Yes, the modesetting still works with that. I do not see anything about
accel in the changelog so I guess there is no change to this bug.
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs.launchpad.net/bugs/139210
You received this bug notification because you are a member of Ubuntu
Bugs,
Without xorg.conf it won't work, the monitor is not detected.
I will check what the current Gutsy driver version is and what it does
when I get to it.
--
6.7.192 no longer does 1152x864
https://bugs.launchpad.net/bugs/139330
You received this bug notification because you are a member of Ubuntu
B
** Bug watch added: freedesktop.org Bugzilla #12544
https://bugs.freedesktop.org/show_bug.cgi?id=12544
** Also affects: xorg-server via
https://bugs.freedesktop.org/show_bug.cgi?id=12544
Importance: Unknown
Status: Unknown
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs
Public bug reported:
After replacing my network card (actually mounting the hardrive into a
different system but the issue is the same) there is no networking
anymore.
There is /etc/udev/rules.d/70-persistent-net.rules which lists the old
MAC as eth0 and prevents the new card from becoming eth0.
It think it is possible to add the current locale to the configuration
file if it is an utf-8 locale.
However, I do not know what the format of the file is so I am not sure
if this can be done safely.
Another option is to start scim in en_US locale if the current locale is
not supported. This wou
I can confirm that smbfs is not installed on a new Ubuntu Feisty
installation which prevents mounting samba shares.
The very helpful kernel error is:
CIFS VFS: cifs_mount failed w/return code = -22
** Changed in: kubuntu-meta (Ubuntu)
Status: Invalid => New
--
Mounting remote Samba s
Bryce: The X autodetection is not a solution for now. It is so poorly
designed it is unusable.
It does not work by commenting out sections in the config file. You have
to *REMOVE* the config file *COMPLETELY*.
This means that many settings for which there are no reasonable defaults
break.
Howeve
Public bug reported:
Binary package hint: xserver-xorg-video-ati
After upgrading X to Gutsy the PC started to lock up, especially in
Firefox.
Downgrading the ati driver solved the problem.
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
00:01.0 PCI bridg
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/9259401/xorg.conf
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs.launchpad.net/bugs/139210
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bug
The offending driver version: 6.6.193
** Attachment added: "Xorg.0.log.old"
http://launchpadlibrarian.net/9259421/Xorg.0.log.old
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs.launchpad.net/bugs/139210
You received this bug notification because you are a member of Ubuntu
Bugs, whic
Public bug reported:
Binary package hint: linux-image-2.6.22-11-generic
When I boot with the new kernel all consoles and the syslog receive lots
of device-mapper errors, and the DVD-ROM keeps flashing every few
seconds trying to close the tray or inspect the media or something.
Happens with 2.6.2
Also dies within few minutes. It appears that the system is quite happy
except there are no updates to the on-screen picture nor can I use input
devices. But shutdown with power button works fine.
Also this driver does not do 1152x864. It is probably missing this
built-in mode at any usable freque
Public bug reported:
Binary package hint: xserver-xorg-video-ati
For config and logs see bug 139210
The built-in modes no longer fits the relatively reasonable sync rate
constraints. DDC not working.
** Affects: xserver-xorg-video-ati (Ubuntu)
Importance: Undecided
Status: New
--
Apparently the longer cable is defective.
I do not know how long the cable can be until the roundtrip for the
signal is too long for ddc to work but 5m is not that much.
--
Xorg resolution falling back to 640x480 and/or 800x600 when h/v freqs incorrect
https://bugs.launchpad.net/bugs/3731
You re
Public bug reported:
There are pdf files that have flags to tell the viewer to start in
fullscreen presentaion. Such file can be created in openoffice by
checking "start in fullscreen" and the various "disable "
checkboxes when creating a pdf export from a presentation.
Evince reads such files ju
That's not needed for 2MB cards and above. Note that the same driver
is used for Trio3D/2X which probably has 4MB, and there are versions
of this card that have 2MB.
I am not sure this is still present in Gutsy, the PSU in the computer
has died.
The problem was not so much in the chosen resolutio
On 30/10/2007, Scott Hilleard <[EMAIL PROTECTED]> wrote:
> Wait, sorry, that wasn't intended as a personal insult, thats his
> launchpad username!!! I was directing the comment at him and didn't mean
> it as an insult at all! :)
Ah, I was looking from my mailbox, and it looks like my spam filter
t
Public bug reported:
There are bugs in Ubuntu that were reported during the beta phase, cause
serious problems, and are still there.
There is bug 62195 which dates back to Edgy. It only affects some corner
cases but the scripts actively prevent the user from fixing the problems
caused by Ubuntu s
I only use AGP cards. I would expect PCI cards do not suffer from this
problem because they always run in PCI mode. There is no setting for AGP
speed in the BIOS.
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs.launchpad.net/bugs/139210
You received this bug notification because you are
On 21/12/2007, Richard Kleeman <[EMAIL PROTECTED]> wrote:
> If you read the first post you will see:
>
> [This issue is fixed by removing evms: just type "sudo apt-get remove
> evms" in a console.]
But that does not fix the issue. The issue is that unless you file a
duplicate of this bug and get t
FYI for me the problem is fixed by adding
Option "BusType" "PCI"
or
Option "AGPMode" "1"
into the device section of xorg.conf
--
ATI Radeon 9200 crashes with Gutsy driver
https://bugs.launchpad.net/bugs/139210
You received this bug notification because you are a member of Ubuntu
On 17/12/2007, Henrik Nilsen Omma <[EMAIL PROTECTED]> wrote:
> We have changed the default print management system in Ubuntu from
> gnome-cups-manager to system-config-printer because g-c-m is no longer
> maintained. Please open a new bug against system-config-printer if you
> still have this probl
On 17/12/2007, Henrik Nilsen Omma <[EMAIL PROTECTED]> wrote:
> We have changed the default print management system in Ubuntu from
> gnome-cups-manager to system-config-printer because g-c-m is no longer
> maintained. Please open a new bug against system-config-printer if you
> still have this probl
** Changed in: ubiquity (Ubuntu)
Sourcepackagename: None => ubiquity
--
install to an usb disk does not work
https://bugs.launchpad.net/bugs/111731
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu
Public bug reported:
Binary package hint: grub
When booting from an usb drive the grub shell in Linux always thinks the
internal drive is the first disk.
This is similar to the problem of several ATA controllers. However, in this
case the problem might be more apparent and thus easier to fix.
I think the Shift+Space is way too easy to trigger during typing. People
who write languages other than CJK are probably going to have problems
with this combination.
--
Enable Trigger keys with CJK native keys
https://bugs.launchpad.net/bugs/37687
You received this bug notification because you a
Thanks for taking the time to explain the Ubuntu specific changes.
On 19/05/07, Ming Hua <[EMAIL PROTECTED]> wrote:
> > Sure the C locale is not very fitting for writing characters that are
> > outside of ASCII. I could have figured out if I looked. But if Gnome can
> > warn about such trivia
Public bug reported:
Binary package hint: scim
scim in Ubuntu is patched to share the input method between applications by
default.
That is, instead of selecting input method separately for each window the
method is selected globally.
This setting may be helpful when using many office applicat
Public bug reported:
Binary package hint: gnome-applets
I was unable to type any complex characters in the gnome dictionary
applet even when scim is installed and working in other applications
(tried scim-anthy).
Since the applet already has setup for dictionaries that use complex
sctipts (Thai)
Comment (must be provided for Malone to work)
--
scim: im-switch configuration for XIM mode should check user's locale
https://bugs.launchpad.net/bugs/36547
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubun
OK, closing.
Thanks for diagnosing the problems for me.
** Changed in: scim (Ubuntu)
Status: Unconfirmed => Rejected
--
weird scim setup
https://bugs.launchpad.net/bugs/112186
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
unless there is an explanation what scim does wrong that it works with
everything but the applet it looks like that applet's fault.
** Changed in: gnome-applets (Ubuntu)
Sourcepackagename: scim => gnome-applets
--
gnome dict applet does not work with scim
https://bugs.launchpad.net/bugs/115663
Y
On 20/05/07, Sebastien Bacher <[EMAIL PROTECTED]> wrote:
> the applet works fine without scim, why would it be due to it?
>
Because everything else works fine with scim, just the applet does
not. You can type only English in the applet not CJK or the like.
--
gnome dict applet does not work with
Looks good, this is certainly an improvement over the "X broke, you are
to keep the pieces" dialog.
I would suggest several other things:
- when I set the driver to "iwantaponny" (or physically change the
card) I would like the tool to automatically remove the card section and
generate a new one
Public bug reported:
When I run dpkg-reconfigure xserver-xorg I am asked if I want to detect
my monitor, and then I am asked about the monitor parameters. Apparently
the monitor is not detected. X detects the monitor just fine.
** Affects: xorg-server (Ubuntu)
Importance: Undecided
** Attachment added: "Xorg.0.log"
http://librarian.launchpad.net/7406889/Xorg.0.log
--
the xorg-server configuration script does not detect my monitor
https://bugs.launchpad.net/bugs/110017
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact fo
*** This bug is a duplicate of bug 3731 ***
https://bugs.launchpad.net/bugs/3731
The negative story is that the exact same monitor fails to detect on mga
matrox g400 and g550 and Radeon 9250.
I think I used the DVI to VGA convertor when connecting the monitor to
the newer Radeon. Of course, t
Public bug reported:
Binary package hint: xorg
When I replace my graphics card with one that has chipset from a
different manufacturer X no longer works.
Of course, it works if I reconfigure it with X -configure or dpkg-
reconfigure xserver-xorg. I usually get suboptimal results this way (low
r
*** This bug is a duplicate of bug 3731 ***
https://bugs.launchpad.net/bugs/3731
That's not going to be flawless either. X hardware detection is also very buggy.
However, I think it is step in the right direction. Instead of maintaining a
different hardware detection with different bugs Ubunt
I would like to add that X often does not detect the monitor either. In
some cases xresprobe or similar can read the monitor info but X cannot.
Sometimes it is the other way around. I suspect there are some marginal
setups that require several retries/longer timeouts than usual.
And there are seve
It turns out I should have been more investigative. There is an option
to start presentation mode but it is not accessible from fullscreen
mode.
Fullscreen mode is earlier in the menu so it is what I choose when I
want something displayed fullscreen. However, disabling the toolbar that
is persent
Public bug reported:
When printing on Canon S300 the printout of the test page occupies about
2/3 of the page both in width and height. Printed text is too small. The
resolution setting is wrong. On the web resolotions 300x300 and 600x600
dpi are mentioned but the driver offers 360x360 and 720x720
Public bug reported:
Binary package hint: gnome-cups-manager
I tried changing the driver in the gnome-cups-manager, and when I closed the
properties and reopened, I saw the old value again. Configuration through the
web interface works but gnome-cups-manager still shows the old value.
(is this
Yes, with a rv100 card and Sony G200 monitor. It was not from boot to
boot but from X start to X start. That is probably why Windows keep the
resolution settings when no screen is detected. It may be turned off,
disconnected, or the detection just might have failed.
--
Xorg resolution falling bac
On 30/04/07, Pascal De Vuyst <[EMAIL PROTECTED]> wrote:
> Thanks for your bug report.
> You are not providing enough information for us to see the problem.
> Can you be more specific and describe the steps you have taken to change the
> "driver".
In printer properties there is a "driver" selectio
*** This bug is a duplicate of bug 3731 ***
https://bugs.launchpad.net/bugs/3731
On 30/04/07, Bryce Harrington <[EMAIL PROTECTED]> wrote:
> *** This bug is a duplicate of bug 3731 ***
> https://bugs.launchpad.net/bugs/3731
>
> On Thu, Apr 26, 2007 at 07:29:06AM -000
Public bug reported:
Tried installing Feisty to an USB disk.
- the disk is offered n partitioning and can be set up for installation.
However, the installer offers to install grub on (hd0) which is the
internal drive.
- the installed grub is configured to load kernel from (hd1,1) but the
USB dis
Public bug reported:
When running the installer it tries to mount the existing partitions to
scan them for importable accounts. It does so without any warning an
replays the journals. In case these partitions contain a suspended Linux
or other OS this cannot work out well.
To reproduce:
- run t
On 02/05/07, Marco Rodrigues <[EMAIL PROTECTED]> wrote:
> You run the installer from LiveCD ?
>
Yes, I chose the standard x86 install CD while downloading which
appears to be the LiveCD.
--
installer corrupts suspended system
https://bugs.launchpad.net/bugs/111847
You received this bug notificati
On 02/05/07, Till Kamppeter <[EMAIL PROTECTED]> wrote:
> I got an answer from upstream.
>
> Please set up a print queue choosing the Canon BJC-8200 as your printer
> model and Gutenprint as the driver. Do you get correct printouts then?
>
Yes, in 600dpi the printout is 1:1 (which is probably the ex
On 02/05/07, Till Kamppeter <[EMAIL PROTECTED]> wrote:
> How does the printer behave for 300 and 1200 dpi?
>
For the default resolution the printout was about twice as large as
the page. I am not sure what the default resolution was.
gnome-cups-manager showed something like "selected by media type"
On 30/04/07, Michal Suchanek <[EMAIL PROTECTED]> wrote:
> On 30/04/07, Pascal De Vuyst <[EMAIL PROTECTED]> wrote:
> > Thanks for your bug report.
> > You are not providing enough information for us to see the problem.
> > Can you be more specific and describe t
OK, I tried to print in all three resolutions. 300dpi and 600dpi works,
1200dpi printout is twice as large as it should be. It is the default
:-S
--
printing on Canon S300 is broken
https://bugs.launchpad.net/bugs/110945
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Binary package hint: scim
There is something wrong with scim on Ubuntu.
Firstly it probably got pulled in because I tried to do a setup in
Japanese until I got to a page where pictures and device names were not
enough to guess what the setup means, and switched back to an
in
On 03/05/07, Ming Hua <[EMAIL PROTECTED]> wrote:
> Hi Michal,
>
> Thanks for reporting this. However there are quite some important
> information missing from your report, so please answer the following
> questions:
>
> 1. Which Ubuntu release are you using? Since you said the Japanese
> language
*** This bug is a duplicate of bug 3731 ***
https://bugs.launchpad.net/bugs/3731
The debconf script for xserver-xorg is not very good for reconfiguration
after hardware change. It won't detect the card driver, and it always
asks useless questions about keyboard and modules.
--
when I change
Public bug reported:
Binary package hint: firefox-launchpad-plugin
Ofter upgrade from firefox 2.0 to 2.0.0.3+0dfsg-0ubuntu0.6.10 firefox would no
longer start. In terminal it printed Flushing, a buch of URLs, and this error:
resource:The program 'Gecko' received an X Window System error.
This pr
With xorg just after 7.2 RC release and line acceleration disabled
Radeon 9250 is stable.
Looks like the line acceleration is broken and causes most of the
lockups.
--
graphics lockups with radeon DRI
https://launchpad.net/bugs/63503
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
htt
On 4/4/07, Steven Harms <[EMAIL PROTECTED]> wrote:
> Can you reproduce this bug on Feisty?
>
> ** Changed in: dpkg (Ubuntu)
>Status: Unconfirmed => Needs Info
>
> --
> dselect displays garbage in cs_CZ.UTF-8 locale
> https://bugs.launchpad.net/bugs/11922
> You received this bug notificatio
Public bug reported:
I upgraded Firefox from 1.5 to 2.0, and I was unable to access ssl sites
after that. Firefox would say that it does not know how to communicatee
with the server.
Upgrading libnss and libnspr to 2.0 and reinstalling firefox solved the
problem.
** Affects: firefox (Ubuntu)
For me UUID does not work either. It is probably because my kernel does
not have an initrd, and cannot decode the gibberish by itself.
And no, the Ubuntu kernels are not good enough. If I want a new or
updated module I have to compile my own (and only then I install a
different kernel - otherwise
by aptitude
--
after upgrade from 1.5 to 2.0 ssl stops working
https://launchpad.net/bugs/74993
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I only pointed aptitude to the new repo. Is that not supported?
If not then this is not a problem, technically.
--
after upgrade from 1.5 to 2.0 ssl stops working
https://launchpad.net/bugs/74993
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo
What kind of monitor are you using with the mga card?
There are lots of problems when using dvi digital panels with Matrox
cards.
Anyway, if you do see something it is different from original problem.
--
Edgy upgrade breaks multiple Matrox cards
https://launchpad.net/bugs/58721
--
ubuntu-bugs
Yes, I cannot see anything with Matrox G400 AGP with the Edgy driver and
cannot install Edgy either (it probably uses X in installer).
I compiled latest drm/mesa/mga, and it works quite well. OpenGL works for me
even better than with the Dapper driver.
However, the latest drivers tend to crash
Not necessarily. It is just just another condition that should be
checked before the options are converted. The current script converts to
UUIDs unconditionally afaict.
So far there are
- duplicate UUIDs
- kernels without initrd
The script should also warn when there is UUID already and one
I never thought Edgy repository is 3rd party.
--
after upgrade from 1.5 to 2.0 ssl stops working
https://launchpad.net/bugs/74993
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Changed in: firefox (Ubuntu)
Status: Rejected => Unconfirmed
--
after upgrade from 1.5 to 2.0 ssl stops working
https://launchpad.net/bugs/74993
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
well, I guess this will be resolved by the ssl lib soname change
mentioned in another bug.
--
after upgrade from 1.5 to 2.0 ssl stops working
https://launchpad.net/bugs/74993
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
What you are seeing is different. For you no driver loads, and you
probably need an updated intel driver for that device.
For me the nv (or nvidia) driver loads but fails to drive the card.
--
GeForce 6200 - X server refuses to start
https://bugs.launchpad.net/bugs/370234
You received this bug
8 months from "release" of the fix the cups in Intrepid is still broken.
** Changed in: cups (Ubuntu Intrepid)
Status: Fix Released => Confirmed
--
Landscape PDF printed as portrait (and truncated)
https://bugs.launchpad.net/bugs/47649
You received this bug notification because you are a
2009/10/12 Till Kamppeter :
> Michal Suchanek, can you please attach the PDFs which print incorrectly
> and tell how you created them?
Sorry, I was not clear enough.
In a previous comment the fix was "released" in cups 1.3.9-2ubuntu6 or
such but the package is nowhere to be foun
Sorry, I checked the sources again and I had inly sources configured for
updates and the package was no longer in proposed.
** Changed in: openoffice
Status: Invalid => Fix Released
--
Landscape PDF printed as portrait (and truncated)
https://bugs.launchpad.net/bugs/47649
You received thi
Sorry, I checked the sources again and I had only sources configured for
updates and the package was no longer in proposed.
** Changed in: cups (Ubuntu Intrepid)
Status: Confirmed => Fix Released
** Changed in: openoffice
Status: Fix Released => Invalid
--
Landscape PDF printed as
ScanJet 5300C works for me on Intrepid but scanning on it crashes xsane.
--
HP ScanJet 5300C doesn't work
https://bugs.launchpad.net/bugs/83587
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@list
Public bug reported:
Binary package hint: xsane
XSane detects the scanner, the scanner appears to scan but XSane
crashes.
It may be a more general XSane problem, people report crashes with
various scanners and the reports are closed for lack of information.
Backtrace:
(gdb) bt
#0 0xb7c2144a i
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/33750721/Dependencies.txt
--
xsane crashes during scanning
https://bugs.launchpad.net/bugs/452447
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs m
This is resolved by upgrading to Debian testing libsane and xsane.
Upgrading libsane resoves the crash but the scanner locks up when the
receive progress bar reaches a particular point.
Upgrading both libsane and xsane seems to resolve the problem
completely.
I had to upgrade apt as well because
It seems the scanner lockups are related to the selected scanning
resolution.
Scanning in 100, 1200 and 2400 dpi works but 150 dpi (the default) locks
up the scanner - the data transfer stops at certain point and the
scanner moves the lamp back, starts flashing the lamp, and has to be
power-cycled
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/34278845/Dependencies.txt
--
does not start
https://bugs.launchpad.net/bugs/459334
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubu
Public bug reported:
Binary package hint: gnome-terminal
$ gnome-terminal
gnome-terminal: symbol lookup error: gnome-terminal: undefined symbol:
vte_terminal_set_alternate_screen_scroll
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 8.10
Package: gnome-terminal 2.24.1.1-0ubuntu1
Proc
Hmm, it's caused by installing apt from Debian testing.
** Changed in: gnome-terminal (Ubuntu)
Status: New => Invalid
--
does not start
https://bugs.launchpad.net/bugs/459334
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
I don't have the card at hand so I cannot easily re-test.
However, the card is not of some hybrid type ad it is detected
correctly, the X driver just fails to initialize it on some hardware.
--
GeForce 6200 - X server refuses to start
https://bugs.launchpad.net/bugs/370234
You received this bug
The kernel bugzilla response is:
The vmwgfx kernel module does not support devices without the pitchlock
capability. Sorry. In that case you need to use the xf86-video-vmware
driver standalone without kernel modesetting.
So presumably this is some capability to be added to the qemu device
--
Yo
Also http://airlied.livejournal.com/69291.html
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1037606
Title:
vmwgfx does not work with kvm vmware vga
To manage notifications about this bug go to:
ht
the MATE themes include a plain dark theme.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/158392
Title:
Ubuntu need a dark theme and background
To manage notifications about this bug go to:
https:/
There are two issues here:
cu randomly identifies the serial connection as dialin (nortscts) ot
dialout (rtscts). I don't care about that distinction being broken. I
fix that with the patch.
The other problem is 'line in use' which is caused by running cu as
root. The permission issues are discus
well, the problem is not that repacked images do not work but that
kernel panics when accessing such repacked image.
EIhter way, linux 2.6 is obsolete by now and hopefully future kernels do
not have such bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I tried to build a package that depends on fig2dev and the build daemon
says it's not installable:
https://launchpadlibrarian.net/281593756/buildlog_ubuntu-xenial-i386
.sane-backends_1.0.26-git20160803-xenial0_BUILDING.txt.gz
I have the package installed locally so what give
Well, the resolver is a mess.
That's regardless of multiarch.
That's a bunch of separate issues.
Maybe it does work worse on multiarch but it works poorly under any
conditions so it's hard to tell.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
Xorg reports wrong screen size by design. See bug 23705
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/201491
Title:
Screen DPI detected incorrectly by xdpyinfo
To manage notifications about this bu
On 27 April 2012 11:12, Daniel Hartwig <831...@bugs.launchpad.net> wrote:
> ** Description changed:
>
> TEST CASE:
> 1. Enable multiarch (should be automatic on new oneiric systems)
> 2. Install an i386 package on amd64 (like flashplugin-installer:i386)
> 3. Mark something with a lot of depende
On 3 April 2012 23:12, Shahar Or wrote:
> Dear Anders, Philip, Michal, Friends,
>
> I've filed individual bugs for the two issues that you mentioned,
> Anders.
>
> Is there a "Well, the resolver is a mess." bug report :) ? Really, is
> there? Launchpad or upstream Debian? Please give pointers if y
On 13 March 2012 03:26, Daniel Hartwig <831...@bugs.launchpad.net> wrote:
>> 3. each available architecture of packages that are available only in
>> foreign architectures as ":"
>
> Ok, this may prove more useful than what I was considering (only show
> the first such architecture).
>
>> The reaso
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/933556
Title:
aptitude is totally unusable due to rolling list of internal errors
To manage notifications about this bug go to:
https://bugs.launchpad.n
Public bug reported:
Errors like this keep rolling on the screen making the aptitude UI
totally unusable.
Internal error: the solver Install(upstart 1.4-0ubuntu7 {
upstart 0.6.6-3 upstart 0.6.6-4 upstart 0.9.7-1 upstart 1.3-0ubuntu10 upstart
1.3-0ubuntu11 upstart 1.4-0ubuntu7 upstart 1.4-0ubun
Public bug reported:
Oneiric dpkg aborts.
Since Precise dpkg does not I guess the simplest fix is to just import
the new version
Setting up libx11-doc (2:1.4.99.1-0ubuntu1) ...
dpkg: ../../src/packages.c:229: process_queue: Assertion `dependtry <= 4'
failed.
E: Sub-process /usr/bin/dpkg exited
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/934112
Title:
dpkg aborts
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/934112/+subscriptions
--
u
2012/2/17 Raphaël Hertzog :
> You fixed the problem a bit too quickly... now tell me how can I
> reproduce it?
Setting up dpkg (1.16.0.3ubuntu5) ...
# aptitude reinstall wine1.4{,-i386,-amd64} wine1.3
The following packages will be REINSTALLED:
wine1.3 wine1.4 wine1.4-amd64
0 packages upgraded,
I suspect that once packges get backported to oneiric whatever trigggers
the issue might get backported as well or some other packages might
trigger it. As it is fixed in newer version I also suspect it was
already diagnosed and fixed, hence re-diagnosing it is redudndant.
** Attachment added: "th
101 - 200 of 521 matches
Mail list logo
