"
I've also found Ubuntu 7.04 (64-bit - not sure about 32-bit) to be very slow.
I've been running it on a brand new dual Xeon (quad core, E5310 1.6GHz)
with 16GB RAM and 3ware 9560SE PCIe controller, 6 x SATA II disks in
RAID 10 configuration.
With no load, I get around 124MB/s write performance
This appears to be the normal behavior of the card when in raid 5 mode.
Marking as not going to fix unless someone can show otherwise. Raid 5
just performs very badly.
** Changed in: linux (Ubuntu)
Status: Confirmed => Invalid
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: New
so, doing some research on the rtl8187 driver, it appears that it
depends on the stuff that comes in the mac80211 kernel module. About an
hour after inserting the module, I'm experiencing zero degradation of
signal/packet loss.
Can this be verified by someone else?
Here's my stats:
uname -a: L
** Attachment added: "lspci.log"
http://launchpadlibrarian.net/13975964/lspci.log
--
rtl8187 drops connection
https://bugs.launchpad.net/bugs/182473
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
** Attachment added: "dmesg.log"
http://launchpadlibrarian.net/13975968/dmesg.log
--
rtl8187 drops connection
https://bugs.launchpad.net/bugs/182473
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
hello!
first, make sure it's not already present by doing this:
$ sudo lspci | grep mac80211
if you get output, then it's already present and I'm just a moran.
If you don't get output, then it's not working, and you can just type
$ sudo modprobe mac80211
and you'll be good to go.
S
Jordan,
This is still an issue in Hardy, are you still the correct person for
this to be assigned to?
--
Systemtap should require kernel debug information
https://bugs.launchpad.net/bugs/106957
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Just incredible... You don't feel that a failure to build your own
damned kernel sources on your own build tools is a problem?? I'm not
going to bother with any bug reports from now on. Everything I've ever
submitted is either (a) ignored, (b) closed without comment or (c)
determined to simply
** Bug watch added: SourceForge.net Tracker #1956832
http://sourceforge.net/support/tracker.php?aid=1956832
** Also affects: synergy2 via
http://sourceforge.net/support/tracker.php?aid=1956832
Importance: Unknown
Status: Unknown
--
cursor is very unresponsive with synergyc in Ubu
** Changed in: synergy (Ubuntu)
Status: New => Confirmed
** Bug watch added: SourceForge.net Tracker #1911548
http://sourceforge.net/support/tracker.php?aid=1911548
** Also affects: synergy2 via
http://sourceforge.net/support/tracker.php?aid=1911548
Importance: Unknown
Stat
d
the 'don't show this message again' so I don't have the exact wording.
steven r.
--
No Sound After Hibernation U205-S5067
https://bugs.launchpad.net/bugs/144323
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Yes it does. You have to set your "Default hub encoding" option in the
preferences to CP1251 (or whatever encoding you think the hub you're
connecting to uses) in order for it to work. You can also set it on a
per-hub basis in the favorite hubs tab. However, since the NMDC protocol
does not specify
Sounds like some library issue. Please try with Hardy & linuxdc++ 1.0.1
--
GThread-ERROR **: file /build/buildd/glib2.0-2.13.7/gthread/gthread-posix.c:
line 367 (): error 'Cannot allocate memory' during 'pthread_create'
https://bugs.launchpad.net/bugs/130674
You received this bug notification be
I tried your scenario but it does not crash, it simply outputs the
following error to the terminal:
StartSocket (tcp): Caught "Permission denied"
StartSocket (udp): Caught "Permission denied"
If you want it fixed, compile latest cvs in debug mode and submit a
backtrace.
--
LinuxDC++ crashes whe
** Attachment added: "dmesg1.log"
http://launchpadlibrarian.net/9143763/dmesg1.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
** Attachment added: "lspci-vvnn1.log"
http://launchpadlibrarian.net/9143776/lspci-vvnn1.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mai
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/9143769/lspci-vvnn.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs maili
** Attachment added: "uname-a.log"
http://launchpadlibrarian.net/9143782/uname-a.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing lis
** Attachment added: "version.log"
http://launchpadlibrarian.net/9143787/version.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing lis
** Attachment added: "version1.log"
http://launchpadlibrarian.net/9143791/version1.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing l
** Attachment added: "uname-a1.log"
http://launchpadlibrarian.net/9143785/uname-a1.log
--
BIOS reset after restart
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing l
Tried this with Gutsy Gibbon with the same result i.e. on board sound is
disabled in the BIOS after hitting restart. This results in no sound
device being detected.
Attached are the various logs as requested. Those with "1" added are
after restarting the computer.
** Attachment added: "dmesg.log"
The vast majority of 32-bit build problems on 64-bit platforms can be
mitigated by simply creating the missing:
libfoo.so.2.2 --> libfoo.so.2
libfoo.so.2 --> libfoo.so
symlinks upon install of ia32-libs.
In my humble opinion, Unbuntu development is spending more effort
defending the fact that yo
After further digging around on HP's website I have found a BIOS update
for this model of computer loaded with Windows Me that appears to
address this particular issue
(http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv169en&lc=en&cc=us&dlc=en&product=59630&os=209&lang=en).
Qu
I can 2nd what matt is saying.
--
linux-xen for x86_64
https://bugs.launchpad.net/bugs/132726
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
After updating BIOS, this particular problem is now fixed.
--
BIOS settings change after rebooting Ubuntu
https://bugs.launchpad.net/bugs/136690
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bu
Public bug reported:
Binary package hint: ubiquity
Verified in in Feisty, and Gutsy daily 9-7-07
Guided partitioning
Guided - use entire disk and set up LVM
Select disk to partition:
SCSI3 (0,0,0) (sda) - 1.5 TB AMCC 9650SE-4LP DISK
The following partitions are going to be formatted:
parti
Public bug reported:
Binary package hint: ubiquity
Verified in in Feisty, and Gutsy daily 9-7-07
Guided partitioning
Guided - use entire disk and set up LVM
Select disk to partition:
SCSI3 (0,0,0) (sda) - 1.5 TB AMCC 9650SE-4LP DISK
The following partitions are going to be formatted:
parti
duplicate submital
** Changed in: ubiquity (Ubuntu)
Status: New => Incomplete
--
Guided partitioning
https://bugs.launchpad.net/bugs/138179
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu
I'm wondering if this is connected to Bug #75295 Feisty freeze, kernel
(?) tries to access DVD drive
I'm seeing the problem on the following Hardware
CPU - Athlon XP 2800
Motherboard Gigabyte 7vaxp
DVD - Pioneer 110D
OS - Ubuntu Feisty
Kernel - 2.6.20-16-generic
When I burn a DVD under k3b i get
I'm wondering if this is connected to Bug #119258 K3B is freezing system
AFTER burning DVD.
I'm seeing the problem on the following Hardware
CPU - Athlon XP 2800
Motherboard Gigabyte 7vaxp
DVD - Pioneer 110D
OS - Ubuntu Feisty
Kernel - 2.6.20-16-generic
When I burn a DVD under k3b i get a freeze
partman: No matching physical volumes found
partman: No volume groups found
partman: Reading all physical volumes. This make take a while.
partman-lvm: Physical volume '/dev/sda5' is already in volume group
'barracudas'
partman-lvm: Unable to add physical volume '/dev/sda5' to volume group
'he
I've requested this to be included in 0.20-fixes. We include this patch
in myPVR to fix this particular problem.
The diff can be pulled up at http://cvs.mythtv.org/trac/changeset/12550
--
Mythtv "Error encountered displaying video" on DVB-T program change
https://bugs.launchpad.net/bugs/126423
Y
Backport to 0.20-fixes was requested in
http://svn.mythtv.org/trac/ticket/3591
--
Mythtv "Error encountered displaying video" on DVB-T program change
https://bugs.launchpad.net/bugs/126423
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubu
I'm one of the maintainers of the Tango Icon Theme for Thunderbird and I
am able to consistently reproduce this crash as well (turning on
notifications and using our theme).
As the theme consists entirely of CSS and PNG images, it's hard to
imaging how we'd be causing a crash, but it seems we are.
** Bug watch added: Mozilla Bugzilla #389457
https://bugzilla.mozilla.org/show_bug.cgi?id=389457
** Also affects: thunderbird (upstream) via
https://bugzilla.mozilla.org/show_bug.cgi?id=389457
Importance: Unknown
Status: Unknown
--
Latest version hungs after downloading new mail
; app crash on launch
> https://bugs.launchpad.net/bugs/106093
> You received this bug notification because you are a direct subscriber
> of the bug.
>
--
Steven R. Ketelsen
--
app crash on launch
https://bugs.launchpad.net/bugs/106093
You received this bug notification because you are
4 has been included in coreutils since at least version 6.3
which came out in September 2006. Maybe it's time to grab a newer source
from upstream...? :-^
Cheers,
Steven
** Affects: coreutils (Ubuntu)
Importance: Undecided
Status: New
--
coreutils: base64 utility missing
https://bug
I can confirm both the bug and the fix. Thanks.
Steve Ketelsen
--
Dist upgrade in up-to-date Gutsy reports errors
https://bugs.launchpad.net/bugs/125260
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
** Attachment added: "dmesg output after 'modprobe pata_it821x noraid=0'"
http://launchpadlibrarian.net/8590757/dmesg.txt
--
pata_it821x gets stuck in noraid mode
https://bugs.launchpad.net/bugs/128909
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bu
** Attachment added: "uname -a"
http://launchpadlibrarian.net/8590752/uname.txt
--
pata_it821x gets stuck in noraid mode
https://bugs.launchpad.net/bugs/128909
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mai
Public bug reported:
Binary package hint: linux-source-2.6.20
I am trying to get my it821x raid card working until Ubuntu Feisty. This has
two hard drives connected and set up as a RAID1 array.
Because of bug 106931, the system does not currently see this array.
Experimenting, I found the norai
** Attachment added: "lspci -vnn"
http://launchpadlibrarian.net/8590763/lspci2.txt
--
pata_it821x gets stuck in noraid mode
https://bugs.launchpad.net/bugs/128909
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
** Attachment added: "lspci"
http://launchpadlibrarian.net/8590762/lspciu.txt
--
pata_it821x gets stuck in noraid mode
https://bugs.launchpad.net/bugs/128909
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs maili
Public bug reported:
Binary package hint: linux-source-2.6.20
I have a IT821x raid card, which gives strange information in lspci (the
buffer too small error):
lspci output:
00:0d.0 RAID bus controller: (rev 11)
lspci -vnn output:
00:0d.0 RAID bus controller [0104]: (rev 11)
Subsystem
I am also receiving this error in 2.6.20-16-server.
** Attachment added: "dmesg"
http://launchpadlibrarian.net/8590900/dmesg.txt
--
Unable to detect ITE8212 RAID0 array
https://bugs.launchpad.net/bugs/106931
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Having now restarted the machine, the card does start up in smart mode
again. A soft reboot was enough.
I'd say the bug is therefore of low priority, since anyone doing this
can just reboot, but it'd be nice if the driver could place the card
into smart mode.
--
pata_it821x gets stuck in noraid
Bug is no longer present. If this bug manifests itself again, please
open a new bug. Thanks!
** Changed in: bzflag (Ubuntu)
Assignee: Siegfried Gevatter (RainCT) => (unassigned)
Status: Incomplete => Invalid
--
Missing dependenc
https://bugs.launchpad.net/bugs/68076
You received th
It does sound like a VBI issue. Make sure VBI is turned off in the
MythTV setup
Also can you run the following to see if the IVTV driver is memory
starved
cat /proc/sys/vm/min_free_kbytes
--
IVTV output choppy and flickers
https://bugs.launchpad.net/bugs/106881
You received this bug notificatio
Public bug reported:
Binary package hint: xserver-xorg
Compiz works beautifully on my 32-bit Athlon XP running gutsy gibbon
Tribe 3, on an nVidia GeForce FX 5900XT 128MB card. When glxgears or
other 3d apps (neverball, vendetta) are started when compiz is running,
X hard crashes. Some opengl sc
Confirmed here as well.
--
tty[1-6] are active but display nothing in Gutsy
https://bugs.launchpad.net/bugs/129910
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://li
Thanks, I have been noticing this continually but just to be sure have
re-tested it now and it is still occurring; a 3m 3s track just ripped is
shown in rhythmbox as a 7m 22s track. Trying wit other applications:
'mp3info -x' gives a length of 3m 3s (correct)
mplayer gives a length of 7m 22s (inco
** Changed in: sane-backends (Ubuntu)
Assignee: Steven Harms => Ubuntu Printing Team
--
brother-mfc SANE backend available
https://bugs.launchpad.net/bugs/16704
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mail
Appears to be a hardware error, possibly heat related. If problem
continues, please open a new report. Thanks!
** Changed in: linux-source-2.6.20 (Ubuntu)
Assignee: Steven Harms => (unassigned)
Status: Incomplete => Invalid
--
downloads corrupt
https://bugs.launchpad.ne
Verified here again, feisty server installer 386.
Also, I verified it is fixed on gusty server installer 386.
--
udev rules missing from udeb
https://bugs.launchpad.net/bugs/105623
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
-
Public bug reported:
Binary package hint: openoffice.org
Hi, I suspect this is not going to be a useful report, but I'll do what
I can, and if you need any more details let me know.
When I start OpenOffice, I usually go to the File menu (to e.g. open a
document, or print one if I opened a docume
Public bug reported:
Binary package hint: linux-source-2.6.20
I have installed Feisty on a HP Pavillion 7940 desktop (dual boot with
XP). Generally everything works rather nicely. However if I restart
Ubuntu the on-board sound in the BIOS settings is disabled so there is
no sound (Via AC97) requi
Confirmed!
Both ways - Highlighting+Middle Mousebutton and C&P via + -
end up in a crashed Kmail.
Kubuntu "Gutsy" ; upgraded yesterday from "Feisty".
--
kmail locks when pasting text into composer
https://bugs.launchpad.net/bugs/130392
You received this bug notification because you are a memb
Feisty does not have 1.3.2 on all architectures
http://packages.ubuntu.com/feisty/utils/encfs (1.2.5-1-1)
http://packages.ubuntu.com/feisty/utils/sshfs (1.6-1)
--
encfs does not work with sshfs in feisty AMD64
https://bugs.launchpad.net/bugs/107594
You received this bug notification because you a
Just to say I've downloaded and compiled the latest stable kernel from
kernel.org (2.6.22-1) and the bug is still present there (same dmesg
messages). Haven't looked in the Ubuntu kernel repository or at the
latest kernel.org development versions though.
--
Unable to detect ITE8212 RAID0 array
ht
I should probably say I also have the card successfully running under
7.04 using the old it8212 compiled against the kernel headers for the
2.6.20-16 kernel.
This is working alongside the libata drivers (my ubuntu installation
runs on another drive which is not connected to the raid card) so
recom
I should add, that pata_821x will continue to load at boot time and
prevent it821x working, so you'll need to remove that module more
permanently.
Running "update-initramfs -u" after removing pata_it821x and installing
it821x will update the initrd boot image for the current kernel,
removing the p
I can confirm this problem still exists in feisty.
--
[edgy]synaptics touchpad stop work in new session user
https://bugs.launchpad.net/bugs/60544
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
I have found that Dapper auto configures my USB port when the cable
modem is hooked to it, as eth0. Edgy and Feisty do nothing with it at
all. They may not be searching the USB ports for network connections?
--
Lost USB Cable Modem Detection After Dapper
https://bugs.launchpad.net/bugs/92488
Yo
** Changed in: libpam-foreground (Ubuntu)
Status: New => Invalid
--
libpam-foreground creates login record for beagleindex rather than $USER
https://bugs.launchpad.net/bugs/48511
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
I've created a debdiff on the package network-manager-applet (known as
network-manager-gnome) which applies this patch.
See https://wiki.ubuntu.com/UbuntuPackagingGuide/BuildFromDebdiff for
instructions on how to use this patch.
** Attachment added: "debdiff for network-manager-applet_0.6.5-0ubun
I should say that I've not had the opportunity to test this patch yet,
so could someone else experiencing this problem try it and post here
whether it works?
--
[gutsy] network-manager i have to manually configure wpa/2 enterprise every
time to connect
https://bugs.launchpad.net/bugs/132473
You
I can now confirm it works here too. :o) Excellent.
Now maybe whoever looks after this package can get it released as an
update through apt...
--
[gutsy] network-manager i have to manually configure wpa/2 enterprise every
time to connect
https://bugs.launchpad.net/bugs/132473
You received this
Same problem on gutsy with Dell D630. Supposed resolution currently is:
sudo apt-get install module-assistant
sudo m-a update
sudo m-a prepare
sudo m-a a-i alsa
** Changed in: alsa-driver (Ubuntu)
Assignee: (unassigned) => Ubuntu Kernel Team (ubuntu-kernel-team)
--
integrated sound card
Can anyone confirm if this is now a dupe of
https://bugs.launchpad.net/ubuntu/+source/linux-
source-2.6.22/+bug/131133
--
integrated sound card does'n work
https://bugs.launchpad.net/bugs/39770
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscribe
Public bug reported:
I have a laptop Compaq F572 using the wireless card Broadcom 4311 Rev 2
and I have not been able to get it to work using 7.10 and the 8.04
alpha's. The Network Settings on the 8.04 shows Wired Connection and
Point-To-Point Connection, but does not show Wireless Connection. All
Public bug reported:
I would like to see a method for changing the proxies of a machine based
on the where the machine is at.
For example, instead of going to "Network Proxy" and "Synaptic" and
"Firefox" to change all my proxies going from work to home, have a
simple dropdown that shows "Home" an
I have this same error on more than one install of Gutsy. Has a fix
been found?
--
sqsh crashes at startup. dependency error?
https://bugs.launchpad.net/bugs/149302
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
ut of the 'crash'.
Thanks!
** Changed in: wine (Ubuntu)
Assignee: (unassigned) => Steven Harms (sharms)
Status: New => Incomplete
--
Wine crashes when ran from any folder other than build directory
https://bugs.launchpad.net/bugs/195824
You received this bug notificat
** Changed in: python2.5 (Ubuntu)
Assignee: (unassigned) => Ubuntu Core Development Team (ubuntu-core-dev)
--
package python2.5 2.5.2-0ubuntu3 failed to install/upgrade: trying to overwrite
`/usr/lib/python2.5/site.py', which is also in package python2.5-minimal
https://bugs.launchpad.net/b
This looks like it is not a ubuntu issue. Try
http://www.elephantsdream.org and let us know if that works for you.
** Changed in: firefox-3.0 (Ubuntu)
Assignee: (unassigned) => Steven Harms (sharms)
Status: New => Invalid
--
unable to visit www.elephantdream.org
If you want Synaptic to stop warning you you could just let synaptic
update then overwrite the file at /usr/bin/nt with the one in the fixed
DEB
If you extract the DEB using a RIGHT CLICK and EXTRACT HERE then,
extract the DATA in there, you can just copy it over the top of the
broken one.
sudo
I was not asking for anything more than for the ia32 package to create
the (&%&$ symlinks per my original note above. I guess it's just too
much to ask. Guess I'm stuck doing it manually. For the life of me I
do not understand why the deb build for the 32-bit system libs can't be
made conditiona
Thanks - I will add this patch to Version 0.2.2.6
** Changed in: easycrypt (Ubuntu)
Status: New => Confirmed
--
Fails to calculate free space for long mount points
https://bugs.launchpad.net/bugs/185497
You received this bug notification because you are a member of Ubuntu
Bugs, which is t
*** This bug is a duplicate of bug 185497 ***
https://bugs.launchpad.net/bugs/185497
** This bug has been marked a duplicate of bug 185497
Fails to calculate free space for long mount points
--
"Create crypt"-window crash
https://bugs.launchpad.net/bugs/188253
You received this bug notifi
Public bug reported:
Binary package hint: easycrypt
new
** Affects: easycrypt (Ubuntu)
Importance: Undecided
Status: New
--
Candidate revision easycrypt_0.2.2.6-0ubuntu1
https://bugs.launchpad.net/bugs/188465
You received this bug notification because you are a member of Ubuntu
B
easycrypt (0.2.2.6-0ubuntu1) hardy; urgency=low
* New Upstream Version (LP: #188465)
* Fixed Bug calculating free space (LP: #185497)
* Added Danish Language
* Added Greek Language
-- Steven Harper <[EMAIL PROTECTED]> Sat, 2 Feb 2008 09:52:00
+0100
--
Candidate re
WHAT'S NEW:
0.2.2.6
Applied all the huge tidy up and debug effort by: Mathieu Gaspard
His changes also include changing the crypt array to a dictionary
He also added a very verbose debug mode, called with -d
Mathieu also suggested a left-click to activate tray icon, this is implemented
Fixed Bug w
** Attachment added: "easycrypt_0.2.2.5-0.2.2.6.interdiff.gz"
http://launchpadlibrarian.net/11735240/easycrypt_0.2.2.5-0.2.2.6.interdiff.gz
--
Candidate revision easycrypt_0.2.2.6-0ubuntu1
https://bugs.launchpad.net/bugs/188465
You received this bug notification because you are a member of Ub
SRC at
http://www.squeezedonkey.com/svn/linux/trunk/releases/easycrypt/src/
--
Candidate revision easycrypt_0.2.2.6-0ubuntu1
https://bugs.launchpad.net/bugs/188465
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mai
Public bug reported:
Binary package hint: easycrypt
new
** Affects: easycrypt (Ubuntu)
Importance: Undecided
Status: Confirmed
--
Candidate revision easycrypt_0.2.2.5-0ubuntu1
https://bugs.launchpad.net/bugs/181384
You received this bug notification because you are a member of Ub
easycrypt (0.2.2.5-0ubuntu1) hardy; urgency=low
* New Upstream Version (LP: #181384)
-- Steven Harper <[EMAIL PROTECTED]> Tue, 8 Jan 2008 23:27:00
+0100
--
Candidate revision easycrypt_0.2.2.5-0ubuntu1
https://bugs.launchpad.net/bugs/181384
You received this bug notification becau
WHAT'S NEW:
0.2.2.5
Add warning when you try to open same Crypt twice
When changing Mode you are now only warned if you have Crypt(s) open that they
will be closed
Change Open Crypt - normal to Open the Crypt
Change Close Crypt - normal to Close the Crypt
Change Open Crypt - expert to Open a Cryp
** Attachment added: "easycrypt_0.2.2.4-0.2.2.5.interdiff.gz"
http://launchpadlibrarian.net/11221197/easycrypt_0.2.2.4-0.2.2.5.interdiff.gz
--
Candidate revision easycrypt_0.2.2.5-0ubuntu1
https://bugs.launchpad.net/bugs/181384
You received this bug notification because you are a member of Ub
Compaq F572, NVIDIA GeForce Go 6100. I had good resolution until January
7, 2008 when new software was downloaded. Since then I have been only
able to get 640 x 480. I reinstalled the restricted drivers without
success. I also tried the new NVIDIA driver without success.
--
[Hardy 8.04 alpha-2, n
** Changed in: easycrypt (Ubuntu)
Status: Fix Committed => Fix Released
--
Make the Tray Icon more useful
https://bugs.launchpad.net/bugs/179747
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ub
Public bug reported:
Hi, I am running boinc 5.10.8 with the [EMAIL PROTECTED] project on my Athlon
64X2 box (with the 32-bit version of Ubuntu). When it first starts up it
correctly runs two rosetta_beta processes to use both CPUs, but
sometimes one of them disappears and doesn't come back. I don'
Also possibly missing is mailto (string) which although not used by
vino-server is used by vino-preferences.
--
vino-preferences doesn't support some gconf options
https://bugs.launchpad.net/bugs/144324
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug c
Public bug reported:
Binary package hint: vino
Several of the preferences read by vino-server in vino-prefs.c aren't
edited by vino-preferences.
The affected preferences as far as I can see are:
local_only (gboolean)
use_alternative_port (gboolean)
alternative_port (int)
require_
This patch will update the user interface to add options for changing
the local_only, use_alternative_port, alternative_port,
require_encryption and lock_screen_on_disconnect settings, and updates
the vino-preferences.c file to use the new widgets.
** Attachment added: "debdiff for vino_2.20.0-0ub
Public bug reported:
The system's situation when the bug occurred.
• totem open, video paused, "always on top"
• Update Manager open, but Failed to download list of changes
• Epiphany open in the background with a google search waiting
• no internet connection
• then, I went to gnome-terminal an
** Attachment added: "lspci.txt"
http://launchpadlibrarian.net/10252767/lspci.txt
--
can move mouse cursor, but keyboard and mouse input stop, computer continues
functioning
https://bugs.launchpad.net/bugs/159582
You received this bug notification because you are a member of Ubuntu
Bugs, whi
uname -a
Linux semper 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686
GNU/Linux
--
can move mouse cursor, but keyboard and mouse input stop, computer continues
functioning
https://bugs.launchpad.net/bugs/159582
You received this bug notification because you are a member of Ubuntu
Bug
this is an little of dmesg from when i down'd and up'd the ra0 interface
and then tried unplugging the mouse.
[154690.492000] ra0: authenticated
[154690.492000] ra0: associate with AP 00:13:46:1e:82:22
[154690.492000] ra0: RX ReassocResp from 00:13:46:1e:82:22 (capab=0x31
status=0 aid=2)
[154690.4
Also, this is an up-to-date Gutsy with Compiz enabled on nVidia binary
drivers.
--
can move mouse cursor, but keyboard and mouse input stop, computer continues
functioning
https://bugs.launchpad.net/bugs/159582
You received this bug notification because you are a member of Ubuntu
Bugs, which is
1101 - 1200 of 3895 matches
Mail list logo
