Package: ncurses
Version: 5.5-5
Tags: patch
the symlink is dangling, and pointing to the 64bit version of the
library. /lib32 can be directly used: /lib32 -> /emul/ia32-linux/lib
diff -u ncurses-5.5/debian/rules ncurses-5.5/debian/rules
--- ncurses-5.5/debian/rules
+++ ncurses-5.5/debian/rules
@@
Hi,
> "Thanh" == Thanh Han The <[EMAIL PROTECTED]> writes:
> this is a feature/limitation/bug/ of pdftex:
> it doesn't remove unused Subs entries (this is very tricky and
> dangerous), but replaces them by a dummy one.
let me give a few additional explanations. Glyph descriptions ar
tags 424698 l10n patch
thanks
Quoting Ossama Khayat ([EMAIL PROTECTED]):
> Package: freepops
> Version: 0.2.2-2+b1
> Severity: wishlist
>
> Arabic Translation
For your next reports, Ossama, please think about adding the usual
tags in such case:
Tags: l10n patch
That makes all l10n bug report
Package: amsn
Version: 0.96+dfsg1-2
Severity: serious
amsn failed to autobuild on mips [1] and mipsel [2] with the same
error: ld Segfaulting when linking
utils/TkCximage/src/TkCximage.cpp.so:
Automatic build of amsn_0.96+dfsg1-2 on mayr by sbuild/mips 99.99
[...]
AR utils/TkCximage/src/C
On Wed, May 16, 2007 at 12:41:18PM -0500, Rolf Brudeseth wrote:
>
> I tested the script with the console attached to serial port 1 and 2 (hvsi0
> and hvsi1).
>
> I had to make some minor changes to the script to get it to work.
>
> I don't know, but you may want to implement the changes differen
Subject: rhythmbox: Cannot play any internet radio
Package: rhythmbox
Version: 0.10.0-3
Severity: important
I cannot play any internet radio, and the error is:
"A HTTP protocol source plugin is required to play this stream, but not
installed."
Anyway, here are the logs obtained by starting "r
block 423869 by 405151
tags 405151 +pending
quit
On Mon, May 14, 2007 at 06:13:04PM +0200, Olaf Zaplinski wrote:
> # /etc/init.d/qpsmtpd start
> Starting qpsmtpd: eval Can't locate Clamd.pm in @INC (@INC contains: lib
> /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8
> /usr/lib/p
Package: acpi-support
Typically in these kinds of cases you have to check for the existence
of some non-conffile (usually a /binary) || exit 0.
|Starting periodic command scheduler: crond.
|/etc/rc2.d/S99acpi-support: line 7: /usr/share/acpi-support/power-funcs: No
such file or directory
|Checki
On Mon, May 14, 2007 at 09:23:24PM +0200, Robert Millan wrote:
> On Mon, May 14, 2007 at 09:59:15AM +0100, Sam Morris wrote:
> > On Mon, 2007-05-14 at 10:54 +0200, Robert Millan wrote:
> > > On Sun, May 13, 2007 at 08:32:58PM +0100, Sam Morris wrote:
> > > > > Can you try arranging this code to inc
Package: freepops
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
Thanks for taking care of warning translators before uploading a new
version with string changes. It's highly
On 5/16/07, Christian Perrier <[EMAIL PROTECTED]> wrote:
The file was funnily corrupted, with extra cruft at the beginning and
the end of the PO file.
Removing these lines made gettext happy. See attached file.
To maintainer: please use "my" file and not the original one.
This is not a corrup
reassign 424704 python
thanks
Michael R Head writes:
> Package: python2.4
> Version: 2.4.4-4
> Severity: grave
> Justification: renders package unusable
>
> Running unstable here, and I cannot upgrade from 2.4.4-4 to 2.4.4-5:
>
> [EMAIL PROTECTED]:~$ sudo apt-get upgrade python
> Reading package
> What does this do to long-lived client connections that may be idle for
> minutes (or hours while the user is away from his desk) at a time?
Theyr're just reconnected. Most, if not all clients, now silently
reopen connections when they're closed.
>
> I would prefer to have a discussion with u
Quoting Caleb Epstein ([EMAIL PROTECTED]):
> I'm getting this same error.
Which version of samba? Do you run etch (ie samba 3.0.24-6etch1) or
unstable (so, 3.0.25-1)?
Could you try sending us a level 10 log of the error?
That would mean setting log level to 10.restart sambaempty the
log
tags 420896 +pending
thanks
Fixed in my CVS for the next upload.
Bdale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
flags 386712 +pending
thanks
Merged in my CVS for the next upload.
Bdale
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
forcemerge 267344 424734
thanks
* Oliver Chief O'Cordes ([EMAIL PROTECTED]) wrote:
> Package: iceweasel
> Version: 2.0.0.3-2
> Severity: normal
>
> iceweasel is ignoring -width and -height parameters which is reallsy
> uncool since I need this for a terminal to swith iceweasel in fullscreen
> mod
On 3/14/07, Loïc Minier <[EMAIL PROTECTED]> wrote:
On Wed, Mar 14, 2007, Theppitak Karoonboonyanan wrote:
> However, oddly enough, I added the patch back to debug it.
> The bug does not come back again!!
>
> So, I reverted to the official deb. It's completely gone!!
>
> Let me try to reproduce it
tags 416660 patch
thanks
Hi José Luis,
I've prepared a 0-day NMU to fix this RC bug, guarding the debconf call in
the postrm with a check for debconf's availability. The patch is attached,
the NMU will be uploaded to incoming shortly.
Thanks,
--
Steve Langasek Give me a lever
It's a 2.6 kernel problem.
http://ubuntuforums.org/showthread.php?t=414210
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: aptitude
Version: 0.4.4-4
Severity: normal
While attempting to install security update for kernel image, the
installation hangs when it is unable to detect a /boot/grub/menu.lst
file and asks y/N to generate a new file. I've tried both y & N with
the same result. This may be a grub p
Package: python-fuse
Version: 2.5-5+b2
Severity: wishlist
New upstream version (0.2pre1).
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.20-1-686 (SMP w/2 CPU cores)
Locale:
Package: xpdf
Version: 3.02-1
Severity: minor
Tags: patch
Hi,
The man page doc/xpdfrc.5 currently lists the wrong path to xpdfrc,
/usr/local/etc/xpdfrc where it should be /etc/xpdf/xpdfrc. I've attached
a patch that was added in Ubuntu to fix this bug, for your consideration.
Thanks very much
-
Package: lintian
Version: 1.23.28
Severity: wishlist
apt-cache dumpavail |grep -wice 'the *the'
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: mozilla
Severity: wishlist
and maybe forward upstream!?
http://www.cacert.org/index.php?id=3
Thanks
--Jan
-- System Information:
Debian Release: 4.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.20
On Wed, May 16, 2007 at 01:13:46PM +0200, Arnt Karlsen wrote:
> On Wed, 16 May 2007 13:16:49 +0900, Simon wrote in message
> <[EMAIL PROTECTED]>:
>
> > On Tue, May 15, 2007 at 04:44:08PM +0200, Arnt Karlsen wrote:
> > > Package: heartbeat
> > > Version: 1.2.5-4
> > > Severity: normal
> > >
> > >
I echo the comments about the inconsistent licence.
Also, I notice this from the ITP:
> Simple PHP Blog only requires PHP 4 [...]
while http://simplephpblog.com/static.php?page=static040502-230734 says:
> The main advantage of using Simple PHP Blog is that it only requires
> PHP 5 (or greater) [.
Package: gob
Version: 1.0.12-3
Severity: serious
Hi Mark,
Your changes in gob 1.0.12-3 cause the package to fail to build when using
-rsudo:
/usr/bin/sudo debian/rules clean
[...]
# Add here commands to clean up after the build process.
cp src/parse.[ch] src/lexer.c debian
[...]
mv debian/parse
Hi Brice,
On Wed, May 16, 2007 at 07:19:26PM +0200, Brice Goglin wrote:
> Joe Nahmias wrote:
> > I upgraded from 1:7.1.ds1-2 to 1:7.2.ds1-2 and now startx doesn't work
> > anymore. I get the error "X: user not authorized to run the X server,
> > aborting." By running xauth manually I don't have
Package: xserver-xorg-input-fpit
Version: 1:1.1.0-1
Severity: important
On this old TabletPC (Fujitsu Stylistic 2300), the pointing
device is a pen with
a button on the tip, and another button on the side.
This device is attached to a serial line : ttyS3.
(on a side note, the user needs to co
Package: nexuiz
Version: 2.2.3-1
Severity: grave
Tags: sid
Justification: renders package unusable
Hi folks,
The nexuiz package in unstable has a hard-coded dependency on libcurl3.
While this is fine for stable and testing (assuming it's needed of course),
in unstable the curl library has gone t
Package: filelight
Version: 0.99beta6-1
Severity: important
Tags: patch
I believe that version 1.0 resolves at least the following bugs:
#393827: filelight: very large files and directories lead to confusion
#354706: please remove old editor backup files from diff
#404460: always crashing on exit
Package: wnpp
Severity: wishlist
Owner: Sebastien Delafond <[EMAIL PROTECTED]>
* Package name: jruby
Version : 1.0.0rc2
Upstream Author : The JRuby Team
* URL : http://jruby.codehaus.org/
* License : tri license CPL/GPL/LGPL
Programming Lang: Ruby, Java
Desc
Package: rkhunter
Version: 1.2.9-4
Severity: normal
Hi,
The files in /var/lib/rkhunter/db/* need to be excluded from
dh_md5sums when the package is built. Now debsums gives mismatches and
reportbug reports that "There may be a problem with your installation
of rkhunter" because the files there ha
Package: ketm
Version: 0.0.6-19
Severity: normal
Hi,
The file /var/games/ketm.scores should be excluded from dh_md5sums
when building the package. Now debsums reports a mismatch and
reportbug says "There may be a problem with your installation of ketm"
because the file has changed.
Sami
On Wednesday 16 May 2007 15:07:20 Emilio Pozuelo Monfort wrote:
> Hello there!
>
> Felibe, is there any progress on this package? I'm really interested on it!
Yes, there are packages ready now. You can get the source packages from
mentors.debian.net
> I've seen that there's a candidate on mentor
The following message is a courtesy copy of an article
that has been posted to gmane.linux.debian.devel.legal as well.
Cord Beermann <[EMAIL PROTECTED]> writes:
> I want to add a package to Debian with the following
> License-Statement:
Does this mean you are the sole copyright holder? Or is thi
Package: libwww-perl
Version: 5.805-1
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
If netbase is not installed, libwww-perl fails to create sockets
because it cannot look up the protocol name 'tcp'. Theoretically this
could be found via NIS. Practically it will be looked up in
Package: bash
Version: 3.1dfsg-8
Severity: minor
File: /etc/bash_completion
Per http://bugs.debian.org/395119, bash should complete pdf.gz (and
pdf.bz2?) for evince.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Archit
Package: lacheck
Version: 1.26-9
Severity: normal
Currently lacheck Recommends: tetex-base.
But tetex is now replaced by texlive. Would you be able to update
lacheck's Recommends to the appropriate texlive package?
Thanks, Drew.
-- System Information:
Debian Release: lenny/sid
APT prefers un
Package: iceweasel
Version: 2.0.0.3-2
Severity: normal
iceweasel is ignoring -width and -height parameters which is reallsy
uncool since I need this for a terminal to swith iceweasel in fullscreen
mode without a window-manager. Please fix this...
-- System Information:
Debian Release: lenny/sid
Hi Steve,
On 16 May 2007 at 16:33, Steve Langasek wrote:
| Package: lme4
| Version: 0.99875-0-1
| Severity: important
|
| Hi Dirk,
|
| The lme4 package you've just uploaded is failing to build on many
| architectures because the versioned build-dependency on r-cran-matrix is
| wrong:
|
| [...]
Le Mon, May 14, 2007 at 12:56:38AM +0900, Junichi Uekawa a écrit :
> Hi,
>
> > I would like to use a pbuildd to rebuild the archive on my iMac G5 to
> > chechk to what extent a build bug I sometimes noticed is present in
> > the archives. However, when I use buildd.sh, it hangs "considering"
> > t
Package: gs-esp
Version: 8.15.3.dfsg.1-1
Severity: normal
$cat hangs.gpi
set terminal postscript eps enhanced color 30
set output 'hangs.eps'
set ylabel '@^{\^}c^{\ m}(t)/ @^{\^}c^{\ m}(0)'
plot x
$gnuplot hangs.gpi
This generates a hangs.eps . When the hangs.eps file is viewed with gv, the
syst
Package: splashy
Version: 0.3.3
Severity: normal
usplash is missing a conflicts with usplash. As a result you can install
both which will obviously lead to clashes.
Maybe it would make sense to add a virtual package "bootsplash-system"
(better name appreciated) and each splash package in Debian
(
[Achim Seufert]
> > # Make sure /var/lock/apache2 has the correct permissions
> > if [ -d /var/lock/apache2 ]; then
> > chown www-data /var/lock/apache2
> > fi
>
> So this indicates that the ownership of /var/lock/apache2 really should
> be assigned to www-data.
> I really don't know why
tags 417040 + patch
thanks
Hi,
Attached is the diff for my pidentd 3.0.19.ds1-1.1 NMU during the
current BSP which I uploaded to delayed-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u pidentd-3.
John Hasler wrote:
> Luk writes:
>> Though it might get rejected as the version is higher than the version in
>> testing...
>
> I uploaded to both proposed-updates and to Unstable. If the version is a
> problem the admins can push it through into Testing before installing it in
> Stable.
They wo
Package: libusplash-dev
Version: 0.4-43-3
Severity: important
The actual library resides in /lib, the *.so symlink though in the -dev
package is in /usr/lib.
This seems to confuse dpkg-shlibdeps:
dpkg-shlibdeps: warning: unable to find dependency information for
shared library libusplash (soname
Hi Marko,
I haven't heard anything back from you about this bug. Are you still
seeing it? If so, can I get the backtrace from klog if possible? I think
this problem is SPARC-specific and don't have the hardware to duplicate
it, but I can at least forward it to the openafs-devel mailing list.
T
This problem was due to a recent erroneous upstream change to the s390
Linux port that made copy_to_user a GPL-only symbol. A patch has been
submitted to correct this:
http://lkml.org/lkml/2007/5/4/327
I'm going to make the assumption that this patch will make its way into
the upstream kerne
Luk writes:
> Though it might get rejected as the version is higher than the version in
> testing...
I uploaded to both proposed-updates and to Unstable. If the version is a
problem the admins can push it through into Testing before installing it in
Stable.
--
John Hasler
[EMAIL PROTECTED]
Elmw
tags 417038 + patch
thanks
Hi,
Attached is the diff for my oidentd 2.0.8-1.1 NMU during the current BSP
which I uploaded to delayed-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u oidentd-2.0.8/d
Package: libpng
Severity: serious
Tags: patch security
CVE-2007-2445
http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2007-2445
CERT Vulnerability Note VU#684664
http://www.kb.cert.org/vuls/id/684664
It seems that a grayscale image with a malformed (bad CRC) tRNS
chunk will crash libpng and moz
tags 417035 + patch
thanks
Hi,
Attached is the diff for my nullidentd 1.0-3.1 NMU during the current
BSP which I uploaded to delayed-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u nullidentd-1.0
Package: debian-history
Version: 2.8
Severity: minor
Saw these warnings during upgrade, not sure if they are relevant:
Preparing to replace debian-history 2.7 (using .../debian-history_2.8_all.deb)
...
Ignoring nonregistered document debian-history.fr
Ignoring nonregistered document debian-histo
reopen 423450
thanks
Hi Adam,
Sorry, this bug is not completely resolved. I should have been explicit
when I filed the bug report -- audacious-plugins did not just have the
versioned build-dep on libcurl3-gnutls-dev, the audacious-plugins-dev package
also has a versioned dependency on libcurl3-g
Package: microcode.ctl
Version: 1.16-1
Severity: wishlist
Hi Giacomo!
There is a new version of the microcode, from April 23, available at
http://www.urbanmyth.org/microcode/.
Thanks!
Best regards,
Nelson
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (5
tags 417034 + patch
thanks
Hi,
Attached is the diff for my midentd 2.3.1-3.1 NMU during the current BSP
which I uploaded to delayed-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u midentd-2.3.1/d
Package: wnpp
Severity: wishlist
Owner: Bernd Zeimetz <[EMAIL PROTECTED]>
* Package name: wmi
Version : 20070516
Upstream Author : Zenoss / Andrzej Hajda / The Samba Team
* URL : http://dev.zenoss.org/svn/trunk/wmi/
* License : GPL/LGPL and others
Progr
Hi
As noted on IRC, I changed the config a bit: changed driver from vesa to via
for instance. Anyway attached the working config and log...
Cheers
Luk
X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Linux Debian
Cu
John Hasler wrote:
> In the archive stable-proposed-updates and proposed-updates are links to
> etch-proposed updates. Yesterday, not having heard back from the admins, I
> tried another experiment and uploaded 2.3.17 to proposed-updates. It
> hasn't bounced so I apparently guessed right this tim
tags 417017 + patch
thanks
Hi,
Attached is the diff for my micro-httpd 20051212-5.1 NMU during the
current BSP which I uploaded to delayed-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u micro-ht
Hi there again,
some additional information regarding the problem with the DAV-lockfile.
My previous solution (changing the ownership of the lockfile) only
lasted for a short time. :-)
I realized that Apache2 (or the DAV-Module?!) removes its lockfiles upon
shutdown. So the altered lockfile also
Package: iceweasel
Version: 2.0.0.3-1
While iceweasel properly handles OpenType glyph ligature substitutions
in left-, right- and center-justified text (something which the official
Firefox doesn't even try to do under Windows), it does not advance the
ligature glyphs properly under fully just
Package: lme4
Version: 0.99875-0-1
Severity: important
Hi Dirk,
The lme4 package you've just uploaded is failing to build on many
architectures because the versioned build-dependency on r-cran-matrix is
wrong:
[...]
** preparing package for lazy loading
Error: package 'Matrix' 0.99875-0 was foun
On Sat, 28 Apr 2007 12:05:34 +0200, Jan Wagemakers writes:
>Alexander Zangerl schreef:
>
>> + // 635: has 2 calibration words in 2008 and 2009, no osccal
>> + {"pic12f635", 1024, 0, 0x3000, 1, 14, 0, 0, flash4, 128, eeprom, 0x0fa0}
>,
>> +
>> +
>>// 18f original series
>>// Multi-panel w
In the archive stable-proposed-updates and proposed-updates are links to
etch-proposed updates. Yesterday, not having heard back from the admins, I
tried another experiment and uploaded 2.3.17 to proposed-updates. It
hasn't bounced so I apparently guessed right this time.
--
John Hasler
[EMAIL
Package: gjots2
Version: 2.3.4-2
Severity: minor
Sorry, pet peeve here.
Package description indicates that that the user will be able to produce
mindmaps.
In fact, the outlines produced are antithetical to the concept of a mindmap
which are
radial rather than linear. If you have to read it f
On Wed, May 16, 2007 at 07:49:24AM +0200, Christian Perrier wrote:
> Quoting Daniel F. Smith ([EMAIL PROTECTED]):
> > Package: samba
> > Version: 3.0.24-6
> > Severity: minor
> > Running "netstat -tap" in my environment showed many connections being
> > fielded by smbd, some probably many weeks ol
Samuele Giovanni Tonon wrote:
> Luk Claes wrote:
>> Package: apcupsd
>> Version: 3.14.0-2
>> Severity: normal
>> Tags: patch
>>
>> Hi,
>>
>> Attached is the diff for my apcupsd 3.14.0-2.1 NMU which is uploaded to
>> DELAYED-0.
>>
>
> http://www.debian.org/doc/developers-reference/ch-pkgs.en.html#s
tags 417020 + patch
thanks
Hi,
Attached is the diff for my mailping 0.0.4-0.2 NMU during this BSP
which is uploaded to DELAYED-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -Nru /tmp/ENkA2NRvup/ma
Package: nscd
Version: 2.3.6.ds1-13
Severity: grave
Justification: renders package unusable
Well, I believe this is somehow important, on all of my servers it
crashes in about 15 seconds. Please note that I am using a lot of groups
(more than 2000) and that my servers are heavily loaded. I am us
Luk Claes wrote:
Package: apcupsd
Version: 3.14.0-2
Severity: normal
Tags: patch
Hi,
Attached is the diff for my apcupsd 3.14.0-2.1 NMU which is uploaded to
DELAYED-0.
http://www.debian.org/doc/developers-reference/ch-pkgs.en.html#s-nmu-guidelines
thanks for the emails
--
While various net
Package: traffic-vis
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Package: rancid
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ign
Package: splint
Version: 3.1.1-6
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANS
Package: labrea
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ign
Package: divxcomp
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (i
Package: stegdetect
Version: 0.6-4
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=A
Package: outguess
Version: 1:0.2-5
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=A
Package: medussa
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ig
Actually, -hyperspace makes the physics more consistent. Enemy ships
have always been able to go off the side of the screen and wrap back to
the other side. They have also been able to drop off the bottom of the
screen and reappear at the top. Hyperspace just extends this to the
player's ship, whic
Package: pbuilder
Version: 0.161
Severity: wishlist
One of the nice features of debuild is that it automatically creates a
build log for every build named *.build (where the rest of the file name
follows the conventions for the changes file and other generated files).
pdebuild supports a --logfile
Package: fidelio
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ig
Yeah ! This must be upgraded.
Since version 0.11.x pmacct can acct as NetFlow and sFlow probe.
It's the only Free sFlow probe I know (except nProbe, but must be buy...).
pgp25NpwjfJgu.pgp
Description: PGP signature
Package: ample
Version: 0.5.7-2
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI
Package: bcrypt
Version: 1.1-3
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_
Package: apcupsd
Version: 3.14.0-2+b1
Severity: normal
-- System Information:
Debian Release: lenny/sid
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.20.3-dvb (PREEMPT)
Locale: LANG=C, LC_CTYPE=C (charma
Package: backuppc
Version: 3.0.0-2
Severity: normal
Tags: patch
Hi,
Attached is the diff for my backuppc 3.0.0-2.1 NMU which I uploaded to
DELAYED-0.
--
Luk Claes - http://people.debian.org/~luk - GPG key 1024D/9B7C328D
Fingerprint: D5AF 25FB 316B 53BB 08E7 F999 E544 DE07 9B7C 328D
diff -u
Package: aptitude
Version: 0.4.4-4
Severity: normal
Hi,
I seem to remember that previously when some packages were left in a
broken state in an upgrade those packages were shown as
broken/installable (or something) in the aptitude ui. Nowadays even
when the installation leaves packages broken, af
severity 424703 serious
tags 424703 patch
kthxbye
On Wed, May 16, 2007 at 23:03:06 +0100, Markus Schoder wrote:
> Package: python
> Version: 2.4.4-5
>
> Package fails to install:
>
> Setting up python (2.4.4-5) ...
> dpkg: error processing python (--configure):
> subprocess post-installation s
On Wednesday 16 May 2007 14:08:40 Loïc Minier wrote:
> Just a note that I uploaded libmms 0.3-4 with the necessary support.
Okay, great. I'll see about getting this applied upstream soon.
--
Wesley J. Landaker <[EMAIL PROTECTED]>
OpenPGP FP: 4135 2A3B 4726 ACC5 9094 0097 F0A9 8A4C 4CD6 E3D2
Package: aptitude
Version: 0.4.4-4
Severity: normal
Open the UI options dialog and press down key many times enough to get
the caret to the default grouping method field. Now pressing down
arrow more times won't update the caret position until it gets to the
OK button. The same happens when I move
Package: jed
Version: 0.99.18+dfsg.1-3
* Jörg Sommer <[EMAIL PROTECTED]> [2007-05-16 11:42]:
> why do you force a build against libslang2-dev 2.0.7? What's the problem
> with prior versions? I don't see, why we need this.
I probably had a reason for that when I did the change in SVN revision 65
Package: strace
Forwarded from Ubuntu's Malone bugtracker, at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=377200
--
Bug Description, written by bug submitter Andrew Bennetts:
Binary package hint: strace
The attached python script starts a thread, attaches strace -f to
itself, a
Hello Emerson,
On Tue, May 15, 2007 at 04:45:00AM +, Emerson Gomes wrote:
> Package: mirrors
> Severity: wishlist
Thanks Emerson for your mirror's submission.
There are a few details to fix before we can include your mirror in the
list.
> Site: mirrors.uol.com.br
http://mirrors.uol.com.br/
Here is some more information as I get same error. From this I'm not
sure exactly what package is to blame...
Preparing to replace python 2.4.4-4 (using .../python_2.4.4-5_all.deb) ...
Unpacking replacement python ...
Preparing to replace python-minimal 2.4.4-4 (using
.../python-minimal_2.4.4-5_a
I'm getting this same error.
At first I was getting password expiration errors (thats new!), but
resetting my password fixed those. Now I'm getting
NT_STATUS_OBJECT_PATH_NOT_FOUND errors.
As a result, I can't attach to any of my shares. Everything worked
fine until this upgrade.
See attached
Package: cupsys
Version: 1.2.11-2
Severity: normal
After upgrading to 1.2.11-2, strange problems started happening. On
two separate servers, printing to a Brother HL2040 has stopped
functioning. According to cups and all the log information I could
find, cups thinks the print jobs are working fi
1 - 100 of 467 matches
Mail list logo
