I have some trouble loading the module usb-uhci into my kernel (It is
a 2.4.21 and I am using Sarge). I would be very grateful for a hint
of what I am doing wrong. Where should I look to gain further knowledge?
Thanks in advance
Niels
nissefisken# lsmod
Module Size Used by Tainted: P
nvidia 1628576 11 (autoclean)
sis900 14412 0 (unused)
i810_audio 25756 1
ac97_codec 11892 0 [i810_audio]
soundcore 4260 2 [i810_audio]
usbcore 73036 0
i2c-proc 7344 0 (unused)
i2c-core 13892 0 [i2c-proc]
parport_pc 13732 1 (autoclean)
lp 6592 1
parport 16096 1 [parport_pc lp]
8139too 15912 1
rtc 7464 0 (autoclean)
nissefisken# modprobe usb-uhci
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: insmod
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o failed
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: insmod
usb-uhci failed
nissefisken# dmesg | tail -n 5
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb-uhci.c: $Revision: 1.275 $ time 12:38:20 Aug 16 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
nissefisken# modprobe usb-uhci
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO
or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: insmod
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o failed
/lib/modules/2.4.21/kernel/drivers/usb/host/usb-uhci.o: insmod
usb-uhci failed
nissefisken% ls /lib/modules/2.4.21/kernel/drivers/usb/host
uhci.o usb-ohci.o usb-uhci.o
Here are some lines from /usr/src/linux/.config. Dunno if they are useful
#
# USB support
#
CONFIG_USB=m
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_UHCI=m
CONFIG_USB_UHCI_ALT=m
CONFIG_USB_OHCI=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_MIDI is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# USB Multimedia devices
#
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
# CONFIG_USB_STV680 is not set
--
Niels L Ellegaard http://dirac.ruc.dk/~gnalle/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
