With the Cape plugged into the console version it gets to a certain point and then shuts off. U-Boot SPL 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000) Trying to boot from MMC2 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone Cape EEPROM: found EEPROM at address: 0x54 BeagleBone Cape EEPROM: debug part_number field:[cape-CBB-Serial] BeagleBone Cape EEPROM: debug part_number field HEX:[636170652d4342422d53657269616c] BeagleBone Cape EEPROM: debug version field HEX:[7230310] BeagleBone Cape EEPROM: 0x54: cape-CBB-Serial-r01.dtbo [0x296d72f] BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2062 bytes read in 47 ms (42 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.19.94-ti-r42 ... 10095592 bytes read in 674 ms (14.3 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.19.94-ti-r42/am335x-boneblack-uboot-univ.dtb ... 162266 bytes read in 152 ms (1 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 867 bytes read in 44 ms (18.6 KiB/s) uboot_overlays: loading /lib/firmware/cape-CBB-Serial-r01.dtbo ... 2245 bytes read in 88 ms (24.4 KiB/s) uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1584 bytes read in 315 ms (4.9 KiB/s) uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... 4915 bytes read in 338 ms (13.7 KiB/s) uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ... 3801 bytes read in 278 ms (12.7 KiB/s) uboot_overlays: [uboot_detected_capes=cape-CBB-Serial,] ... loading /boot/initrd.img-4.19.94-ti-r42 ... 6585227 bytes read in 460 ms (13.7 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait uboot_detected_capes=cape-CBB-Serial, coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... debug: [bootz 0x82000000 0x88080000:647b8b 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f9b8000, end 8ffffb8b ... OK Loading Device Tree to 8f92c000, end 8f9b7fff ... OK Starting kernel ... [ 0.002172] timer_probe: no matching timers found [ 0.196489] l4_wkup_cm:clk:0010:0: failed to disable
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0d2801d74946%24306d8060%2491488120%24%40autoartisans.com.
