Hi Bryan, On Tue Nov 18, 2025 at 10:33 AM CET, Bryan O'Donoghue wrote: > On 17/11/2025 12:53, Konrad Dybcio wrote: >> On 11/16/25 3:30 PM, Bryan O'Donoghue wrote: >>> On 14/11/2025 15:59, Luca Weiss wrote: >>>> On Fri Nov 14, 2025 at 4:51 PM CET, Bryan O'Donoghue wrote: >>>>> On 14/11/2025 11:15, Luca Weiss wrote: >>>>>> Add bindings, driver and dts to support the Camera Subsystem on the >>>>>> SM6350 SoC. >>>>>> >>>>>> These patches were tested on a Fairphone 4 smartphone with WIP sensor >>>>>> drivers (Sony IMX576 and IMX582), the camera pipeline works properly as >>>>>> far as I can tell. >>>>>> >>>>>> Though when stopping the camera stream, the following clock warning >>>>>> appears in dmesg. But it does not interfere with any functionality, >>>>>> starting and stopping the stream works and debugcc is showing 426.4 MHz >>>>>> while the clock is on, and 'off' while it's off. >>>>>> >>>>>> Any suggestion how to fix this, is appreciated. >>>>>> >>>>>> [ 5738.590980] ------------[ cut here ]------------ >>>>>> [ 5738.591009] gcc_camera_axi_clk status stuck at 'on' >>>>>> [ 5738.591049] WARNING: CPU: 0 PID: 6918 at >>>>>> drivers/clk/qcom/clk-branch.c:87 clk_branch_toggle+0x170/0x190 >>>>> >>>>> Do you have a full and complete kernel tree we could look at here ? >>>> >>>> Sure, this branch has everything in: >>>> >>>> https://github.com/sm6350-mainline/linux/tree/sm6350-6.17.y/ >>>> >>>> For further refence, at least two other people have tested this branch >>>> in postmarketOS, nothing particularly exciting to report from there, >>>> apart from that the sdm-skin-thermal thermal zone (thermistor right next >>>> to SoC) is currently configured with 55 degC as critical trip, which is >>>> quickly achieved when starting a video recording, but that's not really >>>> an issue with camss, but will need some tweaking regardless. >>>> >>>> https://gitlab.postmarketos.org/postmarketOS/pmaports/-/merge_requests/7281 >>> >>> diff --git a/drivers/clk/qcom/gcc-sm6350.c b/drivers/clk/qcom/gcc-sm6350.c >>> index a4d6dff9d0f7f..229629ef82809 100644 >>> --- a/drivers/clk/qcom/gcc-sm6350.c >>> +++ b/drivers/clk/qcom/gcc-sm6350.c >>> @@ -908,9 +908,7 @@ static struct clk_branch gcc_camera_ahb_clk = { >>> >>> static struct clk_branch gcc_camera_axi_clk = { >>> .halt_reg = 0x17018, >>> - .halt_check = BRANCH_HALT, >>> - .hwcg_reg = 0x17018, >>> - .hwcg_bit = 1, >> >> No reason to drop the hwcg description >> >>> + .halt_check = BRANCH_VOTED, >> >> It'd be useful to explain why we should ignore the hw feedback in this case >> >>> .clkr = { >>> .enable_reg = 0x17018, >>> .enable_mask = BIT(0), >> >> Konrad > > vfe170 is what we have on sdm845 > > So I'm just asking Luca to try the sdm845 method of waggling this clock > since what we have doesn't work.
Yes, your change to gcc-sm6350.c does remove the warning and everything seems to work as expected. Opening and closing the plasma-camera application, switching between cameras works without any visible issues. Regards Luca > > --- > bod
