[Bug 305544] Re: 8.10 non-lan wired network speed slow
** Description changed: Hi, Architecture: amd64 DistroRelease: Ubuntu 8.10 I've installed two new Dell entry level servers in two separate sites, and local LAN speed is fine. As soon I go to the Internet (e.g. apt-get update, or http download), the speed is disasterously slow (abandoned apt-get update after 24 hours!). Other machines (e.g. running 7.10) on the same segment, there is no problem. Checked, proxies (none) netmask, routing, tracroutes are fine. SSH transfers are mostly fine, but sometimes stall in one direction. ifconfig shows no errors. Speed is 100 FDX on the card. I suspected a LAN card issues (hw or driver): Nov 27 10:10:17 server3 kernel: [2.555704] eth0: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:68:9b:4e:e9 Nov 27 10:10:17 server3 kernel: [2.555706] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] Nov 27 10:10:17 server3 kernel: [2.555708] eth0: dma_rwctrl[7618] dma_mask[64-bit] iperf tests on the LAN show 10MB locally, and also 40KB via DSL (fine). Why does it seem to be limited to http? But after buying and testing another LAN card (Linksys), the same behaviour. Which leads me to believe I've stumbled across a Ubuntu bug, but in what package? I'm confused.. See attached infos. + + uname -a + Linux server3 2.6.27-7-server #1 SMP Fri Oct 24 07:20:47 UTC 2008 x86_64 GNU/Linux -- 8.10 non-lan wired network speed slow https://bugs.launchpad.net/bugs/305544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305544] Re: 8.10 non-lan wired network speed slow
** Attachment added: "ifconfig, lspci, /proc/interrupts" http://launchpadlibrarian.net/20235782/ubuntu8.10_net1.txt ** Description changed: Hi, Architecture: amd64 DistroRelease: Ubuntu 8.10 I've installed two new Dell entry level servers in two separate sites, and local LAN speed is fine. As soon I go to the Internet (e.g. apt-get update, or http download), the speed is disasterously slow (abandoned apt-get update after 24 hours!). Other machines (e.g. running 7.10) on the same segment, there is no problem. Checked, proxies (none) netmask, routing, tracroutes are fine. SSH transfers are mostly fine, but sometimes stall in one direction. ifconfig shows no errors. Speed is 100 FDX on the card. I suspected a LAN card issues (hw or driver): Nov 27 10:10:17 server3 kernel: [2.555704] eth0: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:68:9b:4e:e9 Nov 27 10:10:17 server3 kernel: [2.555706] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] Nov 27 10:10:17 server3 kernel: [2.555708] eth0: dma_rwctrl[7618] dma_mask[64-bit] - But after buying and testing another Linksys card, the same behaviour. + iperf tests on the LAN show 10MB locally, and also 40KB via DSL (fine). + Why does it seem to be limited to http? + + But after buying and testing another LAN card (Linksys), the same behaviour. Which leads me to believe I've stumbled across a Ubuntu bug, but in what package? I'm confused.. See attached infos. -- 8.10 non-lan wired network speed slow https://bugs.launchpad.net/bugs/305544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305544] [NEW] 8.10 non-lan wired network speed slow
Public bug reported: Hi, Architecture: amd64 DistroRelease: Ubuntu 8.10 I've installed two new Dell entry level servers in two separate sites, and local LAN speed is fine. As soon I go to the Internet (e.g. apt-get update, or http download), the speed is disasterously slow (abandoned apt-get update after 24 hours!). Other machines (e.g. running 7.10) on the same segment, there is no problem. Checked, proxies (none) netmask, routing, tracroutes are fine. SSH transfers are mostly fine, but sometimes stall in one direction. ifconfig shows no errors. Speed is 100 FDX on the card. I suspected a LAN card issues (hw or driver): Nov 27 10:10:17 server3 kernel: [2.555704] eth0: Tigon3 [partno(BCM95722) rev a200 PHY(5722/5756)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:68:9b:4e:e9 Nov 27 10:10:17 server3 kernel: [2.555706] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] Nov 27 10:10:17 server3 kernel: [2.555708] eth0: dma_rwctrl[7618] dma_mask[64-bit] iperf tests on the LAN show 10MB locally, and also 40KB via DSL (fine). Why does it seem to be limited to http? But after buying and testing another LAN card (Linksys), the same behaviour. Which leads me to believe I've stumbled across a Ubuntu bug, but in what package? I'm confused.. See attached infos. uname -a Linux server3 2.6.27-7-server #1 SMP Fri Oct 24 07:20:47 UTC 2008 x86_64 GNU/Linux ** Affects: ubuntu Importance: Undecided Status: New -- 8.10 non-lan wired network speed slow https://bugs.launchpad.net/bugs/305544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246800] Re: no sound on intrepid
Updated to the latest: ~$ uname -a Linux opwv-shorgan 2.6.27-9-generic #1 SMP Thu Nov 20 21:57:00 UTC 2008 i686 GNU/Linux Using ALSA for sound. Un-muted PCM and turned it up. Sound works. -- no sound on intrepid https://bugs.launchpad.net/bugs/246800 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
After upgrading to intrepid, I'm no longer seeing this issue. It seems this was a hardy-only bug. The method for triggering the bug is dependent on the images. Some images take under a second to scale, some take closer to a minute. Basically: create a directory create a bunch of subdirectories put a bunch of images in all of those subdirectories (this step might be optional) set the custom icon for each subdirectory as one of the images in that directory navigate into one of the subdirectories navigate back up to the parent directory (this is the step that causes the hang) I think Laurent also described it fairly well. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 320893] Re: [i915GM] Regression in xserver-xorg-video-intel version 2.4.1-1ubuntu10.3
I also had this problem on my LG-LT20 laptop which also runs in 1024x768. Rolling back to 10 'solved' the issue for me also. 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) Which I presume means I have a i855GM card. please let me know if there is anything I can do to help. -- [i915GM] Regression in xserver-xorg-video-intel version 2.4.1-1ubuntu10.3 https://bugs.launchpad.net/bugs/320893 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 322706] [NEW] Gedit freezes if working directory has too many files
Public bug reported: Binary package hint: gedit I am using gedit to write / debug a numerical code in C on Ubuntu 8.04. The code generates a lot of data in a large number of output files. In a recent run, 9000 files were generated in the "output" directory. If I set "output" as the working directory in Gedit, it freezes (the screen greys out and one of my processors hits 100%). I am using the "file browser pane" plugin. I think this may be causing the problem by loading a list of files in the directory. The problem persists even with the browser sidepane closed. Is there any way to make the browser plugin more efficient? Nautilus seems to handle the task much more efficiently. ** Affects: gedit (Ubuntu) Importance: Medium Assignee: Ubuntu Desktop Bugs (desktop-bugs) Status: Incomplete -- Gedit freezes if working directory has too many files https://bugs.launchpad.net/bugs/322706 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 345627] Re: Crackling / scratching noise using Pulseaudio
Not sure if this is the same problem, but I'm having audio playback problems on my ForteMedia FM801-AU - sound in all applications suffers from occasional "hiccups". However, the most severe problem is that flash video seems to get stuck in "fast forward" after some time (playback of both audio and video is very fast and extremely choppy). Updating linux-image-generic to 2.6.28.12.16 in jaunty-proposed made the problem less severe (the system played a number of flash videos flawlessly, but then eventually suffered from the same fast-forward problem). Is this the same problem? Were there other packages that needed to be updated (other than linux-image) to fix the problem? Sean -- Crackling / scratching noise using Pulseaudio https://bugs.launchpad.net/bugs/345627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 353936] Re: Upgrade Maven2 to version 2.2.0
+1 vote -- Upgrade Maven2 to version 2.2.0 https://bugs.launchpad.net/bugs/353936 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 345627] Re: Crackling / scratching noise using Pulseaudio
Though I may be mistaken, don't the changes made by Stefan Bader in the recent kernel revision undo the fix? If so, doesn't that mean that status should still be Triaged, not Fix Released? -- Crackling / scratching noise using Pulseaudio https://bugs.launchpad.net/bugs/345627 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 260832] Re: [needs-packaging] BRL-CAD - CAD cross platfrom OS 3D solid modeling
Is there any remaining actions that need to be taken to finish the packaging integration of BRL-CAD into apt? Cheers! Sean -- [needs-packaging] BRL-CAD - CAD cross platfrom OS 3D solid modeling https://bugs.launchpad.net/bugs/260832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246800] Re: no sound on intrepid
I'm still not getting sound, even with the latest updates. I tried your quick fix Everthon (thanks!) but it didn't work. ~$ uname -a Linux opwv-shorgan 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686 GNU/Linux $ lspci | grep Audio 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) $ asoundconf list Names of available sound cards: ICH6 $ aplay -l List of PLAYBACK Hardware Devices card 0: ICH6 [Intel ICH6], device 0: Intel ICH [Intel ICH6] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ICH6 [Intel ICH6], device 4: Intel ICH - IEC958 [Intel ICH6 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 -- no sound on intrepid https://bugs.launchpad.net/bugs/246800 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246800] Re: no sound on intrepid
I have the same problem with the Intrepid Beta I installed this week. Worked just fine with Hardy. My system * IBM X41 * 2.6.27-7-generic #1 SMP Tue Oct 14 18:40:44 UTC 2008 i686 GNU/Linux I'm about to install today's update and I'll post back if anything changed. -- no sound on intrepid https://bugs.launchpad.net/bugs/246800 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 246800] Re: no sound on intrepid
No change, audio still just that system beep: * 2.6.27-7-generic #1 SMP Fri Oct 17 22:24:21 UTC 2008 i686 GNU/Linux -- Sean -- no sound on intrepid https://bugs.launchpad.net/bugs/246800 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 292754] [NEW] updates in shockwave flash player gone
Public bug reported: Tuesdays updates came in and my shockwave flash player went out...almost... just leaving the bottom portion of playerin view I need to see what came in so as to perhaps trial and error to get the player back in focus.( I still have audio) .In the updates there was things like gstreamer bad etc.is anyone able to point out how (a). to restore shockwave appl. or (b). to find out what items came in so as to eliminate them one by one in order to find the culprit!? I have Hardy Heron ** Affects: ubuntu Importance: Undecided Status: New -- updates in shockwave flash player gone https://bugs.launchpad.net/bugs/292754 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
Is there anything else I can do to help resolve this? Should I also open a new bug about the certain pictures taking very long to scale? -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
I am also experiencing this bug. Same symtoms, everything. Seems to be related to pictures. It takes about 5 minutes to open a nautilus window with just a few pictures. Uploaded a backtrace with debugging symbols. ** Attachment added: "nautilus backtrace from hang" http://launchpadlibrarian.net/17713570/gdb-nautilus.txt ** Changed in: nautilus (Ubuntu) Status: Invalid => New -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 233862] Re: nautilus image preview can't cope with 400 photos in a folder
*** This bug is a duplicate of bug 223912 *** https://bugs.launchpad.net/bugs/223912 ** This bug has been marked a duplicate of bug 223912 Nautilus freezes when opening some directories -- nautilus image preview can't cope with 400 photos in a folder https://bugs.launchpad.net/bugs/233862 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
opened up the folder that freezes nautilus at 22:42:11. around 22:45:57 is where the window becomes responsive again. ** Attachment added: "strace of misbehaving nautilus" http://launchpadlibrarian.net/17714207/strace-nautilus.log -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
sorry, I think I meant I opened the folder at 22:41:11 or thereabout. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
As far as I can see this happens in every directory that has pictures. Do you have some idea on how to determine if one particular picture is causing the problem? Thank you. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
The hangs are typically 4 - 5 minutes. and it only happens in my pictures directory. I have a directory with about 40 subdirectories with pictures. opening the top pictures directory is quick, but opening any subdirectory takes forever. if I create a new subdirectory and put a picture in it (either from elsewhere that loads quickly or one of the freezing picture subdirectories) it freezes. if I take any of the pictures from one of the pictures subdirectories and put it in a different directory outside of my pictures, it loads quickly. I hope that helps to explain the problem. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
I assume that wouldn't cause a hang. It doesn't appear to be anything
with one of the pictures. Copying my pictures directory to a new
directory alleviates the problem. Another point of interest is that I
have a custom icon for each folder that is a picture container within.
Let me try to list the known conditions:
- Happens when opening any subdirectory of $HOME/My Pictures
- Only happens if that subdirectory contains a picture
- The picture doesn't matter. Pictures that don't cause problems in other
places cause problems in $HOME/My Pictures
- $HOME/My Pictures contains 56 subdirectories, each of them with a custom icon
that is a picture from that subdirectory.
- $HOME/My Pictures does not freeze while loading.
- $HOME/My Pictures is world readable/writeable as are most of the
subdirectories (were copied over from a windows partition)
- If I copy $HOME/My Pictures to $HOME/pictures, the problem (and custom icons)
don't transfer over to $HOME/pictures.
If you look at the strace there appears to be a couple of files that appear
unrelated but moving them out of the way didn't seem to help.
[pid 20274] 22:42:42.034784 open("/home/nicolle/My
Pictures/2008.7/CIMG1528.JPG", O_RDONLY|O_LARGEFILE) = 22
..
[pid 20274] 22:42:42.469348 mmap2(NULL, 26546176, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb1b1e000
[pid 20274] 22:43:53.849976 munmap(0xb1b1e000, 26546176) = 0
That picture is the icon for one of the subdirectories. Actually, all of
the files in the strace are. Perhaps when I open a subdirectory all of
the icons for $HOME/My Pictures are scaled? I'm grasping at straws. If
you have any more ways I can analyze this, please let me know. Thanks
for your patience.
--
Nautilus freezes when opening some directories
https://bugs.launchpad.net/bugs/223912
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
I did a bit more debugging. I don't really get the code. From what I can understand: when I open up My Pictures, it finds the cached versions of the icons for all of the subdirectories. When I open up a subdirectory something causes it to check the icons for all of the subdirectories. For some reason it doesn't find them at this point. This happens in a thread that blocks interaction with the GUI. They're all custom icons, and some of them take 30 seconds to a minute to generate the thumbnails (I just stepped through and verified that's what's happening). That seems a bit extreme. Anyway, after that, that nautilus window will load any of the subdirectories again without problem, until it's closed. Once it's closed and reopened, back to not working. The backtrace helps to explain what's going on probably better than I did. Thanks. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 223912] Re: Nautilus freezes when opening some directories
Nope. .config/user-dirs.dir: XDG_DESKTOP_DIR="$HOME/Desktop" XDG_DOWNLOAD_DIR="$HOME/Desktop" XDG_TEMPLATES_DIR="$HOME/Templates" XDG_PUBLICSHARE_DIR="$HOME/Public" XDG_DOCUMENTS_DIR="$HOME/Documents" XDG_MUSIC_DIR="$HOME/" XDG_PICTURES_DIR="$HOME/" XDG_VIDEOS_DIR="$HOME/Videos" And the bug doesn't happen in $HOME. I don't understand the code well enough to figure out why the icons are being scaled ... it's making 16 pixel icons for something. From the parent directory of the directory I changed to (or the directory I'm changing away from, same thing). I don't see those icons anywhere. Also, it doesn't happen if I run "nautilus My Pictures/2001 Pawnee", while it would happen if I navigated to that directory. It seems that the generating of thumbnails is an unintended side-effect of something. -- Nautilus freezes when opening some directories https://bugs.launchpad.net/bugs/223912 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 173966] Re: java plugin not working in firefox 3 on ubuntu 8.04
I dont quite know what I am to do having sent a bug report regards -- java plugin not working in firefox 3 on ubuntu 8.04 https://bugs.launchpad.net/bugs/173966 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 259058] [NEW] after using "toggle_plplot_use", octave fails to plat anything.
Public bug reported: Binary package hint: octave-plplot I am running Ubuntu 8.04, octave 3.0 and I installed octave-plplot using Synaptic Package Manager. gnuplot works fine as the default plotting tool. At the octave command line I typed the command "toggle_plplot_use" to enable plplot as the plotting package. Some warnings were issued relating to the built-in variable LOADPATH, but plplot was enabled. Now the command "plot(1:10)" should plot a straight line. No plot is displayed. The following errors are shown: error: liblapack.so.3: cannot open shared object file: No such file or directory error: `plplot_octave' undefined near line 3163 column 1 error: called from `plsstrm' error: evaluating if command near line 86, column 3 error: called from `figure' in file `/usr/share/plplot_octave/figure.m' error: evaluating if command near line 19, column 3 error: called from `__pl_init' in file `/usr/share/plplot_octave/support/__pl_init.m' error: evaluating assignment expression near line 21, column 8 error: called from `__plt__' in file `/usr/share/plplot_octave/support/__plt__.m' error: called from `plot' in file `/usr/share/plplot_octave/plot.m' Further details: Ubuntu: Description:Ubuntu 8.04.1 Release:8.04 plplot-octave: Installed: 5.8.0-6 Candidate: 5.8.0-6 Version table: *** 5.8.0-6 0 500 http://ie.archive.ubuntu.com hardy/universe Packages 100 /var/lib/dpkg/status ** Affects: plplot (Ubuntu) Importance: Undecided Status: New -- after using "toggle_plplot_use", octave fails to plat anything. https://bugs.launchpad.net/bugs/259058 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 259058] Re: after using "toggle_plplot_use", octave fails to plat anything.
Yes, this is exactly the output I see when running toggle_plplot_use.m.
I went through the plplot.m file and removed all of the code blocks relating
to LOADPATH. These blocks occurred in the form of
if (built-in LOADPATH exists)
On Mon, Aug 18, 2008 at 3:30 PM, Aanjhan Ranganathan
<[EMAIL PROTECTED]>wrote:
> Thanks for the report and helping us make Ubuntu better. Could be a
> packaging issue and the warnings generated while doing a
> "toggle_plplot_use" could be of importance. Confirming the issue and
> below are the warning verbatim.
>
> octave3.0:2> toggle_plplot_use
> warning: You may want to call
> warning("off","Octave:built-in-variable-assignment");
> to prevent spurious warnings from the plplot code for compatability with
> octave 2.0/2.1.
>
> warning: LOADPATH is no longer a built-in variable; please read the NEWS
> file or type `news' for details
> warning: LOADPATH is no longer a built-in variable; please read the NEWS
> file or type `news' for details
> warning: LOADPATH is no longer a built-in variable; please read the NEWS
> file or type `news' for details
> warning: LOADPATH is no longer a built-in variable; please read the NEWS
> file or type `news' for details
> Use PLplot: on
>
> ** Changed in: plplot (Ubuntu)
> Status: New => Confirmed
>
> --
> after using "toggle_plplot_use", octave fails to plat anything.
> https://bugs.launchpad.net/bugs/259058
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in "plplot" source package in Ubuntu: Confirmed
>
> Bug description:
> Binary package hint: octave-plplot
>
> I am running Ubuntu 8.04, octave 3.0 and I installed octave-plplot using
> Synaptic Package Manager.
> gnuplot works fine as the default plotting tool.
>
> At the octave command line I typed the command "toggle_plplot_use" to
> enable plplot as the plotting package.
> Some warnings were issued relating to the built-in variable LOADPATH, but
> plplot was enabled.
>
> Now the command "plot(1:10)" should plot a straight line. No plot is
> displayed. The following errors are shown:
>
> error: liblapack.so.3: cannot open shared object file: No such file or
> directory
> error: `plplot_octave' undefined near line 3163 column 1
> error: called from `plsstrm'
> error: evaluating if command near line 86, column 3
> error: called from `figure' in file `/usr/share/plplot_octave/figure.m'
> error: evaluating if command near line 19, column 3
> error: called from `__pl_init' in file
> `/usr/share/plplot_octave/support/__pl_init.m'
> error: evaluating assignment expression near line 21, column 8
> error: called from `__plt__' in file
> `/usr/share/plplot_octave/support/__plt__.m'
> error: called from `plot' in file `/usr/share/plplot_octave/plot.m'
>
>
> Further details:
> Ubuntu:
> Description:Ubuntu 8.04.1
> Release:8.04
>
> plplot-octave:
> Installed: 5.8.0-6
> Candidate: 5.8.0-6
> Version table:
> *** 5.8.0-6 0
>500 http://ie.archive.ubuntu.com hardy/universe Packages
>100 /var/lib/dpkg/status
>
--
after using "toggle_plplot_use", octave fails to plat anything.
https://bugs.launchpad.net/bugs/259058
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 259058] Re: after using "toggle_plplot_use", octave fails to plat anything.
Apologies for the previous message cut short...
After I removed the code blocks referring to LOADPATH in
toggle_plplot_use.m, the warnings obviously stopped, but the plotting errors
were identical.
On Mon, Aug 18, 2008 at 5:09 PM, Sean Delaney <[EMAIL PROTECTED]>wrote:
> Yes, this is exactly the output I see when running toggle_plplot_use.m.
>
> I went through the plplot.m file and removed all of the code blocks
> relating to LOADPATH. These blocks occurred in the form of
>
> if (built-in LOADPATH exists)
>
>
>
> On Mon, Aug 18, 2008 at 3:30 PM, Aanjhan Ranganathan <
> [EMAIL PROTECTED]> wrote:
>
>> Thanks for the report and helping us make Ubuntu better. Could be a
>> packaging issue and the warnings generated while doing a
>> "toggle_plplot_use" could be of importance. Confirming the issue and
>> below are the warning verbatim.
>>
>> octave3.0:2> toggle_plplot_use
>> warning: You may want to call
>> warning("off","Octave:built-in-variable-assignment");
>> to prevent spurious warnings from the plplot code for compatability with
>> octave 2.0/2.1.
>>
>> warning: LOADPATH is no longer a built-in variable; please read the NEWS
>> file or type `news' for details
>> warning: LOADPATH is no longer a built-in variable; please read the NEWS
>> file or type `news' for details
>> warning: LOADPATH is no longer a built-in variable; please read the NEWS
>> file or type `news' for details
>> warning: LOADPATH is no longer a built-in variable; please read the NEWS
>> file or type `news' for details
>> Use PLplot: on
>>
>> ** Changed in: plplot (Ubuntu)
>> Status: New => Confirmed
>>
>> --
>> after using "toggle_plplot_use", octave fails to plat anything.
>> https://bugs.launchpad.net/bugs/259058
>> You received this bug notification because you are a direct subscriber
>> of the bug.
>>
>> Status in "plplot" source package in Ubuntu: Confirmed
>>
>> Bug description:
>> Binary package hint: octave-plplot
>>
>> I am running Ubuntu 8.04, octave 3.0 and I installed octave-plplot using
>> Synaptic Package Manager.
>> gnuplot works fine as the default plotting tool.
>>
>> At the octave command line I typed the command "toggle_plplot_use" to
>> enable plplot as the plotting package.
>> Some warnings were issued relating to the built-in variable LOADPATH, but
>> plplot was enabled.
>>
>> Now the command "plot(1:10)" should plot a straight line. No plot is
>> displayed. The following errors are shown:
>>
>> error: liblapack.so.3: cannot open shared object file: No such file or
>> directory
>> error: `plplot_octave' undefined near line 3163 column 1
>> error: called from `plsstrm'
>> error: evaluating if command near line 86, column 3
>> error: called from `figure' in file `/usr/share/plplot_octave/figure.m'
>> error: evaluating if command near line 19, column 3
>> error: called from `__pl_init' in file
>> `/usr/share/plplot_octave/support/__pl_init.m'
>> error: evaluating assignment expression near line 21, column 8
>> error: called from `__plt__' in file
>> `/usr/share/plplot_octave/support/__plt__.m'
>> error: called from `plot' in file `/usr/share/plplot_octave/plot.m'
>>
>>
>> Further details:
>> Ubuntu:
>> Description:Ubuntu 8.04.1
>> Release:8.04
>>
>> plplot-octave:
>> Installed: 5.8.0-6
>> Candidate: 5.8.0-6
>> Version table:
>> *** 5.8.0-6 0
>>500 http://ie.archive.ubuntu.com hardy/universe Packages
>>100 /var/lib/dpkg/status
>>
>
>
--
after using "toggle_plplot_use", octave fails to plat anything.
https://bugs.launchpad.net/bugs/259058
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310792] [NEW] no pi on calculator.
Public bug reported: I am using 8.12 and I went to applications >accessories>calculator and opened it. I went to scientific mode and found no "pi" nor was there understandable symbols like "times" was the asterisk. And when I wanted to do square roots I had to go: square root 144 and put the end parenthesis on for it to work. Otherwise it would say "malformed expression". ** Affects: ubuntu Importance: Undecided Status: New ** Tags: calc calculator pi root square -- no pi on calculator. https://bugs.launchpad.net/bugs/310792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310792] Re: no pi on calculator.
I am sorry I see no "con" on my calculator but I see a "cos" -- no pi on calculator. https://bugs.launchpad.net/bugs/310792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310990] [NEW] icon not resize-able
Public bug reported: on the desktop screen shot icon only can be resized smaller not bigger I thought it would resize I am using 8.12 and 2.6.27-6 generic and have a Pentium II processor ** Affects: ubuntu Importance: Undecided Status: New ** Tags: icon resize resize-able screem sean shot size -- icon not resize-able https://bugs.launchpad.net/bugs/310990 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310792] Re: no pi on calculator.
thanks so much. -- no pi on calculator. https://bugs.launchpad.net/bugs/310792 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 310990] Re: icon not resize-able
** Description changed: - on the desktop screen shot icon only can be resized smaller not bigger I - thought it would resize I am using 8.12 and 2.6.27-6 generic and have a - Pentium II processor + i went to gnome panel and dragged the icon "take screen shot" to the + desktop and right clicked on resize icon. insted of resizing it would + only get smalle instead of bigger the I am using 8.12 and 2.6.27-6 + generic and have a Pentium II processor ** Description changed: i went to gnome panel and dragged the icon "take screen shot" to the - desktop and right clicked on resize icon. insted of resizing it would - only get smalle instead of bigger the I am using 8.12 and 2.6.27-6 - generic and have a Pentium II processor + desktop and right clicked on resize icon. instead of resizing it would + only get smaller instead of bigger I thought it would get bigger like + most icons but it did not the I am using 8.12 and 2.6.27-6 generic and + have a Pentium II processor -- icon not resize-able https://bugs.launchpad.net/bugs/310990 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 251809] Re: scrollbar has some problem with multiple tabs
fix it please!! -- scrollbar has some problem with multiple tabs https://bugs.launchpad.net/bugs/251809 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 342962] [NEW] Jaunty
Public bug reported: Binary package hint: miro Hello, I am new convert to Ubuntu. Having installed Jauny Miro has gone? thanks John ** Affects: miro (Ubuntu) Importance: Undecided Status: New -- Jaunty https://bugs.launchpad.net/bugs/342962 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 320893] Re: [i915GM] Regression in xserver-xorg-video-intel version 2.4.1-1ubuntu10.3
I am running the proposed 10.4 package and it is working fine on my LG LT20 which was reported as not working with 10.3 above -- [i915GM] Regression in xserver-xorg-video-intel version 2.4.1-1ubuntu10.3 https://bugs.launchpad.net/bugs/320893 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 35601] Re: [X600] Black screen with DRI
This sounds a lot like bug #28925, about others, most of which have had more success using the radeon drivers, or getting the fglrx driver by apt-get install xorg-driver-fglrx (which is what I did, because I've had similar troubles with an X800). I would try that. I've noticed most of the ATI cards newer than the radeon 9600 don't work with the ATI driver, and I suspect the problem may be somehow linked. But that's just a suspicion. I'm not sure what we could do about that. -- [X600] Black screen with DRI https://launchpad.net/bugs/35601 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 45768] Re: Radeon X800 XL not recognized
*** This bug is a duplicate of bug 30284 *** I'm marking this as a duplicate of bug #30284, also an X800 PCI-E, also a failed detection problem, fixable by specifying the "radeon" driver. ** This bug has been marked a duplicate of bug 30284 X server fails to start - X850 PCI-E -- Radeon X800 XL not recognized https://launchpad.net/bugs/45768 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 30284] Re: X server fails to start - X850 PCI-E
** Bug 45768 has been marked a duplicate of this bug -- X server fails to start - X850 PCI-E https://launchpad.net/bugs/30284 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 25953] Re: ATI X800GT detected as X800SE, "ati" driver auto choosed by xorg doesn't work.
I suspect this is a duplicate of bug #30284. attaching the /var/log/Xorg.0.log file might verify this. Also, is the card PCI- Express, and do you know if specifying the "radeon" driver in the xorg.conf file lets your run an X-windows environment? -- ATI X800GT detected as X800SE, "ati" driver auto choosed by xorg doesn't work. https://launchpad.net/bugs/25953 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 32515] Re: My ATI Radeon X800 don't work after the boot
** Bug 47083 has been marked a duplicate of this bug ** Bug 25953 has been marked a duplicate of this bug -- My ATI Radeon X800 don't work after the boot https://launchpad.net/bugs/32515 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 47083] Re: installer CD fails to start X on Radeon X800 GTO
*** This bug is a duplicate of bug 32515 *** ** This bug has been marked a duplicate of bug 32515 My ATI Radeon X800 don't work after the boot -- installer CD fails to start X on Radeon X800 GTO https://launchpad.net/bugs/47083 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 25953] Re: ATI X800GT detected as X800SE, "ati" driver auto choosed by xorg doesn't work.
*** This bug is a duplicate of bug 32515 *** Umm...oops. This is a duplicate of bug #32515. 30284 can't be fixed with the radeon or fglrx drivers. My mad. ** This bug has been marked a duplicate of bug 32515 My ATI Radeon X800 don't work after the boot -- ATI X800GT detected as X800SE, "ati" driver auto choosed by xorg doesn't work. https://launchpad.net/bugs/25953 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50656] bittorrent refuses to download debian-testing-amd64-binary-x.iso files
Public bug reported: Binary package hint: bittorrent When opening the file debian-testing-amd64-binary-x.ist (x being any of the binary cd numbers for debian) in bittorrent or ktorrent (and probably bittornado, I haven't tried), an error occurs, and the download fails. In ktorrent, this causes an immediate crash of the program, and whenever ktorrent is restarted, an error message appears: "Cannot create /debian-testing-amd64-binary-2.iso: Permission denied." (I attempted to download to the home folder, not root). I admit, this is a very odd problem. Other notes: dpkg-reconfigure ktorrent removes the error message This bug only seems to apply to debian-testing-amd64-binary-x.iso.torrent files. Other debian cds don't seem to have problems. ** Affects: bittorrent (Ubuntu) Importance: Untriaged Status: Unconfirmed -- bittorrent refuses to download debian-testing-amd64-binary-x.iso files https://launchpad.net/bugs/50656 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 50656] Re: bittorrent refuses to download debian-testing-amd64-binary-x.iso files
I should mention that bittorrent-gui, when the same process is attempted immediately claims 100% completion, and creates an empty text file for debian-testing-amd64-binary-2.iso. I obtained the file from http://cdimage.debian.org/cdimage/weekly-builds/amd64/bt-cd/ . -- bittorrent refuses to download debian-testing-amd64-binary-x.iso files https://launchpad.net/bugs/50656 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1] Re: Microsoft has a majority market share
Of course it's a conspiracy. Everything that involves that much money and secrecy has to become a conspiracy. That's why you switch to free software, if everybody knows what's in it, there's no need to conspire! -- Microsoft has a majority market share https://launchpad.net/bugs/1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 42679] Re: Gnomad2 Version bump required for new players
Gnomad 2.8.3 does indeed support MTP, but the package in Edgy wasn't compiled with it enabled. -- Gnomad2 Version bump required for new players https://launchpad.net/bugs/42679 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69786] Re: Usplash and Virtual Terminals Not Working
I just removed the usplash package and the problem did not go away. Does anyone an idea where I should refile this bug? -- Usplash and Virtual Terminals Not Working https://launchpad.net/bugs/69786 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
I upgraded last night. The resolution was fine when I had 915resolution installed still (after the upgrade) but it still could not recover after a hibernate with uswsusp (and could not hibernate without uswsusp). I uninstalled 915 because you said it was obsolete. Unfortunately this makes me unable to use 1280x768 resolution. ** Changed in: 915resolution (Ubuntu) Status: Incomplete => New -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 194190] Re: Please sync cacti 0.8.7b-1 (universe) from Debian unstable (main)
FYI I tested last night: the new cacti package came through and upgraded perfectly. The actual cacti install script also upgraded the DB fine too. Thanks. 2008/4/14 Scott Kitterman <[EMAIL PROTECTED]>: > Yes > > .. Original Message ... > On Mon, 14 Apr 2008 14:17:48 - Luca Falavigna <[EMAIL PROTECTED]> > wrote: > >motu-release, is it OK to upload? > > > >-- > >Please sync cacti 0.8.7b-1 (universe) from Debian unstable (main) > >https://bugs.launchpad.net/bugs/194190 > >You received this bug notification because you are a member of MOTU > >Release Team, which is a direct subscriber. > > > > -- > Merge cacti 0.8.7b-1 (universe) from Debian unstable (main) > https://bugs.launchpad.net/bugs/194190 > You received this bug notification because you are a direct subscriber > of the bug. > ** Attachment added: "unnamed" http://launchpadlibrarian.net/13592770/unnamed -- Merge cacti 0.8.7b-1 (universe) from Debian unstable (main) https://bugs.launchpad.net/bugs/194190 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 193209] Re: Cacti install stops on "dbconfig-common: flushing administrative password"
Yes, just updated my Hardy last night, the Cacti upgrade worked perfectly, including the actual cacti upgrade script. Thanks. 2008/4/21 slasher-fun <[EMAIL PROTECTED]>: > Now working for me (I didn't try for a long time anyway). Can somebody > confirm that this is working now ? > > -- > Cacti install stops on "dbconfig-common: flushing administrative password" > https://bugs.launchpad.net/bugs/193209 > You received this bug notification because you are a direct subscriber > of the bug. > ** Attachment added: "unnamed" http://launchpadlibrarian.net/13592762/unnamed -- Cacti install stops on "dbconfig-common: flushing administrative password" https://bugs.launchpad.net/bugs/193209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 217281] [NEW] Atheros Driver Does Not Work
Public bug reported: The Ubuntu install detects the Atheros Communications Wifi card, and uses a driver which does not work. It says that it is implementing unsafe hardware, but nothing is implemented. It does not detect wifi access points. Here is a fix for it: http://ubuntuforums.org/showthread.php?t=512828 We need to get all prepackaged hardware to work out of the box so that we can get more people to switch over to ubuntu on their own. I can provide screen shots etc, if desired. I was running 08.04 beta (not sure what build). Laptop is an Acer 5570z. ** Affects: ubuntu Importance: Undecided Status: New -- Atheros Driver Does Not Work https://bugs.launchpad.net/bugs/217281 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
** Attachment added: "lspci -vv" http://launchpadlibrarian.net/9002986/lspci_vv.txt -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] 915resolution does not resume from hibernate
Public bug reported: Binary package hint: 915resolution I have an HP Pavilioin dv1000t laptop with 1280x768 resolution supported through 915resolution. Running the latest Feisty. When I hibernate the system (works OK) and then resume, the system fails to 1024x768 resolution. Also, I'm using uswsusp for hibernate because the default did not work for me. ** Affects: 915resolution (Ubuntu) Importance: Undecided Status: New -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/9002988/xorg.conf -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
** Attachment added: "lspci -vvn" http://launchpadlibrarian.net/9002987/lspci_vvn.txt -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/9002997/Xorg.0.log -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. $ -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 134972] Re: 915resolution does not resume from hibernate
** Also affects: acpi-support Importance: Undecided Status: New -- 915resolution does not resume from hibernate https://bugs.launchpad.net/bugs/134972 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184642] WHILE ON COMCAST CRASHES OUT
Public bug reported: Binary package hint: firefox WHILE ON COMCAST AT TIMES IT GOES OFF ** Affects: firefox (Ubuntu) Importance: Undecided Status: New -- WHILE ON COMCAST CRASHES OUT https://bugs.launchpad.net/bugs/184642 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Attachment added: "Photo of the display." http://launchpadlibrarian.net/11455561/ubuntu_photo.JPG -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Attachment added: "xorg.conf" http://launchpadlibrarian.net/11455563/xorg.conf -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Attachment added: "lspci -vv output" http://launchpadlibrarian.net/11455565/lspci-vv -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Attachment added: "Xorg.0.log" http://launchpadlibrarian.net/11455564/Xorg.0.log -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Attachment added: "lspci -vvn output" http://launchpadlibrarian.net/11455567/lspci-vvn -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Odd behavior with H193Wk display at 1440x900.
Public bug reported: My H193Wk 19" display (does not use DVI) doesn't seem to work well at its native resolution of 1440x900. Every other resolution fills the screen just fine. Its pretty easy to reproduce as long as you have the same display. The default settings as well as the modeline solution I found elsewhere on the forum produced the same results, and yes it was a clean install. Currently 7.10 is installed, with the latest updates. Oddly enough on my current system, the nvidia proprietary drivers fix this problem. Can't do that with the radeon machine :( I have posted the xorg.conf, Xorg.0.log, lspci -vv and lspci -vvn results on the forum already, as well as taken a photo of the problem. I don't see way to attach text or photos here as I'm pretty new to all this, so I'll just link to it all: http://ubuntuforums.org/showthread.php?t=672801, and its probably easier to read there. I'll repost the info here once I figure out how, haha. ** Affects: ubuntu Importance: Undecided Status: New -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
Looks like this will be fixed "upstream" (is that the right usage of the word?) I just happen to have a quirky monitor. Heres the working xorg.conf For more details just check my forum post or the freedesktop.org bug report at: https://bugs.freedesktop.org/show_bug.cgi?id=14166 ** Attachment added: "xorg.conf" http://launchpadlibrarian.net/11457374/xorg.conf ** Changed in: ubuntu Status: New => Invalid -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
Changing the status again since this looks like it was fixed upstream already? Not sure though. Here is the response I got from the freedesktop bug report. Comment #3 From Alex Deucher 2008-01-21 06:37:06 PST (II) RADEON(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) RADEON(0): Supported additional Video Mode: (II) RADEON(0): clock: 106.5 MHz Image Size: 408 x 255 mm (II) RADEON(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) RADEON(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) RADEON(0): Modeline "1440x900" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync (II) RADEON(0): Modeline "1440x900" 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync This is the reversed polarity bug in the edid parser in the ubuntu xserver 1.3. I thought ubuntu had patched this, but perhaps not. Make sure you have the latest xserver bits from ubuntu. I followed these instructions and just reproduced the bug by commenting out the preferredmode after making sure everything was up to date. Not sure what to do now though. ** Changed in: ubuntu Status: Invalid => New -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 184715] Re: Odd behavior with H193Wk display at 1440x900.
** Changed in: xorg (Ubuntu) Sourcepackagename: None => xorg -- Odd behavior with H193Wk display at 1440x900. https://bugs.launchpad.net/bugs/184715 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 181510] freeradius: perl symbol lookup error
Public bug reported:
Binary package hint: freeradius
FreeRadius can start a perl module script, but when asked to do so it
cannot find libraries:
freeradius: symbol lookup error:
/usr/lib/perl/5.8/auto/Socket/Socket.so: undefined symbol:
Perl_Tstack_sp_ptr
Tested on: Ununtu 7.10 server.
See also http://www.mail-archive.com/[EMAIL PROTECTED]/msg41030.html
Perl -V & fradius output is below.
Compiling freeRadius for a tarball solves the problem, so presumably there is
an issue with the way FreeRadius was built for Ubuntu?
Any suggestions?
Thanks in advance,
Sean
FreeRadisu startup --
freeradius -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/freeradius/clients.conf
Config: including file: /etc/freeradius/eap.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/freeradius"
main: libdir = "/usr/lib/freeradius"
main: radacctdir = "/var/log/freeradius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/freeradius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/freeradius/freeradius.pid"
main: user = "freerad"
main: group = "freerad"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib/freeradius
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = yes
mschap: require_strong = yes
mschap: with_ntdomain_hack = yes
mschap: passwd = "(null)"
mschap: ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--domain=%{mschap:NT-Domain:-MYDOMAIN} --username=%{mschap:User-Name}
--challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
Module: Instantiated mschap (mschap)
Module: Loaded perl
perl: module = "/opt/nac/bin/rad2vmps"
perl: func_authorize = "authorize"
perl: func_authenticate = "authenticate"
perl: func_accounting = "accounting"
perl: func_preacct = "preacct"
perl: func_checksimul = "checksimul"
perl: func_detach = "detach"
perl: func_xlat = "xlat"
perl: func_pre_proxy = "pre_proxy"
perl: func_post_proxy = "post_proxy"
perl: func_post_auth = "post_auth"
perl: perl_flags = "(null)"
perl: func_start_accounting = "(null)"
perl: func_stop_accounting = "(null)"
freeradius: symbol lookup error: /usr/lib/perl/5.8/auto/Socket/Socket.so:
undefined symbol: Perl_Tstack_sp_ptr
perl -V
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.15.7, archname=i486-linux-gnu-thread-multi
uname='linux terranova 2.6.15.7 #1 smp thu jul 12 14:27:56 utc 2007 i686
gnulinux '
config_args='-Dusethreads -Duselargefiles -Dccflags=-DDEBIAN
-Dcccdlflags=-fPIC -Darchname=i486-linux-gnu -Dprefix=/usr
-Dprivlib=/usr/share/perl/5.8 -Darchlib=/usr/lib/perl/5.8 -Dvendorprefix=/usr
-Dvendorlib=/usr/share/perl5 -Dvendorarch=/usr/lib/perl5
-Dsiteprefix=/usr/local -Dsitelib=/usr/local/share/perl/5.8.8
-Dsitearch=/usr/local/lib/perl/5.8.8 -Dman1dir=/usr/share/man/man1
-Dman3dir=/usr/share/man/man3 -Dsiteman1dir=/usr/local/man/man1
-Dsiteman3dir=/usr/local/man/man3 -Dman1ext=1 -Dman3ext=3perl
-Dpager=/usr/bin/sensible-pager -Uafs -Ud_csh -Uusesfio -Uusenm -Duseshrplib
-Dlibperl=libperl.so.5.8.8 -Dd_dosuid -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define
usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBIAN
-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -D
[Bug 181510] Re: freeradius: perl symbol lookup error
Perhaps the freeradius package was build against a different version of perl, than the v5.8 in Ubuntu 7.10? -- freeradius: perl symbol lookup error https://bugs.launchpad.net/bugs/181510 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 155947] Re: ldap config causes Ubuntu to hang at a reboot
Happens for me on: Gutsy desktop Using ldap client I tried to follow the directions for working with nss-updatedb. That results in putting ldap in the nsswitch.conf. That seems to do it for me. I have to boot into single user mode and edit that file back to compat. Sean -- ldap config causes Ubuntu to hang at a reboot https://bugs.launchpad.net/bugs/155947 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 180352] Re: [backuppc] v3.10 package upgrade request
I've been reading through much of the Ubuntu docs on development, contribution, releases etc. I now have the feeling that version upgrades only occur between releases, so therefore backuppc v3.1 will only be packaged for, and tested with hardy. So a sysadmin of a backuppc server should expect to upgrade his Ubuntu release every 6 months to stay current with developments in backuppc. Have I understood the process correctly? -- [backuppc] v3.10 package upgrade request https://bugs.launchpad.net/bugs/180352 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 180352] [backuppc] v3.10 package upgrade request
Public bug reported: Binary package hint: backuppc Hi, I'm a Gutsy 7.10 user that finds backuppc really great. Now, I'd like to upgrade to v3.10 (from v3.0), and would prefer to use the proper packages than going to tarballs. On http://packages.qa.debian.org/b/backuppc.html I see that v3.10 is now in testing. On http://packages.ubuntu.com/gutsy/utils/backuppc there are no notes on v3.10 for Ubuntu e.g. who maintains for Ubuntu. My questions: - Does the Ubuntu version have non debian mods? - What is the procedure for making the debian package available on Ubuntu? - *Can I offer any help* in this process? I have three Ubuntu 7.10 servers running that I could test on, if that helps. I looked at http://doc.ubuntu.com/ubuntu/packagingguide/C/, which describes packaging, but where is the process for Universe packages defined? Thanks in advance, Sean ** Affects: backuppc (Ubuntu) Importance: Undecided Status: New -- [backuppc] v3.10 package upgrade request https://bugs.launchpad.net/bugs/180352 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 208151] [NEW] [cacti] install hangs when 'flushing administrative password'
Public bug reported: When installing cacti on hardy heron, the install process hangs before finishing. apt-get install cacti Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: cacti 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1858kB of archives. After this operation, 5173kB of additional disk space will be used. WARNING: The following packages cannot be authenticated! cacti Install these packages without verification [y/N]? Preconfiguring packages ... Selecting previously deselected package cacti. (Reading database ... 37581 files and directories currently installed.) Unpacking cacti (from .../cacti_0.8.7a-2ubuntu1_all.deb) ... Setting up cacti (0.8.7a-2ubuntu1) ... dbconfig-common: writing config to /etc/dbconfig-common/cacti.conf Replacing config file /etc/dbconfig-common/cacti.conf with new version Replacing config file /etc/cacti/debian.php with new version granting access to database cacti for [EMAIL PROTECTED]: success. verifying access for [EMAIL PROTECTED]: success. creating database cacti: success. verifying database cacti exists: success. populating database via sql... done. dbconfig-common: flushing administrative password ==> At this stage it hangs, so I do a control -C: dpkg: error processing cacti (--configure): subprocess post-installation script killed by signal (Interrupt) Errors were encountered while processing: cacti E: Sub-process /usr/bin/dpkg returned an error code (1) This is a freshly install Jeos Vm, updated with patches, so there are no other apps that could interfere. I install mysql-server beforehand, and left the root password blank. 'apt-cache policy cacti' shows only one version of cacti available, so I cannot try out any other builds. The cacti DB has been created and does contain tables. The cacti install has not finished though, e.g. /etc/cacti/apache.conf has not been created. Then I did cd /var/www ln -s /usr/share/cacti/site cacti /etc/init.d/apache2 reload and fired up the browser and connected to the cacti URL which allowed me to complete the installation. So its not a show stopper, cacti still runs. I'm still learning about Debian packages, where is the install script, so I can step through it and see what steps did not get executed? Thanks in advance, Sean ** Affects: ubuntu Importance: Undecided Status: New -- [cacti] install hangs when 'flushing administrative password' https://bugs.launchpad.net/bugs/208151 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 208151] Re: [cacti] install hangs when 'flushing administrative password'
*** This bug is a duplicate of bug 193209 *** https://bugs.launchpad.net/bugs/193209 HI, Apologies and yes, your are right. I did search, but not well enough it seems. I'll follow that thread and add comments if appropriate. Sean On 28/03/2008, Pascal De Vuyst <[EMAIL PROTECTED]> wrote: > > *** This bug is a duplicate of bug 193209 *** > https://bugs.launchpad.net/bugs/193209 > > Thank you for taking the time to report this bug and helping to make > Ubuntu better. This particular bug has already been reported, so it is > being marked as a duplicate. Please look at the other bug report to see > if there is any missing information that you can provide, or to see if > there is a workaround for the bug. Additionally, any further discussion > regarding the bug should occur in the other report. Feel free to > continue to report any other bugs you may find. > > ** Changed in: cacti (Ubuntu) > Sourcepackagename: None => cacti > > ** This bug has been marked a duplicate of bug 193209 >Cacti install stops on "dbconfig-common: flushing administrative > password" > > > -- > [cacti] install hangs when 'flushing administrative password' > https://bugs.launchpad.net/bugs/208151 > You received this bug notification because you are a direct subscriber > of the bug. > ** Attachment added: "unnamed" http://launchpadlibrarian.net/12942206/unnamed -- [cacti] install hangs when 'flushing administrative password' https://bugs.launchpad.net/bugs/208151 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 193209] Re: Cacti install stops on "dbconfig-common: flushing administrative password"
I've read FeatureFreezeException but am a little confused. I have to be a member of ubuntu-release or more likely motu-release<https://launchpad.net/%7Emotu-release>for that? "Requests for freeze exceptions for main should be filed as bugs in launchpad against the relevant package (or just "Ubuntu" if the package is not available yet). Once the bug is filed and the necessary information is available, subscribe ubuntu-release<https://launchpad.net/%7Eubuntu-release>(main, restricted) or motu-release<https://launchpad.net/%7Emotu-release>(universe, multiverse)." Its not an upstream problem, so I've a bit fizzy as how to submit an Exception? Maybe its under featureFreeze? I'm supposed to subscribe to a motu-release mailing list, and then post a request to that? Thanks, Sean On 28/03/2008, Pascal De Vuyst <[EMAIL PROTECTED]> wrote: > > To get this fixed in Ubuntu 8.04 somebody should file a > FeatureFreezeException as described here: > https://wiki.ubuntu.com/FreezeExceptionProcess > > > -- > Cacti install stops on "dbconfig-common: flushing administrative password" > https://bugs.launchpad.net/bugs/193209 > You received this bug notification because you are a direct subscriber > of a duplicate bug. > ** Attachment added: "unnamed" http://launchpadlibrarian.net/12942571/unnamed -- Cacti install stops on "dbconfig-common: flushing administrative password" https://bugs.launchpad.net/bugs/193209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194190] Re: Please sync cacti 0.8.7b-1 (universe) from Debian unstable (main)
Could I have a status update please, this update may also fix this: https://bugs.launchpad.net/ubuntu/+source/cacti/+bug/193209 It would be good if this could be fixed before hardy is released.. -- Please sync cacti 0.8.7b-1 (universe) from Debian unstable (main) https://bugs.launchpad.net/bugs/194190 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 193209] Re: Cacti install stops on "dbconfig-common: flushing administrative password"
According to https://bugs.launchpad.net/ubuntu/+source/cacti/+bug/194190 a security fix upgrade to cacti 0.8.7b-1 has been requested, and it might solve our problem too? -- Cacti install stops on "dbconfig-common: flushing administrative password" https://bugs.launchpad.net/bugs/193209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 193209] Re: Cacti install stops on "dbconfig-common: flushing administrative password"
According to http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=470066, dated 17th March, "We believe that the bug you reported is fixed in the latest version of cacti" ... cacti_0.8.7b-1.1. As regards "ucf" is this now fixed? So what do we need to do to get a installable cacti in Hardy? - get a newer upsteam version of cacti - or ucf, or just comment out the ucf - or adapt /var/lib/dpkg/info/cacti.postinst (if i understand, commenting the ucf line works)? The hardy release is close and I'm never to Ubuntu packaging/processes, I'd appreciate any hints. Myself, I had to do the following on both 7.10 and 8.04 beta to get cacti working (See 'Invalid PHP_SELF Path' http://forums.cacti.net/post-130180.html) vi /etc/cacti/apache.conf #Alias /cacti /usr/share/cacti/site cd /var/www ln -s /usr/share/cacti/site cacti /etc/init.d/apache2 reload So perhaps the line: ucf /usr/share/doc/cacti/cacti.apache.conf /etc/cacti/apache.conf is no good anyway? -- Cacti install stops on "dbconfig-common: flushing administrative password" https://bugs.launchpad.net/bugs/193209 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 181510] Re: freeradius: perl symbol lookup error
Hi, I just reinstalled freeradius now again on an Ubuntu 7.10. apt-get install freeradius .. The following NEW packages will be installed: freeradius libperl5.8 . Unpacking libperl5.8 (from .../libperl5.8_5.8.8-7ubuntu3.1_i386.deb) ... Unpacking freeradius (from .../freeradius_1.1.6-2_i386.deb) ... ... The config file is attached, on starting I see in /var/log/freeradius/radius.log /etc/init.d/freeradius restart * Stopping FreeRADIUS daemon freeradius /var/run/freeradius/freeradius.pid not found... * Starting FreeRADIUS daemon freeradius Wed Mar 26 22:50:03 2008 : Info: Starting - reading configuration files ... /usr/sbin/freeradius: symbol lookup error: /usr/lib/perl/5.8/auto/Socket/Socket.so: undefined symbol: Perl_Tstack_sp_ptr Wed Mar 26 22:50:03 2008 : Info: Using deprecated naslist file. Support for this will go away soon. Wed Mar 26 22:50:03 2008 : Info: rlm_exec: Wait=yes but no output defined. Did you mean output=none? Regards, Sean On 24/03/2008, Chuck Short <[EMAIL PROTECTED]> wrote: > > If possible can you please attach your config? > > Thanks > > chuck > > > -- > freeradius: perl symbol lookup error > https://bugs.launchpad.net/bugs/181510 > You received this bug notification because you are a direct subscriber > of the bug. > -- freeradius: perl symbol lookup error https://bugs.launchpad.net/bugs/181510 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93051] Re: Kmail + IMAP: Duplicates mails with attachment
I have seen this when I am using IMAP with MS Exchange 2003 XP server. I had to switch to disconnected imap to avoid seeing duplicates. I am using Feisty. Sean -- Kmail + IMAP: Duplicates mails with attachment https://bugs.launchpad.net/bugs/93051 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 107616] Re: Poor security defaults
OK, but can't you atleast have a iptables update with ICMP filtering enabled? -- Poor security defaults https://bugs.launchpad.net/bugs/107616 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 108743] "Desktops Effects" crapped up my computer that has a nVidia GeForce2 Go graphics card, upon reboot.
Public bug reported: My graphics card: 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2) I opened Desktops Effects which was installed recently when I updated to Fiesty. I was prompted by a pop-up window with the following text: " Enable the driver? NVIDIA accelerated graphics driver This driver is required to fully utilise the 3D potential of NVIDIA graphics cards, as well as provide 2D acceleration of newer cards. If you wish to enable desktop effects, this driver is required. If this driver is not enabled, you will not be able to enable desktop effects and will not be able to run software that requires 3D acceleration, such as some games. " Upon clicking "enable driver" the first time it brought up the Update Manager with the necessary driver that was requested and warned that it was not open source or something like that (I can't quite remember and can't duplicate it). After the installation of the driver another window popped up and prompted me to reboot my computer for the new driver to take affect. During the reboot, about the time where the splash screen should have asked me for my username and password, the left side of my screen turned an orange color similar to that of the splash screen while the right side remained almost entirely black. This description is very similar to Bug #106309 except that nothing was working; there were no details on the splash screen and I could not enter my username/password. After examining my network interfaces (rebooted in safemode) via "sudo vi /etc/network/interfaces", this is what I found: Section "Device" Identifier "NVIDIA Corporation NV11 [GeForce2 Go]" Driver "nvidia" Busid "PCI:1:0:0" Option "AddARGBVisuals""True" Option "AddARGBGLXVisuals" "True" Option "NoLogo""True" EndSection I changed the driver back to "nv": Driver "nv" and rebooted and was back to a working computer. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- "Desktops Effects" crapped up my computer that has a nVidia GeForce2 Go graphics card, upon reboot. https://bugs.launchpad.net/bugs/108743 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 107616] Poor security defaults
Public bug reported: Security by default in ubuntu is not up to scratch at all, I understand that iptables in the kernel does the job but it's not acceptable and very basic for this day and age. Please can we have Firestarter (frontend) installed by default or ICMP filtering enabled in iptables and or Firestarter. Even Windows XP SP2 has better default firewall security than Ubuntu and the fact that a cracker can ping your machine to get a response to say something is there is not good. We should not make the mistake (like Windows) with security defaults, just because we are low on the radar of crackers dont mean we can step back, after all thats what SELinux are in the kernel for. ** Affects: Ubuntu Importance: Undecided Status: Unconfirmed -- Poor security defaults https://bugs.launchpad.net/bugs/107616 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68918] IBM Java crashed while running azureus
Public bug reported: Binary package hint: azureus Crash report attached. ** Affects: azureus (Ubuntu) Importance: Undecided Status: Unconfirmed -- IBM Java crashed while running azureus https://launchpad.net/bugs/68918 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68918] Re: IBM Java crashed while running azureus
** Attachment added: "Crash Report" http://librarian.launchpad.net/4939386/_usr_lib_j2sdk1.5-ibm_jre_bin_java.wf1Y_Q.crash -- IBM Java crashed while running azureus https://launchpad.net/bugs/68918 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 69786] Usplash and Virtual Terminals Not Working
Public bug reported: On my Powermac G4 (quicksilver) running Edgy, during boot up, there is no splash screen. After the yaboot prompt, the screen goes completely white for a minute or so, and eventually the gdm login screen appears. Once the computer has started, when I try to switch to a virtual terminal, (control + alt + F Key) - I get, a black and white distorted version of my previous screen. On shutdown, the screen looks like it does when I try to get a virtual terminal - the screen shows a black and white distorted version of my last screen. Both problems started when I upgraded to Dapper. I am using a GeForce2 MX card with the nv driver. Here is my yaboot.conf: image=/boot/vmlinux label=Linux read-only initrd=/boot/initrd.img append="quiet splash" If I remove "quiet" from the append line, the computer will not boot (monitor goes to standby (no signal) after yaboot prompt). If I remove "splash", there is no change (screen still goes white, still no terminals). ** Affects: usplash (Ubuntu) Importance: Undecided Status: Unconfirmed -- Usplash and Virtual Terminals Not Working https://launchpad.net/bugs/69786 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 86159] unexpected termination while running
Public bug reported: Binary package hint: spe spe 0.8.2.a on Ubuntu 6.10 ** Affects: spe (Ubuntu) Importance: Undecided Status: Unconfirmed -- unexpected termination while running https://launchpad.net/bugs/86159 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 68918] Re: IBM Java crashed while running azureus
I simply launched azureus. The torrents screen came up for a few seconds (without any of the buttons), and then disappeared. I downloaded the .jar file from the azureus website and there were no problems, so I think it is specific to ubuntu's azureus. -- IBM Java crashed while running azureus https://launchpad.net/bugs/68918 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 59734] Re: offb consoles are blank
I am having the same problem on my Apple G4 Quicksilver, however, I can't seem to get the splash screen to work even after recompiling the kernel with riva, the screen just goes dark until gdm starts (it was white before I recompiled the kernel). I have tried reinstalling usplash, but it doesn't seem to be working. Also, only VT 1 works for me, and the resolution is not correct. The other screens are simply blank (black). Dave, what settings did you use in your yaboot.conf to get it to work? Sean -- offb consoles are blank https://launchpad.net/bugs/59734 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 59734] Re: offb consoles are blank
If I run fbset -a 1024x768-75, then all the virtual terminals work, and when I shut down, I saw part of the usplash shutdown, but when the computer reboots, the splash screen doesn't work and the terminals have the same problems as before (blank screen). -- offb consoles are blank https://launchpad.net/bugs/59734 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 44904] Re: Intel 82945G Express Chipset (GMA950) Flight 7
wow this is late.. Edgy Eft got rid of that problem. On 12/14/06, Ben Collins <[EMAIL PROTECTED]> wrote: > > kernel != X > > ** Changed in: linux-source-2.6.17 (Ubuntu) > Sourcepackagename: linux-source-2.6.17 => xorg > > -- > Intel 82945G Express Chipset (GMA950) Flight 7 > https://launchpad.net/bugs/44904 > -- yeah I guess it's just one of those days. -- Intel 82945G Express Chipset (GMA950) Flight 7 https://launchpad.net/bugs/44904 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 44904] Re: Intel 82945G Express Chipset (GMA950) Flight 7
I wish I could help you but I got nothin, I even switched back to Windows from all this hardware frustration. On 12/21/06, Arvoredo <[EMAIL PROTECTED]> wrote: > > > I have just installed Ubuntu from the 6.10 CD. After a short use, I had to > go back to Windows, in dual boot mode. After a short time I came back to > Ubuntu to resume my work. The second or third time I did that, the screen > resolution stuck at 640x480x60Hz. > I immediately began to look for a hotfix, sinaptic or whatever info I > could find. As the search was fruitless, I unistalled Ubuntu and reinstalled > it. After a few boot the resolution stuck again at 640x480. > This is happening in an Intel(R) 82945G Express onboard graphics that came > with HP dc7600 convertible minitower. As I'm using the old CRT monitor > because I just can't adjust to LCD flicker, this may be the same problem as > previous posts described. > How can I fix that? I want a resolution for that! A screen resolution, for > that matter!! > > Thank you for reading. > Arvoredo > > -- > Intel 82945G Express Chipset (GMA950) Flight 7 > https://launchpad.net/bugs/44904 > -- yeah I guess it's just one of those days. -- Intel 82945G Express Chipset (GMA950) Flight 7 https://launchpad.net/bugs/44904 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305544] Re: 8.10 non-lan wired network speed slow
** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- 8.10 non-lan wired network speed slow https://bugs.launchpad.net/bugs/305544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 305544] Re: 8.10 non-lan wired network speed slow
Sorry for noticing the above comments. I'm not sure how I solved the issue but I've several hard and karmic systems now that don't exhibit this behaviour. -- 8.10 non-lan wired network speed slow https://bugs.launchpad.net/bugs/305544 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 542362] Re: BUG: scheduling while atomic: swapper/0/0x10000100
apport information
** Tags added: apport-collected
** Description changed:
This occurred after sending a file from a blackberry phone to the
laptop(dell e6400) via bluetooth. I am not exactly sure why. If I can
obtain further info please let me know.
Linux soundwave 2.6.32-16-generic #25-Ubuntu SMP Tue Mar 9 16:33:12 UTC
2010 x86_64 GNU/Linux
Description: Ubuntu lucid (development branch)
Release: 10.04
ProblemType: KernelOops
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Annotation: Your system might become unstable now and might need to be
restarted.
AplayDevices:
List of PLAYBACK Hardware Devices
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Architecture: amd64
ArecordDevices:
List of CAPTURE Hardware Devices
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: sme1890 F pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf6fdc000 irq 21'
Mixer name : 'IDT 92HD71B7X'
Components : 'HDA:111d76b2,10280233,00100302'
Controls : 20
Simple ctrls : 14
Date: Fri Mar 19 18:57:51 2010
DistroRelease: Ubuntu 10.04
Failure: oops
Frequency: This has only happened once.
HibernationDevice: RESUME=UUID=4354dc98-c478-42bd-a755-e9bfb891be56
InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100224.1)
MachineType: Dell Inc. Latitude E6400
NonfreeKernelModules: nvidia
Package: linux-image-2.6.32-16-generic 2.6.32-16.25
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-16-generic
root=UUID=7a438e85-12f0-45af-a375-d6fb8d95e355 ro quiet splash
ProcVersionSignature: Ubuntu 2.6.32-16.25-generic
Regression: No
RelatedPackageVersions: linux-firmware 1.32
Reproducible: No
SourcePackage: linux
TestedUpstream: No
Title: BUG: scheduling while atomic: swapper/0/0x1100
Uname: Linux 2.6.32-16-generic x86_64
dmi.bios.date: 02/13/2009
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A12
dmi.board.asset.tag: 001507
dmi.board.name: 0RX495
dmi.board.vendor: Dell Inc.
dmi.chassis.asset.tag: 001507
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvrA12:bd02/13/2009:svnDellInc.:pnLatitudeE6400:pvr:rvnDellInc.:rn0RX495:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Latitude E6400
dmi.sys.vendor: Dell Inc.
+ ---
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
+ AplayDevices:
+ List of PLAYBACK Hardware Devices
+ card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
+Subdevices: 1/1
+Subdevice #0: subdevice #0
+ Architecture: amd64
+ ArecordDevices:
+ List of CAPTURE Hardware Devices
+ card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
+Subdevices: 2/2
+Subdevice #0: subdevice #0
+Subdevice #1: subdevice #1
+ AudioDevicesInUse:
+ USERPID ACCESS COMMAND
+ /dev/snd/controlC0: sme 24126 F pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ Card0.Amixer.info:
+ Card hw:0 'Intel'/'HDA Intel at 0xf6fdc000 irq 21'
+Mixer name : 'IDT 92HD71B7X'
+Components : 'HDA:111d76b2,10280233,00100302'
+Controls : 20
+Simple ctrls : 14
+ DistroRelease: Ubuntu 10.04
+ HibernationDevice: RESUME=UUID=4354dc98-c478-42bd-a755-e9bfb891be56
+ InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha amd64 (20100224.1)
+ MachineType: Dell Inc. Latitude E6400
+ NonfreeKernelModules: nvidia
+ Package: linux (not installed)
+ PccardctlIdent:
+ Socket 0:
+no product info available
+ PccardctlStatus:
+ Socket 0:
+no card
+ ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic
root=UUID=7a438e85-12f0-45af-a375-d6fb8d95e355 ro quiet splash
+ ProcEnviron:
+ LANGUAGE=
+ PATH=(custom, user)
+ LANG=en_US.UTF-8
+ SHELL=/bin/zsh
+ ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
+ Regression: No
+ RelatedPackageVersions: linux-firmware 1.34
+ Reproducible: Yes
+ Tags: lucid needs-upstream-testing
+ Uname: Linux 2.6.32-21-generic x86_64
+ UserGroups: adm admin audio cdrom dialout dip fax floppy fuse lpadmin plugdev
sambashare tape video
+ WifiSyslog: Apr 27 12:29:17 soundwave kernel: [41762.502797]
npviewer.bin[15645]: segfault at ff999ea8 ip ff999ea8 sp
ffab623c error 14
+ dmi.bios.date: 02/13/2009
+ dmi.bios.vendor: Dell Inc.
+ dmi.bios.version: A12
+ dmi.board.asset.tag: 001507
+ dmi.board.name: 0RX495
+ dmi.board.vendor: Dell Inc.
+ dmi.chassis.asset.tag: 001507
+ dmi.chassis.type: 8
+ dmi.chassis.vendor: Dell Inc.
+ dmi
[Bug 542362] BootDmesg.txt
apport information ** Attachment added: "BootDmesg.txt" http://launchpadlibrarian.net/45816207/BootDmesg.txt -- BUG: scheduling while atomic: swapper/0/0x1100 https://bugs.launchpad.net/bugs/542362 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 542362] Card0.Amixer.values.txt
apport information ** Attachment added: "Card0.Amixer.values.txt" http://launchpadlibrarian.net/45816221/Card0.Amixer.values.txt -- BUG: scheduling while atomic: swapper/0/0x1100 https://bugs.launchpad.net/bugs/542362 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
