I moved the MicroSD card over to the other Beagle. Booted and USB mouse and keyboard (Logitech wireless) work. The Logitech wireless was not discovered on the other Beagle. I think it may be sick. Last login: Fri May 14 18:11:06 2021 from 192.168.0.137 debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh [sudo] password for debian: git:/opt/scripts/:[81709cddd6994c0c6895b5d31a73ac459f252fa0] eeprom:[A335BNLT00C02716BBBK0E8D] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Image 2018-10-07] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot SPL 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000)]:[location: dd MBR] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-g10968f0]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot SPL 2019.04-00002-gbb4af0f50f (Jul 08 2019 - 11:44:39 -0500)]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-gbb4af0f50f]:[location: dd MBR] UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts] UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-14-TI-00A0] UBOOT: Loaded Overlay:[BB-ADC-00A0] UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0] UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0] kernel:[4.14.108-ti-r141] nodejs:[v6.17.0] /boot/uEnv.txt Settings: uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.14.20210416.0-0~stretch+20210416] pkg:[bb-customizations]:[1.20210225.0-0~stretch+20210225] pkg:[bb-usb-gadgets]:[1.20200504.0-0~stretch+20200504] pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~stretch+20200813] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~stretch+20200716] pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~stretch+20200305] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep remote [ 1.108680] remoteproc remoteproc0: wkup_m3 is available [ 1.453877] remoteproc remoteproc0: powering up wkup_m3 [ 1.453993] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 1.458014] remoteproc remoteproc0: remote processor wkup_m3 is now up [ 165.380047] remoteproc remoteproc1: 4a334000.pru is available [ 165.395267] remoteproc remoteproc2: 4a338000.pru is available dmesg | grep pru [ 163.347677] pruss 4a300000.pruss: creating PRU cores and other child platform devices [ 165.380047] remoteproc remoteproc1: 4a334000.pru is available [ 165.380228] pru-rproc 4a334000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully [ 165.395267] remoteproc remoteproc2: 4a338000.pru is available [ 165.395389] pru-rproc 4a338000.pru: PRU rproc node /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully dmesg | grep pinctrl-single [ 0.796710] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 dmesg | grep gpio-of-helper [ 0.809442] gpio-of-helper ocp:cape-universal: ready lsusb Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub END debian@beaglebone:~$ I then created an sd card with this bone-debian-10.3-console-armhf-2020-04-06-1gb.img.xz Login prompt on screen with USB keyboard functioning. This is without the CAN Cape. I've attached the serial port terminal log. Next I'll shut it down and put the cape back. >From the descriptions on https://beagleboard.org/latest-images I can't figure >out what the latest graphical desktop image is for the BBB. Thanks John From: Robert Nelson [mailto:[email protected]] Sent: May-14-21 6:45 PM To: John Dammeyer Cc: Beagle Board Subject: Re: [beagleboard] Configure CAN0 with buildroot Does USB work after 30-45 seconds? If so, still trying to debug that..
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0d1001d74931%24572e8290%24058b87b0%24%40autoartisans.com.
Last login: Sat May 15 02:04:25 UTC 2021 from 192.168.0.104 on pts/0 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debian@beaglebone:~$ sudo reboot [sudo] password for debian: debian@beaglebone:~$ [ 328.622078] watchdog: watchdog0: watchdog did not stop! [ 328.957421] reboot: Restarting system U-Boot SPL 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000) Trying to boot from MMC2 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** U-Boot 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000) CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. RTC 32KCLK Source: External. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/uboot.env ** ** Unable to read "/boot/uboot.env" from mmc0:1 ** Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone Cape EEPROM: no EEPROM at address: 0x54 BeagleBone Cape EEPROM: no EEPROM at address: 0x55 BeagleBone Cape EEPROM: no EEPROM at address: 0x56 BeagleBone Cape EEPROM: no EEPROM at address: 0x57 Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 0 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2062 bytes read in 48 ms (41 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.19.94-ti-r42 ... 10095592 bytes read in 675 ms (14.3 MiB/s) debug: [enable_uboot_overlays=1] ... debug: [enable_uboot_cape_universal=1] ... debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ... loading /boot/dtbs/4.19.94-ti-r42/am335x-boneblack-uboot-univ.dtb ... 162266 bytes read in 152 ms (1 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 867 bytes read in 44 ms (18.6 KiB/s) uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1584 bytes read in 315 ms (4.9 KiB/s) uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... 4915 bytes read in 337 ms (13.7 KiB/s) uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ... 3801 bytes read in 278 ms (12.7 KiB/s) loading /boot/initrd.img-4.19.94-ti-r42 ... 6585227 bytes read in 460 ms (13.7 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] ... debug: [bootz 0x82000000 0x88080000:647b8b 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8f9b8000, end 8ffffb8b ... OK Loading Device Tree to 8f92c000, end 8f9b7fff ... OK Starting kernel ... [ 0.002164] timer_probe: no matching timers found [ 0.195781] l4_wkup_cm:clk:0010:0: failed to disable [ 1.411997] omap_voltage_late_init: Voltage driver support not added Debian GNU/Linux 10 beaglebone ttyS0 BeagleBoard.org Debian Buster Console Image 2020-04-06 Support: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian default username:password is [debian:temppwd] beaglebone login:
