> -----Original Message-----
> From: Robert Nelson [mailto:[email protected]]
> > I moved the MicroSD card over to the other Beagle. Booted and USB mouse
> > and keyboard (Logitech wireless) work. The Logitech
> wireless was not discovered on the other Beagle.
> >
> > I think it may be sick.
> >
> > From the descriptions on https://beagleboard.org/latest-images I can't
> > figure out what the latest graphical desktop image is for the
> BBB.
>
> There really isn't an official lxqt release, it just was too un-useful:
>
> https://rcn-ee.net/rootfs/bb.org/testing/2021-04-27/
>
> Regards,
>
> --
> Robert Nelson
Been an interesting weekend with many different versions flashed (or sometimes
not) into the eMMC.
I have this currently running well from the 32MB SD card from the img link
above.
debian@beaglebone:~$ uname -a
Linux beaglebone 4.19.94-ti-r63 #1buster SMP PREEMPT Fri May 14 16:42:32 UTC
2021 armv7l GNU/Linux
There is on issue I've run into that has caused a lot of grief and retries.
That's the behavior of the USB port on and after boot.
I have two monitors and an IOGEAR GUS402 USB 2.0 peripheral sharing device.
Press a button and it switches the keyboard and mouse between my main
workstation and whatever module I'm currently working on; BBB, Pi3, Pi4,
PiZeroW.
Between that and the BBB I've been using a 4 port USB hub. One from ANKER
which is a USB 3.0 hub and one from INSIGNIA a 4 port USB 2.0 hub with separate
power adaptor. The BBB doesn't like the 3.0 hub very much.
Using the 4 port USB 2.0 hub if the IOGEAR isn't switched to present the
keyboard and mouse to the Beagle during boot after that, although the screen
shows the desktop, the mouse pointer remains in the middle of the screen and
mouse and keyboard don't work.
If I've booted with the switch set so the keyboard and mouse are visible to the
BBB then after that I can switch back and forth between the workstation and the
beagle.
I've attached the serial port boot log and also the dmesg log that shows usb
isn't ready. What's missing so that it will find a usb device when it's
plugged in?
Thanks
John
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/0e6201d74abe%2486225e80%2492671b80%24%40autoartisans.com.
U-Boot SPL 2019.04-00002-gbb4af0f50f (Jul 08 2019 - 11:44:39 -0500)
Trying to boot from MMC2
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
U-Boot 2019.04-00002-gbb4af0f50f (Jul 08 2019 - 11:44:39 -0500), Build:
jenkins-github_Bootloader-Builder-128
CPU : AM335X-GP rev 2.1
I2C: ready
DRAM: 512 MiB
No match for driver 'omap_hsmmc'
No match for driver 'omap_hsmmc'
Some drivers were not found
Reset Source: Power-on reset has occurred.
RTC 32KCLK Source: External.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Loading Environment from EXT4... ** File not found /boot/uboot.env **
** Unable to read "/boot/uboot.env" from mmc0:1 **
Board: BeagleBone Black
<ethaddr> not set. Validating first E-fuse MAC
BeagleBone Black:
BeagleBone: cape eeprom: i2c_probe: 0x54:
BeagleBone: cape eeprom: i2c_probe: 0x55:
BeagleBone: cape eeprom: i2c_probe: 0x56:
BeagleBone: cape eeprom: i2c_probe: 0x57:
Net: eth0: MII MODE
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
board_name=[A335BNLT] ...
board_rev=[00C0] ...
switch to partitions #0, OK
mmc0 is current device
SD/MMC found on device 0
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
starting USB...
USB0: scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
gpio: pin 54 (gpio 54) value is 1
Checking for: /boot/uEnv.txt ...
switch to partitions #0, OK
mmc0 is current device
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
2058 bytes read in 45 ms (43.9 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.19.94-ti-r63 ...
10166784 bytes read in 698 ms (13.9 MiB/s)
debug: [enable_uboot_overlays=1] ...
debug: [enable_uboot_cape_universal=1] ...
debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
loading /boot/dtbs/4.19.94-ti-r63/am335x-boneblack-uboot-univ.dtb ...
164234 bytes read in 87 ms (1.8 MiB/s)
uboot_overlays: [fdt_buffer=0x60000] ...
uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ...
1584 bytes read in 677 ms (2 KiB/s)
uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ...
4915 bytes read in 256 ms (18.6 KiB/s)
uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ...
650 bytes read in 252 ms (2 KiB/s)
uboot_overlays: unable to find [mmc 0:1 AM335X-PRU-RPROC-4-19-TI-00A0.dtbo]...
loading /boot/initrd.img-4.19.94-ti-r63 ...
12305107 bytes read in 828 ms (14.2 MiB/s)
debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0
lpj=1990656 rng_core.default_quality=100 quiet] ...
debug: [bootz 0x82000000 0x88080000:bbc2d3 88000000] ...
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8f443000, end 8ffff2d3 ... OK
Loading Device Tree to 8f3b7000, end 8f442fff ... OK
Starting kernel ...
[ 0.002223] timer_probe: no matching timers found
[ 0.189130] l4_wkup_cm:clk:0010:0: failed to disable
[ 1.752230] omap_voltage_late_init: Voltage driver support not added
rootfs: clean, 286836/1888768 files, 2071045/7790720 blocks
[ OK ] Started Set console font and keymap.
[ 29.917327] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_suspend (88, <AValid),
retry #0, port1 00000507
[ OK ] Activated swap /var/cache/swap/swapfile.
[ OK ] Reached target Swap.
[ OK ] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Entropy daemon using the HAVEGE algorithm.
[ OK ] Started udev Coldplug all Devices.
Starting Helper to synchronize boot up for ifupdown...
Starting Show Plymouth Boot Screen...
[ OK ] Started Helper to synchronize boot up for ifupdown.
Starting Raise network interfaces...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Forward Password Râ¦s to Plymouth Directory Watch.
[ OK ] Reached target Local Encrypted Volumes.
[ OK ] Reached target Paths.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Listening on Node-RED Socket.
[ OK ] Listening on bonescript.socket.
[ OK ] Listening on Cloud9 Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started Regular background program processing daemon.
Starting Login Service...
Starting System Logging Service...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started D-Bus System Message Bus.
Starting Connection service...
[ OK ] Started Bonescript autorun.
Starting LSB: Load kernel â¦d to enable cpufreq scaling...
Starting Disk Manager...
Starting WPA supplicant...
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timers.
[ OK ] Started System Logging Service.
[ OK ] Started Raise network interfaces.
[ OK ] Started Login Service.
[ OK ] Started WPA supplicant.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Connection service.
[ OK ] Reached target Network.
Starting Permit User Sessions...
[ OK ] Reached target Network is Online.
Starting OpenBSD Secure Shell server...
Starting A high performanc⦠and a reverse proxy server...
Starting Generic Board Startup...
Starting Samba NMB Daemon...
[ OK ] Started Permit User Sessions.
Starting Hold until boot process finishes up...
Starting Light Display Manager...
Starting Authorization Manager...
[ OK ] Started OpenBSD Secure Shell server.
[ OK ] Started LSB: Load kernel mâ¦ded to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
Starting Hostname Service...
[ OK ] Started Authorization Manager.
[ OK ] Started LSB: set CPUFreq kernel parameters.
Debian GNU/Linux 10 beaglebone ttyS0
BeagleBoard.org Debian Buster LXQt Image 2021-04-27
Support: https://bbb.io/debian
default username:password is [debian:temppwd]
beaglebone login: debian
Password:
Last login: Sun May 16 14:47:11 PDT 2021 on ttyS0
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
debian@beaglebone:~$ uname -a
Linux beaglebone 4.19.94-ti-r63 #1buster SMP PREEMPT Fri May 14 16:42:32 UTC
2021 armv7l GNU/Linux
debian@beaglebone:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.94-ti-r63 (voodoo@rpi4b4g-03) (gcc version
8.3.0 (Debian 8.3.0-6)) #1buster SMP PREEMPT Fri May 14 16:42:32 UTC 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] Normal zone: 1148 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon)
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4c0
with crng_init=0
[ 0.000000] percpu: Embedded 17 pages/cpu s38988 r8192 d22452 u69632
[ 0.000000] pcpu-alloc: s38988 r8192 d22452 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ 0.000000] Kernel command line: console=ttyO0,115200n8
bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4
rootwait coherent_pool=1M net.ifnames=0 lpj=1990656
rng_core.default_quality=100 quiet
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 432812K/522240K available (13312K kernel code, 1140K
rwdata, 4336K rodata, 1024K init, 350K bss, 40276K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0x(ptrval) - 0x(ptrval) (14304 kB)
.init : 0x(ptrval) - 0x(ptrval) (1024 kB)
.data : 0x(ptrval) - 0x(ptrval) (1141 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 351 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 42210 entries in 124 pages
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000024] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000046] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 79635851949 ns
[ 0.000058] OMAP clocksource: timer1 at 24000000 Hz
[ 0.002223] timer_probe: no matching timers found
[ 0.002577] Console: colour dummy device 80x30
[ 0.002606] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.002612] This ensures that you still see kernel messages. Please
[ 0.002616] update your kernel commandline.
[ 0.002678] Calibrating delay loop (skipped) preset value.. 995.32 BogoMIPS
(lpj=1990656)
[ 0.002696] pid_max: default: 32768 minimum: 301
[ 0.002985] Security Framework initialized
[ 0.002999] Yama: becoming mindful.
[ 0.003144] AppArmor: AppArmor initialized
[ 0.003261] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.003273] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.004376] CPU: Testing write buffer coherency: ok
[ 0.004442] CPU0: Spectre v2: using BPIALL workaround
[ 0.004944] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025312] Setting up static identity map for 0x80100000 - 0x80100060
[ 0.033216] rcu: Hierarchical SRCU implementation.
[ 0.044460] EFI services will not be available.
[ 0.049225] smp: Bringing up secondary CPUs ...
[ 0.049240] smp: Brought up 1 node, 1 CPU
[ 0.049252] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.049259] CPU: All CPU(s) started in SVC mode.
[ 0.050983] devtmpfs: initialized
[ 0.085607] VFP support v0.3: implementor 41 architecture 3 part 30 variant
c rev 3
[ 0.086244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.086271] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.090246] xor: automatically using best checksumming function neon
[ 0.090263] pinctrl core: initialized pinctrl subsystem
[ 0.091591] NET: Registered protocol family 16
[ 0.096776] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.189130] l4_wkup_cm:clk:0010:0: failed to disable
[ 0.229465] audit: initializing netlink subsys (disabled)
[ 0.233329] audit: type=2000 audit(0.220:1): state=initialized
audit_enabled=0 res=1
[ 0.238716] OMAP GPIO hardware version 0.1
[ 0.263006] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.289370] raid6: using algorithm neonx8 gen() 0 MB/s
[ 0.289383] raid6: .... xor() 0 MB/s, rmw enabled
[ 0.289390] raid6: using neon recovery algorithm
[ 0.297404] edma 49000000.edma: TI EDMA DMA engine driver
[ 0.304433] SCSI subsystem initialized
[ 0.305378] libata version 3.00 loaded.
[ 0.305698] usbcore: registered new interface driver usbfs
[ 0.305756] usbcore: registered new interface driver hub
[ 0.305871] usbcore: registered new device driver usb
[ 0.307911] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.309468] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 0.310038] pps_core: LinuxPPS API ver. 1 registered
[ 0.310049] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.310072] PTP clock support registered
[ 0.310951] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 0.313573] Advanced Linux Sound Architecture Driver Initialized.
[ 0.314367] NetLabel: Initializing
[ 0.314376] NetLabel: domain hash size = 128
[ 0.314381] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.314470] NetLabel: unlabeled traffic allowed by default
[ 0.315594] clocksource: Switched to clocksource timer1
[ 0.478292] VFS: Disk quotas dquot_6.6.0
[ 0.478416] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.479278] AppArmor: AppArmor Filesystem Enabled
[ 0.492382] NET: Registered protocol family 2
[ 0.493409] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144
bytes)
[ 0.493444] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.493487] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.493545] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.493679] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.493700] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.494072] NET: Registered protocol family 1
[ 0.507236] RPC: Registered named UNIX socket transport module.
[ 0.507246] RPC: Registered udp transport module.
[ 0.507252] RPC: Registered tcp transport module.
[ 0.507257] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.508192] Unpacking initramfs...
[ 1.019670] random: fast init done
[ 1.229103] Freeing initrd memory: 12020K
[ 1.229961] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 1.233151] Initialise system trusted keyrings
[ 1.233592] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 1.240805] zbud: loaded
[ 1.248231] NFS: Registering the id_resolver key type
[ 1.248274] Key type id_resolver registered
[ 1.248280] Key type id_legacy registered
[ 1.248299] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.248649] fuse init (API version 7.27)
[ 1.259072] Key type asymmetric registered
[ 1.259086] Asymmetric key parser 'x509' registered
[ 1.259193] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
246)
[ 1.263538] io scheduler noop registered
[ 1.263547] io scheduler deadline registered
[ 1.264097] io scheduler cfq registered (default)
[ 1.264108] io scheduler mq-deadline registered
[ 1.267382] pinctrl-single 44e10800.pinmux: 142 pins, size 568
[ 1.281269] gpio-of-helper ocp:cape-universal: ready
[ 1.292348] gpio-clk: probe of ocp:clk_mcasp0 failed with error -17
[ 1.294922] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.298594] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud =
3000000) is a 8250
[ 1.308781] console [ttyS0] enabled
[ 1.309968] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 31, base_baud =
3000000) is a 8250
[ 1.310966] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 32, base_baud =
3000000) is a 8250
[ 1.312141] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 33, base_baud =
3000000) is a 8250
[ 1.313097] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 34, base_baud =
3000000) is a 8250
[ 1.314054] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 35, base_baud =
3000000) is a 8250
[ 1.317678] omap_rng 48310000.rng: Random Number Generator ver. 20
[ 1.318673] sdhci: Secure Digital Host Controller Interface driver
[ 1.318681] sdhci: Copyright(c) Pierre Ossman
[ 1.319213] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000
microseconds (-22)
[ 1.319224] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 1.320063] omap_hsmmc 48060000.mmc: Linked as a consumer to regulator.1
[ 1.320702] random: crng init done
[ 1.345111] omap_hsmmc 481d8000.mmc: Linked as a consumer to regulator.1
[ 1.368747] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.405053] mmc0: host does not support reading read-only switch, assuming
write-enable
[ 1.408283] mmc0: new high speed SDHC card at address aaaa
[ 1.413904] mmcblk0: mmc0:aaaa SH32G 29.7 GiB
[ 1.417754] mmc1: new high speed MMC card at address 0001
[ 1.420796] mmcblk0: p1
[ 1.423220] mmcblk1: mmc1:0001 MMC04G 3.60 GiB
[ 1.424085] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 1.424725] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 1.425046] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB, chardev
(245:0)
[ 1.426552] mmcblk1: p1
[ 1.494766] eqep 48300180.eqep: ver. 1.0
[ 1.494998] eqep 48300180.eqep: count_mode:0
[ 1.495011] eqep 48300180.eqep: invert_qa:1
[ 1.495019] eqep 48300180.eqep: invert_qb:1
[ 1.495028] eqep 48300180.eqep: invert_qi:0
[ 1.495037] eqep 48300180.eqep: invert_qs:0
[ 1.495046] eqep 48300180.eqep: swap_inputs:0
[ 1.495056] eqep 48300180.eqep: QDECCTL:0x0180
[ 1.495064] eqep 48300180.eqep: QPOSINIT:0x00000000
[ 1.495072] eqep 48300180.eqep: QPOSMAX:0xffffffff
[ 1.495080] eqep 48300180.eqep: QPOSCNT:0x00000000
[ 1.495088] eqep 48300180.eqep: omit_interrupt:0
[ 1.495096] eqep 48300180.eqep: QEINT:0x0800
[ 1.495104] eqep 48300180.eqep: QUPRD:0x05f5e100
[ 1.495111] eqep 48300180.eqep: QEPCTL:0x009e write
[ 1.495118] eqep 48300180.eqep: QEPCTL:0x009e read
[ 1.495144] eqep 48300180.eqep: irq:138, clk_rate:100000000
[ 1.495342] eqep 48302180.eqep: ver. 1.0
[ 1.495458] eqep 48302180.eqep: count_mode:0
[ 1.495468] eqep 48302180.eqep: invert_qa:1
[ 1.495477] eqep 48302180.eqep: invert_qb:1
[ 1.495485] eqep 48302180.eqep: invert_qi:0
[ 1.495493] eqep 48302180.eqep: invert_qs:0
[ 1.495501] eqep 48302180.eqep: swap_inputs:0
[ 1.495508] eqep 48302180.eqep: QDECCTL:0x0180
[ 1.495516] eqep 48302180.eqep: QPOSINIT:0x00000000
[ 1.495523] eqep 48302180.eqep: QPOSMAX:0xffffffff
[ 1.495530] eqep 48302180.eqep: QPOSCNT:0x00000000
[ 1.495538] eqep 48302180.eqep: omit_interrupt:0
[ 1.495545] eqep 48302180.eqep: QEINT:0x0800
[ 1.495552] eqep 48302180.eqep: QUPRD:0x05f5e100
[ 1.495559] eqep 48302180.eqep: QEPCTL:0x009e write
[ 1.495815] eqep 48302180.eqep: QEPCTL:0x009e read
[ 1.495836] eqep 48302180.eqep: irq:140, clk_rate:100000000
[ 1.496023] eqep 48304180.eqep: ver. 1.0
[ 1.496186] eqep 48304180.eqep: count_mode:0
[ 1.496197] eqep 48304180.eqep: invert_qa:1
[ 1.496205] eqep 48304180.eqep: invert_qb:1
[ 1.496214] eqep 48304180.eqep: invert_qi:0
[ 1.496222] eqep 48304180.eqep: invert_qs:0
[ 1.496231] eqep 48304180.eqep: swap_inputs:0
[ 1.496238] eqep 48304180.eqep: QDECCTL:0x0180
[ 1.496246] eqep 48304180.eqep: QPOSINIT:0x00000000
[ 1.496253] eqep 48304180.eqep: QPOSMAX:0xffffffff
[ 1.496260] eqep 48304180.eqep: QPOSCNT:0x00000000
[ 1.496268] eqep 48304180.eqep: omit_interrupt:0
[ 1.496275] eqep 48304180.eqep: QEINT:0x0800
[ 1.496282] eqep 48304180.eqep: QUPRD:0x05f5e100
[ 1.496289] eqep 48304180.eqep: QEPCTL:0x009e write
[ 1.496296] eqep 48304180.eqep: QEPCTL:0x009e read
[ 1.496316] eqep 48304180.eqep: irq:142, clk_rate:100000000
[ 1.534696] libphy: Fixed MDIO Bus: probed
[ 1.535810] CAN device driver interface
[ 1.537228] c_can_platform 481cc000.can: c_can_platform device registered
(regs=1e9c5c55, irq=42)
[ 1.538288] c_can_platform 481d0000.can: c_can_platform device registered
(regs=cdef3752, irq=43)
[ 1.591729] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq
1000000
[ 1.591745] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 1.592720] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 1.611257] libphy: 4a101000.mdio: probed
[ 1.611288] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00,
driver SMSC LAN8710/LAN8720
[ 1.612665] cpsw 4a100000.ethernet: Detected MACID = d0:39:72:4a:5e:56
[ 1.612809] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ 1.612818] cpsw 4a100000.ethernet: ALE Table size 1024
[ 1.612861] cpsw 4a100000.ethernet: cpts: overflow check period 1250
(jiffies)
[ 1.615053] usbcore: registered new interface driver smsc95xx
[ 1.617107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.617173] ehci-platform: EHCI generic platform driver
[ 1.617542] ehci-omap: OMAP-EHCI Host Controller driver
[ 1.618533] usbcore: registered new interface driver usb-storage
[ 1.622125] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc
not found, using dummy regulator
[ 1.622285] am335x-phy-driver 47401300.usb-phy: Linked as a consumer to
regulator.0
[ 1.626097] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc
not found, using dummy regulator
[ 1.626289] am335x-phy-driver 47401b00.usb-phy: Linked as a consumer to
regulator.0
[ 1.629912] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ 1.629958] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus
number 1
[ 1.630292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 4.19
[ 1.630303] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.630311] usb usb1: Product: MUSB HDRC host driver
[ 1.630318] usb usb1: Manufacturer: Linux 4.19.94-ti-r63 musb-hcd
[ 1.630326] usb usb1: SerialNumber: musb-hdrc.1
[ 1.631182] hub 1-0:1.0: USB hub found
[ 1.631245] hub 1-0:1.0: 1 port detected
[ 1.644075] omap_rtc 44e3e000.rtc: registered as rtc0
[ 1.645748] i2c /dev entries driver
[ 1.649916] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 1.650551] softdog: initialized. soft_noboot=0 soft_margin=60 sec
soft_panic=0 (nowayout=0)
[ 1.654696] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.655277] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 1.655727] omap-aes 53500000.aes: will run requests pump with realtime
priority
[ 1.658332] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 1.662316] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.670276] gnss: GNSS driver registered with major 242
[ 1.680284] NET: Registered protocol family 10
[ 1.751094] Segment Routing with IPv6
[ 1.751253] mip6: Mobile IPv6
[ 1.751410] NET: Registered protocol family 17
[ 1.751442] can: controller area network core (rev 20170425 abi 9)
[ 1.751532] NET: Registered protocol family 29
[ 1.751789] 8021q: 802.1Q VLAN Support v1.8
[ 1.751888] Key type dns_resolver registered
[ 1.751895] mpls_gso: MPLS GSO support
[ 1.752203] ThumbEE CPU extension supported.
[ 1.752219] Registering SWP/SWPB emulation handler
[ 1.752230] omap_voltage_late_init: Voltage driver support not added
[ 1.760551] registered taskstats version 1
[ 1.760562] Loading compiled-in X.509 certificates
[ 1.760690] zswap: loaded using pool lzo/zbud
[ 1.764112] Btrfs loaded, crc32c=crc32c-generic
[ 1.764228] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.930521] tda998x 0-0070: found TDA19988
[ 1.934383] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ 1.934431] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.934437] [drm] No driver support for vblank timestamp query.
[ 2.006703] Console: switching to colour frame buffer device 160x64
[ 2.014319] tilcdc 4830e000.lcdc: fb0: DRM emulated frame buffer device
[ 2.015177] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on
minor 0
[ 2.029590] tps6521x_pwrbutton tps65217-pwrbutton: DMA mask not set
[ 2.030435] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[ 2.031377] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.032478] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.032596] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.037179] cpu cpu0: Linked as a consumer to regulator.3
[ 2.037290] cpu cpu0: Dropping the link to regulator.3
[ 2.037810] cpu cpu0: Linked as a consumer to regulator.3
[ 2.039799] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 2.041420] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
[ 2.043525] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
00:00:00 UTC (946684800)
[ 2.045240] ALSA device list:
[ 2.045256] #0: TI BeagleBone Black
[ 2.051864] Freeing unused kernel memory: 1024K
[ 2.052596] Run /init as init process
[ 2.188291] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101,
bcdDevice= 1.11
[ 2.188309] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.188317] usb 1-1: Product: USB 2.0 Hub
[ 2.189500] hub 1-1:1.0: USB hub found
[ 2.189606] hub 1-1:1.0: 4 ports detected
[ 24.030555] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 25.037831] systemd[1]: System time before build time, advancing clock.
[ 25.086849] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2
default-hierarchy=hybrid)
[ 25.088067] systemd[1]: Detected architecture arm.
[ 25.107130] systemd[1]: Set hostname to <beaglebone>.
[ 26.525529] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/samba/smbd.pid â /run/samba/smbd.pid; please update the unit file
accordingly.
[ 26.551127] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile=
references path below legacy directory /var/run/, updating
/var/run/samba/nmbd.pid â /run/samba/nmbd.pid; please update the unit file
accordingly.
[ 26.750349] systemd[1]: Listening on Syslog Socket.
[ 26.756811] systemd[1]: Created slice User and Session Slice.
[ 26.758180] systemd[1]: Listening on udev Control Socket.
[ 26.760046] systemd[1]: Listening on Journal Audit Socket.
[ 26.760263] systemd[1]: Reached target Remote File Systems.
[ 27.723897] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 29.499328] systemd-journald[1234]: Received request to flush runtime
journal from PID 1
[ 29.917327] musb-hdrc musb-hdrc.1: VBUS_ERROR in a_suspend (88, <AValid),
retry #0, port1 00000507
[ 30.009982] Adding 1202172k swap on /var/cache/swap/swapfile. Priority:-2
extents:3 across:1335296k SSFS
[ 37.674537] net eth0: initializing cpsw version 1.12 (0)
[ 37.789156] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC
LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
[ 37.811092] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.811114] 8021q: adding VLAN 0 to HW filter on device eth0
[ 39.821086] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow
control off
[ 39.821184] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 43.044983] using random self ethernet address
[ 43.045001] using random host ethernet address
[ 43.787175] Mass Storage Function, version: 2009/09/11
[ 43.787200] LUN: removable file: (no medium)
[ 44.373355] using random self ethernet address
[ 44.373373] using random host ethernet address
[ 44.709768] usb0: HOST MAC d0:39:72:4a:5e:59
[ 44.719784] usb0: MAC d0:39:72:4a:5e:58
[ 44.728253] usb1: HOST MAC d0:39:72:4a:5e:5b
[ 44.728596] usb1: MAC d0:39:72:4a:5e:5c
[ 45.056673] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 45.416150] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[ 109.815197] pvrsrvkm: loading out-of-tree module taints kernel.
[ 110.314077] [drm] Initialized pvr 1.17.4948957 20110701 for 56000000.sgx on
minor 1
[ 116.263006] remoteproc remoteproc0: wkup_m3 is available
[ 116.305195] remoteproc remoteproc0: powering up wkup_m3
[ 116.305230] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf,
size 217148
[ 116.305747] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 116.305765] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
[ 116.415088] PM: bootloader does not support rtc-only!
debian@beaglebone:~$
