I am not aware of any notable backbone-ready router platform (something that speaks BGP+OSPF+MPLS, takes full tables and can carry multiple VRFs) that does layer-4 hashing in ASICs/hardware... Routers are not intended to be load balancers.
It's not a microwave problem, the same issue is seen if you portchannel two 1Gbps fiber connections between routers. On Fri, Apr 1, 2016 at 3:26 PM, Josh Reynolds <[email protected]> wrote: > That's not exactly true, it depends on the hashing method. If your > equipment can do Layer 4 hashing, then you absolutely can maximize the > aggregate throughput via single stream. > > Sadly, LAG/LACP as a whole like this sucks terribly for wireless/microwave. > > On Fri, Apr 1, 2016 at 5:05 PM, Eric Kuhnke <[email protected]> wrote: > > Looking at the 2200FX it has regular SFP ports, so at 2Gbps (500 MHz > channel > > 32QAM?) FDD, you can only achieve 2Gbps by doing an 802.3ad between two > > routers. In which case no single customer data stream will exeed 1Gbps. > Not > > quite the same thing as having a radio with a SFP+ 10GbE interface. > > > > That said it will probably be less costly than the equivalent options > from > > Bridgewave, E-Band or perhaps SIAE. > > > > On Fri, Apr 1, 2016 at 2:59 PM, Peter Kranz <[email protected]> > wrote: > >> > >> Siklu has both a high power and low power 2Gbps radio now. The high > power > >> unit is not on their website but due next month and its really much more > >> than the cheap one honestly. > >> > >> > >> > >> Peter Kranz > >> www.UnwiredLtd.com > >> Desk: 510-868-1614 x100 > >> Mobile: 510-207-0000 > >> [email protected] > >> > >> > >> > >> From: Af [mailto:[email protected]] On Behalf Of Eric Kuhnke > >> Sent: Wednesday, March 30, 2016 1:55 PM > >> To: [email protected] > >> Subject: Re: [AFMUG] Russians made a 10 Gbps radio? > >> > >> > >> > >> Without violating any manufacturer's NDA, this is the tip of an iceberg, > >> the Russians just happen to be publishing info a tiny bit earlier than > the > >> other 80 GHz radio manufacturers. There are 10GbE 256QAM FDD radios in > >> development and field testing from all of the significant players in the > >> industry. > >> > >> I would expect the 'new' 5Gbps to 10Gbps radios to ship in the US at a > >> price point under $20k per link including antennas, which will occupy > the > >> price tier previously occupied by the 1Gbps high-powered 80 GHz stuff > that > >> began shipping 3.5 to 4 years ago. Then you have the lower powered less > >> expensive 80 GHz stuff like Siklu which has a max Tx power of +8 or +10 > and > >> will come down further from its already-low price under $10k/link. > >> > >> > >> > >> On Wed, Mar 30, 2016 at 9:07 AM, Mike Hammett <[email protected]> wrote: > >> > >> Putting 2 and 2 together, from a FB post, it looks like they're 20k GBP > >> per link. That sounds simply awesome if they are. > >> > >> > >> > >> ----- > >> Mike Hammett > >> Intelligent Computing Solutions > >> > >> Midwest Internet Exchange > >> > >> The Brothers WISP > >> > >> > >> > >> ________________________________ > >> > >> From: "Eric Kuhnke" <[email protected]> > >> To: [email protected] > >> Sent: Monday, March 28, 2016 5:42:25 PM > >> Subject: [AFMUG] Russians made a 10 Gbps radio? > >> > >> http://www.elva-1.com/news_events/a40107 > >> > >> http://www.elva-1.com/products/a40106 > >> > >> http://www.elva-1.com/data/files/Datasheets/2016_02_24_PPC-10G.pdf > >> > >> 2000 MHz wide channel and 256QAM for 10 Gbps in the FDD 71-86 GHz bands. > >> Question is... What's the Rx level needed for that, and how quickly > does it > >> drop off with rain? > >> > >> > >> > >> > > > > >
