I have been trying to install a logitech 4000 webcam, but when I use camstream the picture freezes after a short while and the following line appears in /var/log/syslog Sep 3 20:30:22 nissefisken kernel: usb_control/bulk_msg: timeout
I would be very grateful for any advice on how to avoid this problem. My computer is a x86 with a k7s5a board and Sarge and my own 2.4.21 kernel (See below). Browsing around on Google it looks like my usb ports are getting overburdened, so tried the closed source pwcx compressor module. This modules helped a little, I was able to save 10 snapshots before the timeout appeared, but in the end I still had a freeze. The following data is from a test with no pwcx module nissefisken# lsmod Module Size Used by Tainted: PF pwc 44748 1 (autoclean) usb-ohci 20040 0 (unused) nvidia 1628576 11 (autoclean) sis900 14412 0 (unused) i810_audio 25756 2 ac97_codec 11892 0 [i810_audio] soundcore 4260 2 [i810_audio] usbcore 73036 0 [pwc usb-ohci] i2c-proc 7344 0 (unused) i2c-core 13892 0 [i2c-proc] parport_pc 13732 1 (autoclean) lp 6592 1 parport 16096 1 [parport_pc lp] 8139too 15912 1 rtc 7464 0 (autoclean) >From dmesg: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.10 loaded. pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. usb.c: registered new driver Philips webcam pwc Logitech QuickCam 4000 Pro USB webcam detected. pwc Registered as /dev/video0. usb.c: Philips webcam driver claimed interface cf171920 usb_control/bulk_msg: timeout >From /var/log/syslog Sep 3 20:30:16 nissefisken kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.10 loaded. Sep 3 20:30:16 nissefisken kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, Sep 3 20:30:16 nissefisken kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. Sep 3 20:30:16 nissefisken kernel: usb.c: registered new driver Philips webcam Sep 3 20:30:16 nissefisken kernel: pwc Logitech QuickCam 4000 Pro USB webcam detected. Sep 3 20:30:16 nissefisken kernel: pwc Registered as /dev/video0. Sep 3 20:30:16 nissefisken kernel: usb.c: Philips webcam driver claimed interface cf171920 Sep 3 20:30:16 nissefisken insmod: Note: /etc/modules.conf is more recent than /lib/modules/2.4.21/modules.dep Sep 3 20:30:22 nissefisken kernel: usb_control/bulk_msg: timeout Output from camstream: CCamWindow::CCamWindow() CWebCamViewer::CWebCamViewer(0x80ab770, 0x0) CVideoDevice::Init() Using mmap(), VMBuf.size = 921600 Trying to find video options for Logitech QuickCam Pro 4000:/dev/video0 searching Logitech QuickCam Pro 4000 CSnapshotSettingsDlg::CSnapshotSettingsDlg(...) QFont::setRawMode(): Invalid XLFD: "system" CVideoSettingsDlg::SizeChanged(176x144) CVideoSettingsDlg::FramerateChanged(10) Philips webcam detected, enabling extensions CCamPanel::SetSize(176x144) CCamPanel::SetImageSize(176x144) CCamPanel::SetVisibleSize(176x144) CCamPanel::SetSize(176x144) CCamPanel::SetImageSize(176x144) CCamPanel::SetVisibleSize(176x144) RecalcTotalViewSize: resize viewport(176x144) EnableRGB: + CVideoDevice::SetPalette picked palette 15 [yuv420p] CVideoDevice::CreateImagesRGB() allocating space for RGB CVideoDevice::StartCapture() go! >From /etc/modules.conf alias char-major-81 videodev alias char-major-81-0 pwc # The following lines have been commented out # options pwc size=vga leds=250,250 fps=25 mbufs=3 compression=0 # post-install pwc insmod --force -k /lib/modules/2.4.21/kernel/drivers/usb/pwcx-2.4.20.o > /dev/null 2>&1 || : Random lines from my /usr/src/linux/.config # # USB support # CONFIG_USB=m CONFIG_USB_DEBUG=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # # USB Host Controller Drivers # CONFIG_USB_UHCI=m CONFIG_USB_UHCI_ALT=m CONFIG_USB_OHCI=m # # USB Multimedia devices # # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set CONFIG_USB_PWC=m CONFIG_USB_SE401=m # CONFIG_USB_STV680 is not set -- Niels L Ellegaard http://dirac.ruc.dk/~gnalle/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
