...getting closer but no luck for me with that: *...* *Found file(lib): /usr/share/linuxcnc/hallib/axis_manualtoolchange.hal* *4:rtapi_app:965:user pid=965 flavor=rt-preempt gcc=6.3.0 20170516 git=unknown* *Traceback (most recent call last):* * File "/usr/bin/hal_manualtoolchange", line 11, in <module>* * import linuxcnc, hal* *ImportError: /home/zus/EMCApplication/lib/python/linuxcnc.so: undefined symbol: PyUnicode_FromString* */usr/share/linuxcnc/hallib/axis_manualtoolchange.hal:1: hal_manualtoolchange exited without becoming ready* *Shutting down and cleaning up LinuxCNC...* *...*
i'm trying to start axis, but also with other configurations i had no luck. which configuration are you running? On Saturday, 24 October 2020 at 20:47:29 UTC+2 Michael Brown wrote: > Just got a working Python3 Emcapplication running on the FZ3 arm64 > mksocfpga: based on this thread: > <https://github.com/machinekit/EMCApplication/issues/2#issuecomment-706786657> > > git clone git clone https://github.com/machinekit/emcapplication.git > cd emcapplication > sudo apt install build-essential fakeroot devscripts equivs python > lsb-release apt-cudf > sudo apt-get install python3-tk > debian/configure machinekit-hal=0.4.21003-1.git39389db84~$(lsb_release > -cs) no-docs > mk-build-deps -irs sudo -t 'apt-cudf-get --solver aspcud -o > Debug::pkgProblemResolver=0 -o APT::Install-Recommends=0' > cd src > ./autogen.sh > ./configure --with-hal=machinekit-hal --with-python=python3 > --with-boost-python=boost_python-py35 > make -j$(nproc) > sudo make install > source ../scripts/rip-environment > linuxcnc > > On Saturday, October 3, 2020 at 7:49:44 PM UTC+2 Claudio Lorini wrote: > >> Hello, >> i'm trying running EMCApplication on a MYIR Ultrascale board, with >> kernel: >> Linux zus-cl 5.4.0-rt1+ #7 SMP PREEMPT_RT Wed Sep 30 13:21:36 CEST 2020 >> aarch64 GNU/Linux >> with Debian strech >> >> I think i managed to install nachinekit-hal, all tests are passing and i >> can get some very >> nice result on latency tests: >> [image: 5.4RT.png] >> i built EMCA from sources and configured to use hachinekit-hal (i think) >> ./configure --with-hal=machinekit-hal >> >> but launching any configuration for linuxcnc i get some sort of this >> error: >> .... >> 4:rtapi_app:5413:user pid=5413 flavor=rt-preempt gcc=6.3.0 20170516 >> git=unknown >> Traceback (most recent call last): >> File "/home/zus/EMCApplication/bin/hal_manualtoolchange", line 11, in >> <module> >> import linuxcnc, hal >> File "/home/zus/EMCApplication/lib/python/hal.py", line 30, in <module> >> import _hal >> *ImportError: No module named _hal* >> >> I think i miss some very basic step, i tried to look for some basic >> how-to but could not find anything useful... >> can someone point me in the right direction? >> >> >> >> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/da1509d4-f525-42b6-9900-7cda2d4737d1n%40googlegroups.com.
