Add a node for the CAMSS on the SM6350 SoC. Signed-off-by: Luca Weiss <[email protected]> --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 165 +++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi
b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index ca6f65e8e267..2784b4541771 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -2123,6 +2123,171 @@ cci1_i2c0: i2c-bus@0 {
/* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but
unused downstream */
};
+ camss: isp@acb3000 {
+ compatible = "qcom,sm6350-camss";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc1000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0ac65000 0x0 0x1000>,
+ <0x0 0x0ac66000 0x0 0x1000>,
+ <0x0 0x0ac67000 0x0 0x1000>,
+ <0x0 0x0ac68000 0x0 0x1000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acbd000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite";
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_AXI_CLK>,
+ <&camcc CAMCC_SOC_AHB_CLK>,
+ <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CORE_AHB_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_CLK>,
+ <&camcc CAMCC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_CSID_CLK>;
+ clock-names = "cam_ahb_clk",
+ "cam_axi",
+ "soc_ahb",
+ "camnoc_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "slow_ahb_src",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite";
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0
QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG
QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF
QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0
QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF
QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0
QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_ICP
QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0
QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc",
+ "sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x820 0xc0>,
+ <&apps_smmu 0x840 0x0>,
+ <&apps_smmu 0x860 0xc0>,
+ <&apps_smmu 0x880 0x0>;
+
+ power-domains = <&camcc TITAN_TOP_GDSC>,
+ <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>;
+ power-domain-names = "top",
+ "ife0",
+ "ife1",
+ "ife2";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+ };
+ };
+
camcc: clock-controller@ad00000 {
compatible = "qcom,sm6350-camcc";
reg = <0x0 0x0ad00000 0x0 0x16000>;
--
2.51.2
