scsi0: BRKADRINT, error 0x1, seqaddr 0x0.
Removing one or more (or all) SCSI devices has no effect. Turning off the
scsi reset has no effect either.
Anyone have any suggestions on what to do?
Thanks,
NiElS
(btw, is there a debian install kernel without scsi? in case I had to resort
to installing on
y caveat is that now,
just as I was used to do when sitting behind a Sun, I have to hit Delete
if I make a typo in a search in more (/ key) instead of Backspace - but
Netscape works, and Pine too... (using compose-maps-delete-key-to-ctrl-d
or something)
I hope this helps,
which the drive never generates.
Pushing 'Eject' (outside button) helps, when the tray is fully opened
something is sent, and processes get a 'tray open' error, IIRC.
Niels
-- --- -- --- -- --- --
PIH XXTP SE
ook about 2 weeks to receive
> my CD from Simon.
Europe, three weeks. Still waiting for a bill though (don't know if the
credit card has been credited yet). Never got a receipt of order
confirmation of any kind...
(the CD is fine though :)
Niels
Hi,
Some packages, among them workbone and symlinks, still provide an a.out
binary in /usr/bin/, but no dependency on libc4 (workbone even depends on
libc5...).
Niels
--
Planet Internet Holding XXTP Support
havior too?", the answer is:
To /etc/hosts.allow, add
ALL: [EMAIL PROTECTED]
ALL: [EMAIL PROTECTED]
and be sure to use tcp_wrappers.
HTH.
Niels
-- --- - --- -- --- --
Planet Internet Holding XXTP Support Engineer
ctrl0,
or ippp0 and isdnctrl0?
Niels
-- --- - --- -- --- --
Planet Internet Holding XXTP Support Engineer <[EMAIL PROTECTED]>
I do not speak for my employer - they are perfectly able to do that.
RAID 0 array? Is it difficult to install?
Greets,
Niels
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
wrong,
http://www.1U-Raid5.net/HowTO/SW-Raid-HOWTO.txt this one is correct.
Alvin Oga wrote:
On Mon, 4 Oct 2004, Niels wrote:
I want to buy a Promise Fasttrack TX2 plus RAID 0 controller with two
SATA hard disks. The controller is a software controller. I want no
other hard disks than these two
isks other than the RAID 0'ed disks.
Best wishes,
Paul
->>In response to your message<<-
--received from Niels--
I shall explain my choises. I really want to buy a RAID 0 (striping)
controller, because my current harddisk is the bottleneck in my current
system. I have a dual XP-M 2
I had the same problem, where a mcop directory couldn't be created. I don't
mind to have a kde (partly?) hanging around though.
How I fixed it was:
`rm -rf ~/.kde ; kde-menu`
The later command recreated my ~/.kde directory and fixed my broken
~/.kde/tmp-${USER} symlink and added a~/.kde/sock
cannot print. When I have finished scanning and stopped the hpoj daemon,
I also need to restart the printer before I can print. It also works if
I disconnect an reconnect the USB cable.
Do you know a way to do this with software, so I can script the whole
process?
--
Mvh.
Niels Andersen
ess enter.
Now you can edit it :-)
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
o debate this !!
What I dont want in my inbox, is mails that contains political and religious
issues.
Of course I can drop out of this list if I dont want to discuss it, but then
where should I go to get help with Debian related stuff ?? Anyone ??
--
/Niels
Registred Linux user #133791
Get count
Ron Johnson wrote:
> IRC?
Thanks, I'm out of here, bye!
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Hi list
I get this error when trying to do the daily update.
http://picasaweb.google.co.uk/nielsrasmus/Screenshots/photo#5037455125361547874
What is the procedure now, to make it work again ?? Never seen this before :-/
--
/Niels
Registred Linux user #133791
Get counted at http
Hi list
I get this error when trying to do the daily update.
http://picasaweb.google.co.uk/nielsrasmus/Screenshots/photo#5037455125361547874
What is the procedure now, to make it work again ?? Never seen this before :-/
--
/Niels
Registred Linux user #133791
Get counted at http
e this before, so every help are appreciated :)
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
A small beginners minihowto about various linux programs is made:
Among others: kmail, bittorrent, ksirc, gimp, gparted, scrapbook, freenet,
kde-setup, kubuntu install and some others.
The idea is to get newbies started using linux immediately, with the most
elementary things.
Has taken me a l
Hi all
I am new to this list, works as Architectural engineer in Copenhagen DenmarK.
I have used several Linux distro's previously back in 1999, among them was:
Red Hat, Mandrake and Suse.
But due to my work (AutoCad) I had to install Windows (sadly enough !)
Now I've been fooling around with
Thanks for reply.
I'm not sure I want to repartitioning my other harddrive because I
have 60 GB of music and fotos on it, so only one of them should have
Debian on it.
I presume it's possible to mount the media harddrive and catch my
stuff from there ?
My router has a fine internal firewall so h
Etch, certainly. However, be prepared for Etch to be "obsolete" well
before the next Debian release. You will most likely want to change
your pointers to either "testing" or "unstable", but don't do that
until you are comfortable with Debian and the apt way of package
management as a user. I've be
It's same thing here !
Just waiting for the site to come up, so I can install "Etch" :-)
/niller
2006/12/16, Hans du Plooy <[EMAIL PROTECTED]>:
Is http://cdimage.debian.org/ down? I'm getting time-outs all day.
Tried from my UK server too - same result.
Thanks
--
To UNSUBSCRIBE, email to [
Andrew Sackville-West skrev:
On Sat, Dec 16, 2006 at 03:11:34PM +0100, Niels Rasmussen wrote:
I wonder, if I put that LiveCD with Ubuntu back in, is there some
commands I can use to get all the info I need to install "Etch" ???
debootstrap. I'm sure ubuntu has got i
6/12/16, Andrew Sackville-West <[EMAIL PROTECTED]>:
On Sat, Dec 16, 2006 at 07:54:09PM +0100, Niels Rasmussen wrote:
> Andrew Sackville-West skrev:
> >On Sat, Dec 16, 2006 at 03:11:34PM +0100, Niels Rasmussen wrote:
> >
> >>I wonder, if I put that LiveCD with Ubun
Hi all
As John C suggested the "radeon" trick worked :-)
Now I can use X as root, but not as user !
I get this error:
"X: user not authorized to run the X server, aborting.
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server
-- Forwarded message --
From: Niels Rasmussen <[EMAIL PROTECTED]>
Date: 20/12/2006 11.24
Subject: Re: X aborting
To: [EMAIL PROTECTED]
Sorry, should have mentioned it.
I've installed Etch and xorg seems to be the new standard X in Etch.
It's odd though, I hav
On Wed, 20 Dec 2006 20:53:35 +
Chris Lale <[EMAIL PROTECTED]> wrote:
> Niels Rasmussen wrote:
> >
> > [...]
> > What is the syntax of the sudoers file ?? Or is there a smarter
> > linux command that'll do the trick ? (my linux capabilities
Well didn't know what happened :-)
Guess the RAMS didn't emptying itself at first, but today when I
want to solve to "X aborting" thing, the Gnome suddenly appear on the
screen :-D
Oh boy !!
This is what have wanted for so long !
Debian on my own box !!!
The installation was a breeze, actu
Hi list
I 'm running on a amd-64-Etch install with a 19" LCD-1280x1024:
I've found these two bootscreens from LinuxQuestions.org:
This one is a typical debian bootscreen, an what mine looks like:
http://home.tiscali.nl/isildur/d-i/nl/images/20.02_boot.jpg
and this one is from the gentoo distro:
dont think it is Sylpheed-claws because the 2.6.0 editon should be
stable and the mailprogram itself works without any complaints at all.
So my guess is, that it has something to do with GTK.
But what ? And how can I change this so these errors doesn't come up ?
Any GTK experts out there ?
to me how I get around this ?
I'm running Etch.
Thanks!
--
/Niels
Registred Linux user #133791
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
outer (D-link
DI-524), the installer suggested opasia.dk, my ISP provider,
which I (in my ignorance) accepted.
Is this possible without cutting my internet connection ?
Thanks for your time.
--
/Niels
Registred Linux user #133791
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subje
Hi list,
I'm running debian testing etch.
I have this line in my.xsession-errors:
DOUBLE-CLICK: 400 --> -1 THRESHOLD: 8 --> -1 Warning: unrecognized command
line flag -P
It appears everytime I start Icedove.
What does this mean ??
--
/Niels
Registred Linux user #133791
Get
servicemanager dies) ?
And when I type 'top' in my terminal theres a lot of services named
k.something running as well ??
Have I missed something here ?
How do I bring this back to a sane state ??
(Nothing suspicious in .xession-errors though !)
--
/Niels
Registred Linux use
f, the
servicemanager dies) ?
And when I type 'top' in my terminal theres a lot of services named
k.something running as well ??
Have I missed something here ?
How do I bring this back to a sane state ??
(Nothing suspicious in .xession-errors though !)
--
/Niels
Re
Liam O'Toole wrote:
On Fri, 09 Feb 2007 16:58:29 +0100
Niels Rasmussen <[EMAIL PROTECTED]> wrote:
Now when I'm happily back in Gnome I checked
Desktop > Administration > Services
Here I can see kdm is running in the background (I cant turn it off,
the service
.
Does such a utility exist for use with debian (or something similar) ?
I've read about LAMP but cant find it in the repositories :-/
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "u
ng up a webserver from scratch and this
one works very well for me :-)
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Fabian (Lists) wrote:
Niels Rasmussen wrote:
SL Lists wrote:
I used Apachefriends' XAMPP on both Windows and Linux. Have a look at
http://www.apachefriends.org/en/xampp.html
Hi again,
I have two problems right now:
1. in my terminal this comes up repeatedly:
libgcc_s.so.1 mu
-it-comes.html
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
.mozilla/plugins. The files are flashplayer.xpt and
> libflashplayer.so. I'm running Firefox and this is where it wants them.
Are you sure ?? (I had to create the plugins dir maually).
It doesn't work here :-/
I'm running debian testing (etch)
Could you please share so
> ...
>
> which is correct because the global installation still has 7.0 and my
> private installation has 9.0.
Well, still no can do!
But found the answer anyway:
ERROR: Your architecture, \'x86_64\', is not supported by the
Adobe Flash Player installer.
:-(
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
s IMHO the best feature in Icedove!
Keep pressing the Spacebar makes you read all the post in all the folders
rather quickly :)
--
/Niels
Registred Linux user #133791
Get counted at http://counter.li.org
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I am using debian etch (testing) and mixmaster 3.0b2-3
When sending mails with mixmaster, the mails never reach their destination
mail address.
I first run mixmaster-update --verbose, and then mixmaster.
Everything looks perfect, and the mails seem to be sent.
I have even tried sending from de
Thanks :-)
Here is a short abstract from my exim4 log:
/var/log/exim4/mainlog
2007-02-19 21:25:17 1HJF4X-y4-SI => x
<[EMAIL PROTECTED]> R=local_user T=mail_spool
2007-02-19 21:25:17 1HJF4X-y4-SI Completed
2007-02-19 21:27:34 1HJF6k-yP-V2 <= [EMAIL PROTECTED]
U=xx P=local S=
No, sorry, I am not flushing the queue?
How do you flush the queue, and where are the mail messages in the queue
placed?
Thanks in advance? :-)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
***
[EMAIL PROTECTED]:~$ su
Password:
debian:/home/niels# ifconfig eth1 hw ether 00:15:F2:8D:92:56
debian:/home/niels#
debian:/home/niels# ifdown eth1
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http:/
Hi florian
I have ./usr/share/apps/zeroconf but that is a filecatalog with 8
files ending with ._tcp
How should I purge it ?
2007/2/22, Florian Kulzer <[EMAIL PROTECTED]>:
On Thu, Feb 22, 2007 at 20:43:13 +0100, Niels Rasmussen wrote:
> Hi all
>
> Today when I want to enter www
Okay.
But what values do I need to set, when running "dpkg-reconfigure
exim4-config"?
===
Here is a copy of my update-exim4.conf file:
# /etc/exim4/update-exim4.conf.conf
#
.
.
# This is a Debian specific file
dc_eximconfig_configtype='smarthost'
dc_other_hostnames='xxx.localdom
What does the avahi-daemon do ?
And what is the proper way to remove it ?
/Niels
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Is this the problem and should it be save to remove it with synaptic ??
/Niels
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
2007/2/22, Todd A. Jacobs <[EMAIL PROTECTED]>:
On Thu, Feb 22, 2007 at 08:43:13PM +0100, Niels Rasmussen wrote:
> My stationary PC is connected with a D-link router DI-524 via cable.
You might try rebooting your router, and then rebooting your PC.
Sometimes the DHCP servers on t
Todd A. Jacobs wrote:
> On Thu, Feb 22, 2007 at 08:43:13PM +0100, Niels Rasmussen wrote:
>
>> My stationary PC is connected with a D-link router DI-524 via cable.
>
> You might try rebooting your router, and then rebooting your PC.
> Sometimes the DHCP servers on these SO
lp that'll help me fixing my problem.
Kind regards
Niels
Text: GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://produkte.web.de/go/04/
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debia
-
Dr. N.Oesingmann
Siemens AG Medical SolutionsPhone: 09131/84 2675
Med MREA-ProC Fax:09131/84 2186
Karl-Schall-Str. 6
I am using debian sarge.
When I try to run: "sudo synaptic" I get the below warning.
(synaptic:4338): Gtk-WARNING **: cannot open display:
I have to my ~/.bash_profile file added following, according to advice from
some mailing list, but it does not help:
if [[ -z $DISPLAY ]]; then
exp
I am using debian sarge.
When I try to run: "sudo synaptic" I get the below warning.
(synaptic:4338): Gtk-WARNING **: cannot open display:
I have to my ~/.bash_profile file added following, according to advice from
some mailing list, but it does not help:
if [[ -z $DISPLAY ]]; then
expo
you're looking for?
http://bashish.sourceforge.net/about.html
But I don't know about any debian package.
nift
--
Niels Felsted Thorsen _ [EMAIL PROTECTED] _
ght
tell you whether you have a software problem or a hardware problem :)
Good luck
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Sebastian Kapfer <[EMAIL PROTECTED]> writes:
> On Wed, 13 Aug 2003 13:50:06 +0200, Niels L. Ellegaard wrote:
>
> > I upgraded from Woody to Sarge last week, and now I cannot start my
> > gnome. Xfree and KDE works. Well actually I had some problems with the
> >
that this problem will dissapear by itself as new
gnome2 packages enter testing?
Thanks in advance for any help
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "u
ackage1
apt-get install package2
dpkg -P package2
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
I have some trouble loading the module usb-uhci into my kernel (It is
a 2.4.21 and I am using Sarge). I would be very grateful for a hint
of what I am doing wrong. Where should I look to gain further knowledge?
Thanks in advance
Niels
nissefisken# lsmod
csj <[EMAIL PROTECTED]> writes:
> At 02 Sep 2003 22:19:32 +0200,
> Niels L. Ellegaard wrote:
> > I have some trouble loading the module usb-uhci into my kernel
> > (It is a 2.4.21 and I am using Sarge). I would be very grateful
> > for a hint of what I am doing
_USB_PWC=m
CONFIG_USB_SE401=m
# CONFIG_USB_STV680 is not set
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
g the card :)
http://www.amazon.com/exec/obidos/tg/detail/-/B6HMPK/102-2274641-3931347?v=glance
I have been to 10 shops without finding an USB 1.1 uhci card. They
seem to be history :(
Thanks for all the advices
Niels
All the following text is pr
If somebody know how to get a scsi cdrom drive working with the debian
dist. plz mail back.
P.S. have read the SCSI-HOWTO from LDP at the sunsite-chain.
Regards
Niels P. / Ian J.
[EMAIL PROTECTED] / [EMAIL PROTECTED]
--
Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
es made it into Sarge. I just
send a bug report.
While I am at it I promise my eternal admiration and love to anyone
who make Galeon work in Sarge again. It is such a nice program :)
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
Heat is the self-restoration of m
onvert
> Galeon bookmarks to Mozilla without Galeon" dated 11/23/03
Thanks for the hints (I must be a little slow).
Would it be correct to add a warning that the package Galeon conflicts
with one of the packages in Gnome 2.4?
Niels
--
Niels L Ellegaard
tried with: libobjects-0.1.19-1.deb but it didn't help.
thanks in advance, Niels Bo Johansen
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
y everything. I can tell that
DOS (5.0 or 6.2) is running fine on my machine, but on the other side
a real mode system as DOS does not require much of the host adapter.
Niels Bo Johansen
On Mon, 27 Sep 2004 14:31:50 +0200
[EMAIL PROTECTED] wrote:
> Under xemacs 21 it is possible to compile a latex file by issuing the command
> 'C-c C-r'. Unfortunately this runs the plain 'latex' command whilst I'd
> like to run 'pdflatex' (and also ConTeXt via texexec).
>
> How could I reach thi
g to shell)
if (dpkg -l package-name | grep -c ii ) apt-get install package-name;
if (dpkg -l package-name | grep -c ii ) dpkg -i ./package.deb;
But I still don't understand why you wish to do all this. In most cases it is
easier to upgrade all packages at once:
apt-get update &&
On Mon, 15 Nov 2004 10:52:22 -0800 (PST)
Sergio Basurto Juarez <[EMAIL PROTECTED]> wrote:
> To find a key k in an array v with indexes from 0 to
> n-1, begin with x0 = 0, x1 = n-1, and i = 1. Compute
> the next position with
> xi+1 = xi - (v[xi]-k) * (xi - xi-1)/(v[xi] - v[xi-1]).
> If this lies o
x is as similar to the average Unix system, as the
average Unix system is similar to other Unix systems.
Niels
PS: I hope to be corrected if I have misunderstood.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
oment, Unison uses
the 8-bit API, as this is what is provided by Ocaml under Windows. I
think we should eventually switch to the Unicode API (or maybe allow
to choose between the two APIs). However, this is a significant
amount of work, and none of the Unison developpers are using
Windows...
-- Jerome
oogle.com/search?q=pwc+ohci+timeout
Good luck
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
:)
Some of the preferences are still missing, but I don't really miss
them.
I conclusion I would say that 1.3.11a is a better browser than
1.25. Galeon has become a power browser again :)
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUB
quot;The web and only the web" :)
However I believe that Galeon works nicely together with sylpheed and
evolution. (I am writing this post using xemacs/GNUS and SSH, so there
is no hope for me :)
Med venlig hilsen
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
should I read to understand them better?
Thanks in advance
Niels
nissefisken# apt-get remove alsa-modules-2.4.22-1-386
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages will be REMOVED:
alsa-modules
ie=UTF-8&selm=1OiKz-8is-33%40gated-at.bofh.it&rnum=1
Sonmeone posted that he got the following error
fglrx: no version for "struct_module" found: kernel tainted.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY'
taints kernel.
[fglrx] Max
ii xserver-xfree86 4.1.0-16woody3
I would be most graful for any hints. Thanks in advance
Niels
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[EMAIL PROTECTED] (Niels L. Ellegaard) writes:
> nvidia: no version for "struct_module" found: kernel tainted.
> nvidia: module license 'NVIDIA' taints kernel.
> 0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336
> Wed Jan 14 18:29:26 PST 2004
serious risk or am I just being paranoid?
Thanks in advance
Niels
PS: I realize that I can often use to apt-source, but I like plug-and-play :)
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL
uch about knoppix. Anyway here is a link to a relevant
page in apt-howto.
http://www.debian.org/doc/manuals/apt-howto/ch-apt-get.en.html#s-default-version
If you get an error named invalid record then you may have made a
typing error in the file.
Niels
PS: Most
backtrace?
Thanks in advance
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[EMAIL PROTECTED] (Niels L. Ellegaard) writes:
> In conclusion I am left with a system with no xserver. XFree86
> doesn`t start in Sarge and I cannot downgrade. As a final attempt
> before reinstall I would like to start xfree86 in gdb, and see if I
> can construct a backtrace. Perh
in advance
Niels
PS: GPL definition of sourcecode
http://www.gnu.org/copyleft/gpl.html
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all
[EMAIL PROTECTED] (Niels L. Ellegaard) writes:
> Do the xcf-files count as sourcecode? (according to the GPL)
I just noted that this question is currently being discussed at
debian-legal.
Sorry about the noise :)
Niels
--
Niels L Ellegaard h
ile preparing to compile the kernel)
Searching google you can find much info on your nvidia problem. I know
toob little to judge what is goo and what is bad, so I will just give
you this senseless link :)
http://www.google.com/search?q=cannot%20find%20nvidia.ko
Good l
Niels
A bit of extra info:
root:gnalle# cat /etc/mtab
/dev/ide/host0/bus0/target0/lun0/part3 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/ide/host0/bus0/target0/lun0/part1 /boot ext2 rw 0 0
/dev/ide/host0/bus0/target0/lun0/part4 /home
examine to
find out?
I am using Sarge, and I recently upgraded from xfree86 4.0 to
xfree86 4.3
thanks in advance
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubs
ated XFConfig-4 files. I think that I can help you :)
Niels
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but woul
86 in gdb to create a log?
Thanks in advance
Niels
Here is the log:
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted
to [EMAIL PROTECTED] Before reporting bugs in pre-release v
opularity of female-only
skiing courses.
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
ashing. This way I can limit the number of sources of error.
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
eating a backtrace of XFree86?
Would such a backtrace be useful?
I can send send all the output, but I am slightly afraid of flooding.
Do Debian gurus use dial-up? :)
Thanks for the help
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Kent West <[EMAIL PROTECTED]> writes:
> Niels L. Ellegaard wrote:
> >I removed the part about the generic mouse because I got a
> >complaint that I did not have the device /dev/input/mice (I don't
> >know how to create it... I make a symbolic link, and it get&
D10 alsa-modules-2.4.22-1-386
killall -9 rplayd
dpkg --purge -D10 alsa-modules-2.4.22-1-386
Profit
Thank you for the helpful advice.
Niels
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
1 - 100 of 113 matches
Mail list logo
