On Fri, May 14, 2021 at 9:24 PM John Dammeyer <[email protected]> wrote: > > I moved the MicroSD card over to the other Beagle. Booted and USB mouse and > keyboard (Logitech wireless) work. The Logitech wireless was not discovered > on the other Beagle. > > > > I think it may be sick. > > > > > > Last login: Fri May 14 18:11:06 2021 from 192.168.0.137 > > debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh > > [sudo] password for debian: > > git:/opt/scripts/:[81709cddd6994c0c6895b5d31a73ac459f252fa0] > > eeprom:[A335BNLT00C02716BBBK0E8D] > > model:[TI_AM335x_BeagleBone_Black] > > dogtag:[BeagleBoard.org Debian Image 2018-10-07] > > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot SPL > 2019.04-g10968f0 (Feb 19 2021 - 21:40:51 +0000)]:[location: dd MBR] > > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot > 2019.04-g10968f0]:[location: dd MBR] > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot SPL > 2019.04-00002-gbb4af0f50f (Jul 08 2019 - 11:44:39 -0500)]:[location: dd MBR] > > bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot > 2019.04-00002-gbb4af0f50f]:[location: dd MBR] > > UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts] > > UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-14-TI-00A0] > > UBOOT: Loaded Overlay:[BB-ADC-00A0] > > UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0] > > UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0] > > kernel:[4.14.108-ti-r141] > > nodejs:[v6.17.0] > > /boot/uEnv.txt Settings: > > uboot_overlay_options:[enable_uboot_overlays=1] > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] > > uboot_overlay_options:[enable_uboot_cape_universal=1] > > pkg check: to individually upgrade run: [sudo apt install --only-upgrade > <pkg>] > > pkg:[bb-cape-overlays]:[4.14.20210416.0-0~stretch+20210416] > > pkg:[bb-customizations]:[1.20210225.0-0~stretch+20210225] > > pkg:[bb-usb-gadgets]:[1.20200504.0-0~stretch+20200504] > > pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~stretch+20200813] > > pkg:[kmod]:[23-2rcnee1~stretch+20171005] > > pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~stretch+20200716] > > pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~stretch+20200305] > > groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev > users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi > tisdk weston-launch xenomai] > > cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M > net.ifnames=0 quiet] > > dmesg | grep remote > > [ 1.108680] remoteproc remoteproc0: wkup_m3 is available > > [ 1.453877] remoteproc remoteproc0: powering up wkup_m3 > > [ 1.453993] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217148 > > [ 1.458014] remoteproc remoteproc0: remote processor wkup_m3 is now up > > [ 165.380047] remoteproc remoteproc1: 4a334000.pru is available > > [ 165.395267] remoteproc remoteproc2: 4a338000.pru is available > > dmesg | grep pru > > [ 163.347677] pruss 4a300000.pruss: creating PRU cores and other child > platform devices > > [ 165.380047] remoteproc remoteproc1: 4a334000.pru is available > > [ 165.380228] pru-rproc 4a334000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@34000 probed successfully > > [ 165.395267] remoteproc remoteproc2: 4a338000.pru is available > > [ 165.395389] pru-rproc 4a338000.pru: PRU rproc node > /ocp/pruss_soc_bus@4a326004/pruss@0/pru@38000 probed successfully > > dmesg | grep pinctrl-single > > [ 0.796710] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size > 568 > > dmesg | grep gpio-of-helper > > [ 0.809442] gpio-of-helper ocp:cape-universal: ready > > lsusb > > Bus 001 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver > > Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > END > > debian@beaglebone:~$ > > > > I then created an sd card with this > > bone-debian-10.3-console-armhf-2020-04-06-1gb.img.xz > > Login prompt on screen with USB keyboard functioning. > > This is without the CAN Cape. I've attached the serial port terminal log. > > > > Next I'll shut it down and put the cape back. > > > > From the descriptions on https://beagleboard.org/latest-images I can't figure > out what the latest graphical desktop image is for the BBB.
There really isn't an official lxqt release, it just was too un-useful: https://rcn-ee.net/rootfs/bb.org/testing/2021-04-27/ Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYg4mkM1X14q76Y8C9s_2KrZGwS3H13E4Std7RtRDewKwg%40mail.gmail.com.
