/base-passwd_3.4.1_i386.deb
Package: www.debian.org
Severity: minor
lists.alioth.debian.org says
"If you are having trouble using the lists, please contact
[EMAIL PROTECTED]"
As I discovered when I posted there, it's a moderated list.
I suggest either
1) turn off moderation
2) direct people to an unmoderated list
or, le
Package: adduser
Version: 3.63
Severity: normal
File: /usr/sbin/deluser
When making a backup with deluser, the resulting file is created like
any other file made by root, and with my umask of 022 it is world
readable.
This is bad since then everybody who get hold of it has access to the
old users
severity 271739 minor
merge 266320 271739
tags 266320 + confirmed
thanks
Hello,
this problem is still present:
ii samba-common3.0.14a-6 Samba common files used by both the server
and
$ LC_ALL=C man smb.conf >/dev/null
Reformatting smb.conf(5), please wait...
/tmp/zmanq19L2W:79: warn
Package: koules
Version: 1.4-11
Severity: important
Xkoules segfaults on 64 bits architectures where a long int is bigger
than 32 bits. The problem is line 157 of xlib/interface.c:
unsigned long *out = (unsigned long *) source.ximage->data;
This should be replaced by:
ui
Buy Cheap PC Software from Special Reserve.
http://xmeug.uc0hirh2ibzkuuu7zuc7zuuu.paxwaxmd.com/?bofxa
When the gods wish to punish us, they answer our prayers.
Better to reign in Hell, than serve in Heav'n.
Blaze with the fire that is never extinguished.
But the body is deeper than th
Package: k3b-i18n
Version: 0.12.4a-1
Severity: wishlist
Hello,
I found some messages on the french k3b gui that were not translated. I
downloaded the k3b.po file from the k3b-i18n package and made some
corrections.
You'll find a diff file attached to that mail... Hope it helps !
Regards,
G
Package: reportbug
Version: 1.50
Severity: important
Recently (last known to work a few weeks ago), reportbug in Debian Woody
crashes with a Python error and traceback immediately after querying the
Debian BTS. This means that bugs cannot be reported using the Woody
"reportbug", except by forcing
Florian Ernst <[EMAIL PROTECTED]> wrote:
> as I've just picked up maintainership of texi2html in Debian I'd now
> like to tackle this quite dated issue...
Thanks! I appreciate that (even though I use makeinfo now ;-).
> On Tue, 12 Aug 2003 08:27:44 -1000, Bill Wohler wrote:
> > The input:
> > [.
Phil,
I believe your observations are correct. That is, two manifestations
of the same bug.
I've had this problem for a number of months, as I said, on a FreeBSD
server. However we have an almost identical server (also running
FreeBSD) and the ircd has an uptime of almost six months.
Ga
PS. I can never actually re-create the issue; it happens at random.
I've found that if I wait for it to happen, it doesn't!!
On 4 Oct 2005, at 17:37, Philip Craig wrote:
Marc Haber wrote:
One time it again broke at m_away.c line 88. Another time it
broke at m_away.c line 68
That, how
> I have to disagree. dpkg can print very complex messages, which most> users certainly will not understand, even if they can read =PAnd what is your point here exactly? Debinstaller is not good enough, because it dont spit user friendly messages?
Oh wait, so is dpkg! Since debinstaller is just a s
Package: exim4
Version: 4.52-2
Severity: wishlist
[2nd attempt to submit this bug]
Thanks to recent local chaos, the system attempted to deliver some
undeliverable messages to the original sender, logcheck.
/etc/aliases on my system needed
logcheck: root
as an entry. When I checked, I discove
1 - 100 of 434 matches
Mail list logo
