On Tue, 30 Jul 2002 11:00:09 -0500 (CDT), you wrote:
>Try this:
>
>find / -type d -maxdepth 1 | egrep -v "home|proc|^/$" | xargs du -sh
>
>That should show usage of each directory in /, not including /home and
>/proc.
Or, just for variety:
du -h -x --max-depth=1 --exclude=home --exclude=proc
Can the two PC see each other? (use ping). If yes,
you can setup Mozilla by going to Edit > Preferences >
Advanced > Proxies.
BTW, what modem are you using? why not put the modem
to the Linux box and let it act as your server? It's
a good thing to learn. :)
hth.
lh
=
---
I am using RH 7.0 server .. But last one month i have faced a problem
with the server ...on a certain time after a interval 3/3 day we cant
access the server .. but the server is running ..After rebooting we can
access it again ...
So i am in real trouble ..
Hi all,
I'm a complete newbie & need some help here...
I need to uninstall rh 7.3 from an old machine...I thought I'd be able to
boot to a DOS floppy, then use fdisk to reformat the drive...but no!
Whatever I do I can't stop the machine booting to GRUB...even when I change
the bios to boot from
On 7/27/02 9:56 AM, "KnowHow Tech Support" <[EMAIL PROTECTED]> wrote:
>> Not only for kids: http://www.cristina.org/
>>
>> But great idea, and I think you have a complimentary service.
>>
>
> Thanks for the compliment. We work very hard around here to help people.
> I was thinking about prima
On Wed, Jul 31, 2002 at 12:00:01AM -0400, [EMAIL PROTECTED] wrote:
> Assuming it is possible, where can I get info on how to upgrade existing drive with
>RH7.0 to RH7.3 without losing files on existing set-up? Have downloaded the three iso
>images from RH to my drive but can't find either on RH
Assuming it is possible, where can I get info on how to upgrade existing drive with
RH7.0 to RH7.3 without losing files on existing set-up? Have downloaded the three iso
images from RH to my drive but can't find either on RH site or in the iso files how to
proceed without writing to cd.
_
On Tue, 2002-07-30 at 18:59, Edward Dekkers wrote:
>
> Sidenote: Where's the location of the list archives for my notes?
>
Here ya go Ed.
http://www.prairienet.org/library/redhat/
Bret
--
redhat-list mailing list
Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.re
Ed - Thanks for the reply that was it Linuxconf had the IRQ values set
to one value, even though I was changing the values within modules.conf. Im
guessing linuxconf was overridding my changes. Once I changed both and
rebooted, everything corrected itself.
Thanks,
~dK
-Original Mes
I have a bootable iso image that have been asked to add an additional file
to. I can not remember how to do this will keeping the disk bootable. Does
anyone know?
Also, a while back (quite a while) someone said that an ISO image could be
mounted rw under linux and edited. While I can mount the fs
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 30 July 2002 10:37 pm, Joe Giles wrote:
> Is there a preset variable in Linux that stores your IP address?
>
> I use DHCP, and I would like to use an IP variable (If one exists) to
> set my DISPLAY option... Can anyone help ?
>
> Example
>
-Original Message-
From: Edward Dekkers [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, July 30, 2002 6:42 PM
To: [EMAIL PROTECTED]
Subject: Re: How to get Tulip.o to load automatically at Startup -PLZ
HELP!
> I had tulip.o loading automatically upon start(This was configured
> automatically
On Wed, Jul 31, 2002 at 02:37:16AM -, Joe Giles wrote:
> Is there a preset variable in Linux that stores your IP address?
>
> I use DHCP, and I would like to use an IP variable (If one exists) to set my DISPLAY
>option... Can anyone help ?
>
> Example
>
> display=$MYIP:0;export display
>
I would love some ideas about a recent issue that has
cropped up.
Running RH 7.3 w/ KDE gui
and for some reason, the system has decided not to let me play anymore.
When powered, the Linux kernel seems
to load and the system ‘appears’ to boot normally. We get to the RedHat
splash scree
Is there a preset variable in Linux that stores your IP address?
I use DHCP, and I would like to use an IP variable (If one exists) to set my DISPLAY
option... Can anyone help ?
Example
display=$MYIP:0;export display
There $MYIP would be the actual Linux variable to export...
Thanks
Joe G
Hello Aly,
Tuesday, July 30, 2002, 9:16:11 PM, you textually orated:
OK. This message is just filled with misstatements, opinions and factual
errors. Let's clarify things...
AD> As I also mentioned that Sendmail is a system that makes use of the mbx format
AD> which is pretty unreliable, one
> I had tulip.o loading automatically upon start(This was configured
> automatically when I installed it).. Somehow last night something got
> messed up with my net connection and Tulip.o was dropped from the kernal.
I
> used Insmod to reload it and it works but it doesnt reload the module when
I
hi Chris,
What i did for my mrtg setup is just as below, but this only monitor based
on machine ip
- install mrtg rpm package
- create mrtg config file using cfgmaker as
cfgmaker --global "WorkDir: /var/www/html/mrtg" \
--global "Options[_]: growright,bits" \
--ifref=ip \
--output /etc
As I mentioned then you want to look at Uni of Washington's Imap server. You can
look thru' and the best way to compile it would be to compile it as RedHat
Linux 7.2 I don't think that 7.3 is that invariably different so as to choke the
compilation.
As I also mentioned that Sendmail is a sys
On 30 Jul 2002, Andy Schuler wrote:
> Since you're building your mail server from source why not look at qmail
> instead of sendmail? It has many advantages over sendmail, one of the
> major ones being security. There are some great step-by-step toasters
> out there for building qmail on a linux s
On Tue, Jul 30, 2002 at 02:45:50PM +0100, Wesley wrote:
> Would anyone mind if I posted my XF86Config-4 file?
>
> I have found only three guides to doing this on the net, none work.
>
> Wez
>
>
Well. I have found the official Xinerama-HOWTO to be the best doc for
manually setting up my XF86Con
Thanks for all advise...
The following one work well... Thanks!
- Original Message -
From: "Anthony E. Greene" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, July 30, 2002 1:43 AM
Subject: Re: send mail w command line??
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> O
** Reply to message from Mike Burger <[EMAIL PROTECTED]> on Tue, 30 Jul 2002
18:51:41 -0500 (EST)
> service ipchains stop
> chkconfig ipchains off
> rmmod ipchains
> insmod iptables
> service iptables start
> chkconfig iptables on
>
> After that, it's just a matter of putting together a decent
More power to you. Sendmail is a good product, but Postfix is much easier to set up,
and to be the admin of.
Date: Tue, 30 Jul 2002 15:36:29 -0700
From: "daniel" <[EMAIL PROTECTED]>
Subject: Re: mail server from source saga continues
To: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTE
I had tulip.o loading automatically upon start(This was configured
automatically when I installed it).. Somehow last night something got
messed up with my net connection and Tulip.o was dropped from the kernal. I
used Insmod to reload it and it works but it doesnt reload the module when I
reboot
yup. you are a demigod.
it works great!!!
Thank you
Thank you
Thank you
eric
Gregory Hosler wrote:
>
> On 28-Jul-02 clover wrote:
> > hello,
> > i used to have a 6.2 machine. i wiped
> > everything and install 7.3. i also changed the
> > advansys to an adaptec aha-2940w/2940uw scsi
> >
> I have a FireWire hard drive and I am trying to mount it under RH 7.3. I
am
> not sure how to do this. I noticed a FireWire module on my system, so I'm
> pretty sure that there is support for it, how do I reference it, though?
Do
> I need drivers specifically for the hard drive? It is a Maxto
On 30 Jul 2002, Anthony Abby wrote:
> Actually I thought it ran BOTH of them by default. In all the times
> I've installed 7.3 both were loaded and both started as services by
> default. I always have to go in an turn off ipchains.
Well, their startup scripts both exist by default. However, y
service ipchains stop
chkconfig ipchains off
rmmod ipchains
insmod iptables
service iptables start
chkconfig iptables on
After that, it's just a matter of putting together a decently configured
set of firewall rules.
On Tue, 30 Jul 2002 [EMAIL PROTECTED] wrote:
> How can I switch it so I am us
You could just install the php_mysql package.
On Mon, 29 Jul 2002, Joel Lopez wrote:
> Hi,
>
> I installed PHP and PostgreSQL when I installed RedHat 7.2, I would now like to use
>MySQL with PHP. Does anyone know how I go about doing this. I have already
>installed MySQL and it is working
tty1 is the first console. Are you sure you hadn't logged into the
console, and forgotten to log out?
On Tue, 30 Jul 2002, Freivald, Joseph A, SOFED wrote:
> I made a Linux firewall using IPTABLES on RedHat 7.3 when I got my cable modem
>recently, and I have noticed in the logs that there are
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 30 July 2002 05:24 pm, daniel wrote:
> these are my options for the build:
>
> lnx Linux with traditional passwords and crypt()
> lnp Linux with PAM
> lrh Redhat Linux 7.2
> lsu SuSE Linux
> s14 Linux using -lshadow to get the cr
> ATTACHMENT part 3.2 message/rfc822
> Date: 28 Jul 2002 05:01:48 -
> From: "Abhilash Varghese" <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Not able to telnet to linux redhat 7.2
>
> Hi All,
>
> I have installed Redhat Linux 7.2 on an Intel Pentium 4 system on
> a hard disk part
Which, of course, would only address inbound connections, not outbound
masquerading.
On Tue, 30 Jul 2002, Jim Bowen wrote:
> There is no equivalent in ipchains - full NAT was only introduced in
> iptables. The closest you could get in ipchains would be lots of port
> forwarding.
>
> Jim
>
> -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 30-Jul-2002/15:36 -0400, "Chapman, Matt" <[EMAIL PROTECTED]> wrote:
>All my Exchange 2000 servers point to a single server to send mail out
>via Trend. The only reason is so a message can be attached at the
>bottom.
>
>I would like to have those s
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 30-Jul-2002/13:34 -0500, [EMAIL PROTECTED] wrote:
>How can I switch it so I am using iptables and not ipchains
1. Create a script with all the commands to setup an iptables firewall
that does what you want. Be sure to include the command "
i've already compiled, installed and configured sendmail and that's what i
want to use. my problem is with imap/pop3.
_
daniel a. g. quinn
starving programmer
the tree of liberty must be refreshed from time to time with the blood of
patriots.
- thomas jefferson
Actually I thought it ran BOTH of them by default. In all the times
I've installed 7.3 both were loaded and both started as services by
default. I always have to go in an turn off ipchains.
Anthony
On Tue, 2002-07-30 at 14:34, [EMAIL PROTECTED] wrote:
> How can I switch it so I am using iptabl
On Tue, 2002-07-30 at 12:16, David Kobler wrote:
> I need help creating an admin user that has rights to create users and
> change passwords on my rh 7.3 box. I could use the root account to do this,
> but I do not want to give the root password to others in my office. Any
> suggestions?
>
>
>
Well if we are building from scratch I would put in my vote for Exim, having
used it for a couple of large projects, I have found that its widely maintained
and isn't sorry to say stagnant like Qmail is, there hasn't been a release of
Qmail past 1.03 I would say and that Exim has matured to 4.x
Cant you also just stop ipchains from starting... IPCHAINS and IPTABLES are started
from the init.d process... By not starting IPCHAINS, IPTABLES should take over. That
way, you can have both installed. I use both to do different things, but you can
dissable one and use the other...
Thoughts?
[EMAIL PROTECTED] wrote:
>
> How can I switch it so I am using iptables and not ipchains
rpm -ev ipchains lokkit
That removes ipchains. Then just configure iptables, and it will run fine.
--
redhat-list mailing list
Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listma
Thanks!
yeah, the /root directory had a huge 6.5GB tmp ark archive...
I don't know what made that.. but its gone now. I should have looked more
closely at the directories, the /root directory in konqorer said it had a
negative few billion bytes... odd... the command line said 6.6GB... anyway,
| Well, you might want to install the imap rpm and then turn on the pop3
| server just to see if it works. This is pretty simple and you can easily
| remove the package after testing.
|
| This should show you whether the problem is with the client config or
| whether you have a problem with the p
How can I switch it so I am using iptables and not ipchains
i use mirror (avaliable at
http://sunsite.doc.ic.ac.uk/packages/mirror/), but rsync should work,
too (if your mirror supports rsync)
works fine
On Tue, 2002-07-30 at 17:03, Martín Marqués wrote:
> Is there a way to sync the updates of some RH distributions (6.2, 7.2 and 7.3
> I need) in another
Hi all,
I just installed redhat 7.2 on a pc and trying to register it with redhat
network using rhn_register. I already created an account at redhat website.
But, when I use rhn_register, after entering my userid, passowrd and email,
it gives me a segmentation fault.
can some one point me what mi
Bill,
That did exactly what I wanted it to do! Thank you!
Steven Hill
Greenfield, MA USA
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Bill Rugolsky Jr.
Sent: Tuesday, July 30, 2002 3:42 PM
To: [EMAIL PROTECTED]
Subject: Re: mounted file systems
O
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 30-Jul-2002/15:16 +, Christensen Tom <[EMAIL PROTECTED]> wrote:
>
>FilesystemSize Used Avail Use% Mounted on
>/dev/hda2 21G 15G 6.0G 71% /
>/dev/hda1 23M 20M 1.9M 92% /boot
>/dev/hda5
On Tue, 2002-07-30 at 12:02, daniel wrote:
> 'cause i'm "practicing" for a linux build on a machine that won't be big
> enough for a redhat install. besides, i want to learn how to do things from
> source and not be dependant of pre-made packages. it breeds problems just
> like this one where i
On Tue, Jul 30, 2002 at 03:26:14PM -0400, Steven Hill wrote:
> I forgot to mention that this is under RH7.3
1. The correct file is /etc/fstab, not /etc/mtab.
/etc/mtab tells you what is currently mounted.
2. /etc/mtab can get corrupted. (In fact, you corrupted it!)
Trust /proc/m
> | Why didn't you just install Redhat's pop3 server rpm (actually it's
> the | imap rpm). It the UW pop3 package and would have saved you the
> trouble of | building it and perhaps not including something needed?
>
> 'cause i'm "practicing" for a linux build on a machine that won't be big
> eno
The source, if you installed it, will be in /usr/src/linux-2.4 (actually a
symlink to 2.4.18-3 :^)
>From there:
make mrproper # cleans up any old stuff laying about
cp configs/kernel-2.4.18-i686-smp.config .config# Copy one of
redhats configs as a starting point
make menuconfig/xconfi
Hi,
This is my scenario:
All my Exchange 2000 servers point to a single server to send mail out
via Trend. The only reason is so a message can be attached at the
bottom.
I would like to have those servers point to a Red Hat box that runs
sendmail (no local accounts), opens procmail and does th
I forgot to mention that this is under RH7.3
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, July 30, 2002 3:16 PM
> To: [EMAIL PROTECTED]
> Subject: mounted file systems
>
> I was wondering what I need to do in order to excha
In the past I've used the 3c59x driver for 3c905b and 3c905c, without any
noticeable problems. If you want to compile the driver from 3com's site you
can do this without rebuilding the kernel. The driver you downloaded is a
module, so it can be compiled by itself and then loaded into the kernel
I was wondering what I need to do in order to exchange the /home and /var
file systems. The way it was defaulted, the /home file system is much larget
than I would ever need, and the /var file system is much smaller than I will
need. It just so happens that they would probably be just fine if they
Hello,
I have a FireWire hard drive and I am trying to mount it under RH 7.3. I am
not sure how to do this. I noticed a FireWire module on my system, so I'm
pretty sure that there is support for it, how do I reference it, though? Do
I need drivers specifically for the hard drive? It is a Maxt
| Why didn't you just install Redhat's pop3 server rpm (actually it's the
| imap rpm). It the UW pop3 package and would have saved you the trouble of
| building it and perhaps not including something needed?
'cause i'm "practicing" for a linux build on a machine that won't be big
enough for a re
> so i managed to install sendmail
> and configure it properly (i hope)
> and then i went searching for pop3/imap daemons
> and decided on the university of washington's ipop3 server
> built it,
> installed it
>
> and here's the good news:
> i _can_ connect to the linux box from a windows box v
How are you working out that there is only 7Gb used?
Also, is there anything stored on /home or /boot if you un-mount the fs's
there?
-Original Message-
From: Christensen Tom [mailto:[EMAIL PROTECTED]]
Sent: 30 July 2002 16:17
To: [EMAIL PROTECTED]
Subject: Re: disk usage
Filesystem
Hello:
I normally build my kernels from source. I am building a 2.2.17
kernel on a 6.2 box. How do I get the 3Com driver "3c90x" to compile
in with the new kernel?
The 3c90x.c and 3c90x.h files were not originally included in the
source distribution and I have them from 3Com's website. I have
so i managed to install sendmail
and configure it properly (i hope)
and then i went searching for pop3/imap daemons
and decided on the university of washington's ipop3 server
built it,
installed it
and here's the good news:
i _can_ connect to the linux box from a windows box via pop3
but the b
On Tue, 2002-07-30 at 00:00, Sweet Chuck wrote:
>
> I have a Sony Tape Stacker attached to an adaptec 2940UW. When booting
> it detected the medium changer and the tape drive. Also, if I 'cat
> /proc/scsi/scsi' I get the following:
>
> Attached devices:
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
loophole wrote:
> try this:
>
> linux apic
I did do this and it still resulted in a kernel panic.
>
>
> also, try to do the install **WITHOUT** convertin the
> partitions to ext3.
I also tried this and it resulted in the same kernel panic.
Since I posted this to the redhat-list I have learned
Use rsync - one command does it all. You'll have to various redhat mirrors
to see if they run an rsync'd server for the updates directory.
-eric
- Original Message -
From: "Martín Marqués" <[EMAIL PROTECTED]>
> Is there a way to sync the updates of some RH distributions (6.2, 7.2 and
On 2002.07.30 12:16 David Kobler wrote:
> I need help creating an admin user that has rights to create users and
> change passwords on my rh 7.3 box. I could use the root account to do
> this,
> but I do not want to give the root password to others in my office.
> Any
> suggestions?
Check the su
Have a look at sudo. You can give an arbitrary user permissions to execute specific
commands as root.
On Tue, Jul 30, 2002 at 11:16:05AM -0500, David Kobler wrote:
> I need help creating an admin user that has rights to create users and
> change passwords on my rh 7.3 box. I could use the root
I need help creating an admin user that has rights to create users and
change passwords on my rh 7.3 box. I could use the root account to do this,
but I do not want to give the root password to others in my office. Any
suggestions?
--
redhat-list mailing list
Unsubscribe mailto:[EMAIL PRO
On Tue, 2002-07-30 at 11:16, Christensen Tom wrote:
>
> FilesystemSize Used Avail Use% Mounted on
> /dev/hda2 21G 15G 6.0G 71% /
> /dev/hda1 23M 20M 1.9M 92% /boot
> /dev/hda5 14G 1.8G 11G 13% /home
> none 250M 0
There is more to a bootdisk than a kernel image...
> rdev bzImage /dev/fd0
Change the kernel file to look for / (root fs) on /dev/fd0
This probably isn't what you want
> rdev bzImage 49152
You've got me with this one, it isn't a valid syntax, thought is seems to
interpret it as a major/m
I am running RedHat 7.3 on a VA Linux FullOn 2250 server. It has a Mylex
DAC960 A150 RAID controller. Now RedHat ships with a driver, but my system
hangs when loading the driver. I have booted into "rescue" mode from the CD
and I want to install the updated driver and patch for the Mylex card,
how
On Tue, 30 Jul 2002, Christensen Tom wrote:
>
> FilesystemSize Used Avail Use% Mounted on
> /dev/hda2 21G 15G 6.0G 71% /
> /dev/hda1 23M 20M 1.9M 92% /boot
> /dev/hda5 14G 1.8G 11G 13% /home
> none 250M 0 250M
Edit /etc/xinetd.d/telnet and change the disabled flag to no. Then restart
xinetd with the command:
/etc/rc.d/xinit.d/xinetd restart
AE
-Original Message-
From: Abhilash Varghese [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 28, 2002 1:02 AM
To: [EMAIL PROTECTED]
Subject: Not able to t
I installed php when I installed redhat but with postgresql and not
mysql. I have now installed the mysql rpm and would like to configure
php to use it. Does anyone know how to do this?
thanks,
Joel
I have already told you. Nevermind...
Locate a package named php-mysql-x.x.x-x.rpm in your in
FilesystemSize Used Avail Use% Mounted on
/dev/hda2 21G 15G 6.0G 71% /
/dev/hda1 23M 20M 1.9M 92% /boot
/dev/hda5 14G 1.8G 11G 13% /home
none 250M 0 250M 0% /dev/shm
but, like I said, I can only account for a
On Tue, Jul 30, 2002 at 09:58:00AM -0400, Matthew Galgoci wrote:
> in the list headers, I've added:
>
> Unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
BRAVO! Thanks a mil! Much appreciated!
[...]
> The footer also now begins with "--", which should prevent the footers
> from being in
> Date: Tue, 30 Jul 2002 21:51:54 +0900
> Subject: Any way to turn off KDE sound notifications?
> From: Doug Lerner <[EMAIL PROTECTED]>
>
> Is there any way to turn off KDE sound notifications? For example -
> the sounds made when opening and closing windows...?
>
> The obvious way looks like i
** Reply to message from Joel Lopez <[EMAIL PROTECTED]> on Mon, 29 Jul 2002
19:38:33 -0700
> Hi,
>
> I installed PHP and PostgreSQL when I installed RedHat 7.2, I would now like to use
>MySQL with PHP. Does anyone know how I go about doing this. I have already
>installed MySQL and it is w
I've added the extra space. Pine seems to do the right thing. Mutt, at
least as I have it configured, does not.
On Tue, 30 Jul 2002, Javier Gostling wrote:
> On 2002.07.30 09:58 Matthew Galgoci wrote:
> > The footer also now begins with "--", which should prevent the footers
> > from being inc
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 30-Jul-2002/09:58 -0400, Matthew Galgoci <[EMAIL PROTECTED]> wrote:
>The footer also now begins with "--", which should prevent the footers
>from being included in every single reply. Yah!
Actually, you changed the footer to "__" when it should be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 30-Jul-2002/08:01 -0400, Michael Fratoni <[EMAIL PROTECTED]> wrote:
>On Tuesday 30 July 2002 07:50 am, Anthony E. Greene wrote:
>> On 30-Jul-2002/06:26 -, shyam <[EMAIL PROTECTED]> wrote:
>> >can anybody tell me ,how do i configure email serv
On Tue, Jul 30, 2002 at 06:50:24AM -0400, Ben Logan wrote:
> On Tue, Jul 30, 2002 at 06:22:48AM -0400, Ben Logan wrote:
> > On Tue, Jul 30, 2002 at 10:16:36AM +0100, Nick Lindsell wrote:
> > > Only one way to find out -- try it.
> > > Alas the oldest box I have is 7.2 so can't help you much there.
Is there a way to sync the updates of some RH distributions (6.2, 7.2 and 7.3
I need) in another fashion then using wget? I have repeated versions of
openssh, for example, with wget.
Saludos... :-)
--
Porqué usar una base de datos relacional cualquiera,
si podés usar PostgreSQL?
-
Hi All,
I have a RH 72 server for which I would like to create a custom bootdisk
using rdev. The following are the steps I performed:
rdev bzImage /dev/fd0
rdev bzImage 49152
rdev -R bzImage 0
dd if=/boot/bzImage of=/dev/fd0
I need this bootdisk for using Parition Image for Linux, the standard
Have you looked at /etc/xinetd.d
This directory will have some configuration files you might want to edit, by
default most network related programs are disabled.
-Original Message-
From: Abhilash Varghese [mailto:[EMAIL PROTECTED]]
Sent: Sunday, July 28, 2002 1:02 AM
To: [EMAIL PROTECTE
On 2002.07.30 09:58 Matthew Galgoci wrote:
> The footer also now begins with "--", which should prevent the footers
> from being included in
> every single reply. Yah!
Shouldn't it be "-- " (Note the space)?
Cheers,
--
Javier Gostling
Ingeniero de Sistemas
Virtualia S.A.
[EMAIL PROTECTED]
Fono:
>I installed PHP and PostgreSQL when I installed RedHat 7.2, I would
now like to use MySQL with PHP. Does anyone >know how I go about doing
this. I have already installed MySQL and it is working fine. But I
can't figure out how to >enable MySQL support in PHP.
install php-mysql-*.rpm as well
I installed php when I installed redhat but with
postgresql and not mysql. I have now installed the mysql rpm and would
like to configure php to use it. Does anyone know how to do
this?
thanks,
Joel
Try this. This is a very good book on device drivers.
http://www.xml.com/ldd/chapter/book/index.html
On Monday, July 29, 2002 5:07 AM, Manoj [SMTP:[EMAIL PROTECTED]]
wrote:
> Hello Friends,
>
> I do not know if this is the right forum for discussing this,
>
> I want to write a USB system with
This is what worked for me.
alias scsi_hostadapter aha1542
options aha1542 aha1542=0x330,11,7
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Edward Dekkers
Sent: Thursday, July 18, 2002 9:58 PM
To: [EMAIL PROTECTED]
Subject:Re: Adaptec
Title: Empty Stationery
I'm not more expirence in printing, so when I
bought Lexmark z13 and I've installed Lexmark z13
Linux driver and ENSCRIPT utility. I did check that
LPD is running well. But then I did see following:
[root@localhost root]# lpr -Plexmarkz13
testfileStatus Information:
hi,
i have just installed redhat 7.3 on my pc. i want to register the product
and avail of the redhat network but i don't know how to connect to the
internet. the modem is attached to a win95 pc running the Proxy Server. what
do i need and must be done and configure so that i can connect to the
i
You might have to recompile your kernel for SCSI tape support. I know I
did for our DDS drives. Good luck,
Hidong
Sweet Chuck wrote:
>
> I have a Sony Tape Stacker attached to an adaptec 2940UW. When booting
> it detected the medium changer and the tape drive. Also, if I 'cat
> /p
to know which kernel... we can
use..
uname -r
Hi,
I installed PHP and PostgreSQL when I installed
RedHat 7.2, I would now like to use MySQL with PHP. Does anyone know
how I go about doing this. I have already installed MySQL and it is
working fine. But I can't figure out how to enable MySQL support in
PHP.
thanks,
Joel
hi there,
under the gnome control center on a rh 7.1 machine
sawfish window manager->shortcuts
for whatever context choice, clicking on add/edit will offer you a
list of possible commands to assign to some key you select (grab).
one of the command choices is 'move cursor right'. in sel
The Limbo beta of Red Hat Linux has been updated. New in this release include:
- improved package customization in the installer
- redhat-config-packages - The Red Hat graphical package management
tools
- gcc-3.2 prerelease - the soon-to-be released gcc-3.2 allows for
better ABI compatibility
biggest problem with gnumeric is that it can only save in excel 95
format - as far as i can tell it can not save in excel 2000 format. this
is a problem in many business environments.
does anyone know if there is a plan to integrate excel 2k formatting.
On Sun, 2002-07-28 at 16:50, Reuben D. Bud
The BOOT.INI file in Windows maps where it expects to find certain files.
And it includes partition and drive information in it. You have to edit
this file even if just a partition before Windows changes on a single hard
drive.
In your case (I haven't tried this, adding another hard drive with W
1 - 100 of 142 matches
Mail list logo