Michael,
The more I think I know, the more I realize that I need to learn... :-)
Thanks
Gustav
"Michael H. Warfield" wrote:
> On Sun, Feb 04, 2001 at 09:53:48PM +0100, Gustav Schaffter wrote:
> In Bind 8.x and Bind 9.x you restrict who can request a zone
> transfer with the "allow-tra
Hi.
I am using DHCP behind a Linksys router to obtain local IP addresses and
have discovered that even though I can assign a name to my RH6.2 Intel
machine somehow the system is not realizing its name. I confirmed this by
determining the IP address using 'pump -i eth0 --status' and then putting
t
This is true!! I will give it until tomorrow
morning to re-cache because that will be like the 5th day or so
TIA!
Anthony
- Original Message -
From:
Eddie
Strohmier
To: [EMAIL PROTECTED]
Sent: Tuesday, February 06, 2001 8:23
PM
Subject: RE: Force a DNS U
how would you set that up ( redirect for www )
from xinet?
i would really like to know how to.
Thanks
On Tue, 6 Feb 2001, Claudiu Balciza wrote:
> hi all,
>
> I managed to redirect the www traffic with xinetd from the internet gateway
> to the inner www server
> I cannot do the same for the
Bob, Mikkel:
I definitely second that one. To know that you helped and
the solution was the right one not only benefits the poster
and the individual or individuals who solved it but the list
in general if the poster would just post the solution that
worked for them. Not only could it help someon
just an update. i got the bins from xfree86.org(the ones for glibc2.1)
and all went great. had to do some editing on the XF86Config file after
the XFree86 -config, but it works none the less. my wheel works on my
mousemanplus but i am having some problems with xscreensaver.
thanks goes out to chu
Jim,
Try looking in /usr/src/linux/Documentation, the kernel documentation
directory. More specifically, the networking directory. Most cards have
documentation that shows how to change duplex settings. I don't know about
recompiling, its usually just a parameter passed when you load the modu
I'v tryed the beta version but XFree doen't seem to have libGL.so.1.2
so no DRI support
On Mon, Feb 05, 2001 at 12:19:53AM -0500, Statux wrote:
> It's in beta right now or there abouts. RedHat is pretty good about
> releasing one version in the spring, and another in the fall. I'd say
> maybe Ap
On Tue, 6 Feb 2001, Bob Hartung wrote:
> Hi all,
> A question on list etiquette:
>
> If I post a question and receive answer(s) should I answer all if they
> solve the problem or just the first assuming that answers may filter in
> for a day to two and the first answer may solve the dilemma. N
Hi all,
A question on list etiquette:
If I post a question and receive answer(s) should I answer all if they
solve the problem or just the first assuming that answers may filter in
for a day to two and the first answer may solve the dilemma. Not
answering would limit traffic on the list - but
Dear all,
I tried to use Sendmail's Anti-spam filters in
netconf as below:
1. Rejected senders : use email address and error
messages
2. 'Relay for' by IP
3. 'Relay for' by name
4. Relay to hosts
I tried on 1 and 2, but it doesn't work as what I
expected???
What I need is just t
I have a small problem with my newly loaded Redhat 7 box. First off I have
two CD-ROMS, a Yamaha CD burner (hdc) and an Asus 40x (hdd).
hdc: YAMAHA CRW8824E, ATAPI CDROM drive
hdd: ASUS CD-S500/A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST32
Hey, I've been using wget to mirror SuSE and Red hat updates. it works very well but
since we're on ISDN I can only run it when no one else is around. I read it's man page
and it doesn't look like it has any kind of throttling. I've been running it with the
-m switch.
Does anyone know of eithe
The ethernet card's driver can specify the speed and duplex. If you need to
set it manually, go and look at the source for your specific card's driver,
toggle the proper settings, and recompile. Then add it to your kernel's
module directory. Do a little insmod magic and then your set. My best advi
You want the Date::Manip package, DateCalc method.
hth
charles
On Tue, 6 Feb 2001, Kiran Kumar M wrote:
>
> Hi,
>
> How can I get the Date + some days (for example 6th of Feb 2001 + 10
> should give 16th of Feb 2001...). How can I achieve this. I installed
> Date::calc perl module... on Redha
You
don't know unless you ask. Many a time I have had the same request in my ISP
days and I did not mind re-caching a zone so it could be seen more quickly
for a paying customer. Depends on what mood you catch them in and if it is after
hours or not. Most likely there is only one person assi
I have been using webmin for a while and think it is just marvelous. It
even lets someone as network impaired as me (sad old Oracle DBA) do
semi-useful stuff with DNS and a firewall and not be too frightened.
(of course now that I have said that my machines will be overwhelmed by
worms and scr
> "ac" == Anthony Capone <[EMAIL PROTECTED]> writes:
ac> Hey Guys,
ac> Quick question, if there anyway that I can force a Name Server to get an updated
zone?? If so, How?? Or do I have to wait until it updates on its own?
If you are using forwarders in your DNS and that is what you asking,
No...I am not in control of the name server and it
is an @ Home name serverso I don't think the admin would want to put down
his coffee
I thought there might be a way for me to do
it...but if not I will just have to wait!!!
THANKS,
Anthony
- Original Message -
From
Are
you referring to a name server that you have control over? If so and the zone is
loaded just do a /etc/rc.d/init.d/named restart or reload. If you are not in
control over it then you could possibly get the admin of the server to re-cache
the zone so it shows up on an nslookup.
Eddie
>
> My kernel won't compile using the command:
>
> make dep clean bzImage modules modules_install
>
Is this the kernel source from the rpm provides with rh7?
As it is the right version I'll assume that it is.
Also the error output has smp mentionned in it.
I needed to run
make mrprope
fred pasteck <[EMAIL PROTECTED]> writes:
> Hi. I've got one of those nifty three-button wheel
> mice but can't figure out how to get the wheel to
> work.
With which applications? Many applications now have built-in
support... and you can find more info here on those who haven't:
http://www-sop.
Hi. I've got one of those nifty three-button wheel
mice but can't figure out how to get the wheel to
work.
I'm using RH7 with X11 4.0.2. Previously I used
imwheel, but it's no longer included with RH7.
Also, I've downloaded the freefont package because my
fonts look horrible, but also can't figu
Hey Guys,
Quick question, if there anyway that I can force a
Name Server to get an updated zone?? If so, How?? Or do I have to wait until it
updates on its own?
Thanks,
Anthony Capone
Hi,
Is there a way that you can set the ethernet card to 100 full duplex? I
have looked at ifconfig but am not sure if or how this can be done. Thanks
for any help you can give me.
Jim Boyer
Systems & Programming Professional
College of Agriculture and Hom
Run Xconfigurator or xf86config and select the resolution(s) and color
depths you want, but don't select any 8bpp modes if you don't wish to ever
use them. You might have to hand edit your /etc/X11/XF86Config file a
little bit if you've selected multiple resolutions and/or color depths
and X is us
Hi
I've just successfully installed Red Hat v6.2 on (quite old) Fujitsu
Lifebook 780Tx. Everything is fine except IrDA. My Siemens S25 works
fine under Windows 98 on this machine. Under linux I tried different
combinations of BIOS configuration and irda-utils config files with no
success. Anybody
Hi,
I installed redhat 7.00, but can't get eth0. I have 3com pci 900B tpo
ethernet card. I tried specifying 3c59x in linuxconf, but the computer
crashes. Any suggestions?
Raja
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.co
On Tue, 6 Feb 2001, Gary Stiehr wrote:
> I am wondering how to obtain the /boot/module-info file
> that is installed by the RedHat kernel rpms. What is it
> used for and how is it generated?
>
> Also, what is the /boot/vmlinux-2.2.16-22 file in the
> /boot directory. Is this an uncompresses ker
When I try to do a shutdown -h now command, it will do a reboot instead of a
halt. Inittab is set OK, what other files should I look at?
Thanks,
Brian
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-
When I try to do a shutdown -h now command, it will do a reboot instead of a
halt. Inittab is set OK, what other files should I look at?
Thanks,
Brian
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-
Hi Deependra,
> I have 4MB VRAM, but still the graphics are showing as 256colors. how can I
> change the display to higher depth?
Look for "DefaultColorDepth" entries in /etc/X11/XF86Config and change these
to 16, 24 or 32. You need the according "Depth" entries for the same va
Hi,
> But then often samba is run as a standalone service, in which case you don't
> need to edit inetd.conf or the respective file in /etc/xinted.d. Just enable
> samba with ntsysv (setup).
Of course I meant to say: In which case you don't need (x)inetd at all.
Hi Michael and Aaron,
> RedHat 7 replaced inetd with xinetd. The file /etc/inetd.conf
> is replaced by the fileS in /etc/xinetd.d (?) with one file per program
> instead of one file for everything. Sooo... "man xinetd" and go from
> there.:-/
But then often samba is run as a
Hi David,
> >Also, something based on UNIX with the prettiness of Windows = BeOS.
>
> On that note, I admit I was captivated by my first (and only, and
> brief) exposure to Mac OS X ... finally, a computer for geeks AND
> their grandparents! ... -d
Yeah, it would be nice if th
Hi Robby,
> I am looking for feedback on the various versions of SSH.
> Specifically, I would like a comparison of the commercial vs free version(s)
> wrt functionality, security, stability and ease of configuration/deployment.
OpenSSH (it's on the powertools CD in 6.2) works f
Hi,
I am wondering how to obtain the /boot/module-info file that is
installed by the RedHat kernel rpms. What is it used for and how is it
generated?
Also, what is the /boot/vmlinux-2.2.16-22 file in the /boot directory.
Is this an uncompresses kernel image? Why is it there?
On Tue, 6 Feb 2001, John Aldrich wrote:
> Date: Tue, 6 Feb 2001 12:41:54 -0500
> From: John Aldrich <[EMAIL PROTECTED]>
> Reply-To: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Subject: What's this???
>
> Anyone know of anything (exploits) on the following ports?
> 1092, 1094, 1096, 1097
>
> These
Hello Peter,
> Who's the manager for the mailing list?
>
> Maybe we should *ALL* email him directly and ask for the message footer at the
> bottom to be changed to read something like:
>
> To unsubscribe from this list visit:
> https://listman.redhat.com/mailman/listinfo
Hy! Sorry about the enconvenience with the html mail...this shitty Outlook
was configured to html style..
but i promise that won't happen anymore! :) Well...about
my modem problem..i didn't solve it yet..but I'm still
hoping...
Bye!
And thanks for you mails!
__
Hi,
I am running RH 7.0 (kernel 2.2.16-22), (dual boot with Win 98)
and I have installed a US Robotics PCI modem. It is a hardware modem
not a win-modem , and the model is: Performance-Pro 3CP5610A (commonly
called just 5610 I believe). I cannot get it to work under linux and
heard that i
Hi,
Just wondering if anyone has had success running redhat linux on Elite
Athlon PC's (these are getting quite cheap on Ubid). I called ElitePC and
they used to support it, but do not any longer. I have tried to check the
hardware lists, but can find no references. Any help appreciated.
chee
Thanks Barrry, I got it working.
thanks a log
Thang
-Original Message-
From: Barry L. Kline [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 06, 2001 9:46 AM
To: [EMAIL PROTECTED]
Subject: Re: RSYNC with RedHat 7.0
Thang Nguyen wrote:
>
> Hi All,
>
> does anyone know how to setup
I have a Compaq Presario with a Compaq CV535 multisync monitor and Intel
82810E Graphics Adapter (on motherboard) and having trouble setting up
video for X. The install seemed to embrace the setup but X didn't work
and a lot of Compaq monitors are listed but not mine and any I select
manually that
All,
I would like to study the difference between ext2 and ufs
on linux and unix. Would you please provide any information
or reference URL for me to learn it. Thanks !
Regards,
Andrew So Hing-pong
[EMAIL PROTECTED]
___
Redhat-list mailing list
[EMA
report them to their respective ISP's / admins... Then blow them off... n
most cases they're dial-ups, so blocking them is of little good. [except
for getting rid of whole subnets :)]
> -Original Message-
> From: Ben Ocean [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, February 06, 2001 1:0
Hal Burgiss wrote:
> On Tue, Feb 06, 2001 at 06:28:45PM +0200, Alexandru Iruc wrote:
> > What do I need to do in order to run my HDD with ATA/100 enableb in
> > RH7.0?
>
ide: Assuming 33MHz system bus speed for PIO modes;
Jack Bowling wrote:
> Hold the horses. I have an ESC860 working perfectly on my RH7.0 box using LPRng but
>it worked well with RH6.1 b4, too, using lpr. The latest Gimp releases have a driver
>for the newer Epsons that works very well. The gimp print code is also released as a
>separate packag
Silently Chuck (and others) tweek their procmail recipes
Ding Lei wrote:
> Why you all do not believe that and no one want to help me?why?
> Do everyone of you thought that I do not have the ability to write an OS?
> But when Linux was written,no one knows that it will be so good today.
>
> Run /sbin/lsmod and see what is loaded. I am beginning to wonder if you
> have the printer port modules loaded.
it only lists my eho0 mod and sound mod..
but thats normal as I have my printer stuff compiled into kernel
however,,i finally got the right file i needed ( since i upgraded t
Hi;
I've recently taken over sysadmining my own box. I'm receiving regular
emails from my box about port attempts being made on it. Security's pretty
tight. Should I block these IPs from my box or just blow it off?
BenO
___
Redhat-list mailing list
[EMAIL PROTECTED] writes:
> Hi Harry Putnam
>
> This was a very good tutorial.
> I was not the person asking but anyway thank you very much for that.
>
> I have a similar problem but a little bit different,
> and wonder if awk can be used for that too.
>
> I am presently trying to learn per
Anyone know of anything (exploits) on the following ports?
1092, 1094, 1096, 1097
These were all on an *apparent* access attempt by someone on AOL. I *do* run
AIM and Yahoo messengers, btw
I'm not running any servers but I *do* have a live IP.
John
Thang Nguyen wrote:
>
> Hi All,
>
> does anyone know how to setup the Rsync server daemon in the Redhat 7.0?
> since the xinetd.conf is replaced with the /etc/inetd.conf and the format is
> different i'm not sure how to config on the RedHat 7.0, can anyone help
> please? my 6.2 format was: rsy
Hi Kapil!
> I am looking for some software which can send a
> notification on the event of network diconnectivity or
> some other faults. Please send me ths links
My preferred is NetSaint (www.netsaint.org or netsaint.sourceforce.net). You'll spend
some time learning how to configure it, but
> On Fri, Jan 26, 2001 at 11:06:44AM -0500, Warren Melnick wrote:
>
> Hi Warren Melnick,
>
> This was a very good tutorial.
> I was not the person asking but anyway thank you very much for that.
>
> I have a similar problem but a little bit different,
> and wonder if awk can be used for that too.
Hi. I was reading the following:
http://www.mozilla.org/crypto-faq.html
http://www.fas.org/irp/news/2000/01/000113-crypto-bxa.htm
but I'm still confused. Is it now okay to publish
crypto on my web site, as long as I notify the BXA?
Is there any restrictions for binary or source
differentiation?
"Greg Wright" <[EMAIL PROTECTED]> writes:
> *** REPLY SEPARATOR ***
>
> On 5/02/01 at 22:09 Aaron wrote:
>
> >Is it possible for a redhat install to be missing inetd.conf? I just
> >installed samba and the docs I am reading tell me to edit the inetd.conf
> >file, only I can't f
rpjday <[EMAIL PROTECTED]> writes:
> On Tue, 6 Feb 2001, Selim Jahangir wrote:
>
> > Dear All
> > Where can I find information about Red Hat Certfication Exam ?
>
> gee, i can't *begin* to guess. perhaps, just perhaps, www.redhat.com?
> you figure you can handle it from there? sheesh.
Geez r
Hi All,
does anyone know how to setup the Rsync server daemon in the Redhat 7.0?
since the xinetd.conf is replaced with the /etc/inetd.conf and the format is
different i'm not sure how to config on the RedHat 7.0, can anyone help
please? my 6.2 format was: rsync stream tcp nowait root
/
On Tue, 6 Feb 2001, David Brett wrote:
> Who should have the permissions. Right now only root has write
> permissions to this directory.
Named typically will run as user 'named' so make sure the directory (and
probably all the files) are read-writeable by named. It probably makes
sense to have
Hi
Any one who can direct me to a mailling list for Asembler in linux
I have been writing in ASM in Dos, but never in linux
and would like to get onto it again
Best regards
Mettavihari
Sri Lanka.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https
On Fri, Jan 26, 2001 at 11:06:44AM -0500, Warren Melnick wrote:
Hi Warren Melnick,
This was a very good tutorial.
I was not the person asking but anyway thank you very much for that.
I have a similar problem but a little bit different,
and wonder if awk can be used for that too.
I am present
On Tue, Feb 06, 2001 at 06:28:45PM +0200, Alexandru Iruc wrote:
> What do I need to do in order to run my HDD with ATA/100 enableb in
> RH7.0?
www.linux-ide.org and get the patch.
--
Hal B
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
--
I show up on http & sendmail... I think that's it...
ssh looks at hosts.allow, so only about 10 machines are allowed to see that
port..
Of course, those 2 or 3 ports let people know I'm there, but I don't mind,
as I tell
people about my firewall rules - they're good for learning from.
here the
On Tue, 06 Feb 2001, you wrote:
> Set your firewall rules up to deny any packets from being responded to...
>
> Then, when someone looks at any "normal" ports, it looks as if you're not
> there.
>
Trust me... I don't show up on a network "sniff" :-)
John
__
Why not ask all of your rpm questions on the rpm list... that's what
it's there for...
On Tue, 6 Feb 2001, Kapil Sharma spewed into the bitstream:
KS>hi,
KS>I am building rpm for apache on redhat7. Rpm builds
KS>the apache rpm successfulyy but when i try to install
KS>taht rom i get the followin
Hi. I have an ATAPI 4x2x32 CDRW used as a reader and a
SCSI Plextor 12x CDRW. The drives are in a 2.2.18 box
with software mirroring. The ATAPI drive is a slave,
where the master is one of the disks in the array.
Even when the system is completely idle, I'm unable to
do direct CD-to-CD copies wit
Hello!
I have RH 6.0 and squid 2.2.
Last days I have the following entries in my cache.log:
2001/02/06 13:33:43| sslReadClient: FD 15: read failure: (104)
Connection reset
by peer
2001/02/06 13:33:44| sslReadClient: FD 13: read failure: (104)
Connection reset
by peer
2001/02/06 13:33:44| sslReadCl
Who should have the permissions. Right now only root has write
permissions to this directory.
david
On Mon, 5 Feb 2001, Guillermo Navarrete wrote:
> Assuming this is a fairly standard DNS install, check the permissions on the
> /var/named and/or /etc/named so that they are writable by owner (
On Tue, 6 Feb 2001, Vineeta wrote:
> Is there an online exam for Redhat certification?
> And,if yes,which are the sites?
> Secondly,in case we need to physically go and give the exam at a
> particular location,then,how do we find out which all places it is
> hosted in?
No... there isnt. Teh onl
Hi all,
My home masquerade server got hacked. Intruder started up GRE and to fix I
am doing a complete reinstall with a better firewall install. However, when I
go to reinstall RH7 with the updates disk and a new boot disk, the installer
does not see the NICs (LinkSys). On a prior install t
Wow. You must be a genius. I never would have thought that kgcc must be
installed in order to work.
I already verified that kgcc was installed (installs by default when you
install Kernel Development but I checked anyway) and used RPM Verify to
ensure that it was installed properly.
As for you
www.redhat.com
On Tue, 6 Feb 2001, Selim Jahangir wrote:
> Dear All
> Where can I find information about Red Hat Certfication Exam ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
What do I need to do in order to run my HDD with ATA/100 enableb in RH7.0?
Thanks!
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Dumb question what is bugzilla and where do I fiind it?
david
On Tue, 6 Feb 2001, Greg Wright wrote:
>
>
> *** REPLY SEPARATOR ***
>
> On 5/02/01 at 18:28 David Brett wrote:
>
> >I have finally got two DNS servers up and working. One being a slave of
> >the first. Unfort
On Tue, 6 Feb 2001, Scott Sharkey wrote:
> Is it just me, or is the kernel-header package in rh7.0 actually a
> 2.4 header, but with a 2.2.16 kernel? I just compiled a module that
> I need, and now it's complaining about the version mismatch. I know
> I can force the module, but why is RedHat
Set your firewall rules up to deny any packets from being responded to...
Then, when someone looks at any "normal" ports, it looks as if you're not
there.
> -Original Message-
> From: Asoka Anon [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, February 05, 2001 11:15 PM
> To: [EMAIL PROTECTED]
___
Ing. Ernesto Espino
P.
Gerente de ACH Directo
Centro de Intercambio Automatizado,
S.A.
Teléfono: (507) 269-5896
Extensión: 233
Fax: (507) 263-7037
Is it just me, or is the kernel-header package in rh7.0 actually a
2.4 header, but with a 2.2.16 kernel? I just compiled a module that
I need, and now it's complaining about the version mismatch. I know
I can force the module, but why is RedHat installing a 2.4 kernel-header
with 2.2.16 kernel,
Hi,
I am facing one more problem:
I can install the same rpm build by me for any number
of time using
rpm -ivh [name]
. It should give me a error that this package already
installaed. What can be the reason???
kapil
__
Do You Yahoo!?
Yahoo! Auction
to be more specific ...
Training Homepage
http://www.redhat.ie/training/rhce/
RH033 Beginners
http://www.redhat.ie/training/rhce/rh033_desc.php3
RH133 Basic User
http://www.redhat.ie/training/rhce/rh133_desc.php3
RH253 Advanced/Experienced User/Admin
http://www.redhat.ie/training/rhce/rh253_
On Tue, 6 Feb 2001, Helmuth Guss wrote:
> what makes the difference between a rpm from redhat and mandrek ore suse
> or?
> i use rh7.0. can i install rpms from mandrek7.0 or suse7.0 or should i
> only use rpms from rh ?
>
> helmuth
>
You will probably have problems using RPMs from Mandrek 7.0
Hi,
I am looking for some software which can send a
notification on the event of network diconnectivity or
some other faults. Please send me ths links
Cheers
kapil
__
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://
hi,
I am building rpm for apache on redhat7. Rpm builds
the apache rpm successfulyy but when i try to install
taht rom i get the following error:
rpm -ivh ../RPMS/i386/apache-1.3.17-0.i386.rpm
error: failed dependencies:
/usr/local/bin/perl5 is needed by apache-1.3.17-0
and when uninst
what makes the difference between a rpm from redhat and mandrek ore suse
or?
i use rh7.0. can i install rpms from mandrek7.0 or suse7.0 or should i
only use rpms from rh ?
helmuth
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.red
Hello,
When I try to login Linux RedHat 6.2, I receive again the message to
type the login name. In other words, the Linux did not accept my user
name.
I tried to start the Linux as a Linux single user and than chage the
root password and my user password, but when I started the S.O., again
the
In my opinion,this e-mail is not intended for this list.
In the past also,you've been sending all such mails and also been asking
help on "how you should unsubscribe".
This list is not meant to discuss topics of general discussion.
Please find an appropriate forum for your msg.
And,if you still c
YOU say that our government is inefficient.
YOU say that our laws are too old. YOU say that the municipality does
not pick up the garbage. YOU say that the phones don't work, the railways
are a joke, the airline is the worst in the world, mails
never reach their destination. YOU say t
On Wednesday, February 07, 2001 4:42 AM, Deependra B. Tandukar
[SMTP:[EMAIL PROTECTED]] wrote:
| Greetings!
|
| I have 4MB VRAM, but still the graphics are showing as 256colors.
| how can I
| change the display to higher depth?
Add a line "Defaultcolordepth 16" in the display section of
/etc/X11
Is there an online exam for Redhat certification?
And,if yes,which are the sites?
Secondly,in case we need to physically go and give the exam at a
particular location,then,how do we find out which all places it is
hosted in?
Thanks in advance..
Vineeta
[EMAIL PROTECTED] wrote:
> www.rhce2b.com
www.rhce2b.com
steve
-Original Message-
From: Selim Jahangir [mailto:[EMAIL PROTECTED]]
Sent: 06 February 2001 10:01
To: [EMAIL PROTECTED]
Subject: Redhat Exam
Dear All
Where can I find information about Red Hat Certfication Exam ?
Thanks
selim
Greetings!
I have 4MB VRAM, but still the graphics are showing as 256colors. how can I
change the display to higher depth?
Looking forward to hearing from you.
Warm Regards,
DT
http://www.icimod.org.np
___
Redhat-list mailing list
[EMAIL PROTECTED]
On Tue, 6 Feb 2001, Selim Jahangir wrote:
> Dear All
> Where can I find information about Red Hat Certfication Exam ?
gee, i can't *begin* to guess. perhaps, just perhaps, www.redhat.com?
you figure you can handle it from there? sheesh.
rday
p.s. one of the components tested on the RHCE is
i think it's the passive mode problem. try to reconfigure your client (or
the server) to allow/disallow passive mode
hth
A 12:00 06/02/2001 +0200, vous avez écrit :
> hi all,
>
>I managed to redirect the www traffic with xinetd from the internet gateway
>to the inner www server
>I cannot do
Dear All
Where can I find information about Red Hat Certfication Exam ?
Thanks
selim
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
hi all,
I managed to redirect the www traffic with xinetd from the internet gateway
to the inner www server
I cannot do the same for the ftp
ftp port 21 works just fine
ftp-data port 20 gets no redirection
any ideas ?
Claudiu Balciza
___
Redhat-
On Tue, Feb 06, 2001 at 12:00:44AM -0600, Bret Hughes wrote:
> The linux revolution is just that. ...
I just *have* to point out that the Linux revolution is __not__ the OS.
For all intents and purposes, Linux is Unix--it looks, smells, tastes, and
feels like Unix. It breaks free of control by
On Mon, Feb 05, 2001 at 05:08:04PM -0500, Statux wrote:
>
> 16M is way too large for /boot. Even 5M is too much. 2-3M should be fine
> (but is still plenty).
[seyman@munshine seyman]$ du /boot/
2868/boot
Of course, this is with only the 2.2.16-3 kernel installed.
If I had kept the 2.2.14 ke
Yeah,thanks for the help..
I'll take care of the service aspect..
Cheers,
Vineeta
Greg Wright wrote:
> *** REPLY SEPARATOR ***
>
> On 6/02/01 at 14:25 Vineeta wrote:
>
> >Hi,
> >I need a GUI tool for remotely administering my linux box from another
> >Linux box.
> >Any pointer
1 - 100 of 104 matches
Mail list logo
