[Bug 362858] Re: X freeze - requires hard restart

[eddy]

Thanks for the advice.
Unfortunately it does not appear to have had any effect, it is still freezing.

-- 
X freeze - requires hard restart
https://bugs.launchpad.net/bugs/362858
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 314928] Re: [i915GM] MTRR entry gets removed when restarting xorg - causes corruption on ttys

[Eddy]

Thanks! Fixed my jerky flash videos.


lspci -v

this gives me 2 entries to my video card amongst others, its the first
one I need which tells me the memory region (Memory at d000 (32-bit,
prefetchable) [size=256M])

00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 
943/940GML Express Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 0201
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at eff0 (32-bit, non-prefetchable) [size=512K]
I/O ports at eff8 [size=8]
Memory at d000 (32-bit, prefetchable) [size=256M]
Memory at efec (32-bit, non-prefetchable) [size=256K]
Capabilities: 
Kernel modules: intelfb

00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML 
Express Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 0201
Flags: bus master, fast devsel, latency 0
Memory at eff8 (32-bit, non-prefetchable) [size=512K]
Capabilities: 


 
my mtrr before:

:~$ cat /proc/mtrr 
reg00: base=0x0 (0MB), size= 2048MB, count=1: write-back
reg01: base=0x07f80 ( 2040MB), size=8MB, count=1: uncachable
reg02: base=0x07f70 ( 2039MB), size=1MB, count=1: uncachable

I then use the memory region I obtained before and enter

sudo -s
echo "base=0xd000 size=0x1000 type=write-combining" > /proc/mtrr


AFTER:

reg00: base=0x0 (0MB), size= 2048MB, count=1: write-back
reg01: base=0x07f80 ( 2040MB), size=8MB, count=1: uncachable
reg02: base=0x07f70 ( 2039MB), size=1MB, count=1: uncachable
reg03: base=0x0d000 ( 3328MB), size=  256MB, count=2: write-combining

tada!

Fixed, thanks everyone

-- 
[i915GM] MTRR entry gets removed when restarting xorg - causes corruption on 
ttys
https://bugs.launchpad.net/bugs/314928
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 378041] [NEW] can not play any video

[Eddy]

Public bug reported:

Binary package hint: gxine

Hello all,

Hope someone can help me out. 
I aready read a lot of simular problems about the next situation

I have installed Ubuntu (version 8.10) on a windows partition.
I was amazed about how simple it was to install everything and all hardware 
where installed corectly!!! Also video and sound was not a problem
then I installed the new Ubuntu version 9.04 after the upgrade. I have some 
problems with playing video. sound is not an issue. I get sound with a black 
screen. 

I tried to play a AVI file with all available video programs like> 
VLC/TOTEM/GXINE/ Codeine etc etc.
All of them have the same result. I also installed all codecs ( restricted and 
unrestricted), I also de-installed video tools and codecs and reinstall all 
programs. also that does not work.

the avi file I try to play is one I have created with my digital camera.
So i guess if there is a codec used when making that movie it must be
one that can be played with all programs.

work around
the solution I found out now after many hours installing etc. 
when I play the movie with GXINE the file can not be played. but when I keep 
GXINE active and try to play the file with another program like VLC or any 
other software, there is no problem???

Please help me out with this!!!


with regards,

Eddy

** Affects: gxine (Ubuntu)
 Importance: Undecided
 Status: New

-- 
can not play any video
https://bugs.launchpad.net/bugs/378041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 378041] Re: can not play any video

[Eddy]

Hello Vladnistor,

I have tried several movie files MPG, AVI and DIVX. And all have the
same behavior as described in the message above.

Please also see the attached video, where you can see that movies can
only be executed when Gxine is opened and minimized


 apt-cache policy gxine
gxine:
  Geïnstalleerd: 0.5.903-4ubuntu1
  Kandidaat: 0.5.903-4ubuntu1
  Versietabel:
 *** 0.5.903-4ubuntu1 0
500 http://nl.archive.ubuntu.com jaunty/universe Packages
100 /var/lib/dpkg/status


If you need any more information please let me know

with regards,

Eddy


** Attachment added: "out-1.ogv"
   http://launchpadlibrarian.net/26944222/out-1.ogv

-- 
can not play any video
https://bugs.launchpad.net/bugs/378041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 292361] Re: usb-creator crashed with AttributeError in install_bootloader()

[Eddy]

** Visibility changed to: Public

-- 
usb-creator crashed with AttributeError in install_bootloader()
https://bugs.launchpad.net/bugs/292361
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

RE: [Bug 234881] Re: ATI restricted driver is 'enabled' but 'Not in use' after x64 Ubuntu install.This confuses user and gives no idea how to start using this proprietary driver.

[Eddy]

Hi there,
sorry for the delay! The package is not installed, I tried to do that but it is 
impossible (I send you also a screenshot of what appears when I try to install 
the package). You can find my xorg.conf, too.

Best regards


[EMAIL PROTECTED]@yahoo.it+33.6.28.33.51.73+39.339.5048493


> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Mon, 6 Oct 2008 06:49:05 +
> Subject: [Bug 234881] Re: ATI restricted driver is 'enabled' but 'Not in use' 
> after x64 Ubuntu install.This confuses user and gives no idea   how to start 
> using this proprietary driver.
>
> PowerUser, can you please attach your /etc/X11/xorg.conf and tell me
> whether the package "xorg-driver-fglrx" is installed?
>
> ** Changed in: jockey (Ubuntu)
>Status: New => Incomplete
>
> --
> ATI restricted driver is 'enabled' but 'Not in use' after x64 Ubuntu 
> install.This confuses user and gives no idea how to start using this 
> proprietary driver.
> https://bugs.launchpad.net/bugs/234881
> You received this bug notification because you are a direct subscriber
> of the bug.
>
> Status in “jockey” source package in Ubuntu: Incomplete
>
> Bug description:
> What has been done?
>  1) Ubuntu x64 8.04 (desktop version from live CD) has been installed with 
> almost default settings to 20Gb JFS partition.
>  No network was available during install.
>  2) Network has been configured.
>  3) Launched drivers manager (System->Administration->Hardware Drivers).It 
> displays that driver is "Enabled" but driver status still "Not in use".As it 
> could be obvious, there is no easy way to use this driver since if I'm 
> remembering correctly driver is downloaded when user marks checkbox.However 
> since it's already marked, user is getting confused.Actually, driver is not 
> present, 3D effects are not working.

_
Tutto il mondo MSN a portata di clic!
http://toolbar.msn.com/overview.aspx?loc=it-it

-- 
ATI restricted driver is 'enabled' but 'Not in use' after x64 Ubuntu 
install.This confuses user and gives no idea how to start using this 
proprietary driver.
https://bugs.launchpad.net/bugs/234881
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 234881] Re: ATI restricted driver is 'enabled' but 'Not in use' after x64 Ubuntu install.This confuses user and gives no idea how to start using this proprietary driver.

[Eddy]

** Attachment added: "xorg.conf"
   http://launchpadlibrarian.net/18325960/xorg.conf

** Attachment added: "screenshot.jpg"
   http://launchpadlibrarian.net/18325961/screenshot.jpg

-- 
ATI restricted driver is 'enabled' but 'Not in use' after x64 Ubuntu 
install.This confuses user and gives no idea how to start using this 
proprietary driver.
https://bugs.launchpad.net/bugs/234881
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 201202] Re: [bcm4xx] WiFi roaming causes NetworkManager to lose routing

[Eddy]

I Also have the same problem with my iwl3945 (Intel Wireless 3945), I'm using 
nm-applet to manage my wireless, and it just won't connect. Works fine if i 
switch over to Windows.. Hers my Sys Log.
Note: Im trying to connect to a open wireless network in a hotel.

Jun 17 10:56:19 blumlaptop dhcdbd: message_handler: message handler not found 
under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
Jun 17 10:56:19 blumlaptop NetworkManager:   Will activate connection 
'eth1/ChanningsHotel'. 
Jun 17 10:56:19 blumlaptop NetworkManager:   Device eth1 activation 
scheduled... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) started... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) Stage 1 of 
5 (Device Prepare) scheduled... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Old device 'eth1' 
activating, won't change. 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) Stage 1 of 
5 (Device Prepare) started... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) Stage 2 of 
5 (Device Configure) scheduled... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) Stage 1 of 
5 (Device Prepare) complete. 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1) Stage 2 of 
5 (Device Configure) starting... 
Jun 17 10:56:19 blumlaptop NetworkManager:   Activation (eth1/wireless): 
access point 'ChanningsHotel' is unencrypted, no key needed. 
Jun 17 10:56:19 blumlaptop NetworkManager:   Old device 'eth1' 
activating, won't change. 
Jun 17 10:56:19 blumlaptop last message repeated 3 times
...
Jun 17 10:56:21 blumlaptop NetworkManager:   Activation (eth1) Stage 2 of 
5 (Device Configure) complete. 
Jun 17 10:56:21 blumlaptop kernel: [   75.370224] eth1: Initial auth_alg=0
Jun 17 10:56:21 blumlaptop kernel: [   75.370236] eth1: authenticate with AP 
00:1e:2a:10:e4:c2
Jun 17 10:56:21 blumlaptop kernel: [   75.549628] eth1: authenticate with AP 
00:1e:2a:10:e4:c2
Jun 17 10:56:22 blumlaptop kernel: [   75.736553] eth1: authenticate with AP 
00:1e:2a:10:e4:c2
Jun 17 10:56:22 blumlaptop kernel: [   75.880368] eth1: authentication with AP 
00:1e:2a:10:e4:c2 timed out

-- 
[bcm4xx] WiFi roaming causes NetworkManager to lose routing
https://bugs.launchpad.net/bugs/201202
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 241800] [NEW] force standard comma keypad

[eddy]

Public bug reported:

The result of xprop -root | grep XKB
- The result of gconftool-2 -R /desktop/gnome/peripherals/keyboard/kbd

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
force standard comma keypad
https://bugs.launchpad.net/bugs/241800
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 362858] [NEW] X freeze - requires hard restart

[eddy]

Public bug reported:

Has occurred several times. It seems to be independent of the current
task or number of suspend/resumes. It has even occurred when the
computer has not been suspended at all since boot.

It appears as though system is still running, on one occasion it froze
during a large file transfer which continued and completed successfully
after the X freeze.

Next time it happens I will check to see if the laptop is still visible
on the network if this is of any help.

ProblemType: KernelOops
Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
Architecture: amd64
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
InterpreterPath: /usr/bin/python2.6
MachineType: Sony Corporation VGN-CS15GN_B
Package: linux-image-2.6.28-11-generic 2.6.28-11.41
ProcAttrCurrent: unconfined
ProcCmdLine: root=UUID=8ea5d67a-e58a-460e-a58a-b7f79530ff25 ro quiet splash
ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume
ProcEnviron: PATH=(custom, no user)
ProcVersionSignature: Ubuntu 2.6.28-11.41-generic
SourcePackage: linux
Tags: resume suspend
Title: [Sony Corporation VGN-CS15GN_B] suspend/resume failure
UserGroups:

** Affects: ubuntu
 Importance: Undecided
 Status: New


** Tags: amd64 apport-kerneloops resume suspend

-- 
X freeze - requires hard restart
https://bugs.launchpad.net/bugs/362858
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 362858] Re: X freeze - requires hard restart

[eddy]

** Attachment added: "BootDmesg.txt"
   http://launchpadlibrarian.net/25611811/BootDmesg.txt

** Attachment added: "CurrentDmesg.txt"
   http://launchpadlibrarian.net/25611812/CurrentDmesg.txt

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/25611813/Dependencies.txt

** Attachment added: "HalComputerInfo.txt"
   http://launchpadlibrarian.net/25611814/HalComputerInfo.txt

** Attachment added: "Lspci.txt"
   http://launchpadlibrarian.net/25611815/Lspci.txt

** Attachment added: "Lsusb.txt"
   http://launchpadlibrarian.net/25611816/Lsusb.txt

** Attachment added: "ProcCpuinfo.txt"
   http://launchpadlibrarian.net/25611818/ProcCpuinfo.txt

** Attachment added: "ProcInterrupts.txt"
   http://launchpadlibrarian.net/25611819/ProcInterrupts.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/25611820/ProcMaps.txt

** Attachment added: "ProcModules.txt"
   http://launchpadlibrarian.net/25611821/ProcModules.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/25611823/ProcStatus.txt

** Attachment added: "SleepLog.txt"
   http://launchpadlibrarian.net/25611824/SleepLog.txt

-- 
X freeze - requires hard restart
https://bugs.launchpad.net/bugs/362858
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 378041] Re: can not play any video

[Eddy]

Hello,

I solved the issue by using the restore function in Ubuntu. I'm now on
the latest version of Ubuntu and all works fine again.


with regards,

Eddy

-- 
can not play any video
https://bugs.launchpad.net/bugs/378041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158176] Computer freeze when machine boot up with 8180L wireless plugged in

[Eddy]

Public bug reported:

After upgrading from feisty to gutsy, with ndiswrapper and driver for
8180L driver already installed, the machine booting process freezes as
soon as it reaches the point where it tries to connect to the wireless
router (i.e. after it asks the key ring password).

This consistently happens. When it happens, the CAP LOCK light is
blinking and everything stops working. Have to force the machine down.

ProblemType: Bug
Architecture: i386
Date: Sun Oct 28 16:52:55 2007
DistroRelease: Ubuntu 7.10
ExecutablePath: /usr/bin/yelp
Package: yelp 2.20.0-0ubuntu3
PackageArchitecture: i386
ProcCmdline: yelp
ProcCwd: /home/eddy
ProcEnviron:
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: yelp
Uname: Linux eddy-laptop 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 
i686 GNU/Linux

** Affects: ubuntu
 Importance: Undecided
 Status: New


** Tags: apport-bug

-- 
Computer freeze when machine boot up with 8180L wireless plugged in
https://bugs.launchpad.net/bugs/158176
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158176] Re: Computer freeze when machine boot up with 8180L wireless plugged in

[Eddy]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/10200301/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/10200302/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/10200303/ProcStatus.txt

-- 
Computer freeze when machine boot up with 8180L wireless plugged in
https://bugs.launchpad.net/bugs/158176
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158176] Re: [GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in

[Eddy]

Here are the log files as suggested. Let me know if anything else are
needed.

** Attachment added: "bug-158176-log-files.tar"
   http://launchpadlibrarian.net/10201974/bug-158176-log-files.tar

-- 
[GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in
https://bugs.launchpad.net/bugs/158176
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 137120] USB mouse not recognized after dehibernation

[Eddy]

Public bug reported:

After rebooting from hibernation, the USB mouse (logitech in this case)
which is consistently detected in the normal boot is no longer
recognized.

Ubuntu: Feisty Fawn
Environment: emachine m5309
Logitech mouse: Wheel mouse M-BD58

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
USB mouse not recognized after dehibernation
https://bugs.launchpad.net/bugs/137120
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 137120] Re: USB mouse not recognized after dehibernation

[Eddy]

** Description changed:

  After rebooting from hibernation, the USB mouse (logitech in this case)
  which is consistently detected in the normal boot is no longer
  recognized.
  
+ Ubuntu: Feisty Fawn
  Environment: emachine m5309
  Logitech mouse: Wheel mouse M-BD58

-- 
USB mouse not recognized after dehibernation
https://bugs.launchpad.net/bugs/137120
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158176] Re: [GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in

[Eddy]

Here are the requested info.

** Attachment added: "lsmod-ndis.tar"
   http://launchpadlibrarian.net/10220777/lsmod-ndis.tar

-- 
[GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in
https://bugs.launchpad.net/bugs/158176
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 158176] Re: [GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in

[Eddy]

Attached is the output log for the command you suggested. It also
contains my current modprobe's blacklist.

This RTL8180 has never worked out of the box with Ubuntu (Feisty). I
always had to use ndiswrapper. It appears that the native module that
comes with it doesn't like it or something. In fact I had to blacklist
it in order to get the ndiswrapper thing to work. Note that the card I
have is the ver 4.0 which is one of those problematic one.

I think the funny thing about this is that the problem happens only when
I leave the card plugged and boot up the machine. If I don't have the
card plugged, the machine boots just fine. And when the boot is complete
and I plugged in the card, everything works just fine as before.
Something seems to be going on during the machine boot up. Also note
that it happens only happen when all the X graphic things are already up
and running. It's right after I supply the password to the key ring
thing so the driver can get the passcode to connect to the network.

I don't think the bug 132657 is a duplicate of this. In that one the
card doesn't work at all. For this one, it works fine but only that boot
time that has problem.


** Attachment added: "modinfo-and-blacklist.tar"
   http://launchpadlibrarian.net/10257020/modinfo-and-blacklist.tar

-- 
[GUTSY]Computer freeze when machine boot up with 8180L wireless plugged in
https://bugs.launchpad.net/bugs/158176
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 548362] Re: nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system

[Eddy]

Same here. 2 nVidia 8600GT SLi cards. Upgraded my 32-bit from Hardy to
Lucid and immediately crashed on reboot. Installed 64-bit from CD on
second hdd (ran into the dmraid problem there, lost all data on my
primary drive, bleh) and every time I install either the 173 or -current
drivers, I get a crash on boot. Believe something wrong with the way it
installs.

Jockey.log:
2010-05-01 00:04:05,619 WARNING: modinfo for module nvidia_current failed: 
ERROR: modinfo: could not find module nvidia_current

-- 
nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system
https://bugs.launchpad.net/bugs/548362
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573557] Re: nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system

[Eddy]

I have the same problem. Just added an old hdd and did a clean install.

Hardware:
Asus P5NE-SLi Motherboard
Intel Q6600 Core2 Quad Processor
4GB DDR Ram
2x nvidia 8600 GT Video cards (linked by SLi cable)

Process was as follows:
1. Installed clean Ubuntu without problems
2. Logged in for first time without a problem
3. Installed the NVidia-Current drivers as provided by the Hardware Drivers 
panel in System --> Administration
4. Reboot and get a blank screen.

At this point I restarted into my regular build and took a look at the log 
files. Kern.log and messages in /var/log show the following lines:
May  2 13:22:01 eddy-testdesktop kernel: [  266.445331] nvidia: module license 
'NVIDIA' taints kernel.
May  2 13:22:01 eddy-testdesktop kernel: [  266.445335] Disabling lock 
debugging due to kernel taint
May  2 13:22:01 eddy-testdesktop kernel: [  267.034199] NVRM: The NVIDIA probe 
routine was not called for 2 device(s).
May  2 13:22:01 eddy-testdesktop kernel: [  267.034203] NVRM: This can occur 
when a driver such as rivafb, nvidiafb or
May  2 13:22:01 eddy-testdesktop kernel: [  267.034204] NVRM: rivatv was loaded 
and obtained ownership of the NVIDIA
May  2 13:22:01 eddy-testdesktop kernel: [  267.034205] NVRM: device(s).
May  2 13:22:01 eddy-testdesktop kernel: [  267.034207] NVRM: Try unloading the 
rivafb, nvidiafb or rivatv kernel module
May  2 13:22:01 eddy-testdesktop kernel: [  267.034208] NVRM: (and/or 
reconfigure your kernel without rivafb/nvidiafb
May  2 13:22:01 eddy-testdesktop kernel: [  267.034209] NVRM: support), then 
try loading the NVIDIA kernel module again.
May  2 13:22:01 eddy-testdesktop kernel: [  267.034211] NVRM: No NVIDIA 
graphics adapter probed!
May  2 13:22:21 eddy-testdesktop kernel: Kernel logging (proc) stopped.

** Attachment added: "kern.log"
   http://launchpadlibrarian.net/47360207/kern.log

-- 
nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system
https://bugs.launchpad.net/bugs/573557
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573557] Re: nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system

[Eddy]

I'm attaching a complete listing of my logs, seeing as I was beat to
creating this bug report. :-)

** Attachment added: "Various logs from the /var/log directory on a fresh 
install - Ubuntu 10.04 64-bit"
   http://launchpadlibrarian.net/47371268/Nvidia_Fail_logs.tar.gz

-- 
nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system
https://bugs.launchpad.net/bugs/573557
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 573557] Re: nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system

[Eddy]

Tested on 64-bit Lucid

Upgraded kernel to linux-image-2.6.32-22-generic. (Restart required)
Installed package Nvidia-current (195.36.65-Oubuntu3). (Restart required)
>From a terminal:
1. sudo service gdm stop
2. sudo nvidia-xconfig --sli=on
3. startx

Drivers load and no further conflicts encountered.

I noticed you can still install the nvidia-current with the .21-generic
kernel. I suggest making a dependency for >= .22

-- 
nvidia-current 195.36.15 + kernel 2.6.32 + dual cards crashes system
https://bugs.launchpad.net/bugs/573557
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 161026] Re: video is playing but can't getting any sound.

[Eddy]

i cant get sound either on movie player

-- 
video is playing but can't getting any sound.
https://bugs.launchpad.net/bugs/161026
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] [NEW] [Dell Inc. Latitude D430] suspend/resume failure intel3945abg

[Eddy]

Public bug reported:

driver causes machines to sometimes fail to resume from suspend and
resulting in the caplocks and num lock key to flash repeatedly.

ProblemType: KernelOops
Annotation: This occured during a previous suspend and prevented it from 
resuming properly.
AplayDevices:
  List of PLAYBACK Hardware Devices 
 card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
Architecture: i386
ArecordDevices:
  List of CAPTURE Hardware Devices 
 card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USERPID ACCESS COMMAND
 /dev/snd/controlC0:  ed 1987 F pulseaudio
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0xefebc000 irq 21'
   Mixer name   : 'SigmaTel STAC9200'
   Components   : 'HDA:83847690,10280201,00102201 
HDA:14f12c06,14f1000f,0010'
   Controls  : 7
   Simple ctrls  : 5
Date: Mon Dec 14 20:50:33 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=/dev/mapper/c10008-swap_1
InterpreterPath: /usr/bin/python2.6
MachineType: Dell Inc. Latitude D430
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcCmdLine: root=/dev/mapper/hostname-root ro quiet splash
ProcCmdline: /usr/bin/python /usr/share/apport/apportcheckresume
ProcEnviron: PATH=(custom, no user)
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.24
SourcePackage: linux
Tags: resume suspend
Title: [Dell Inc. Latitude D430] suspend/resume failure
Uname: Linux 2.6.31-14-generic i686
UserGroups:
 
WpaSupplicantLog:
 
dmi.bios.date: 04/03/2008
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A06
dmi.board.name: 0D704C
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA06:bd04/03/2008:svnDellInc.:pnLatitudeD430:pvr:rvnDellInc.:rn0D704C:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Latitude D430
dmi.sys.vendor: Dell Inc.

** Affects: linux (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: apport-kerneloops i386 resume suspend

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] Re: [Dell Inc. Latitude D430] suspend/resume failure intel3945abg

[Eddy]

** Attachment added: "AlsaDevices.txt"
   http://launchpadlibrarian.net/36829155/AlsaDevices.txt

** Attachment added: "BootDmesg.txt"
   http://launchpadlibrarian.net/36829156/BootDmesg.txt

** Attachment added: "CRDA.txt"
   http://launchpadlibrarian.net/36829157/CRDA.txt

** Attachment added: "Card0.Amixer.values.txt"
   http://launchpadlibrarian.net/36829158/Card0.Amixer.values.txt

** Attachment added: "Card0.Codecs.codec.0.txt"
   http://launchpadlibrarian.net/36829159/Card0.Codecs.codec.0.txt

** Attachment added: "Card0.Codecs.codec.1.txt"
   http://launchpadlibrarian.net/36829160/Card0.Codecs.codec.1.txt

** Attachment added: "CurrentDmesg.txt"
   http://launchpadlibrarian.net/36829161/CurrentDmesg.txt

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/36829162/Dependencies.txt

** Attachment added: "IwConfig.txt"
   http://launchpadlibrarian.net/36829163/IwConfig.txt

** Attachment added: "Lspci.txt"
   http://launchpadlibrarian.net/36829164/Lspci.txt

** Attachment added: "Lsusb.txt"
   http://launchpadlibrarian.net/36829165/Lsusb.txt

** Attachment added: "PciMultimedia.txt"
   http://launchpadlibrarian.net/36829166/PciMultimedia.txt

** Attachment added: "ProcCpuinfo.txt"
   http://launchpadlibrarian.net/36829167/ProcCpuinfo.txt

** Attachment added: "ProcInterrupts.txt"
   http://launchpadlibrarian.net/36829168/ProcInterrupts.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/36829169/ProcMaps.txt

** Attachment added: "ProcModules.txt"
   http://launchpadlibrarian.net/36829170/ProcModules.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/36829171/ProcStatus.txt

** Attachment added: "RfKill.txt"
   http://launchpadlibrarian.net/36829172/RfKill.txt

** Attachment added: "SleepLog.txt"
   http://launchpadlibrarian.net/36829173/SleepLog.txt

** Attachment added: "UdevDb.txt"
   http://launchpadlibrarian.net/36829174/UdevDb.txt

** Attachment added: "UdevLog.txt"
   http://launchpadlibrarian.net/36829175/UdevLog.txt

** Attachment added: "WifiSyslog.txt"
   http://launchpadlibrarian.net/36829176/WifiSyslog.txt

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] apport-collect data

[Eddy]

Architecture: amd64
DistroRelease: Ubuntu 9.10
NonfreeKernelModules: nvidia
Package: devicekit-power 011-1ubuntu1
PackageArchitecture: amd64
ProcEnviron:
 SHELL=/bin/bash
 PATH=(custom, user)
 LANG=en_GB.UTF-8
ProcVersionSignature: Ubuntu 2.6.31-16.53-generic
Uname: Linux 2.6.31-16-generic x86_64
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare vboxusers

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] Dependencies.txt

[Eddy]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/36865494/Dependencies.txt

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] XsessionErrors.txt

[Eddy]

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/36865495/XsessionErrors.txt

** Tags added: apport-collected

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] Re: [Dell Inc. Latitude D430] suspend/resume failure intel3945abg

[Eddy]

*** PLEASE IGNORE THE LAST 3 POSTS, THESE ARE LOGS FROM A DIFFERENT
MACHINE. ***

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 493382] Re: cant set background to space pictures on netbook remix

[Eddy]

I am experiencing the bug exactly as described by B1ackcr0w on an Eeepc
1000HE, with UNR 9.10 latest updates.  However, I find that by selecting
"Fill Screen," I avoid the vertical squashing of the previous wallpaper
when selecting the space one.

Sux because the space one is the coolest looking stock wallpaper :-(
I'm getting by with the grass one in the meantime...

Eddy

-- 
cant set background to space pictures on netbook remix
https://bugs.launchpad.net/bugs/493382
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 476603] Re: Multiple firefox crashes and flash loads CPU to max

[Eddy]

My problem is very similar to the original report of this bug. The web
page that usually causes this is www.manager.co.th. This page contains
some flash animation. Each and everytime I visit this page, I saw
npviewer.bin starting to consume a lot of cpu usage, making the whole
machine super busy. Since I am using a laptop, the fan starts blowing
like crazy pretty quickly after leaving it on the page for a little
while.

Something seems to be running too busily unnecessarily.

-- 
Multiple firefox crashes and flash loads CPU to max
https://bugs.launchpad.net/bugs/476603
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 561958] Re: calibre-mount-helper missing

[Eddy]

I'm with S.Rey. I'd like to see a firm release for Lucid on this one.
Same issue here with my Sony PRS-300.

-- 
calibre-mount-helper missing
https://bugs.launchpad.net/bugs/561958
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 582644] Re: package ure 1.6.0 OOo3.2.0-7ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2

[Eddy]

Wow, this one's annoying. It gave me the same error, so I tried to purge
the OpenOffice.org files as Chris has suggested. Unfortunately, it won't
let me because it says I have to upgrade the package ure in order to
remove the OOo files. Unfortunately, every time I try and upgrade ure,
it gives an error "E: openoffice.org-emailmerge: Package is in a very
bad inconsistent state - you should  reinstall it before attempting a
removal."

Is there a way to remove the files without going through an upgrade?

-- 
package ure 1.6.0 OOo3.2.0-7ubuntu4 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 2
https://bugs.launchpad.net/bugs/582644
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 590228] [NEW] package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2

[Eddy]

Public bug reported:

Binary package hint: nvidia-common

Upon upgrade from linux-image version 2.6.32-22.35 to 2.6.32-22.36, an
error was generated ("E: linux-image-2.6.32-22-generic: subprocess
installed post-installation script returned error exit status 2") and
the system stopped displaying information in windows (all windows came
up without any text, selection boxes, etc). Not even a terminal window
could be brought up. A hard reboot generated an error stating a recovery
of my root drive was necessary (which I allowed it to do). Upon further
inspection I found the error as stated in the auto-generated summary.

This is not the first nvidia-related error, and it may be related to a
previously fixed bug (# 573557) which failed to load the kernel on lucid
systems when there were two or more nvidia video cards installed on the
system.

Running the Update Manager or Synaptic Package Manager generated an
error stating dpkg exited with an error code, and instructing the user
to run "sudo dpkg --configure -a". The tail end is as follows:

Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/dkms 2.6.32-22-generic 
/boot/vmlinuz-2.6.32-22-generic
run-parts: executing /etc/kernel/postinst.d/nvidia-common 2.6.32-22-generic 
/boot/vmlinuz-2.6.32-22-generic
Can't locate Debconf/Db.pm in @INC (@INC contains: /etc/perl 
/usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 
/usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 6.
BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 6.
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2
Failed to process /etc/kernel/postinst.d at 
/var/lib/dpkg/info/linux-image-2.6.32-22-generic.postinst line 1003.
dpkg: error processing linux-image-2.6.32-22-generic (--configure):
 subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
 linux-headers-2.6.32-22-generic
 linux-image-2.6.32-22-generic

ProblemType: Package
DistroRelease: Ubuntu 10.04
Package: linux-image-2.6.32-22-generic 2.6.32-22.36
ProcVersionSignature: Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2
Uname: Linux 2.6.32-22-generic x86_64
NonfreeKernelModules: wl nvidia
AptOrdering:
 linux-headers-generic: Install
 linux-image-2.6.32-22-generic: Configure
 linux-headers-2.6.32-22-generic: Configure
 linux-headers-generic: Configure
Architecture: amd64
Date: Sat Jun  5 14:19:47 2010
ErrorMessage: run-parts: /etc/kernel/postinst.d/nvidia-common exited with 
return code 2
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100429)
SourcePackage: nvidia-common
Title: package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to 
install/upgrade: run-parts: /etc/kernel/postinst.d/nvidia-common exited with 
return code 2

** Affects: nvidia-common (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package lucid

-- 
package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: 
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2
https://bugs.launchpad.net/bugs/590228
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 590228] Re: package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2

[Eddy]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/49742499/Dependencies.txt

** Attachment added: "Df.txt"
   http://launchpadlibrarian.net/49742500/Df.txt

** Attachment added: "Dmesg.txt"
   http://launchpadlibrarian.net/49742501/Dmesg.txt

** Attachment added: "DpkgTerminalLog.txt"
   http://launchpadlibrarian.net/49742502/DpkgTerminalLog.txt

-- 
package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: 
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2
https://bugs.launchpad.net/bugs/590228
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] apport-collect data

[Eddy]

Architecture: i386
DistroRelease: Ubuntu 9.10
Package: devicekit-power 011-1ubuntu1
PackageArchitecture: i386
ProcEnviron:
 SHELL=/bin/bash
 LANG=en_GB.UTF-8
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
Uname: Linux 2.6.31-14-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] Dependencies.txt

[Eddy]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/36914151/Dependencies.txt

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 497071] XsessionErrors.txt

[Eddy]

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/36914154/XsessionErrors.txt

-- 
[Dell Inc. Latitude D430] suspend/resume failure intel3945abg
https://bugs.launchpad.net/bugs/497071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 482991] [NEW] Brasero hangs at "Get Size" process on 64bit Ubuntu 9.1

[Eddy]

Public bug reported:

Binary package hint: brasero

I am using the program to create a data DVD. After putting all the files
for the burning and click the button to start the process, the programs
pops up dialog showing that it's calculating size (I don't know what
it's doing). And it just stays there forever.

ProblemType: Bug
Architecture: amd64
CheckboxSubmission: 158d54d3d6c182200fa4ad941c992d19
CheckboxSystem: e704f33cc0866ff0f0256a33de39ea1c
Date: Sun Nov 15 01:23:32 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/brasero
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release amd64 (20091027)
NonfreeKernelModules: nvidia
Package: brasero 2.28.2-0ubuntu1
ProcEnviron:
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
SourcePackage: brasero
Uname: Linux 2.6.31-14-generic x86_64

** Affects: brasero (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug

-- 
Brasero hangs at "Get Size" process on 64bit Ubuntu 9.1
https://bugs.launchpad.net/bugs/482991
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 482991] Re: Brasero hangs at "Get Size" process on 64bit Ubuntu 9.1

[Eddy]

** Attachment added: "Dependencies.txt"
   http://launchpadlibrarian.net/35712754/Dependencies.txt

** Attachment added: "ProcMaps.txt"
   http://launchpadlibrarian.net/35712755/ProcMaps.txt

** Attachment added: "ProcStatus.txt"
   http://launchpadlibrarian.net/35712756/ProcStatus.txt

** Attachment added: "XsessionErrors.txt"
   http://launchpadlibrarian.net/35712757/XsessionErrors.txt

-- 
Brasero hangs at "Get Size" process on 64bit Ubuntu 9.1
https://bugs.launchpad.net/bugs/482991
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1580217] [NEW] shim-signed only half-configured following ubuntu upgrade to 16.04

[eddy]

Public bug reported:

System was working fine, just upgraded to 16.04. There were errors during 
installation and apt now reports that shim-signed isn't properly installed with 
error
grub-install: error: cannot find EFI directory.


> sudo apt-get install shim-signed
Reading package lists... Done
Building dependency tree   
Reading state information... Done
shim-signed is already the newest version (1.12+0.8-0ubuntu2).
0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] 
Setting up shim-signed (1.12+0.8-0ubuntu2) ...
Installing for x86_64-efi platform.
grub-install: error: cannot find EFI directory.
dpkg: error processing package shim-signed (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 shim-signed
E: Sub-process /usr/bin/dpkg returned an error code (1)


> lsb_release -rd
Description:Ubuntu 16.04 LTS
Release:16.04

> apt-cache policy shim-signed
shim-signed:
  Installed: 1.12+0.8-0ubuntu2
  Candidate: 1.12+0.8-0ubuntu2
  Version table:
 *** 1.12+0.8-0ubuntu2 500
500 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
100 /var/lib/dpkg/status

I've checked a couple of existing shim-signed bugs; they seem to focus on the 
/boot/efi directory being missing, but I have one:
> du /boot/eft
4   /boot/efi/EFI/ubuntu/fw
72  /boot/efi/EFI/ubuntu
76  /boot/efi/EFI
80  /boot/efi/

> df /boot
Filesystem 1K-blocksUsed Available Use% Mounted on
/dev/sdb4   28704764 8583044  18640556  32% /

** Affects: shim-signed (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1580217

Title:
  shim-signed only half-configured following ubuntu upgrade to 16.04

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/shim-signed/+bug/1580217/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1620192] Re: Sound over HDMI is 2x as slow after resuming from standby

[eddy]

Similar problem for me on Intel NUC. Sometimes this problem, sometimes no sound 
at all.
Also, and sometimes, there is no sound on initial boot, which is sometimes 
fixed by going to sound test and starting a test

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1620192

Title:
  Sound over HDMI is 2x as slow after resuming from standby

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1620192/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1580882] Re: [Intel Broadwell HDMI, Digital Out] Sound like half speed after suspend

[eddy]

** Attachment added: "pulseaudio log"
   
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1580882/+attachment/4735656/+files/pulseverbose.log

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1580882

Title:
  [Intel Broadwell HDMI, Digital Out] Sound like half speed after
  suspend

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1580882/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1580882] Re: [Intel Broadwell HDMI, Digital Out] Sound like half speed after suspend

[eddy]

Luke, logs as requested. (This is from an Intel NUC if it makes any
difference).


** Attachment added: "pacmd list-sinks output"
   
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1580882/+attachment/4735655/+files/sinks.txt

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1580882

Title:
  [Intel Broadwell HDMI, Digital Out] Sound like half speed after
  suspend

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1580882/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1387375] [NEW] nvidia-331-uvm 331.89-0ubuntu5: nvidia-331-uvm kernel module failed to build

[Eddy]

Public bug reported:

auto-generated bug during update.

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: nvidia-331-uvm 331.89-0ubuntu5
ProcVersionSignature: Ubuntu 3.13.0-37.64-generic 3.13.11.7
Uname: Linux 3.13.0-37-generic x86_64
NonfreeKernelModules: nvidia wl
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
DKMSKernelVersion: 3.16.0-24-generic
Date: Wed Oct 29 16:45:41 2014
InstallationDate: Installed on 2014-07-17 (104 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
PackageVersion: 331.89-0ubuntu5
SourcePackage: nvidia-graphics-drivers-331
Title: nvidia-331-uvm 331.89-0ubuntu5: nvidia-331-uvm kernel module failed to 
build
UpgradeStatus: Upgraded to utopic on 2014-10-28 (0 days ago)

** Affects: nvidia-graphics-drivers-331 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1387375

Title:
  nvidia-331-uvm 331.89-0ubuntu5: nvidia-331-uvm kernel module failed to
  build

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-331/+bug/1387375/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1246981] Re: Bluetooth mouse fails to re-connect after sleep.

[Eddy]

My bluetooth mouse fails to reconnect when ubuntu restarts...

Just returned to ubuntu from a year or more of Windows, so just finding
my feet again. I have a microsft mouse an bluetooth dongle, It is
showing as paired. However when I restart Ubuntu 14.04 it fails to auto
connect and I have to push a small button on the mouse and switch it on
in the bluetooth dropdown at the same time

** Changed in: bluez (Ubuntu)
   Status: Confirmed => Invalid

** Converted to question:
   https://answers.launchpad.net/ubuntu/+source/bluez/+question/260266

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1246981

Title:
  Bluetooth mouse fails to re-connect after sleep.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1246981/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 947567] [NEW] Indicator applet is invisible after install

[eddy]

Public bug reported:

Just after fresh install of the ubuntu 12.04 and all updates I've installed 
indicator-weather package.
Hovewer no icon appeared on the Unity's top panel or in the Settings -> 
"Startup Applications" menu.
I've launched the weather-indicator from terminal and it appeared on the panel 
and in the  Settings -> "Startup Applications" menu.
After selecting indicator-weather in the "Startup Applications" everything 
works fine.
Not sure that this is a bug, but obviously there should be a more simple way to 
add this indicator to the panel :)
Also similar behaviour had  been exposed by indicator-multiload package, so the 
problem might not be related to the indicator-weather itself, in this case feel 
free to move the report as appropriate.

ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: indicator-weather 11.11.28-0ubuntu1
ProcVersionSignature: Ubuntu 3.2.0-17.27-generic 3.2.6
Uname: Linux 3.2.0-17-generic x86_64
NonfreeKernelModules: wl
ApportVersion: 1.93-0ubuntu2
Architecture: amd64
Date: Tue Mar  6 00:28:29 2012
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120301)
PackageArchitecture: all
ProcEnviron:
 LANGUAGE=en_US:en
 TERM=xterm
 PATH=(custom, user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
SourcePackage: indicator-weather
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: indicator-weather (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 12.04 amd64 apport-bug precise

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/947567

Title:
  Indicator applet is invisible after install

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-weather/+bug/947567/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 947567] Re: Indicator applet is invisible after install

[eddy]

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/947567

Title:
  Indicator applet is invisible after install

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-weather/+bug/947567/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1191193] [NEW] Minimize/Maximize/Close Buttons Inaccessible When Window is Maximized

[Eddy]

Public bug reported:

After performing an update to several system packages, I noticed that my
minimize/maximize/close buttons were inaccessible when the window is
maximized. They would normally appear at the top left of the toolbar.
Now, they appear in the same space as the window name. When the mouse
moves into this area, the buttons and menus (File, Edit, etc.) are
hidden and only the application name displays. This occurs with all
applications that are maximized.

System: Ubuntu 12.04 LTS
System information attached.

dpkg.log for last day's updates:
2013-06-14 08:51:47 upgrade libdbus-1-3 1.4.18-1ubuntu1.3 1.4.18-1ubuntu1.4
2013-06-14 08:51:47 status half-configured libdbus-1-3 1.4.18-1ubuntu1.3
2013-06-14 08:51:47 status unpacked libdbus-1-3 1.4.18-1ubuntu1.3
2013-06-14 08:51:47 status half-installed libdbus-1-3 1.4.18-1ubuntu1.3
2013-06-14 08:51:47 status half-installed libdbus-1-3 1.4.18-1ubuntu1.3
2013-06-14 08:51:47 status unpacked libdbus-1-3 1.4.18-1ubuntu1.4
2013-06-14 08:51:47 status unpacked libdbus-1-3 1.4.18-1ubuntu1.4
2013-06-14 08:51:47 install linux-image-3.2.0-48-generic  3.2.0-48.74
2013-06-14 08:51:47 status half-installed linux-image-3.2.0-48-generic 
3.2.0-48.74
2013-06-14 08:51:51 status unpacked linux-image-3.2.0-48-generic 3.2.0-48.74
2013-06-14 08:51:51 status unpacked linux-image-3.2.0-48-generic 3.2.0-48.74
2013-06-14 08:51:51 upgrade dbus 1.4.18-1ubuntu1.3 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 status half-configured dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status unpacked dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status half-installed dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status triggers-pending ureadahead 0.100.0-12
2013-06-14 08:51:51 status half-installed dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status triggers-pending ureadahead 0.100.0-12
2013-06-14 08:51:51 status triggers-pending man-db 2.6.1-2ubuntu1
2013-06-14 08:51:51 status half-installed dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status half-installed dbus 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status unpacked dbus 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 status unpacked dbus 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 upgrade dbus-x11 1.4.18-1ubuntu1.3 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 status half-configured dbus-x11 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status unpacked dbus-x11 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status half-installed dbus-x11 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status half-installed dbus-x11 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status half-installed dbus-x11 1.4.18-1ubuntu1.3
2013-06-14 08:51:51 status unpacked dbus-x11 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 status unpacked dbus-x11 1.4.18-1ubuntu1.4
2013-06-14 08:51:51 upgrade linux-generic 3.2.0.45.54 3.2.0.48.58
2013-06-14 08:51:51 status half-configured linux-generic 3.2.0.45.54
2013-06-14 08:51:51 status unpacked linux-generic 3.2.0.45.54
2013-06-14 08:51:51 status half-installed linux-generic 3.2.0.45.54
2013-06-14 08:51:51 status half-installed linux-generic 3.2.0.45.54
2013-06-14 08:51:52 status unpacked linux-generic 3.2.0.48.58
2013-06-14 08:51:52 status unpacked linux-generic 3.2.0.48.58
2013-06-14 08:51:52 upgrade linux-image-generic 3.2.0.45.54 3.2.0.48.58
2013-06-14 08:51:52 status half-configured linux-image-generic 3.2.0.45.54
2013-06-14 08:51:52 status unpacked linux-image-generic 3.2.0.45.54
2013-06-14 08:51:52 status half-installed linux-image-generic 3.2.0.45.54
2013-06-14 08:51:52 status half-installed linux-image-generic 3.2.0.45.54
2013-06-14 08:51:52 status unpacked linux-image-generic 3.2.0.48.58
2013-06-14 08:51:52 status unpacked linux-image-generic 3.2.0.48.58
2013-06-14 08:51:52 install linux-headers-3.2.0-48  3.2.0-48.74
2013-06-14 08:51:52 status half-installed linux-headers-3.2.0-48 3.2.0-48.74
2013-06-14 08:51:53 status unpacked linux-headers-3.2.0-48 3.2.0-48.74
2013-06-14 08:51:53 status unpacked linux-headers-3.2.0-48 3.2.0-48.74
2013-06-14 08:51:53 install linux-headers-3.2.0-48-generic  3.2.0-48.74
2013-06-14 08:51:53 status half-installed linux-headers-3.2.0-48-generic 
3.2.0-48.74
2013-06-14 08:51:54 status unpacked linux-headers-3.2.0-48-generic 3.2.0-48.74
2013-06-14 08:51:54 status unpacked linux-headers-3.2.0-48-generic 3.2.0-48.74
2013-06-14 08:51:54 upgrade linux-headers-generic 3.2.0.45.54 3.2.0.48.58
2013-06-14 08:51:54 status half-configured linux-headers-generic 3.2.0.45.54
2013-06-14 08:51:54 status unpacked linux-headers-generic 3.2.0.45.54
2013-06-14 08:51:54 status half-installed linux-headers-generic 3.2.0.45.54
2013-06-14 08:51:54 status half-installed linux-headers-generic 3.2.0.45.54
2013-06-14 08:51:54 status unpacked linux-headers-generic 3.2.0.48.58
2013-06-14 08:51:54 status unpacked linux-headers-generic 3.2.0.48.58
2013-06-14 08:51:54 upgrade linux-libc-dev 3.2.0-45.70 3.2.0-48.74
2013-06-14 08:51:54 status half-configured linux-libc-dev 3.2.0-45.70
2013-06-14 08:51:54 status unpacked linux-libc-dev 3.2.0-45.70
2013-06-14 08:51:54 status half-installed linux-libc-dev 3.2.0

[Bug 1191193] Re: Minimize/Maximize/Close Buttons Inaccessible When Window is Maximized

[Eddy]

Behavior described persisted through soft restart, but resolved itself
through a complete shut-down and power-up.

** Changed in: ubuntu
   Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1191193

Title:
  Minimize/Maximize/Close Buttons Inaccessible When Window is Maximized

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1191193/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 650539] Re: Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, Stellarium, skype, VLC crashes Xserver

[Eddy]

Same problem for me, I'm using maverick 10.10 with nvidia latest beta
drivers and xinerama. Every QT Apps crashes, driving me nuts. Goes away
when I unplug the second monitor and restart X Server. Tried downgrading
to the "stable" nvidia packages but no difference. Switching off
xinerama / unplugging the monitor resolves the issues.

I must add that my second monitor is also rotated 90 degrees. Will try
Kions fix in the mean time.

-- 
Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, 
Stellarium, skype, VLC crashes Xserver
https://bugs.launchpad.net/bugs/650539
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to qt4-x11 in ubuntu.

-- 
kubuntu-bugs mailing list
kubuntu-b...@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs

[Bug 650539] Re: Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, Stellarium, skype, VLC crashes Xserver

[Eddy]

Jérôme, Xinerama is switched on with Xorg.conf. Have you tried deleting
it and creating a fresh one, just in case something is switching it on?

** Summary changed:

- Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, 
Stellarium, skype, VLC crashes Xserver
+ Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, 
Stellarium, skype, Google Earth, VLC crashes Xserver

-- 
Launching QT apps such as SpeedCrunch, keepassX, Lucky Backup, Pencil, 
Stellarium, skype, Google Earth, VLC crashes Xserver
https://bugs.launchpad.net/bugs/650539
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to qt4-x11 in ubuntu.

-- 
kubuntu-bugs mailing list
kubuntu-b...@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs

[Bug 659538] Re: Running VLC crashes Xorg forcing return to login screen; similar behavior with QCAD

[Eddy]

*** This bug is a duplicate of bug 650539 ***
https://bugs.launchpad.net/bugs/650539

** This bug has been marked a duplicate of bug 650539
   Launching QT apps under Xinerama crashes Xorg : affects SpeedCrunch, 
KeePassX, Lucky Backup, Pencil, Stellarium, Skype, Google Earth, VLC, 
Konqueror, VirtualBox, Opera ...
 * You can subscribe to bug 650539 by following this link: 
https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/650539/+subscribe

-- 
Running VLC crashes Xorg forcing return to login screen; similar behavior with 
QCAD
https://bugs.launchpad.net/bugs/659538
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 647845] Re: Xorg crashes whenever running a qt4 application

[Eddy]

*** This bug is a duplicate of bug 650539 ***
https://bugs.launchpad.net/bugs/650539

** This bug has been marked a duplicate of bug 650539
   Launching QT apps under Xinerama crashes Xorg : affects SpeedCrunch, 
KeePassX, Lucky Backup, Pencil, Stellarium, Skype, Google Earth, VLC, 
Konqueror, VirtualBox, Opera ...
 * You can subscribe to bug 650539 by following this link: 
https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/650539/+subscribe

-- 
Xorg crashes whenever running a qt4 application
https://bugs.launchpad.net/bugs/647845
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 660520] Re: X server crash with nvidia driver installed on 2 screens. and then start qemu or virtualbox

[Eddy]

*** This bug is a duplicate of bug 650539 ***
https://bugs.launchpad.net/bugs/650539

** This bug has been marked a duplicate of bug 650539
   Launching QT apps under Xinerama crashes Xorg : affects SpeedCrunch, 
KeePassX, Lucky Backup, Pencil, Stellarium, Skype, Google Earth, VLC, 
Konqueror, VirtualBox, Opera ...
 * You can subscribe to bug 650539 by following this link: 
https://bugs.launchpad.net/ubuntu/+source/qt4-x11/+bug/650539/+subscribe

-- 
X server crash with nvidia driver installed on 2 screens. and then start qemu 
or virtualbox
https://bugs.launchpad.net/bugs/660520
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 659527] Re: xorg server crashes with nvidia-current

[Eddy]

Hi there, I notice you have Xinerama enabled in your XOrg conf, are you
exhibiting the same symptoms  as https://bugs.launchpad.net/bugs/650539
if so please mark as duplicate.

-- 
xorg server crashes with nvidia-current
https://bugs.launchpad.net/bugs/659527
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 632622] Re: X11 Server crushed on virtualbox guest addition installation

[Eddy]

Possible duplicate of https://bugs.launchpad.net/bugs/650539 ?

-- 
X11 Server crushed on virtualbox guest addition installation
https://bugs.launchpad.net/bugs/632622
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 590228] Re: package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2

[Eddy]

Sorry, I should have posted this right after I figured it out. A couple
of weeks ago, I started going through things in a little more detail.

First error: Can't locate Debconf/Db.pm in @INC (@INC contains:
/etc/perl /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1
/usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10
/usr/local/lib/site_perl .) at /usr/share/debconf/frontend line 6.

I checked the locations listed (/etc/perl for instance), and I couldn't
find a Debconf/Db.pm folder/file. After doing a complete search of the
drive, I found the file and created a sym-link to it in the
/usr/local/lib/perl/5.10.1 folder. I attempted to re-install the faulty
package, and it moved on to another error on the next line. At least it
made progress, but it led to me doubt a whole list of packages.

Through trial and error, I found my system to essentially have a faulty
debconf package. I downloaded the current package from
http://packages.ubuntu.com/lucid/debconf and tried to re-install. This
time, everything went well.

I wound up using dpkg due to synaptic and apt-get insisting that I fix
my broken packages first.

Again, sorry I didn't post right after I figured it out.

-- 
package linux-image-2.6.32-22-generic 2.6.32-22.36 failed to install/upgrade: 
run-parts: /etc/kernel/postinst.d/nvidia-common exited with return code 2
https://bugs.launchpad.net/bugs/590228
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 318942] Re: no sound from speakers on HP Mini 1000 (hda-intel, IDT 92HD75B2X5)

[Todd Eddy]

I have an HP mini 1000 with Jaunty UNR on it.  Arnaud's fix works
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/318942/comments/44)
but the alsa settings aren't saved so I need to unmute the speakers on
every boot.  I've tried running `sudo alsactl store` and that didn't
solve it.  Tried Maurico's post
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/318942/comments/63)
and same symptoms.  audio works but I have to unmute on reboot.  the
blue keys work fine though.

-- 
no sound from speakers on HP Mini 1000 (hda-intel, IDT 92HD75B2X5)
https://bugs.launchpad.net/bugs/318942
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 285073] [NEW] adept_manager 'hangs' when entering lib in search window

[Eddy Kivits]

Public bug reported:

Binary package hint: adept-manager

I am using Kubuntu 8.10 beta.

When entering lib in the search window of the adept_manager it hangs.
Adept manager version is: Version 3.0 Beta 4 (Sheldon) using KDE 4.1.2

** Affects: adept (Ubuntu)
 Importance: Undecided
 Status: New

-- 
adept_manager 'hangs' when entering lib in search window
https://bugs.launchpad.net/bugs/285073
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 257724] Re: vnc4server startup script error

[Eddy Mulyono]

Test in intrepid:
0. sudo apt-get install vnc4server
1. vncserver
2. vncserver -kill :1
3. edit ~/.vnc/xstartup to be:
  unset SESSION_MANAGER
  exec /etc/X11/xinit/xinitrc
4. vncserver
5. Open "Remote Desktop Viewer"
6. "Connect" to "localhost:13"

Expected:
GNOME session starts.

Bug:
Nothing starts.

I think the bug is in xinit. I checked Fedora 9, and they have xinitrc
set to 755.

I modified xinit-1.0.9-2 to, at postinst, chmod o+x xinitrc.

It seems to fix it for me.

** Attachment added: "debdiff xinit_1.0.9-2 xinit_1.0.9-2ubuntu1~ppa1"
   http://launchpadlibrarian.net/18656349/deb.diff

-- 
vnc4server startup script error
https://bugs.launchpad.net/bugs/257724
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 207768] Re: no_proxy environment dropped when calling synaptic

[Eddy Mulyono]

We'll probably have to patch env.c to include no_proxy in
initial_keepenv_table.

I'll see if I can cook up a patch.

-- 
no_proxy environment dropped when calling synaptic
https://bugs.launchpad.net/bugs/207768
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

Works now for ubuntu.

I wouldn't mind porting this patch (if there's any extra work at all) to
Debian sid, but can someone give me pointers as to what to do? (or what
docs to read..)



** Attachment added: "new debdiff against 1:1.5.4.3-1ubuntu2"
   http://launchpadlibrarian.net/15865514/deb.diff

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 281088] Re: kded in KDE 4.1.2 crashesh at startup

[Eddy Kivits]

I have exactly the same problem. I have Kubuntu kde 4.1.2 installed.

There is also another bug (#191804) which pointed me to a temporarily
solution (at least for me). TBug  #191804 talks about Qt (last.fm). This
reminds that I updated amarok (which is also using (last.fm)) to the
latest beta. During login amarok is started. I disabled amarok during
startup and the crash is gone when I login.

-- 
kded in KDE 4.1.2 crashesh at startup
https://bugs.launchpad.net/bugs/281088
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

@Scott: 
> Are you close to a final debdiff for this?

If I understand correctly, I should debdiff python-
django_0.96.2-1ubuntu2 against my python-django_1.0-1ubuntu1~ppa3.

Am I correct? (The deb.diff is 15.2 MB. Should I upload it anyway?)

I didn't get much further than https://bugs.launchpad.net/ubuntu/+source
/python-django/+bug/264191/comments/24

It runs most tests in the test suite, minus some tests that require
networking, and the FileSaveRaceConditionTest.

According to James Bennet, that last item is not a Django bug. Getting
it "fixed" will require me to probe into pbuilder/chroot/soyuz/buildbot-
land, which I don't think I'll be able to finish before Intrepid's
launch.

Other than that, though, I've been using my 1.0-1ubuntu1~ppa3, and it
works fine for me.

> Please remember to do it as a merge from the current Ubuntu version to
that the Ubuntu change history is preserved.

I might need some help with merging the Ubuntu changelog with the Debian
changelog. Which entries from Debian changelog should I include? Which
entries should I not include?

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 302724] Re: nscd crashes

[Todd Eddy]

I can confirm this happens to me as well.  right now I just have a cron
job that restarts nscd every half hour.

I have tried playing with nsswitch settings as well as nscd.conf.  Been
trying to figure this out for a while.  Let me know if any other info
could be useful

The log output:
31636: handle_request: request received (Version = 2) from PID 652
31636:  GETHOSTBYNAME (ns1.pchdns.com)
31636: Reloading "teddy" in group cache!
31636: remove INITGROUPS entry "root"
nscd: mem.c:417: gc: Assertion `off_alloc == off_allocend' failed.
Aborted

# grep '^[^#]' /etc/ldap.conf
base dc=XX,dc=com
uri ldaps://ldap1.XX.com:636/ ldaps://ldap2.XX.com:636/
ldap_version 3
rootbinddn cn=admin,dc=XX,dc=com
bind_policy soft
pam_groupdn cn=XXX,ou=Group,dc=XX,dc=com
pam_member_attribute memberUid
pam_password md5
tls_checkpeer no
nss_reconnect_tries 1
nss_reconnect_sleeptime 1
nss_reconnect_maxsleeptime 8
nss_reconnect_maxconntries 2

-- 
nscd crashes
https://bugs.launchpad.net/bugs/302724
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 225546] Re: gdmsetup does not choose selected theme

[Eddy Mulyono]

Same here.

Weirdly enough, if I run gdmsetup afterward, and selected the same
option (Human List theme) for the second time, gdm will behave properly.

-- 
gdmsetup does not choose selected theme
https://bugs.launchpad.net/bugs/225546
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 159086] Re: libwnck stops updating window information after xrandr

[Eddy Mulyono]

I still have the same problem in Hardy.

Another workaround (other than `killall gnome-panel` and/or `compiz --replace`) 
is:
1. Right-click on panel
2. Choose "Properties"
3. Toggle "Orientation" (e.g., if it's set to "Bottom", choose "Top" (let 
instant apply happen), and choose "Bottom" again).

-- 
libwnck stops updating window information after xrandr
https://bugs.launchpad.net/bugs/159086
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 350024] [NEW] intrepid's nagios3 depends on non-existent libperl5.8

[Eddy Mulyono]

Public bug reported:

intrepid's nagios3-3.0.6-2 depends on non-existent libperl5.8 (intrepid
only has libperl5.10)

When I try to install nagios3 via Synaptic, I got:

nagios3:
  Depends: libperl5.8 (>=5.8.8) but it is not installable

** Affects: nagios3 (Ubuntu)
 Importance: Undecided
 Status: New

-- 
intrepid's nagios3 depends on non-existent libperl5.8
https://bugs.launchpad.net/bugs/350024
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 350024] Re: intrepid's nagios3 depends on non-existent libperl5.8

[Eddy Mulyono]

nagios3:
  Installed: (none)
  Candidate: 3.0.6-2
  Version table:
 3.0.6-2 0
500 http://apt.brightbox.net hardy/main Packages
 3.0.2-1ubuntu1.1 0
500 http://mirrors.us.kernel.org intrepid-updates/main Packages
500 http://mirrors.us.kernel.org intrepid-security/main Packages
 3.0.2-1ubuntu1 0
500 http://mirrors.us.kernel.org intrepid/main Packages

Apparently, I forgot that I was using other (hardy) repos. My mistake.
Feel free to close this bug.

** Changed in: nagios3 (Ubuntu)
   Status: Incomplete => Invalid

-- 
intrepid's nagios3 depends on non-existent libperl5.8
https://bugs.launchpad.net/bugs/350024
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] [NEW] python-django FFe for 1.0

[Eddy Mulyono]

Public bug reported:

Binary package hint: python-django

> state the reason why you feel it is necessary

* Django 1.0 is slated for 1.0 within a week (around september 6-7, 2008).
  Because intrepid is "Supported until April 2010", it's better to carry 1.0 
rather than the 0.96 series.

* Fixes http://www.djangoproject.com/weblog/2008/sep/02/security/

* Debian unstable has 1.0~beta2+ds-1 . There shouldn't be much more
packaging surprises between 1.0~beta2 and 1.0.

** Affects: python-django (Ubuntu)
 Importance: Undecided
 Status: New

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

> OK. Who can test this package?

In my PPA , I packaged
1.0-0ubuntu1~ppa1 using 1.0~beta2+ds-1 packaging information, adding
some instructions to run Django's testsuite.

1.0 passes almost all the tests:
https://launchpad.net/~eddymul/+archive/+build/708241

In order for the testsuite to run in the PPA builder, I had to disable
tests that needs network connectivity in
tests.regressiontests.forms.fields.

I also had problem with
tests.regressiontests.file_storage.tests.FileSaveRaceConditionTest in my
computer, so I disabled that in my build. In my next PPA build, I will
to enable this FileSaveRaceConditionTest.

http://launchpadlibrarian.net/17282477/python-
django_1.0-0ubuntu1%7Eppa1.diff.gz

I will:
1. port my test-suite rules and patches to Debian unstable's 1.0-1
2. enable FileSaveRaceConditionTest
3. report back my testing results

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

> Eddy, I know we have some ubuntu changes on this package, we have to
check if there are still revelant. I know that we desactivated testsuite
for the reason you have given. I had no problem with FileSaveRaceCon
myself. What kind of problem did you had?

I think my problem is mostly bad hardware that overheated once in a
while.   :(

> I will:
> 1. port my test-suite rules and patches to Debian unstable's 1.0-1
> 2. enable FileSaveRaceConditionTest
> 3. report back my testing results

FileSaveRaceConditionTest passes just fine under Soyuz according to

http://launchpadlibrarian.net/17299076/buildlog_ubuntu-intrepid-i386
.python-django_1.0-1ubuntu1~ppa1_FULLYBUILT.txt.gz

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

> @Eddy: would you mind to prepare a debdiff from Debian Unstable to
prepare a merge for Intrepid?

@Lionel: I assume you want me to `debdiff debian/python-django_1.0-1.dsc
ubuntu/python-django_1.0-1ubuntu1~ppa1.dsc`. If so, you can find it
attached to this comment.

** Attachment added: "debdiff debian/python-django_1.0-1.dsc 
ubuntu/python-django_1.0-1ubuntu1~ppa1.dsc"
   http://launchpadlibrarian.net/17330794/deb.diff

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

Django automatically skips some tests from its testsuite if it's missing
some dependencies required to run them.

This next debdiff runs more tests by pulling some packages into Build-
Depends-Indep

(I just uploaded it to my PPA, and will have to wait a bit for build
logs. Should be fine, but I'll report if there's any breakage).

** Attachment added: "debdiff debian/python-django_1.0-1.dsc 
ubuntu/python-django_1.0-1ubuntu1~ppa2.dsc"
   http://launchpadlibrarian.net/17346653/deb.diff

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 264191] Re: python-django FFe for 1.0

[Eddy Mulyono]

@Scott: I think that post refers to a Django app, not Django itself. So,
we probably don't want those patches.

FileSaveRaceConditionTest is giving me trouble. Sometimes it passes,
sometimes it doesn't (in both my local pbuilder and LP Soyuz). Django
upstream folks are also having problem with it with their BuildBot. I
choose to remove this test for now.

But I think it's safe to say that unstable's python-django_1.0-1 is
stable enough to sync from. Attached is my "run most tests" patch
against it.

** Attachment added: "debdiff debian/python-django_1.0-1.dsc 
ubuntu/python-django_1.0-1ubuntu1~ppa3.dsc"
   http://launchpadlibrarian.net/17434500/deb.diff

-- 
python-django FFe for 1.0
https://bugs.launchpad.net/bugs/264191
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 406657] [NEW] Application buttons can't be dragged from Applications menu to top Panel.

[Josh Eddy]

Public bug reported:

Bug found in Ubuntu 9.10 Karmic Alpha 3

When attempting to drag the "Terminal" application icon from the
Applications menu to the top Panel, the icon flashes and then
disappears, instead of following the mouse up to the Panel and staying
there.  To install the icon to the panel, I had to right-click on the
panel, select "Add to Panel", and select the application from the menu.
This drag-and-drop selection worked in all of the previous releases.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
Application buttons can't be dragged from Applications menu to top Panel.
https://bugs.launchpad.net/bugs/406657
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 55480] grub menu changed after kernel-update

[Mr. Eddy]

Public bug reported:

Binary package hint: grub

After doing a kernelupdate my manually configure menu.lst file is reset
to the default settings. My windows partion is normally the first boot
option. Every time I do a kernal update, I need to change my menu.lst.
Setting back windows as first boot option and removing the older kernels
out of the list. Isn't there a possibility to prevent this changes?

** Affects: grub (Ubuntu)
 Importance: Untriaged
 Status: Unconfirmed

-- 
grub menu changed after kernel-update
https://launchpad.net/bugs/55480

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 62679] Re: live cd stops at initramfs

[Eddy Pronk]

output last command:

(initramfs) mountroot
+ mountroot
+ exec
+ exec
+ exec
+ exec
+ cp casper.log /root/var/log
cp: unable to open '/root/var/log/': No such file or directory

-- 
live cd stops at initramfs
https://launchpad.net/bugs/62679

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 62679] Re: live cd stops at initramfs

[Eddy Pronk]

The mount fails, but how to debug this.

In 5.10 it mount the cdrom as /dev/cdroms/cdrom0
Uniform CD-ROM driver Revision 3.20

/casper.log :

mount: Mounting /cdrom on /root/cdrom failed: Invalid argument
chroot: cannot execute debconf-communicate: No such file or directory
chroot: cannot execute /usr/lib/user-setup/user-setup-apply: No such file or 
directory
chroot: cannot execute debconf-communicate: No such file or directory
/scripts/casper-bottom/10adduser: /scripts/casper-bottom/10adduser: 48: cannot 
create /root/etc/environment: Directory nonexistent
/scripts/casper-bottom/12fstab: /scripts/casper-bottom/12fstab: 25: cannot 
create /root/etc/fstab: Directory nonexistent
grep: /root/usr/share/i18n/SUPPORTED: No such file or directory
/scripts/casper-bottom/14locales: /scripts/casper-bottom/14locales: 54: cannot 
create : Directory nonexistent
chroot: cannot execute /usr/sbin/locale-gen: No such file or directory
chroot: cannot execute [: No such file or directory
chroot: cannot execute [: No such file or directory
chroot: cannot execute /usr/bin/which: No such file or directory
/scripts/casper-bottom/18hostname: /scripts/casper-bottom/18hostname: 23: 
cannot create /root/etc/hostname: Directory nonexistent
/scripts/casper-bottom/18hostname: /scripts/casper-bottom/18hostname: 25: 
cannot create /root/etc/hosts: Directory nonexistent
chroot: cannot execute /usr/sbin/install-keymap: No such file or directory
chroot: cannot execute debconf-communicate: No such file or directory
chroot: cannot execute debconf-communicate: No such file or directory
mount: Mounting /sys on /root/sys failed: No such file or directory
mount: Mounting /proc on /root/proc failed: No such file or directory
chroot: cannot execute debconf-communicate: No such file or directory
grep: /root/usr/share/i18n/SUPPORTED: No such file or directory
/bin/casper-reconfigure: package 'xserver-xorg' is not installed
umount: Couldn't umount /root/sys: No such file or directory
umount: Couldn't umount /root/proc: No such file or directory
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 25: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 40: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 49: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 49: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 49: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/23networking: /scripts/casper-bottom/23networking: 49: 
cannot create /root/etc/network/interfaces: Directory nonexistent
/scripts/casper-bottom/30accessibility: /scripts/casper-bottom/30accessibility: 
55: Syntax error: "fi" unexpected (expecting ";;")

-- 
live cd stops at initramfs
https://launchpad.net/bugs/62679

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Re: [Bug 62679] Re: live cd stops at initramfs

[Eddy Pronk]

> Sorry takes me time to answer/follow up on that.
>
> downloaded the official release version and the same happens
>
> B ut I have just found out that by booting the live cd with acpi=off the
> problem does not occur.
> will do for me.
>
> James

Thanks. I'll try it.
As soon as you get back on it and you want me to try something feel free
to contact me.

Eddy

-- 
live cd stops at initramfs
https://launchpad.net/bugs/62679

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 135358] Re: vmware-player not installable

[Eddy Mulyono]

I am having the same problems as beavis: after I installed vmware-
player, synaptic kept telling that I need to update it to the same
version.

-- 
vmware-player not installable
https://bugs.launchpad.net/bugs/135358
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 110838] Re: Oolite runs very slowly

[Eddy Petrisor]

what does 'glxinfo | grep -i direct' say?

-- 
Oolite runs very slowly
https://bugs.launchpad.net/bugs/110838
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

steps to reproduce:
1. apt-get install emacs git-core
2. open emacs
3. M-x git-status

expected: (emacs prompts for a path, then) magic happens

observed: no such command.

new patch fixes this issue in hardy.

** Attachment added: "debdiff patch for hardy"
   http://launchpadlibrarian.net/13477597/deb.diff

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

PPA was able to succesfully build the package. Results at
http://ppa.launchpad.net/eddymul/ubuntu

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

Upstream prefers not to depend on debhelper. I'm "inlining" some of the
debhelper commands, but currently, this only works for emacs (vs. other
emacsen).

Resulting package is in my PPA version 1.5.4.3-1ubuntu3~ppa2. Works for
emacs.

** Attachment added: "deb.diff"
   http://launchpadlibrarian.net/13666395/deb.diff

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

Apparently, my patch in comment 6 doesn't work in a fresh Hardy install.
:p

I will delete 1.5.4.3-1ubuntu3~ppa2 and rebuild with debhelper for now,
while I learn to unravel debhelper's wonders to satisfy upstream's
request.

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 108057] Re: Romanian layout with ș and ț in it is not among the options in the GUI

[Eddy Petrisor]

Hey, hey

I have a patch for the presentation issue. I used the names
"Programmers", "Standard", "Programmers (cedilla)", "Standard (cedilla)"
resulting in a dialog like the one in the attached image.

** Attachment added: "gnome's layout choices now"
   
http://launchpadlibrarian.net/8765731/Captur%C4%83%20ecran%20-%20Alege%C5%A3i%20un%20aranjament.png

-- 
Romanian  layout with ș and ț in it is not among the options in the GUI
https://bugs.launchpad.net/bugs/108057
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 108057] Re: Romanian layout with ș and ț in it is not among the options in the GUI

[Eddy Petrisor]

The brother Debian bug of this bug is 436993

http://bugs.debian.org/436993

The patch I made is available there.

-- 
Romanian  layout with ș and ț in it is not among the options in the GUI
https://bugs.launchpad.net/bugs/108057
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] [NEW] git-core doesn't install bindings for emacsen

[Eddy Mulyono]

Public bug reported:

Binary package hint: git-core

git distributes contrib/emacs/*.el

These files ended up in /usr/share/doc/*

Probably we can have debian/rules perform dh_installemacsen?

** Affects: git-core (Ubuntu)
 Importance: Undecided
 Status: New

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 188218] Re: git-core doesn't install bindings for emacsen

[Eddy Mulyono]

interdiff patch for gutsy.

Will work on hardy next.

** Attachment added: "git-core_gutsy_inter.diff"
   http://launchpadlibrarian.net/11748076/git-core_gutsy_inter.diff

-- 
git-core doesn't install bindings for emacsen
https://bugs.launchpad.net/bugs/188218
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 162890] Re: comint-watch-for-password-prompt does not catch sudo prompt

[Eddy Mulyono]

Chris: Thanks for the snippet. It works for me.

Romain: Are you referring to the following?

http://codebrowse.launchpad.net/~ubuntu-
elisp/emacs/ubuntu/annotate/mwolson%40gnu.org-20080109032759-40ngyxjmy8yeskdv?start_revid=mwolson%40gnu.org-20080109043431-8u8qawud84xqj33m&file_id=fixcomintsudo.diff-20080109031905-xafg6j528hm2cgwo-1

-- 
comint-watch-for-password-prompt does not catch sudo prompt
https://bugs.launchpad.net/bugs/162890
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 136872] Re: (gutsy) oolite missing menu icon

[Eddy Petrisor]

Thanks for the patch.

But removing the encoding specification from the desktop file is broken.
I understand the removal of the empty GenericName field.

-- 
(gutsy) oolite missing menu icon
https://bugs.launchpad.net/bugs/136872
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 136872] Re: (gutsy) oolite missing menu icon

[Eddy Petrisor]

Did *you* look at your debdiff?

http://launchpadlibrarian.net/9099163/oolite_1.65-5ubuntu1.debdiff.debdiff

Your patch alters debian/patches/oolite.desktop...

Also modifying oolite-1.65/debian/oolite.install wasn't necessary, since
there is a dh_installdekstop line in the debian/rules file. Simply
modifying the debian/dirs file should have been enough.

-- 
(gutsy) oolite missing menu icon
https://bugs.launchpad.net/bugs/136872
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 136872] Re: (gutsy) oolite missing menu icon

[Eddy Petrisor]

Err, sorry, the install was necessary ... apparently dh_desktop does not
*yet* support installation of files.

-- 
(gutsy) oolite missing menu icon
https://bugs.launchpad.net/bugs/136872
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 157445] Re: No focus in revelation panel applet.

[Eddy Mulyono]

*** This bug is a duplicate of bug 118812 ***
https://bugs.launchpad.net/bugs/118812

** This bug has been marked a duplicate of bug 118812
   revelation account search

-- 
No focus in revelation panel applet.
https://bugs.launchpad.net/bugs/157445
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 165219] Re: Unexpected behavior of lame encoding plugin

[Eddy Pronk]

I noticed the same from python-gst. I played the mp3 with with xmms and
noticed the bitrate never jumps to 224kbps or higher)

from python:
encoder = gst.element_factory_make('lame', 'mp3-encoder')
encoder.set_property('preset', 1001) # standard

-- 
Unexpected behavior of lame encoding plugin
https://bugs.launchpad.net/bugs/165219
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 165219] Re: Unexpected behavior of lame encoding plugin

[Eddy Pronk]

see http://bugzilla.gnome.org/show_bug.cgi?id=498004

-- 
Unexpected behavior of lame encoding plugin
https://bugs.launchpad.net/bugs/165219
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 110838] Re: Oolite runs very slowly

[Eddy Petrisor]

I have forwarded your report upstream:
https://developer.berlios.de/bugs/?func=detailbug&bug_id=12619&group_id=3577

-- 
Oolite runs very slowly
https://bugs.launchpad.net/bugs/110838
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs