Still an issue. Current configuration looks like this:
Linux pokeefe-laptop 2.6.27-10-generic #1 SMP Fri Nov 21 12:00:22 UTC
2008 i686 GNU/Linux
Ubuntu 8.10
cups-config --version
1.3.9
gedit 2.24.2
One remote printer configured as default:
lpp://10.0.0.1:631/printers/Photosmart-C4200-series
S
Tim ---
Just applied the LBM update from today and retested the LBM ATH5K .vs.
the NDISWRAPPER module. There are still performance problems, however
the LBM ATH5K module seems very stable now. I cannot duplicate the
earlier lost packet behavior I was observing in October.
** Attachment added:
Not working for me even with the 6.11.0 driver. Am attaching xorg.conf
and Xorg.0.log files.
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/23149472/Xorg.0.log
--
[RV770 HD 4850] Output DVI-I_2/analog enabled but has no modes
https://bugs.launchpad.net/bugs/319930
You receiv
xorg.conf
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/23149576/xorg.conf
--
[RV770 HD 4850] Output DVI-I_2/analog enabled but has no modes
https://bugs.launchpad.net/bugs/319930
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
The following patch has been discussed on the barry mailing list and the
Kernel USB Mailing list. Please consider for inclusion in the 0.14
version of barry-util prior to the Jaunty release
On Mon, 2009-02-23 at 03:11 +, Paul O'Keefe wrote:
> Have been testing against the Ubun
On Fri, 2009-02-27 at 19:11 +, Paul O'Keefe wrote:
> The following patch has been discussed on the barry mailing list and the
> Kernel USB Mailing list. Please consider for inclusion in the 0.14
> version of barry-util prior to the Jaunty release
>
Trying again with patch
I also opened an issue with Dreamtime and they discovered and ultimately
changed settings for their SIP support which cleared this issue. Pls close as a
non issue for Ekiga.
--Original Message--
From: Pedro Villavicencio
Sender: boun...@canonical.com
To: pboke...@bellsouth.net
ReplyTo: Bu
Was looking for a similar issue to report against.
In my configuration, I had previous release of Ekiga running on
Intrepid. I use it infrequently, mainly for voicemail but have both an
Ekiga.net and Diamondcard account so I can do full in/out calling.
Received a voicemail today and went to check
I always read the change log for the Kernel at least before I apply an
update and thus I knew my ATH5K support would disappear. But I've long
felt that update-manager or some other tool should preserve the last few
changelogs locally so that when you applied an update and something
suddenly stoppe
Following up on my earlier post, I was not able to get LBM to work on my
Acer 4720z. I dropped back to NDISWRAPPER while I continue
troubleshooting, but this did break my install. I'll investigate the
LBM package further tomorrow.
On Mon, 2008-10-27 at 00:15 +, Moreira Mickaël wrote:
> Ple
Add my report to this thread.
With Intrepid update this week that disabled ath5k driver in linux-
image-2.6.27-7-generic I followed suggested instructions to install
linux-backports-modules to restore ath5k driver.
Currently running
linux-image-2.6.27-7-generic version 2.6.27-7.14 &
linux-back
dmesg output for post above
** Attachment added: "DMESG output"
http://launchpadlibrarian.net/18942981/dmesg.log
--
Kernel update to 2.6.27-7.14 broke atheros wireless on acer aspire one
https://bugs.launchpad.net/bugs/289100
You received this bug notification because you are a member of Ubun
Juan ---
As requested. Still seeing same behavior with the blacklist of the
ath9k module:
--- 10.0.0.254 ping statistics ---
114 packets transmitted, 49 received, 57% packet loss, time 142447ms
rtt min/avg/max/mdev = 1.978/119.805/795.408/167.254 ms
-
$
want to make something public, simple
> information like "your wifi will certainly break after this upgrade,
> please install package X", you *need to post in the forums*, preferably
> making a sticky out of it.
>
> ---> I strongly agree with Paul O'Keefe and Willem
Public bug reported:
Binary package hint: ekiga
Ekiga comes on-line and registers with my two SIP providers, ekiga.net
and Diamondcard. Upon shutdown registration to ekiga.net is properly
shutdown, but registration to Diamondcard remains registered.
-- Note, this is hypothesis, Diamondcard does
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18811139/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/18811140/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/18811141/ProcStatus.txt
--
Ekiga
Loaded X-Lite sip client on a windows system and verified that
Diamondcard is ignoring SIP unregister command. Appears there is not a
specific issue with Ekiga but instead with Diamondcard. Have referred
this issue to them.
--
Ekiga does not properly unregister
https://bugs.launchpad.net/bugs/2
Public bug reported:
Kernel: 2.6.27-4-generic
Gnome: 2.24.0
system-config-printer: 1.0.5
Development Branch Ubuntu 8.10, all updates applied
Scenario:
Laptop -- many printers configured from customer sites. Primary home
printer configured as internet printing protocol to another Ubuntu
system
Still seeing buzz/static click using pulseaudio (0.9.14-0ubuntu11).
Mostly for me with web streaming media. System sounds always clear,
along with Rhythmbox, but can hear static sound right now at idle with
no media playing just by moving the mouse around.
Device:
00:1b.0 Audio device: Intel Corpo
Cross posting from 335955:
Still seeing buzz/static click using pulseaudio (0.9.14-0ubuntu11).
Mostly for me with web streaming media. System sounds always clear,
along with Rhythmbox, but can hear static sound right now at idle with
no media playing just by moving the mouse around.
Device:
00:1
I had other problems once I upgraded to the Jaunty pre-release and ended up
switching graphics cards. I do not have a suitable test site any longer to
review the problem.
--Original Message--
From: YoBoY
Sender: boun...@canonical.com
To: pboke...@bellsouth.net
ReplyTo: Bug 273484
Subject:
probe.cc already included commented out area that had a device reset
followed by a sleep. Uncommenting those two lines made the device
function under Jaunty.
---
Investigation:
--> Program functioned properly under gdb in single step mode
--> Suspect a timeout problem on the USB bus
--> M
Public bug reported:
Binary package hint: opensync-plugin-evolution
Configured with barry-util project.
syncgroup.conf
===
EvoBarry0
evo2-sync.conf
===
file:///home/pokeefe/.ev
b 19, 2009 at 12:49:20AM -0500, Paul O'Keefe wrote:
> I'm on 2.6.28-8.23. I also have 2.6.28-7.20 and 2.6.27-11.27 sitting on
> the machine. Tests with 2.6.28-7.20 kernel are identical to the
> 2.6.28-8.23 version.
>
> Tests with 2.6.27-11.27 work correctly for btool. I tr
Repeat of above. Architecture is x86_64. Occurs with both indexed and
RGB images. Same build of gimp is working fine on i386 system on the
same images.
--
gimp-2.6 crashed with SIGSEGV in g_object_get()
https://bugs.launchpad.net/bugs/330846
You received this bug notification because you are a me
Create the following file:
.is_audio_player
--
audio_folders=MUSIC
folder_depth=2
output_formats=application/ogg,audio/mpeg
use "mtp-sendfile .is_audio_player .is_audio_player" to transfer file to
root of Mp3 player
Jaunty version o
Public bug reported:
Binary package hint: barry-util
New package barry-util (and associated barrybackup-gui) non-functional for
current configuration:
Compilation of barry package on Intrepid using same dependencies works
correctly.
breset tool functions properly
btool discovers device correct
Have been testing against the Ubuntu built kernels and Kernel mainline.
Fails against any Kernel build from Ubuntu since 2.6.28-7. Fails against
mainline 2.6.28.6 and 2.6.29-rc5 on both x86 and x86_64.
Back trace shows waiting on a bulk usb read, last userland in libusb,
and hung in kernel space.
On Sat, 2009-03-21 at 17:45 +, Daniel T Chen wrote:
> On Sat, 21 Mar 2009, shane fagan wrote:
>
> > Audio still crackly. When it happens the only way to fix it is to kill
> > pulseaudio in system monitor and then starting pulseaudio back up. All
> > updates installed.
>
> Try the appropriate
My symptoms:could receive inbound calls but not place outbound
My steps to resolve:Recreate configuration fresh for Jaunty
My observation: Possible problem in the upgrade between Intrepid to
Jaunty.
I am using a USB attached headset and find it works much better in
Januty than it did in
Here are my specific configuration details since they are similar to
yours.
Pulse --
pulseaudio 0.9.14
System --> Preferences --> Sound (gnome-config)
Audioconferencing:
Sound Playback: Logitech USB Headset USB Audio (OSS)
Sound Capture: Logitech USB Head
Just enabled tracker on a system where I had not been running it and
immediately hit the SIGSEGV error.
--
trackerd crashed with SIGSEGV
https://bugs.launchpad.net/bugs/182712
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
Public bug reported:
Binary package hint: gnome-panel
Since update to Lucid Alpha, Clock, Weather, and Location controls have
disappeared from status area with no discernible way to return them
there. I have purged .gnome, .gnome2, .gconf, etc settings to restore
gnome to default state. Note also
** Attachment added: "Picture of status bar"
http://launchpadlibrarian.net/39386937/Status_Applets.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/39386938/Dependencies.txt
** Attachment added: "GConfNonDefault.txt"
http://launchpadlibrarian.net/39386939/GConfN
Public bug reported:
Binary package hint: empathy
Since update to Alpha Lucid, Empathy unable to connect to AIM. When
attempting same connect in Pidgin there is a report that account has
been connecting/disconnecting too frequently.
ProblemType: Bug
Architecture: i386
Date: Thu Feb 18 22:52:14 2
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/39387106/Dependencies.txt
--
empathy does not connect to AIM
https://bugs.launchpad.net/bugs/524221
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I did not mean to imply that it was not working in Pidgin, only that I
saw an error in Pidgin about too many connect attempts when I switched
to that after failing to connect with Empathy. Pidgin is working
properly.
empathy:
Installed: 2.28.1.1-0ubuntu1
Candidate: 2.29.90-0ubuntu2
Version t
Need to resolve the hold on empathy
The following packages have been kept back:
empathy libavcodec-extra-52 libavcodec-unstripped-52
This was a straight upgrade from 9.10 to 10.4. the 9.10 was an upgrade
from 9.4 which had been a clean install. I'll continue to investigate
why there is a hold h
Hold resolved with "aptitude dist-upgrade" Problem still here however
(1) Empathy will not connect, see attached screen shot
(2) Pidgin does connect with same credentials
empathy:
Installed: 2.29.90-0ubuntu2
Candidate: 2.29.90-0ubuntu2
Version table:
*** 2.29.90-0ubuntu2 0
500 http
dist-upgrade did not complete successfully
Forcing a second dist-upgrade cleared this issue. Clock has returned as
it should.
--
Clock, Temperature, location Change missing since Lucid Alpha Netbook Remix
https://bugs.launchpad.net/bugs/524219
You received this bug notification because you are a
Confirm, fixed package pidgin 1:2.6.6-1ubuntu2 corrected login issue
--
empathy does not connect to AIM
https://bugs.launchpad.net/bugs/524221
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
Pls close then. Whatever the issue with ubuntuone-servers was it's now
resolved as contacts are correctly showing up online. I'm participating
on another issue (# 509556) that could also have caused some of this
behavior.
--
Contacts in Ubuntu One are unreachable
https://bugs.launchpad.net/bugs/5
Public bug reported:
Binary package hint: ubuntuone-client
Contacts do not show in cloud any more and client cannot sync against it
Cloud shows this error message when attempting to connect to contacts
OOPS-ID-1541appserver17414
ProblemType: Bug
.home.pokeefe..cache.ubuntuone.log.syncdaemon.ex
** Attachment added: ".home.pokeefe..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/41476878/.home.pokeefe..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/41476879/Dependencies.txt
** Attachment added:
Looks like 538452 should be the parent. This seems to be the same issue.
--
Contacts in Ubuntu One are unreachable
https://bugs.launchpad.net/bugs/543164
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu
I had updated the report a long time ago. Diamondcard had to modify a
configuration setting on their end, the problem was the service provider and
not Ekiga. Please close this report.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Pedro Villavicencio
Date: Tue, 25 Au
Public bug reported:
Binary package hint: initramfs-tools
Was able to run update-initramfs manually without any further errors.
This error was reported by update-manager.
ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: linux-image-2.6.37-12-generic 2.6.37-12.26
ProcVersionSignature: Ub
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/700432
Title:
package linux-image-2.6.37-12-generic 2.6.37-12.26 failed to install/upgrade:
subprocess installed post-installation script returned err
Resolved: Upgrade problem between versions. Remove ~/.libreoffice and
then calc will start correctly.
Resolution was found on
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=641412#29
(comment #29)
Please reduce severity and mark as only affecting the upgrade script.
** Bug watch added: Debian
On Thu, 2011-11-17 at 18:30 +, Floris Luiten wrote:
> Paul O'Keefe: Thanks for that, it indeed solved the problem for me! I
> understand that the bug itself hasn't been fixed, but at least I (and others
> with this problem) can get my calc up-and-running.
> I cannot
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/857035
Title:
Unity/Compiz Hotkeys extremely slow
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/unity/+bug/857
Public bug reported:
Description:Ubuntu oneiric (development branch)
Release:11.10
unity:
Installed: 4.16.0-0ubuntu2
compiz:
Installed: 1:0.9.5.94+bzr20110919-0ubuntu1
Alt-tab and Meta (Windows key) keys extremely slow to respond, near 10
seconds. Normally would expect Alt-tab to
Is this a 64 bit problem? I have identical packages on i386 and it works
fine, but on my IA64 system it fails. My IA64 system is
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
On Sat, 2011-09-24 at 18:07 +, Omer Akram wrote:
> can you run unity from a live usb and test if the issue happens there as
> well. Also which GPU and driver are you using? Did you try to reproduce
> the bug in a guest session?
>
> ** Also affects: unity
>Importance: Undecided
>Sta
Used same USB image on another computer, this one with an ATI RV610
video card and saw normal/expected responses from Alt+Tab and Windows
Meta key. Using Xorg RADEON driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs
Matteo:
(1) What graphics card do you have
(2) Can you repeat the process by booting a USB flash drive with the current
version of Ubuntu 11.10 to see if you are still seeing it? 10.04 is more than
18 months old and I never had any problems with performance until this last
version, and only on
Ping. How can I get involved further to troubleshoot? Calc is a critical
app for me. Running 32 bit in a VM is not my preferred solution.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/878334
Title:
57 matches
Mail list logo
