-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
>About six months ago, there was a lot of excitement about a Delphi clone
for
>Linux. Has anyone heard anything of the project since then?
I've just been to the Borland Conference here in Brisbane, Australia. The
project you are thinking of is calle
> On Fri, 19 Nov 1999, Arni Raghu wrote:
>
> > I have ppp link.so the dns server cannot be contacted..!!
>
> Uh yes it can...
How!!..when the machine is booting up the ppp link is not up!!
>
> > I blanked out all the lines in the /etc/resolv.cof and then
rebooted..no
> > luck...any ideas.??
>
Hi Yoink,
Thanks for your reply. My target to setup a web server coming with RH 6.0
is for fun as I am only an amateur. I have penetrated the documents in the
e-books, understanding that there are 3 files needed to config;
- httpd.conf
- access.conf
- srm.conf
and firewall setup. But they ar
Stop overclocking and we'll help you if the problem stays. I suspect it will
go away.
On Sat, 20 Nov 1999, Robert A. Hayden wrote:
> I have a new dual-celeron 550 system I just got running with a Abit BP6
> motherboard and two IBM IDE Hard drives attached to the 33mb chain. I am
> using Redhat 6
On Fri, 19 Nov 1999, Hal Burgiss wrote:
> On Fri, Nov 19, 1999 at 10:56:10AM -0500, jack wallen, jr. wrote:
> > where is a good place to get the latest kernel rpms?
>
> rawhide generally has fairly current kernels available. Now it is
> 2.2.12-42. Mandrake seems to have more recent ones, but I
On Fri, 19 Nov 1999 [EMAIL PROTECTED] wrote:
> I just recompiled my kernel and rebooted and my pc hangs on "Finding
> modules"
did you run /sbin/lilo and correct any errors before rebooting?
do you do a make modules;make modules_install in your /usr/src/linux-whatever
directory.
> I don't really
On Fri, 19 Nov 1999, Phil Risby wrote:
> I have now running Mandrake which was a RedHat 6.0 till very recently
> One rather expensive application which ran under RedHat 6 nmow gives this error
> on startup
>
> Tcl-Init failed
do you have Tcl rpm's installed? I'm using version tcl-8.0.4-29, try u
http://www.redhat.com/corp/support/hardware/
Apparantly yes, read the above page to make sure. It appears to be a hisax
based isdn, so you should be okay.
On Fri, 19 Nov 1999, Phil Merricks wrote:
> Is there any software available to use an Eicon Diva Picolla internal ISA
> ISDN card under Linu
On Fri, 19 Nov 1999, Luis Pablo Gasparotto wrote:
> I´ve recently compiled the 2.2.12 Kernel with Loadable Module Support
> I can install soundcore and msnd modules with no problem. But when I try
> to install
> the msnd_pinnacle module this happens:
>
> insmod msnd_pinnacle cfg=0x260 io=0x290
On Fri, 19 Nov 1999, Luis Pablo Gasparotto wrote:
> When I boot my computer I see the following message:
>
> /dev/hda6 was not cleanly unmounted, check forced (frezees for almost a
> minute and then continue)
> ...
>
> What it mean?
Your drive was not unmounted when your computer was shut down.
I have a new dual-celeron 550 system I just got running with a Abit BP6
motherboard and two IBM IDE Hard drives attached to the 33mb chain. I am
using Redhat 6.0 as my base due to difficulties with getting 6.1 to
install.
The kernel is now reporting during instances of high disk activity on on
t
On Fri, 19 Nov 1999, Arni Raghu wrote:
> I have ppp link.so the dns server cannot be contacted..!!
Uh yes it can...
> I blanked out all the lines in the /etc/resolv.cof and then rebooted..no
> luck...any ideas.??
Don't do that, it's just making your problem worse... if nslookup isn't
working,
To mount a external zip drive(parallel port)? a shortcut would be:
login as root, issue:
mkdir /mnt/zip
put the following in the file /etc/conf.modules:
alias parport_lowlevel parport_pc
options parport_pc.o io=0x378
restart the computer and issue
On Fri, 19 Nov 1999, patrick said:
p>I am having a HELL of a time with what should be really simple
p>graphics work.
p>Basically, I can't find any graphics tools for linux that
p>can handle really simple graphics work.
p>
p>IS THERE ANY graphics app available for linux that can
p>actually impo
I got the new upgrade from RedHat an rpm named wu-ftpd-2.6.0-1,and every
time i try to connect to the server takes up to 2~3 minutes to log in,if i
remove this update and install the original one all becomes normal again,do
i have to configure some file after instaling the new pack?Like was the
I just recompiled my kernel and rebooted and my pc hangs on "Finding
modules"
I don't really understand how to make an initrd img though. Do I need
one?
read-only
#this is my new kernel
image=/boot/bzImage
label=bzImage
JACOB R JOHNSON
Internet - [EMAIL PROTECTED]
--
To un
> > I was forced to cycle the power on my linux box, since then I have
> > lost the cursor on tty screens.
> >
> > 'mt' caused the problem that required I cycle power, but I was
> > running 'screen' at the time in a telnet session.
> >
> > Anyone got any suggestions as to how to get the curs
On Fri, Nov 19, 1999 at 10:36:36PM -0500, John P. Verel wrote:
> Evening. I'm considering a new machine which is to have a re-writable CD
> and two USBs. I'd appreciate hearing comments on compatibility of these
> devices. I'm inclined to believe the CD RW is okay but I'm unclear as to
> US
I am having a HELL of a time with what should be really simple
graphics work.
I have a text file containing aligned text (scientific data),
that is, it is essentially ascii. I need to annotate this
text with various graphics and enclose some of the text in
colored or shaded boxes.
I have Killu
Yes, the interrupt setting in your ethernet driver and your card are
different, so the two are not quite talking to each other right.
For the LinkSys16 cards, there is a utility on a DOS diskette. Take
a bootable DOS floppy, boot the PC with that, and rund the utility.
(It is in a directory call
Hi
I have now running Mandrake which was a RedHat 6.0 till very recently
One rather expensive application which ran under RedHat 6 nmow gives this error
on startup
Tcl-Init failed
Any ideas where to start looking on this one
Thanks
Phil
--
Phil Risby, president
PR Yacht Solutions
division of FE
Evening. I'm considering a new machine which is to have a re-writable CD
and two USBs. I'd appreciate hearing comments on compatibility of these
devices. I'm inclined to believe the CD RW is okay but I'm unclear as to
USB support.
I'm running 6.1, kernel 2.2.12. Thank you.
John
--
To
Well, I 've successfully installed StarOffice 5.1 on some RH6.1 and
RH6.0
systems (three total with the same symptoms) while logged into the root
account. For this account StarOffice starts and executes from the
command line just fine. When I return to
the super user and start StarOffice from co
http://njtcom.com/dansie/zip-drive.html
hth.,
Arni
- Original Message -
From: John Vincent M. Catral <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 19, 1999 9:14 PM
Subject: zip drives
>
> Hi! does anyone have information on installing and getting my Parallel
> zi
[EMAIL PROTECTED] wrote:
>
> Hi!
>
> I'm using RH 6.0. My ISP is 'AT&T Businsess Internet Services' (used to be
> IBM Global Network). Has anyone on this list managed a successful ppp
> connection to this service? And if so, how did/do you do it? I've tried
> mvdial, ppp0 (with linuxconf), a
http://njtcom.com/dansie/zip-drive.html
hth.,
Arni
- Original Message -
From: John Vincent M. Catral <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 19, 1999 9:14 PM
Subject: zip drives
>
> Hi! does anyone have information on installing and getting my Parallel
> zi
http://njtcom.com/dansie/zip-drive.html
hth.,
Arni
- Original Message -
From: John Vincent M. Catral <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 19, 1999 9:14 PM
Subject: zip drives
>
> Hi! does anyone have information on installing and getting my Parallel
> zi
Hi! does anyone have information on installing and getting my Parallel
zip drive to work?
Thanks!
John
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello all,
One of the points for updating my kernel was to add IP Aliasing support.
Looking at the mini-HOWTO, I go through the following steps:
(I skipped insmod /lib/modules/`uname -r`/ipv4/ip_alias.o, because I compiled
my kernel with IP aliasing
>Hi
>
>I have a log file, with entries that look like this:
>Fri Nov 19 11:09:04 1999 DNS 192.168.1.3:1519--->111.222.333.444:53
>www.omnicast.net
>
>(all on one line)
>
>I want to pull out the second IP address 111.222.333.444, do an nslookup
>on it to get the host/domain, and output everything t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello all,
First, thanks to all that responded with help for compiling the kernel. With
this help, I was able to successfully compile and install a working kernel.
Here are my notes I collected on the process, from FAQs, the README, and your
comment
On Fri, Nov 19, 1999 at 10:56:10AM -0500, jack wallen, jr. wrote:
> where is a good place to get the latest kernel rpms?
rawhide generally has fairly current kernels available. Now it is
2.2.12-42. Mandrake seems to have more recent ones, but I cannot vouch
for theirs.
HTH
--
Hal B
[EMAIL PROT
Eric Sisler wrote:
> It seems to, but which netmask should be used? I'm assuming 255.255.255.0
> since it's been subnetted into class C's.
Yes. That's the one.
> Maybe they can run DHCP for
> their entire network on 1 server with 1 IP address since there's no
> physical separation anyhow.
The
Well, I 've successfully installed StarOffice 5.1 on some RH6.1 and
RH6.0
systems (three total with the same symptoms) while logged into the root
account. For this account StarOffice starts and executes from the
command line just fine. When I return to
the super user and start StarOffice from co
Hi
I have a log file, with entries that look like this:
Fri Nov 19 11:09:04 1999 DNS 192.168.1.3:1519--->111.222.333.444:53
www.omnicast.net
(all on one line)
I want to pull out the second IP address 111.222.333.444, do an nslookup
on it to get the host/domain, and output everything tino a file
On Fri, 19 Nov 1999, J. Scott Kasten wrote:
> You're right. The entry for eth0 does not look correct. Two things you
> need to do before anyone can help you.
>
> #1 Post the output of this command:
>
> /sbin/route
>
Here it is:
Kernel IP routing table
Destination Gateway Genmask
I received about a dozen or so replies, so I gues it does work I'm
surprised it's so quiet on here, the last time I was on this list, there
were 150-200 messages a day, I wonder what happened ?
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
On Fri, 19 Nov 1999, Chris Fishwick wrote:
> Paul,
>
> How are the PC's connected?? Do you have a Hub?? If not, I assume
> you are aware that you will have to use a cross-over cable to connect the
> 2 PC's..
>
Funny you should ask. I do have them connected by a crossover cable, and
all was
Hi,
I had a wonderfully working system using kwvdialer, I could dial out
etc..eeryrting was smooth...But I had to reboot doe to some firewall config
probs...But when I try to dial out now...I get teh following mesg..::
Cant coonnect /dev/ttyS0 device or resource busy
why is this...Here is th
On Nov 19, Andreas Kostyrka wrote:
> Well, is it called /dev/hdd or /dev/hdc?
/dev/hdc, and /dem/modem is a symlink to hdc...
--
No, my friend, the way to have good and safe government, is not to trust it
all to one, but to divide it among the many, distributing to every one exactly
the functi
I'm using gdm on a redhat 6.1 system. I am running WindowMaker as my wm.
My question is .. with gdm and WM how do I get xscreensaver to kick in
after ten minutes instead of just the screen blanking out
Thanks in Advance
Terry
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as th
Hello,
Can anyone enlighten me as to how one goes about adding fonts to
staroffice? I have a real NEED for monospaced fonts and none
or the hanful of fonts available with staroffice5.1 are monospaced.
patrick
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
At 03:27 PM 11/19/99 -0500, Ward William E PHDN wrote:
>doing it in Perl. Problem is, I've forgotten how to set the .forward to
>pipe my incoming email message to the program. For testing, I'd actually
I don't know syntax to do this in a .forward. You should be able to use
procmail or use an
" Is there a software that can do CD-TEXT?
" --Sadiq
cdrdao (http://www.ping.de/sites/daneb/cdrdao.html) says it can do
CD-TEXT. RPMs are available at the usual places like freshmeat.net.
Romain Kang Siemens Info/Comm Products, San Jose R&D
[EMAIL PROTECTED] formerly Pyramid Techno
if you can modify the alias in sendmail for this email address, this
should get you started.
#!/usr/bin/perl
# mailbot.pl
$debug =1;
#invoked from /etc/aliases like this
#mailbot:[EMAIL PROTECTED], "|/home/cgalpin/bin/mailbot.pl"
open (LOG, ">/tmp/mailbot.log" ) if $debug;
print LOG "Got M
Ok, I give up, unless no one here knows how to do it (and I know there are
probably 100 or more that know how...)
I need someone to jog me elbow (yes, I used to know how to do this a few
years back, but have forgotten... of course, I've never done it in Linux at
all, just Unix).
Here's the probl
Hi,
I want to use Netscape(on linux) to read chinese(big5). But only
chinese(GB2312) has been installed by default. How can I install
big5 to netscape browser?
Many thanks!
__
Get Your Private, Free Email at http://www.hotmail.com
--
To un
On Fri, Nov 19, 1999 at 03:11:36PM -0500, Michael George wrote:
> > Is it set up as secondary master, not primary slave?
>
> Alone on the secondary controller. I can't remember if it's jumpered as a
> master or if there are no jumpers on it (or *is* that how you jumper it as the
> master?).
Well
On Nov 19, Hugo wrote:
> If the BIOS detects the CD-ROM drive & you can definitely mount data CDs
> under Linux (and under DOS? ... have you tried booting from a Win98 boot
> disk & access a data CD that way?) then it does sound like a software
> problem.
Yeah, that's what I'm thinking. Esp. sin
On Nov 19, Rob Saul wrote:
>
> I've seen similar behavior on my system, which is 100% SCSI. Put a
> audio
> CD in, magicdev recognizes it and starts CD player (gtcd) , which reads
> the CD,
> and displays the artist and title. When I click play an "error" flashes
> briefly on
> the player an
You're right, it's way OT...
but hey,
congrats to both of you...
best wishes from all the way in Guyana South America
Ahbaid.
Jeff Graves wrote:
> Well, you can kiss the rest of your life goodbyej/k
>
> -Original Message-
> From: Edward Dekkers [SMTP:[EMAIL PROTECTED]]
> Sent:
Wow, that's a bit of a shopping list.
When you say that "X errors out", how specifically does it error out? ONE
way to get this information is to redirect stderr when you start X:
$ startx >& Xerrs.out
Then read that and see what it says.
As far as the mouse goes, if it's a serial mous
Hi, greetings.
May I ask if it is possible to use Compuserve or AOL as ISP under Linux?
I mean registering with their service but not use their
windows program. Instead connecting to their access phone number
through ppp.
thanks a lot
xun
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubsc
Is there any software available to use an Eicon Diva Picolla internal ISA
ISDN card under Linux???
Phil Merricks
Level Designer, Quake 2 PSX
Systems Administrator, Webmaster
Hammerhead Ltd
www.hammerhead.ltd.uk
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
Michael George wrote:
>
> Has anyone else had problems playing audio CD's in Red Hat 6.1? I've tried
> several pieces of CD playing software (GUI and text-based), and they all
> behave the same.
I've seen similar behavior on my system, which is 100% SCSI. Put a
audio
CD in, magicdev recognize
Ok, that did work. Now the tweeking I think I need help with. Windows said
that my video is SiS 5597/5598 and linux probe said it is a SiS 5598. And
the monitor is Gateway Vivitron 15. But when it tries to install the x
interface, it errors out and then not work. I have a Intel Pentium MMX 200
Ok. I've put the AOL AIM on my web site for easy downloading. At the
bottom under misc. I put a link out there.
http://www.xmission.com/~dmacleod/unix/linux/contents.html
I think you need the latest tcl/tk for this to work properly (version
8+).
Also, feel free to browse the rest of the web
Hi all!
When I boot my computer I see the following message:
/dev/hda6 was not cleanly unmounted, check forced (frezees for almost a
minute and then continue)
...
What it mean?
Thank you very much.
Luis Pablo Gasparotto
__
Do You Yahoo!?
Bid
Hi all!
I´ve recently compiled the 2.2.12 Kernel with Loadable Module Support
and the following modules:
soundcore
msnd
msnd_pinnacle
to use my Fiji under Linux.
I can install soundcore and msnd modules with no problem. But when I try
to install
the msnd_pinnacle module this happens
> On Fri, 19 Nov 1999, Martin Reiser wrote:
>
> > Emergency solution is on client side (Only in Windows 98 and NT,
> > it does not work with WIndows 95) is HTML format and Base-64
> > Encoding.
>
> Suggestions:
>
> 1. update your W'95 clients to the current Outlook so they'll handle
> base64
If the BIOS detects the CD-ROM drive & you can definitely mount data CDs
under Linux (and under DOS? ... have you tried booting from a Win98 boot
disk & access a data CD that way?) then it does sound like a software
problem. However, I've come across a few (old & broken) CD-ROM drives which
handle
On Fri, 19 Nov 1999, Martin Reiser wrote:
> Emergency solution is on client side (Only in Windows 98 and NT,
> it does not work with WIndows 95) is HTML format and Base-64
> Encoding.
Suggestions:
1. update your W'95 clients to the current Outlook so they'll handle
base64 encoding, and
2. gent
Has anyone else had problems playing audio CD's in Red Hat 6.1? I've tried
several pieces of CD playing software (GUI and text-based), and they all
behave the same.
When they start up and try to access the drive, the drive lights flick on for
a second and then go off. The software reports that
I have ppp link.so the dns server cannot be contacted..!!
I blanked out all the lines in the /etc/resolv.cof and then rebooted..no
luck...any ideas.??
Thx.,
Arni
- Original Message -
From: Yoink! <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, November 19, 1999 11:26 AM
Subje
Outlook uses its own MIME format designated ms-tnef. It is a registered but not
standard encoding
method. It only gets used if the outlook client sends anything other than plain text.
This could be the problem.
Good luck
Bruce
> My problem is sending attachments in e-mails from M$ Outlook
> For some reasons I would like to work with lynx. What should I set to
> let lynx bring a https page? Any help is really appreciated.
Hi,
You need to get hold of a version of lynx that supports https. Check
out http://www.slcc.edu/lynx/release2-8-2/ssl.html for information
about lynx and SSL.
On Fri, 19 Nov 1999, Arni Raghu wrote:
> For some reason(screwing up the firewall settings) I rebooted my machine and
> as it rebooted it stoppped when it tried to start the xfs service...I hit a
> Ctrl-D and it continued...I did a startx and it gave the error::
>
> ..nothing would budge it...I l
On Fri, 19 Nov 1999, Maziar Mahzari wrote:
> I've a shell and ppp account on my linux ISP. When I login using minicom
> and try to brows a https site with lynx it says that the server can not
> connect to this page. But using ppp and netscape on the same server I can
> see the page. The problem ex
[EMAIL PROTECTED] said:
> try
> cc -I/usr/include/kudzu -L/usr/lib -lkudzu -o hw_exam hw_exam.c
> /usr/lib must not be in your LD_LIBRARY_PATH
Nope. Finally found it. Stupid error, as I thought -
cc -I/usr/include/kudzu -L/usr/lib -o hw_exam hw_exam.c -lkudzu
Damned library refs go at end
hi,
I hope this is the right list for this question..::
For some reason(screwing up the firewall settings) I rebooted my machine and
as it rebooted it stoppped when it tried to start the xfs service...I hit a
Ctrl-D and it continued...I did a startx and it gave the error::
..nothing would budge
> where is a good place to get the latest kernel rpms?
Trying to be helpful, I might give the wrong answer, but what about somewhere
under:
- ftp.kernel.org:/pub/mirrors/redhat/redhat/redhat-6.1
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
AOL *USED* to have one but stopped supporting it (those turkies). I'm
running it still and it still works. I believe it's tcl/tk based. They
did a nice job on the GUI. I have it somewhere (the tarball). If your
interested I can put it on my web site for download.
I'm REALLY surprised these t
Dear friends;
I've a shell and ppp account on my linux ISP. When I login using minicom
and try to brows a https site with lynx it says that the server can not
connect to this page. But using ppp and netscape on the same server I can
see the page. The problem exists when I use a ppp simulator for m
Hey
try
cc -I/usr/include/kudzu -L/usr/lib -lkudzu -o hw_exam hw_exam.c
/usr/lib must not be in your LD_LIBRARY_PATH
hth
charles
On Fri, 19 Nov 1999, Rick Forrester wrote:
>
> I'm sure I'm doing something really dumb here (which someone will,
> hopefully, point out immediately) but I can't
where is a good place to get the latest kernel rpms?
Jack Wallen, Jr.
Editor in Chief of Linux Content
www.techrepublic.com
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
I'm sure I'm doing something really dumb here (which someone will,
hopefully, point out immediately) but I can't get a test compile
to work.
The code references the kudzu header & library,
/usr/include/kudzu/kudzu.h
/usr/lib/libkudzu.a
and I'm using the command line:
cc -I/usr/include/kudzu -
Gordon Messmer <[EMAIL PROTECTED]> wrote:
>> Maybe I should say "sort of" solved in that it works but I don't understand
>> why.
>Because DHCP requests and ack's are broadcast. The IP's don't make any
>difference.
>> The problem wasn't dhcpd or the dhcpd.conf file. We took another
>> look a
Um, Kurt? That's not exactly a great deal. Now, if it had an AMD-K6-2 450,
a 17" monitor, and a 4x4x24 CDRW, it might be a bit better of a buy.
However
CPU -> ~$45-50
Network Adapter -> $10-$25 (with rebates to 10, without at 20-25)
1.44 Floppy -> $19
ATX Case -> $45-$65 (depending on confi
On Fri, 19 Nov 1999, Charles Galpin wrote:
> > example: System.map-2.2.13
>
> I have this too, as well as System.map symlinked to oen of the versioned
> ones. When I booted with this link pointing to an older version it gave me
> errors (sorry don't remeber them), but they went away when I moved
um...
anyone have a good amanda backup howto?
i really need to set up a backup system at home, but i never have the time
to dedicate to getting it done. amanda looks perfect for what i want to
do, but i really don't want to have to learn everything about it right
now...
if any kind soul real
Hi People,
I joint this list today, so I am unsure whether I am asking for the wrong
thing here.
(Tell me if I do something really offensive here)
Did any of you manage to play a DVD under Linux?
My configuration is the following:
- Abit BP6 motherboard
- Dual Celeron 400 (Overclocked to 500)
-
On 19-Nov-99 at 14:49:15 Larry Mintz wrote:
>> I've just rebuilt my PC from RH5.2 to 6.1 - a 'custom' installation; no
>> problems. I installed the pdksh rpm since I prefer to use the Korn shell
>> (used it a lot on the Sun's, so I still use it under linux). However, the
>> .profile file in my hom
You're right. The entry for eth0 does not look correct. Two things you
need to do before anyone can help you.
#1 Post the output of this command:
/sbin/route
#2 Capture the output of "dmesg" into a file and chop out anything that does
not appear to be related to networking. In particular, it
On 19-Nov-99 John Horne wrote:
> Hi,
>
> I've just rebuilt my PC from RH5.2 to 6.1 - a 'custom' installation; no
> problems. I installed the pdksh rpm since I prefer to use the Korn shell
> (used it a lot on the Sun's, so I still use it under linux). However, the
> .profile file in my home direc
On Fri, 19 Nov 1999, Martin A. Marques wrote:
> On Fri, 19 Nov 1999, Charles Galpin wrote:
> > 2.2.13 and patched it successfully, and built it. Oh, I was using the
> > excellent buildkernel script, and with the exception of having to manually
> > update the System.map link (can someone tell me
On Thu, 18 Nov 1999, Ed Lazor wrote:
> Here are some options that I have (I'm not limited to these options):
>
> Yamaha SCSI CDRW Drive
> Yamaha CRW 6416S SCSI CD-RW Drive w/software 6X 4X 16X OEM $210.00
i have one of these, and it's worked great in every os i've used it in.
i've been told th
On Fri, 19 Nov 1999, Michael H. Warfield wrote:
> and he should try 2.2.13 as well (2.2.5 sucks anyways).
Truelly right!!! It sucks alot
"La gente que usa VB, solo Ve lo Basico"
-
Martín Marqués email: [EMAI
Yep, it's called 'everybuddy' and version 0.0.5 was released yesterday on
Freshmeat.
- Original Message -
From: Charles Galpin <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday, November 18, 1999 7:31 PM
Subject: Re: AOL
> I use gaim (gnome app). works great. Like someone else
On Fri, 19 Nov 1999, Charles Galpin wrote:
> The short version:
> 1. What are the differences between Red Hat's kernel-source rpm and a
> tarball of the same rev? They clearly apply some patches which are not in
> the tarball.
> 2. Are there any downsides to using the tarball and not applying wh
On Fri, Nov 19, 1999 at 10:59:10AM -0300, Martin A. Marques wrote:
> On Fri, 19 Nov 1999, Charles Galpin wrote:
> > Jesus
> > As others have said, the kernel version you are running should recognize
> > your ram without any lilo lines. I suggest trying two things.
> Wrong!!! Until kernel 2.2.12
On Fri, 19 Nov 1999, Charles Galpin wrote:
> Jesus
>
> As others have said, the kernel version you are running should recognize
> your ram without any lilo lines. I suggest trying two things.
Wrong!!! Until kernel 2.2.12 I had no support for my SiS Moderboard with
a SiS video card which uses me
Hello
Someone know how configure a vga card "INTEL 3D Graphics 4 MB Chipset
I810E"?
I can't found the correct seting...
thank
´¯`·.¸¸.·´Esteban·´¯`·.¸¸.·´
[EMAIL PROTECTED]
Buteler & Peralta Ramos
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
Hello,
I had 4 partitions on my system (Win95,Swap,RH5.2,RH6.1)
1) I cannot mount the RH6.1 partition from RH5.2
(I got an error)
What should I read for mount it ?
2) I tried to reinstall the RH6.1 because I didn't install the
lilo(RH6.1).
But the installation is locking to the end (post
I had to send one Western Digital drive back about 7 times. I sent my
other one back 4 times. I will never buy another. You get sick of calling in
warranties...
I use Seagate, IBM, and Maxtor.
On Fri, 19 Nov 1999, Charles Galpin wrote:
> I've had the same success with WD. Admittely I've had lit
On 19-Nov-99 at 13:13:14 Allen Bolderoff wrote:
> did you try chsh?
> and telling the system you want to use pdksh?
>
Yup and yup. Still doesn't work.
John.
>>
>> I've just rebuilt my PC from RH5.2 to 6.1 - a 'custom' installation; no
>> problems. I installed the pdksh rpm since I prefer to use
did you try chsh?
and telling the system you want to use pdksh?
> Hi,
>
> I've just rebuilt my PC from RH5.2 to 6.1 - a 'custom' installation; no
> problems. I installed the pdksh rpm since I prefer to use the Korn shell
> (used it a lot on the Sun's, so I still use it under linux). However, t
Hi All
The short version:
1. What are the differences between Red Hat's kernel-source rpm and a
tarball of the same rev? They clearly apply some patches which are not in
the tarball.
2. Are there any downsides to using the tarball and not applying whatever
patches RH has added?
The long version
Hi,
I realy don't know if I know the solution.
I think you have to set the symbolic link /bin/sh to the ksh instead of
bash.
Sorry if it is not the solution.
Eugen
John Horne wrote:
>
> Hi,
>
> I've just rebuilt my PC from RH5.2 to 6.1 - a 'custom' installation; no
> problems. I installed the p
hi.
i am having problems with my ppp connection dying for no
apparent reason.
connection is between two redhat6.0 boxes. one has an old motorola
28.8K externel modem and the other has a 56K supraexpress pro externel
modem.
if i login to the remote machine and work from there everything
is usua
Jesus
As others have said, the kernel version you are running should recognize
your ram without any lilo lines. I suggest trying two things.
1. Check your bios options. Although this problem doesn't sound like the
exact same thing, others have reported problems with bios memory hole
settings.
2
1 - 100 of 113 matches
Mail list logo
