On 14/11/2025 11:15, Luca Weiss wrote:
Add bindings, driver and dts to support the Camera Subsystem on the
SM6350 SoC.
These patches were tested on a Fairphone 4 smartphone with WIP sensor
drivers (Sony IMX576 and IMX582), the camera pipeline works properly as
far as I can tell.
Though when stopping the camera stream, the following clock warning
appears in dmesg. But it does not interfere with any functionality,
starting and stopping the stream works and debugcc is showing 426.4 MHz
while the clock is on, and 'off' while it's off.
Any suggestion how to fix this, is appreciated.
[ 5738.590980] ------------[ cut here ]------------
[ 5738.591009] gcc_camera_axi_clk status stuck at 'on'
[ 5738.591049] WARNING: CPU: 0 PID: 6918 at drivers/clk/qcom/clk-branch.c:87
clk_branch_toggle+0x170/0x190
Do you have a full and complete kernel tree we could look at here ?
---
bod
