Bug#419978: linux-image-2.6.20-1-amd64: wont boot, locks up box (2.6.18-4-amd64 works flawlessly)

Package: linux-image-2.6.20-1-amd64 Version: 2.6.20-2 Severity: important While booting, the kernel locks up hard. 2.6.18-4-amd64 boots up just fine. 2.6.20-1-amd64 only boots up with "acpi=off" being added to the kernel line. Note that 2.6.18-4-amd64 works perfectly with acpi on, which is real

Bug#419979: linux-image-2.6.20-1-amd64: wont boot, locks up box (2.6.18-4-amd64 works flawlessly)

Package: linux-image-2.6.20-1-amd64 Version: 2.6.20-2 Severity: important While booting, the kernel locks up hard. 2.6.18-4-amd64 boots up just fine. 2.6.20-1-amd64 only boots up with "acpi=off" being added to the kernel line. Note that 2.6.18-4-amd64 works perfectly with acpi being on, which

Bug#419977: yet another misspelling in package description

Package: python-ooolib Version: 0.0.8-2 Severity: minor Hello, close to the typo criticized by #418512 s/OpenDocunent/OpenDocument/ Best regards Uwe -- System Information: Debian Release: lenny/sid APT prefers testing-proposed-updates APT policy: (900, 'testing-proposed-updates'),

Bug#419975: [Pkg-xfce-devel] Bug#419975: xfce4 dependencies are not installable

severity #419975 normal tag #419975 pending thanks On mer, 2007-04-18 at 22:22 -0800, nathan wrote: > From: Nathan <[EMAIL PROTECTED]> > To: Debian Bug Tracking System <[EMAIL PROTECTED]> > Subject: xfce4 dependencies are not installable > Message-ID: <[EMAIL PROTECTED]> > X-Mailer: reportbug 3.35

Bug#313051: Bug #313051: Incorrect vi.po file still here

found 313051 4.5.0-1 thanks I'm afraid that the incorrect vi.po file in aolserver4 appeared again (see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=313051;msg=15). Correct vi.po file attached. -- vi.po Description: application/gettext signature.asc Description: Digital signature

Bug#419976: joe: lua.jsf not installed

Package: joe Version: 3.5-1.1 Severity: normal /etc/joe/syntax/lua.jsf is not installed, even though dpkg thinks it is (i.e. dpkg -S): sfo1:/tmp# dpkg -S lua.jsf joe: /etc/joe/syntax/lua.jsf sfo1:/tmp# ls -l /etc/joe/syntax/lua.jsf ls: /etc/joe/syntax/lua.jsf: No such file or directory sfo1:/tmp#

Bug#419928: mirror submission for ftp.grokthis.net

On Thu, Apr 19, 2007 at 12:29:03AM -0400, Eric Windisch wrote: > > ftp://ftp.grokthis.net/mirrors/debian/pool/main/b/base-files/ contains > > _powerpc.deb files. > > Removed. The source packages must be available, so please don't exclude *.tar.gz *.diff.gz or *.dsc Thanks -- Simon Paillard -

Bug#419975: xfce4 dependencies are not installable

From: Nathan <[EMAIL PROTECTED]> To: Debian Bug Tracking System <[EMAIL PROTECTED]> Subject: xfce4 dependencies are not installable Message-ID: <[EMAIL PROTECTED]> X-Mailer: reportbug 3.35 Date: Thu, 19 Apr 2007 01:10:41 -0500 Package: xfce4 Version: 4.4.1 Severity: important -- System Informati

Bug#419906: Installation stops after retrieving packages

My hardware includes an ASUS P5B-Deluxe/WiFi-AP. In the Debian Etch installer I chose only "standard system" in the software selection screen. After retrieving packages the installation stopped. "retrieving package 81 of 81" stays on the screen and nothing happens. If I choose to install nothing

Bug#419974: mysql-dfsg-5.0: [debconf_rewrite] Debconf templates review

Package: mysql-dfsg-5.0 Version: N/A Severity: normal Tags: patch Dear Debian maintainer, On Saturday, April 07, 2007, I notified you of the beginning of a review process concerning debconf templates for mysql-dfsg-5.0. The debian-l10n-english contributors have now reviewed these templates, and

Bug#419945: mediawiki1.7: [INTL:es] Spanish translation update

> Please use the attached PO file to update mediawiki1.7's translation (as > requested by Christian) > > Please notice I've marked in the PO file several msgids that need REVIEW > since I belive they need to be fixed. The most grave seems to be this one: > > msgid "" > "Please provide a MySQL acc

Bug#419903: openafs-client: aklog crashes with LWP: stack overflow in process IO MANAGER!

Thomas Bushnell BSG <[EMAIL PROTECTED]> writes: > On Wed, 2007-04-18 at 11:21 -0700, Russ Allbery wrote: >> Can you try applying the following patch to the source package and >> rebuilding? I don't have a Debian PPC system running AFS to easily >> test with, but we think this may fix the problem.

Bug#419973: no WPA support in network-admin

Package: gnome-system-tools Version: 2.14.0-3 network-admin tool does not show WPA options in wireless interface configuration. Wireless connection is working, if it is manually configured in /etc/network/interfaces. I suspect that gnome-system-tools added wpa support only in 2.18 version. -- T

Bug#419903: openafs-client: aklog crashes with LWP: stack overflow in process IO MANAGER!

On Wed, 2007-04-18 at 11:21 -0700, Russ Allbery wrote: > Can you try applying the following patch to the source package and > rebuilding? I don't have a Debian PPC system running AFS to easily test > with, but we think this may fix the problem. I'm in the middle of a crunch moment in the preparat

Bug#419928: mirror submission for ftp.grokthis.net

> ftp://ftp.grokthis.net/mirrors/debian/project/trace/localhost.localdomain > should be named ftp.grokthis.net. You can fix that in the anonftpsync > script itself (script that is highly recommended). Updated the HOSTNAME variable in the script. It should be fixed upon the next run of the scrip

Bug#414606: closed by Aurelien Jarno <[EMAIL PROTECTED]> (Closing bugs fixed in unreleased version 2.4-1 of the glibc)

This report might save someone a headache, but the bug should probably stay closed. You might want to make new libc6 conflict with old versions of gdb... With gdb 6.6 and libc6 2.5-2, it seems to be fixed, at least on x86. libc6-dbg works fine too. However, under x86 and amd64 the bug came

Bug#419972: sylpheed: ..spam spoof spoofs html redering, puts "real" Paypal at armordolls.it

Package: sylpheed Version: 2.4.0~beta8-1 Severity: critical Justification: causes serious data loss ...this html mail snip: Please visit the resolution center located here http://www.armordolls.it/pay.html"; >https://www.paypal.com/cgi-bin/webscr?cmd=_login-run=res-center to verify your identit

Bug#419879: libc6 upgrade error

Thank you for the response. Here is output of 'ls -l /lib/tls' and content of /var/log/dpkg.log. BTW, I run mv /lib/tls /lib/tls.old' and then tried upgrade again, but I encountered the same error. Maybe I missed something to do. --- ls -l /lib/tls --- total 2160 drwxr-xr-x 2 root root409

Bug#419971: python-syck: PySyck 0.61 released

Package: python-syck Version: 0.55-3.3+b1 Severity: wishlist Hi, PySyck 0.61.2 was released about a year ago at http://pyyaml.org/wiki/PySyck. It features many wonderful things (such as being able to emit YAML as well as parse it), but breaks from Why's Python extension in Syck (which has since (

Bug#415140: Split the package?

Maybe transmission should be split into 2 packages - one for the gtk version and one for the cli? The cli version should have very few external dependencies. -- James Healy Thu, 19 Apr 2007 13:54:48 +1000 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble?

Bug#419970: transmission: Version 0.7 available

Package: transmission Version: 0.6.1.dfsg-1 Severity: wishlist Version 0.7 of transmission was released on 18th April 2007. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.16-xenU-rimu6 Locale: LA

Bug#419904: gst-plugins-bad0.10: please upload 0.10.4 to unstable

On Wed, 2007-04-18 at 11:48 -0400, Aaron M. Ucko wrote: > Package: gst-plugins-bad0.10 > Version: 0.10.3-3.1 > Severity: important > > unstable still has only gstreamer0.10-plugins-bad 0.10.3, against > which gstreamer0.10-plugins-good now declares a versioned conflict > (due to plugins switching

Bug#419969: codespeak-lib_0.9.0-3(hppa/unstable): FTBFS: ssh missing

Package: codespeak-lib Version: 0.9.0-3 Severity: serious There was an error while trying to autobuild your package: > Automatic build of codespeak-lib_0.9.0-3 on bld-3 by sbuild/hppa 98 > Build started at 20070418-1401 [...] > ** Using build dependencies supplied by package: > B

Bug#370801: Please blacklist orinoco and orinoco_pci

Hi, Is there any way to continue blacklisting orinoco & orinoco_pci when a prism25 card is found? Furthermore (probably not your area), is there anyway to have hostap-utils installed when a prism25 card is discovered during OS install? Thanks Jay -- To UNSUBSCRIBE, email to [EMAIL PROTECTED]

Bug#414782: xserver-xorg-core: Reopen BUG #414782 [FIXED xorg-server 2:1.2.99.902-1]: Unable to load "xf86ExecX86int10"

Package: xserver-xorg-core Version: 2:1.1.1-21 Followup-For: Bug #414782 Upon doing an Apt-get dist-upgrade of Etch and updating Nvidia Drivers Xorg will load but will not show any screen. (WW) NVIDIA(0): Unable to load "xf86ExecX86int10". (EE) NVIDIA(0): Unable to initialize the X Int10 modul

Bug#419966: ITP: libclass-std-perl -- Perl module for creating standard "inside-out" classes

Package: wnpp Severity: wishlist Owner: Ivan Kohler <[EMAIL PROTECTED]> * Package name: libclass-std-perl Version : 0.0.8 Upstream Author : Damian Conway <[EMAIL PROTECTED]> * URL : http://search.cpan.org/dist/Class-Std/ * License : same as Perl itself Program

Bug#419968: ITP: libconfig-std-perl -- Perl module to load and save configuration files in a standard format

Package: wnpp Severity: wishlist Owner: Ivan Kohler <[EMAIL PROTECTED]> * Package name: libconfig-std-perl Version : 0.0.4 Upstream Author : Damian Conway <[EMAIL PROTECTED]> * URL : http://search.cpan.org/dist/Config-Std/ * License : same as Perl itself Progr

Bug#419964: postr: Overwrites IPTC title data

Package: postr Version: 0.5-2 Severity: wishlist Hi, First, thanks for writing postr. I've noticed that if I use another tool to set the IPTC 'headline', when postr uploads the picture it re-titles it to the filename. Postr doesn't seem to pick up the comment or tag information from the IPTC da

Bug#419967: creates unusable menu item

Package: ksim Version: 4:3.5.5-3 Severity: important ksim creates a menu item in System due to /usr/share/applications/kde/ksim.desktop This is due to 16_ksim_desktop_not_hidden.diff which sets Hidden to false. This was inspired by a commit by jriddell upstream, but the Debian patch misses http://

Bug#419965: postgresql-8.1-slony1: slony1 missing dependences

Package: postgresql-8.1-slony1 Severity: serious Justification: no longer builds from source Hi, slony1 is missing the dependency on postgresql-8.1 to be able to build, the configure show that when the server is not installed : configure: error: /usr/lib/postgresql/8.1/lib/plpgsql.so|sl|dll is n

Bug#418385: Seemingly infinite loop and huge memory use when resolving some deps

On Mon, Apr 16, 2007 at 10:02:08AM +0200, Loïc Minier <[EMAIL PROTECTED]> was heard to say: [snip: changing BrokenScore makes things worse] OK, I knew there was a reason for its current value :). Probably when you drop BrokenScore to 0, aptitude wastes time trying all the permutations of "r

Bug#419501: aptitude: Strange conflict resolution

On Mon, Apr 16, 2007 at 09:54:24AM +0200, Christoph Pleger <[EMAIL PROTECTED]> was heard to say: > Hello, > > I had a machine with almost a minimal set of packages installed, one of > those packages was exim4 which had been installed automatically because > of dependencies of another package. The

Bug#419324: Linuxdoc-Tools text output contains overstrikes and escape sequences

On Wed, Apr 18, 2007 at 01:07:11PM +0200, Agustin Martin wrote: > Reading a bit more, I think we have two possibilities, both abandoning > the grotty new default behavior of using escape sequences rather than > overtrikes for emphasis: > > 1) Revert to the original behavior (overstrikes). This sho

Bug#419963: ilohamail: Open attachment gives mktime() error in iil_StrToTime()

Package: ilohamail Version: 0.8.14-0rc3sid3.1 Severity: important When opening an attachment (jpg) I got the following error: Warning: mktime() expects parameter 5 to be long, string given in /usr/share/IlohaMail/include/imap.inc on line 425 Not seen this problem with other attachments, more

Bug#404856: opensync: new upstream version available

On Wed, 2007-04-18 at 13:46 +0200, Marcus Better wrote: > > I don't see much reason for us to provide an automated upgrade, if > upstream > didn't care to do it. Based on the state of the software in v0.19, > and > especially the frontends, I would think not many people use it > seriously > any

Bug#250311: this bug/#250311: ssh: pubkey auth fails between 3.8.1p1-3 and 3.4(woody)

Justin Pryzby <[EMAIL PROTECTED]> wrote: > http://bugs.debian.org/250311 > ssh: pubkey auth fails between 3.8.1p1-3 and 3.4(woody) > > Please see the above URL; Shawn commented on the bug, but the bug number > (still) doesn't reach the submitter by default. Is this problem solved? I honestly do

Bug#419962: non-free OpenGL logo included

Package: kdebase-data Version: 4:3.5.5a.dfsg.1-6 Severity: serious http://opengl.org/about/logos/ makes it clear that OpenGL's logo is not freely modifiable, thus not DFSG-free. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#419961: ITP: phplist -- a web-based newsletter manager

Package: wnpp Severity: wishlist phplist is a newsletter mass mailer program. It has many features, such as RSS feed support, click tracking, view/open statistics, HTML email support, a WYSIWYG HTML editor and much more. It requires apache, php and mysql. It is licensed under the gpl version 2 (or

Bug#419960: `xset dpms force ???' has no effect

Package: xserver-xorg-video-vesa Version: 1:1.3.0-1 When I run `xset dpms force ???', where ??? is standby, suspend, off, or on, nothing happens. Here's the lines from /var/log/Xorg.0.log that contain "DPMS": > (II) Loading extension DPMS > (II) VESA(0): No DPMS capabilities specified; RGB/Col

Bug#419957: Oops, I forgot the translation

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Oops, I forgot that I should actually attach the translation. Now it's attached. Regards, - -- André Luís Lopes [EMAIL PROTECTED],debian}.org http://www.andrelop.org/blog/ Public GPG KeyID : 9D1B82F6 -BEGIN PGP SIGNATURE- Version: GnuPG

Bug#419955: Translation using UTF-8 attached

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, Sorry, I forgot to convert the translation to UTF-8. The new attached file is correclty convreted to UTF-8. Please, use this one instead. Regards, - -- André Luís Lopes [EMAIL PROTECTED],debian}.org http://www.andrelop.org/blog/ Public GP

Bug#419958: /etc/init.d/libdevmapper1.02.1: multiple init scripts which all load the same modules.

Package: libdevmapper1.02.1 Version: 2:1.02.18-1 Severity: normal File: /etc/init.d/libdevmapper1.02.1 Atm I have /etc/init.d/libdevmapper1.02 and /etc/init.d/ libdevmapper1.02.1 The first one is installed as depedency of e2fsprogs and mount, the second as depedency of cryptsetup, which I use occ

Bug#419959: openssl: [INTL:pt_BR] Please consider updating the Brazilian Portuguese (pt_BR) translation

Package: openssl Version: 0.9.8e-4 Severity: wishlist Tags: patch l10n Hello, As requested by Christian Perrier <[EMAIL PROTECTED]>, attached you'll find an updated Brazilian Portuguese (pt_BR) debconf template translation for Debian's openssl package. Please consider using the attached translat

Bug#419957: fontconfig: [INTL:pt_BR] Please consider updating the Brazilian Portuguese (pt_BR) debconf translation

Package: fontconfig Version: 2.4.2-1.2 Severity: wishlist Tags: patch l10n Hello, As requested by Christian Perrier <[EMAIL PROTECTED]>, attached you'll find an updated Brazilian Portuguese (pt_BR) debconf template translation for Debian's fontconfig package. Please consider using the attached t

Bug#415667: ksudoku FTBFS also in powerpc and sparc autobuilders

It would appear that the FTBFS is triggered by some difference in the s390, powerpc and sparc autobuilders, respect to the rest. -- Rodrigo Gallardo GPG-Fingerprint: 7C81 E60C 442E 8FBC D975 2F49 0199 8318 ADC9 BC28 signature.asc Description: Digital signature

Bug#419812: installation-reports

Hi FJP, It's good to hear from you. The Debian download page asks users to fill out an installation report even when the installation goes well. (And I think this installation went very well--I'm actually very happy with the overall experience) so I was just trying to follow through with that. Oth

Bug#419955: tcp-wrappers: [INTL:pt_BR] Please consider updating the Brazilian Portuguese (pt_BR) translation

Package: tcp-wrappers Version: 7.6.dbs-13 Severity: wishlist Tags: patch l10n Hello, As requested by Christian Perrier <[EMAIL PROTECTED]>, attached you'll find an updated Brazilian Portuguese (pt_BR) debconf template translation for Debian's tcp-wrappers package. Please consider using the atta

Bug#419890: include aoTuV patch

forwarded 419890 https://trac.xiph.org/ticket/1166 quit -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#419072: 419072 appears to be caused by missing build-depends on libtool (but there's more errors lurking)

On Wed, Apr 18, 2007 at 07:15:30PM -0500, wrote: > I'm currently testing a build with such build dependency added, I'll > post the (rather minimal) patch if it works. Well. If fixes the posted error, and allows the build to continue to another error. I know absolutely nothing about mono, so I can

Bug#332602: Patch for #332602

tag 332602 patch tag 416609 patch thanks Both bugs are in fact the same. --- diff -r a80dd48e23c3 debian/changelog --- a/debian/changelog Wed Apr 18 19:18:42 2007 -0500 +++ b/debian/changelog Wed Apr 18 19:29:27 2007 -0500 @@

Bug#280262: patch for 280262 seems to be applied already

# A FTBFS in amd64 is RC, now that it is a released arch. severity 280262 grave thanks Apparently this patch is already included in the current version. Please someone with the adecuate HW test if the FTBFS still exists. -- Rodrigo Gallardo GPG-Fingerprint: 7C81 E60C 442E 8FBC D975 2F49 0199 83

Bug#419695: Problem with VLANs

On Wed, Apr 18, 2007 at 01:11:16PM +0200, Gregory Colpart wrote: > > My modem is connected over a VLAN-Switch to the device eth0.10 > > > > pppoeconf detects the modem but generates the config-files using eth0 > > instead of eth0.10 > > [...] > > Thanks for your report. > I prepare a patch and u

Bug#419954: New upstream version available

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Package: icedove Version: 1.5.0.10.dfsg1-3 Severity: wishlist - --- Please enter the report below this line. --- Upstream has released 2.0 on 2007-04-18. - --- System information. --- Architecture: i386 Kernel: Linux 2.6.20.7-slh-smp-1 Debian

Bug#419072: 419072 appears to be caused by missing build-depends on libtool

I'm currently testing a build with such build dependency added, I'll post the (rather minimal) patch if it works. -- Rodrigo Gallardo GPG-Fingerprint: 7C81 E60C 442E 8FBC D975 2F49 0199 8318 ADC9 BC28 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Cont

Bug#419899: Please add a Planet Debian default feed

Le mercredi 18 avril 2007 12:43, Ana Guerrero a écrit : > On Wed, Apr 18, 2007 at 11:36:03AM -0400, Filipus Klutiero wrote: > > Package: akregator > > Version: 4:3.5.5.dfsg.1-6 > > Severity: wishlist > > > > Please add Planet Debian to the default feeds. > > Sound like a nice idea. Could you make a

Bug#419953: Borked tarball for native C package

Package: cvs-buildpackage Version: 5.20 Severity: important I prepared deb-gview 0.1.0 for upload today and as well as using debuild and pdebuild, I used the following command to cvs-buildpackage: cvs-buildpackage -M dpkg-view -H ./autogen.sh It was this tarball and .dsc that I uploaded. The re

Bug#419952: Missing contents in perl.conf file prevents immediate functionality after enabling of mod in apache

Package: libapache2-mod-perl2 Version: 2.0.2-2.3 This has been reported in the ubuntu bugtracker: https://bugs.launchpad.net/ubuntu/+source/libapache2-mod-perl2/+bug/55464 after installing mod-perl, it dosen't work, and it's very difficult to find documentation on how to make it work .. The co

Bug#414287: udev: renames eth5 to eth5_rename_ren

reassign 414287 linux-2.6 thanks On Apr 18, Martin Wuertele <[EMAIL PROTECTED]> wrote: > They only have the same MAC when using udev. That issue is not present > on Solaris or when using a module less kernel and purging udev. I do not believe this. Anyway, udev uses the values provided by the ker

Bug#419261: What about creating a new section 'ruby' ?

Hello, I want to second this proposal. There were several discussions to request this already back in 2004, but we never came around to actually filing the request. Since then, Ruby-in-Debian has grown a lot, with as shining example the Debian/Ruby Extras team which contributes over 150 pkgs to

Bug#419951: ITP: jexcelapi -- Java API to read, write and modify Excel spreadsheets

Package: wnpp Severity: wishlist Owner: Torsten Werner <[EMAIL PROTECTED]> * Package name: jexcelapi Version : 2.6.3 Upstream Author : Andy Khan * URL : http://www.jexcelapi.org/ * License : LGPL Programming Lang: Java Description : Java API to read, wri

Bug#419795: libperl6-export-perl: doesn't depend on libfilter-simpler-perl

gregor herrmann wrote: > On Wed, 18 Apr 2007 09:56:30 +1000, Geoff Crompton wrote: > >> For sarge I did a private backport of libperl6-export-perl, and my changelog >> notes that I added a libfilter-simpler-perl dependancy, as >> http://search.cpan.org/~dconway/Perl6-Export-0.07/Export.pm lists it

Bug#419950: NETDEV WATCHDOG, tulip, 2.6.18

Package: linux-kernel Version: 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (Submitted to [EMAIL PROTECTED] && [EMAIL PROTECTED]) I also have recurrent problems with NETDEV WATCHDOG: eth0: transmit timed out I am running on a Pentium 3 with a Linksys LNE100TX V5.1 PCI ethernet card, which also identi

Bug#358637: PIC libraries are not mandatory under policy

severity 419684 important severity 358637 important thanks > These two bugs cause a FTBFS of the upcoming collectd package, thus I'm > raising the severity. A shared library should be an appropriate solution in > my case as well as building using -fPIC. It is not mandatory for library packages to

Bug#419949: apache2: put status in argv?

Package: apache2 Severity: wishlist Something which I'd find very useful would be an option in the config file which would cause each apache process to put its current status into argv, just like sendmail does. This status would be something along the lines of "idle" or the URL of the request it'

Bug#418866: arbortext-catalog: java classes are not built from sources

severity 418866 important thanks Hmm, at a glance this doesn't look 'serious' to me. The package is in contrib, and the source appears to be included even if not used in the build, so why should this be an RC bug? -- Steve Langasek Give me a lever long enough and a Free OS Deb

Bug#419948: munin: stark cpu increase sarge->etch

Package: munin Severity: normal updating a stable server from sarge to etch, the amount of CPU munin uses presumably for graphing has increased 4- or 5-fold. Please see attached graph (I nice'd the cronjob, all other services run with normal priority). While we all know that new software always n

Bug#419947: [newt] Characters in titlebar are sometimes unbalanced

Package: cdebconf-newt-udeb Version: 0.115 Severity: minor Tags: patch The attached patch makes sure characters surrounding the title are always even (see also #416543). I've tested it mainly on show_select_window() using the ad-hoc config/template files attached which create a title of the form

Bug#419920: gtk-qt-engine: Gtk application(s) not accessing .gtkrc-2.0-kde

Bastian Venthur wrote: > David Liontooth schrieb: > >> Bastian Venthur wrote: >> >>> Hi, >>> >>> I don't see where the problem is. Is the gnome-system-monitor not themed >>> correctly when run under KDE? The reason the file is named >>> .gtkrc-2.0-kde is that it is only sourced by KDE, so G

Bug#419946: mutt gets confused when a message dissapears from a maildir

Package: mutt Version: 1.5.13-3 Severity: normal I use offlineimap to keep multiple computers in sync with a remote imap server. If offline imap deletes a file from a new directory in a Maildir that mutt is currently viewing, mutt gets an error trying to move the file from new to cur when running

Bug#419945: mediawiki1.7: [INTL:es] Spanish translation update

Package: mediawiki1.7 Version: N/A; reported 20070419 Priority: wishlist Tags: l10n patch Please use the attached PO file to update mediawiki1.7's translation (as requested by Christian) Please notice I've marked in the PO file several msgids that need REVIEW since I belive they need to be fixed

Bug#419943: linux-2.6: CONFIG_PARAVIRT breaks some external modules

maximilian attems <[EMAIL PROTECTED]> writes: > kvm is a too interesting tech to be disabled, > checkout buildserver trunk builds to see if it is solved in 2.6.21-rcX > -> wiki.debian.org/DebianKernel The same problem is still present in those builds. Given the invasiveness of what PARAVIRT does

Bug#419943: linux-2.6: CONFIG_PARAVIRT breaks some external modules

maximilian attems <[EMAIL PROTECTED]> writes: > kvm is a too interesting tech to be disabled, > checkout buildserver trunk builds to see if it is solved in 2.6.21-rcX > -> wiki.debian.org/DebianKernel Okay, we'll check. Thanks. -- Russ Allbery ([EMAIL PROTECTED])

Bug#301972: this bug/#301972: coreutils: date return 2005-03-01 for --date "last month"

On Wed, Apr 18, 2007 at 03:53:10PM -0600, Bob Proulx wrote: > Justin Pryzby wrote: > > coreutils: date return 2005-03-01 for --date "last month" > > http://bugs.debian.org/301972 > > > > The quoted manual says that -1 month might actually lie in the current > > month. It doesn't say that date can

Bug#419829: mnogosearch: [debconf_rewrite] Debconf templates review

On 4/18/07, Christian Perrier <[EMAIL PROTECTED]> wrote: Would you mind sending me (to the BR is enough, I'm subscribed to the PTS) the new template? It is attached. About translating or not "blob", we can leave this to translators, don't worry...so I suggest keeping the underscores before "C

Bug#419928: mirror submission for ftp.grokthis.net

Hello Eric, Thanks for your submission. Some details have to be fixed before we can include your mirror in the list. On Wed, Apr 18, 2007 at 08:00:10PM +, Eric Windisch wrote: > Package: mirrors > Site: ftp.grokthis.net Then ftp://ftp.grokthis.net/mirrors/debian/project/trace/localhost.loc

Bug#419943: linux-2.6: CONFIG_PARAVIRT breaks some external modules

On Wed, Apr 18, 2007 at 02:47:17PM -0700, Russ Allbery wrote: > > The 2.6.20 kernels in unstable for 686 and k7 have CONFIG_PARAVIRT enabled. > This apparently redefines various operations widely used by kernel modules > (or included via inlined functions) to redirect through a paravirts_ops > tab

Bug#301972: this bug/#301972: coreutils: date return 2005-03-01 for --date "last month"

Justin Pryzby wrote: > coreutils: date return 2005-03-01 for --date "last month" > http://bugs.debian.org/301972 > > The quoted manual says that -1 month might actually lie in the current > month. It doesn't say that date can't subtract one from the current > month to give the first day of the pr

Bug#419280: kernel: hdc: DMA disabled <- after burning, when media is ejected for verify

forwarded 419280 http://bugs.kde.org/show_bug.cgi?id=144404 thanks Hi Michael, Thanks for all the extra testing! I have forwarded your bug to the K3b developer. If you'd like to follow the discussion directly (maybe he'll have more ideas about what you could do to help narrow the problem down)

Bug#419943: linux-2.6: CONFIG_PARAVIRT breaks some external modules

Package: linux-2.6 Version: 2.6.20-2 Severity: important The 2.6.20 kernels in unstable for 686 and k7 have CONFIG_PARAVIRT enabled. This apparently redefines various operations widely used by kernel modules (or included via inlined functions) to redirect through a paravirts_ops table, but the par

Bug#419942: pitivi: Error in _init_gobject_gtk_gst

Package: pitivi Version: 0.10.1-2 Severity: grave Justification: renders package unusable Hi, I decided to give pitivi a try tonight, and it resulted in: % pitivi Traceback (most recent call last): File "/usr/bin/pitivi", line 85, in ? _init_gobject_gtk_gst() File "/usr/bin/pitivi", line

Bug#415634: "Blocked" by #401861

FWIW, I've already filed a report for a package dealing with KDE extragear; see #401861. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#396674: charts missing - plot type list empty

Had the same problem. Switching on the necessary plugins fixed the problem. Maybe some plugins should be switched on by default, in order to prevent users from confusion? Kind regards, Anton Verburg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contac

Bug#419941: upgrade-reports: Desktop sharing over webex does not display the remote Desktop

Package: upgrade-reports Severity: normal Since the last software update on my debian System I am no longer able to view a shared dektop over Webex. I suspect that one of the upgrade software packages leads to this error. the following packages have been upgraded on Mon Apr 16 07:49:22 2007 U

Bug#419940: procmail: wrong behaviour on unfolding headers (extra LWSP-char)

Package: procmail Version: 3.22-16 Severity: normal hi, I was puzzled by some RE failure on a constant part of msgs sent by a script. Eg. the recipe has the following RE * ^Subject: .+ word1 word2 of course I'm sure sent msgs always have subject ending with 'word1 word2' - that's wired into the

Bug#419482: Kernel 2.6.18 - ALI15X3 driver too optmistic about UDMA

On Sun, Apr 15, 2007 at 06:26:35PM -0700, Martin Michlmayr wrote: >* Steve McIntyre <[EMAIL PROTECTED]> [2007-04-16 00:29]: >> On the "cats" machines that we use for arm buildd work, it seems the >> kernel is too aggressive in enabling UDMA support for the onboard IDE >> chip: >> ALi Corporation

Bug#419939: libhtml-tree-perl: change in behaviour makes libxml-twig-perl test fail

Package: libhtml-tree-perl Version: 3.23-1 The attached file foo.tar.gz contains a small program "foo.pl". When I install libhtml-tree-perl 3.19.01-2 and run "foo.pl", then the result is: été When I install libhtml-tree-perl 3.23-1 and run "foo.pl", then the result is: été This change i

Bug#419931: libauthen-passphrase-perl: depends on unavailable libcrypt-unixcrypt-xs-perl

On Wed, Apr 18, 2007 at 04:36:46PM -0400, Aaron M. Ucko wrote: > Package: libauthen-passphrase-perl > Version: 0.005-1 > Severity: grave > Justification: renders package unusable (uninstallable) > > libauthen-passphrase-perl is impossible to install because it depends > on libcrypt-unixcrypt-xs-pe

Bug#399150: torrentflux: Should only suggest, not depend. HowTo avalible.

On 4/18/07, Mike Mestnik <[EMAIL PROTECTED]> wrote: I do love to finish installing a pkg only to find it's ready to be used. I understand the current dependency on php4/5-mysql is required for this to function, but then I see that you are missing dependences for this goal. dbconfig-common blows

Bug#395305: /etc/init.d/xendomains parseln() and long domU names

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 This tripped me up recently too, but i found i needed a different patch: 0 aesop:~# diff -u /etc/init.d/xendomains{.orig,} - --- /etc/init.d/xendomains.orig 2007-04-18 12:04:04.0 -0400 +++ /etc/init.d/xendomains 2007-04-18 13:00:28.

Bug#393832: Bug#419570: webcalendar: Package dependencies must allow php5 instead of php4

* Stephen Gran <[EMAIL PROTECTED]> [2007-04-18 11:14]: > This one time, at band camp, Rafael Laboissiere said: > > Is this feature under development? It would be great to be able to specify > > dependencies like the following (note the parentheses): > > I know people have talked about the proble

Bug#419762: [Debian-ia32-libs] Bug#419762: ia32-libs: Please add sdl libraries

sdlmame (the asm included by default as long as its a 32bit build) or advancemame (--enable-asm and --enable-asm-mips3 and --enable-sdl to configure). (The mame in Debian is xmame which is unmaintained and advancemame is based on xmame so it seems). I was intending to try to get advancemame / ad

Bug#401267: Yet another upstream version

There's a new upstream version, 1.1rc8. There's an important, at least for me, bugfix between 1.1rc4 y 1.1rc8 and that is that the old one doesn't calculate the length of a packet that is triggering authentication, making it virtually impossible to do testing against a server that requires authe

Bug#419848: how to copy files containing space?

On Wed, Apr 18, 2007 at 10:20:08AM -0500, Greg Norris wrote: > You probably just need to double up the quotes the name, so that the > remote shell sees them. Something like: > >scp '"leghorn:/mnt/rdbackup/home/sachin/Daily report April -07.ods"' . Actually, that should've been: scp legh

Bug#419930: listarchives: posting frequency units Posts/h inappropriate (frequency==0)

tags 419930 wontfix thanks On Wednesday 18 April 2007 22:36, Nicola Manini wrote: > I suggest therefore we plot Postings/(2 weeks), and add a bi-weekly > point to the graph. > Alternatively, a monthly average could do. Although you are undoubtedly completely correct, the statistics are really no

Bug#418840: patch for NMU

I'm going to do an NMU for this bug with the attached patch. -- Eugeniy Meshcheryakov diff -urpN locales.orig/debian/changelog belocs-locales-bin-2.4/debian/changelog --- locales.orig/debian/changelog 2007-04-18 22:57:48.0 +0200 +++ belocs-locales-bin-2.4/debian/changelog 2007-04-18 22:46

Bug#419937: cupsys: Brother USB printer will only print once

Package: cupsys Version: 1.2.7-4 Severity: important Tags: patch I have a Brother HL-1430 printer (USB) configured with KDE control center to print with CUPS. But everytime I do a print job the next jobs will not be printed (it may be more than one page, it's the job which counts). The next jo

Bug#419935: avahi-daemon: getent hosts work only root

Package: avahi-daemon Version: 0.6.16-3etch1 Severity: important It seems at avahi-daemon /var/run/avahi-daemon directory permissions are too restrictive 0700. So normal user can't solve addresees via getent hosts host.local because he/she can't connect socket. Example kongueror show services,

Bug#419936: glotski: minimums are not minimal

Package: glotski Version: 0.2-4 Severity: normal In 3 of the levels that come with glotski, the displayed minimum number of moves is wrong. See http://www.clss.net/~pacman/glotsol/ for my improved solutions and the brute-force search program I used to find them (giving me confidence that they are

Bug#419138: mairix segfaults on PowerPC

On 2007-04-18 22:47:53 +0200, Vincent Lefevre wrote: > Here is it (maildir mailbox in attachment, in .tar.bz2 form). And on this mailbox, I can also reproduce the bug on x86. -- Vincent Lefèvre <[EMAIL PROTECTED]> - Web: 100% accessible validated (X)HTML - Blog:

Bug#399150: torrentflux: Should only suggest, not depend. HowTo avalible.

On Wed, Apr 18, 2007 at 01:13:02PM -0700, Cameron Dale wrote: > On 4/18/07, Mike Mestnik <[EMAIL PROTECTED]> wrote: > >Package: torrentflux > >Followup-For: Bug #399150 > > > >I'm trying to use sqlite as the DB, as it's better(smaller). > > > >http://www.torrentflux.com/forum/index.php?topic=697.ms

  1   2   3   4   >