damn,
i bought this thing for $40.00 bucks,
even has a picture of TUX on the back card board.
On Fri, 17 Oct 2003, Zoki wrote:
> Le 17/10/2003 00:07, « Steve Lee » <[EMAIL PROTECTED]> a écrit :
>
> > has anyone got this to work, if so, where is the documents
> > for
has anyone got this to work, if so, where is the documents
for this so i can get it to work ?
thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
ll install redhat 9 if you use RAID 0, 1,
10. So i went a head and installed redhat 9 using 2 40Gb drives in RAID
1. then i went ahead and setup 3 200 GB drives using RAID 5. Linux
crashes when you try to fdisk the RAID 5. thats it.
On Wed, 17 Sep 2003, Steve Lee wrote:
> Has anyone tried
Has anyone tried using a 3Ware Escalade 6800
with some 200GB drives with any version of
RedHat linux version ?
i have tried both 7.3 and 9, but the system
gets all kinds of errors right after i initialize
the drive.
anyone successful using this ?
Thanks.
--
redhat-list mailing list
unsubsc
i would like to make it appear like two different computer,
but most importantly, make sure it is using both, nic
so i can get a full 200Mbits out
On Wed, 27 Aug 2003, Jonathan Bartlett wrote:
> > an ip will be assigned to both nics on the same subnet.
> > how would i setup the route so that tr
i am trying to use two separate nics.
an ip will be assigned to both nics on the same subnet.
how would i setup the route so that traffic coming in from
one nic is passed back out the same nic. ??
it appears that it travels back the same route ( eth0 )
that is set for the default route.
than
Question, i have a server that i would like to use
two nics. i have two ips that are on the same subnet
and they both have the same default route.
how do i tell traffic that comes to one ip that is assigned
to eth0 to go back through eth0 and one ip that is assigned
to eth1 to go back trhoug eth
is RRDtool better then MRTG ?
On Fri, 30 May 2003, sentinel wrote:
> Personally for a web/gui based tool I really like MRTG. I understand that
> it will soon be going away (if it hasn't already) in favor of it's bigger
> brother RRDtool. Basically using SNMP to pull from your SNMP enabled
>
anybody know this?
i had created some useraccounts on my system.
skipped some id to reserve some numbers and all users
logged in is now know only by UID not by the name
1010 14785 0.5 0.0 2536 1372 pts/3S14:06 0:00 -bash
1010 14825 0.0 0.0 2764 844 pts/3R14:06 0
that worked.
not sure how i installed two kernels of the same
they were the "athalon"
On Fri, 14 Mar 2003, Michael Schwendt wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Fri, 14 Mar 2003 12:22:34 -0800 (PST), Steve Lee wrote:
>
> > i'm tr
i'm trying to clean up my rpm database and upgrade
to a new kernel. however, when i do a
rpm -qa | grep ^kernel
i get two of the same kernel
kernel-2.4.18-19.7.x
kernel-2.4.18-19.7.x
when i try to delete one, i get an error
rpm -e kernel-2.4.18-19.7.x
error: "kernel-2.4.18-19.7.x" specifi
[EMAIL PROTECTED] wrote:
> > | > On Fri, 7 Mar 2003, Steve Lee wrote:
> > | > > In SecureCRT, (windows people) can send a packet every so many
> > | > > hours, to keep it alive, anyone with any ideas on doing this
> > | > > is Xwindows ?
&g
Does anyone have a solution to haveing a xterm timing out
when connected remotely to a system? i would like my terminal
to stay connected, but i guess our VPN to our colo is timing out
and disconnecting all my connections.
In SecureCRT, (windows people) can send a packet every so many
hours, t
what happened to rpm -ba on redhat 8.0 ?
trying to rebuild an rpm for redhat 8.0
thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
On 10 Feb 2003, Joshua Schmidlkofer wrote:
i would like a feature that does something where it would send the
username password. not pub/private keys.
anyone know.
thanks.
> On Mon, 2003-02-10 at 00:46, Todd A. Jacobs wrote:
> > On Sun, 9 Feb 2003, Steve Lee wrote:
> >
&
anyone know of a gui ssh program for linux ?
why? like secureCRT or other windows ssh clients
i would like to be able to click on host that i can log
into and have the password saved so i don't have to type it
in from the command line.
i'm not talking about public/private keys.
i would lik
does anyone the the break sequence in xwindows
using xterm, kterm,
i'm trying to send a break to the terminal but
can't figure it out.
i know how to do it in minicom but i need to do it
using the terminal
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
anyone know how to output an iso image to disk
and not a CD.
Thanks.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
thanks. i will look into this.
On Wed, 15 Jan 2003, Alan Peery wrote:
> Steve Lee wrote:
>
> >anyone been able to get the serial port
> >working on this laptop. I've been unable to get this to work.
> >i could really use this to connect to hardware for console us
anyone been able to get the serial port
working on this laptop. I've been unable to get this to work.
i could really use this to connect to hardware for console use.
thanks.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailm
make a rbash script
and do
#!/bin/bash -r
On Mon, 9 Dec 2002, Todd A. Jacobs wrote:
> On Sat, 7 Dec 2002, Hella wrote:
>
> > What happened to the old fashioned rbash and rksh? I need to set some
> > user login shells to a restricted shell, (which restricted shell I do
>
> Red Hat may not h
anyone know of a good linux client to connect
to sybase/MSSQL, almost something like
Oracle Enterprise manager.
Thanks.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
access-list 101 deny ip 10.0.0.0 0.0.0.255 any
access-list 101 deny ip 127.0.0.0 0.0.0.255 any
172
192
224
don't forget to
On Sun, 10 Nov 2002, Robert Canary wrote:
> I'm really sorry for this far off post...
>
> I am tryi
any one know a good aaa or radius server software
for linux ? are there any opensource software for this?
thanks
--
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
how do you create an up2date server.
or better where to find some good docs on it.
thanks
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
what happened to Xconfigurator in Redhat 8.0
how does one setup Xwindows in Redhat 8.0.
thanks.
i skipped all that during the install.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
it is not free redhat that is the problem, but you not being
able to compile the kernel correctly. don't bash redhat
for that. i have been able to get it working without a problem.
plus i found a rpm package somewhere on the net for the kernel
with ipsec for redhat.
On Sat, 6 Jul 2002, Brian
my rpm database seem to have !#@d up. i tried to do a
rpm --rebuilddb
but that didn't seem to update the database of rpm's
installed on my box. When i do a rpm -qa
i only see like 22 packages, which is wrong. I should have
around 240 packages installed. how can i go about
fixing this by up
anyone try using one of those usb
external harddrive under linux ?
i'm looking to buy one to backup
my data. thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
Jon
>
> On Wed, 22 May 2002, Steve Lee wrote:
>
> > thanks. that is awsome.
> >
> >
> > On Wed, 22 May 2002, Jonathan Bartlett wrote:
> >
> > > > anyone know of brand of products so i can have remote
> > > > console access to both
thanks. that is awsome.
On Wed, 22 May 2002, Jonathan Bartlett wrote:
> > anyone know of brand of products so i can have remote
> > console access to both LINUX and SPARC Boxes.
> >
> > I'am looking for a way to be able to reboot the boxes,
> > look at the system as it boots to trouble shoot in
anyone know of brand of products so i can have remote
console access to both LINUX and SPARC Boxes.
I'am looking for a way to be able to reboot the boxes,
look at the system as it boots to trouble shoot in the
bios if needed, anything i can do from the console.
This hardware will be needed to su
my 2 cents.
smtp auth is cool, however, users are stupid and can't
set it up. My clients can't even find this in their outlook,
netscape that i had to go back to pop before smtp.
On Sun, 19 May 2002, Anthony E. Greene wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 19-Ma
why not go ahead an implement OpenLDAP?
it is a lot better and supersedes the nis stuff.
also, it uses TLS/SSL which is a plus.
in addition, I have my samba passwords stored in OpenLDAP
where that is also used to auth samba users.
not sure if nis does samba too.
just a idea.
On Wed, 15 May 20
t /var/yp/Makefile.
>
> I am not sure which NIS packate/errata/version contains the
> Non-FreeBSD support. Anyone?
>
> -Original Message-
> From: Steve Lee [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 14, 2002 4:38 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Sola
never used nis.
but used ldap.
try this on your solaris box to see if it returns user info.
"getent passwd"
or can you finger a user at all in solaris from users in the nis
database ?
On Tue, 14 May 2002, Isaac Liu wrote:
> My solaris 2.8 nis client (nis server is linux) wont do logins
> for
what is a good way to find out what packages
are dependant on certain package ?
i.e. i need to recompile php and install it.
but what will break ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
cat /etc/redhat-releases or /etc/redhat-release
well something like that.
On Thu, 25 Apr 2002, Steve Buehler wrote:
> How can I tell what version I am running on a Redhat server. I know how to
> get the Kernel version, but don't know how to find out if it is Redhat 6.1,
> 6.2, 7.1, etc..
LDAP works great for this.
except i putting roots password in LDAP is not a good idea.
On Fri, 19 Apr 2002, vincent li wrote:
> hi, all
>
> i am maintaining more than 20 server's password file,
> regularly, i need to change every server's root
> account password every 1 month, it is a heavy
looks like i get this message from sshd in the syslog
how do i get rid of this ?
sshd[pid]: Did not receive identification string from xxx.xxx.xxx.xxx
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat
is there some kind of software out there to
create documents for the web from word?
almost like the HOWTO but browseable on the web.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
turn off x forwarding in the ssh config somewhere in /etc/ssh/
On Mon, 11 Mar 2002, Scott Sharkey wrote:
> Hi All,
>
> I'm trying to stop X from listening on port 6000 (RH 7.2). I have
> put the --nolisten tcp option on the command line in both
> /etc/X11/xdm/Xservers and in the /etc/X11/gdm
would the later distributions src rpm compile
under RedHat 6.2 ?
or am i just stuck without it ?
On 20 Feb 2002, Trond Eivind Glomsrød wrote:
> Steve Lee <[EMAIL PROTECTED]> writes:
>
> > where is the RedHat 7.0 openssh stuff.
> > can't find it anywhere.
>
where is the RedHat 7.0 openssh stuff.
can't find it anywhere.
redhat doesn't seem to have it on there site.
On Wed, 20 Feb 2002, Emmanuel Seyman wrote:
> On Wed, Feb 20, 2002 at 09:28:59AM -0800, Steve Lee wrote:
> >
> > what is the best way to do this.?
>
i have a raid system running RAID 4.
i just added 2 extra drives.
i was able to have my icp vortex raid
controller expand the drives on the RAID.
now i'm trying to use gnu parted to expand
my last partition from a 40Gig to add the
approx +2*18gigs that i added to give
around a 70gig partiton on
what is the best way to do this.?
is there packages availible to install
or do one have to compile from scratch.
if so, where can i find docs on this.
Thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo
i had to install a older version of rpm package
binutils. i forced the install. now i need
to revert back to the same version of binutils
that came with RedHat 7.2 Howver, when i
do a rpm -Uvh --force --nodeps binutil-
it appears it is doing it. When i then
do a rpm -qa | grep bintutil
.
>
> On Mon, 18 Feb 2002 [EMAIL PROTECTED] wrote:
>
> > What kind of help is this! If you can not do better than
> >
> > Sendmail. Read the documentation, why bother?
> >
> > On Sun, 17 Feb 2002, Ashley M. Kirchner wrote:
> >
> > > Steve Lee wro
i just installed a fresh RedHat 7.2
setup sendmail, qpopper, and dns.
all of a sudden, i see port 587 and 987 listening.
i have sendmail setup with qpopper with Drac.
does anyone know what these ports are LISTENING.
how to turn it off ?
Thanks.
__
RedHat people, where can i find some document on
this. Is this a standard pam module ? or something
redhat uses specifcally when you use authconfig.
Thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinf
thanks.
no, just a standard at work that they comment out /etc/issue.net
i also did a cat /pro/versions but it didn't tell me the redhat release.
On Tue, 12 Feb 2002, Ed Wilts wrote:
> On Tue, Feb 12, 2002 at 11:09:16AM -0800, Steve Lee wrote:
> > how do you find out the ver
how do you find out the version of redhat
if your /etc/issue is erased.? ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
This is what i do at home.
i do have wireless, have dhcp setup.
however, dhcp is only setup to allow one machine to
connect, my laptop, with only my mac address, to bind.
so it only allows my computer to connect dhcp.
others are all static. i only use ssh, and of course
browse the web at home.
i have no clue on this.
will write again about this soon.
On Thu, 7 Feb 2002, Alan Peery wrote:
>
> Steve Lee wrote:
>
> > i don't have /etc/cron.allow or /etc/cron.deny
> > so all users will be able to run cron.
> >
> > What happened differently is t
cron doesn't work when a user is authenticated by ldap
On Tue, 5 Feb 2002, Anthony E. Greene wrote:
> On Tue, 5 Feb 2002, Steve Lee wrote:
> >does anyone here on this list use
> >RedHat Linux and OpenLDAP ??
>
> Sure. What&
ot;service crond restart"
>
> - Original Message -
> From: "Steve Lee" <[EMAIL PROTECTED]>
> To: "Steve Lee" <[EMAIL PROTECTED]>
> Sent: Tuesday, February 05, 2002 11:57 AM
> Subject: Cron
>
>
> > all of a sudden my cron does
ll run the first job that
it finds at the right time and stop there after.
On Tue, 5 Feb 2002, Lynne Lawrence wrote:
> Steve Lee wrote:
>
> > all of a sudden my cron does not run any of the cron
> > for every users. even root. how do i trouble shoot
> > this. the logs
does anyone here on this list use
RedHat Linux and OpenLDAP ??
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
all of a sudden my cron does not run any of the cron
for every users. even root. how do i trouble shoot
this. the logs in /var/log/cron say it is running
but nothing actually is runing.
i even setup a dummy test script that would touch
a the date to a directory. This does not happen.
any i
what is the linux rawhide. i see it on rpmfind.net
is is able to install on redhat linux too if i download this. ?
On Wed, 30 Jan 2002, Needham, Douglas wrote:
> Is this the correct forum for asking questions about the latest rawhide
> kernel?
>
> Doug Needham
>
>
>
> _
I'm trying to redirect some website using
mod_rewrite but can't seem to get the RewriteCond
working.
I have a domain with lots of host name.
such as.
domain.com
www.domain.com
aaa.domain.com
bbb.domain.com
ccc-aaa.domain.com
ddd.domain.com
and would like to redirect all these to
a http://new.d
I'm looking into buying a new laptop.
I have looked at the Dell Inspiron 8100 with
the 64 megs Radion Video card. How well does it
run linux Redhat with Gnome ? any problems.
wireless too ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://li
i need some help.
i have openldap setup to authenticate users instead of using
the local system. Howver, all users can log into a system
that is an ldap database that a client is setup for ldap
authenication. How can i setup ldap to allow users to
access certain machines and not all.
Please he
thanks.
thats great stuff.
On Thu, 17 Jan 2002, Devon wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Thursday 17 January 2002 04:17 pm, Steve Lee wrote:
> > i have redhat 7.1 which i need to have sendmail.
> > however, after i rpm it there are
i have redhat 7.1 which i need to have sendmail.
however, after i rpm it there are two failed dependencies.
what package do i need to install to fullfill sendmail.
if do a nodeps, sendmail doesn't work. what do i need
to install.
error: failed dependencies:
liblber.so.2 is needed b
is there a way to check for some sort of
md5sum for packages that are already installed
on a system. ??
Thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
how to allow server status with all these info below?
I set up another apahe web server and some of the info below
are missing such as Total Accesses, Total kBytes, etc, how do
i allow these. I just compiled apache 1.3.20 and trying to set
up the apache server-status.
Total Accesses: 11732
Tot
thank you.
i will use 2.4.16
On Sun, 16 Dec 2001, Monte Milanuk wrote:
>
>
> On Sun, 16 Dec 2001, Steve Lee wrote:
>
> > i erased all my messages, was there a
> > thread about kernel 2.4.16 causing
> >
i erased all my messages, was there a
thread about kernel 2.4.16 causing
corruption ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
How do you set the max for all process ?
On Fri, 14 Dec 2001, Hahnel William J wrote:
> Hello,
>
> I'm running 7.1 with kernel 2.4.2-2. How do I find what the maximum number
> of open files per process is set to?
>
> Bill Hahnel
> [EMAIL PROTECTED]
>
>
>
__
i have two subnets. the linux box being the route
between the two subnets. this seems to slow down
the connection between the two subnets going through
linux. is there a way to setup redhat to do some
static route that may make it faster for machine
to transfer file between the two subnets with
i have LDAP working as a central
authentication for other servers.
How can i set it up as to allow,
restrict users to certain machines.
It seems to allow users to log into
any machine.
Thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https:
does anyone know what service runs on
these ports on a Redhat machine ?
or know what service it is ?
thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
mine had this
O DaemonPortOptions=Port=587, Name=MSA, M=E
does anyone know if 587 needs to be listening ?
On Tue, 4 Dec 2001, Martín Marqués wrote:
> On Mar 04 Dic 2001 18:28, you wrote:
> > Hi Martín,
> >
> > On Tuesday, December 04, 2001, 4:22:24 PM, you babbled something about:
> >
> > M
I have a Samba PDC, default group is 100,
however, some users need access to share group 200
others need access to backup group 300
On Tue, 4 Dec 2001, Cameron Simpson wrote:
> On Mon, Dec 03, 2001 at 09:21:44PM -0800, Steve Lee <[EMAIL PROTECTED]> wrote:
> | Does anyone know wha
Does anyone know what the maxium number
of user one can assign in a group created in linux.
how can one organize the group file to
add over 200 users in a group without
using one line. ie.
groupid:x:100:user1,user2,user3,..,user200
___
Redhat-li
Can someone tell me what this is in RedHat.
Purpose, wher to find some docs.
Thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
my bad. next time i will not write at 2:00 AM
On Wed, 28 Nov 2001, Rodolfo J. Paiz wrote:
> At 11/27/2001 01:55 AM -0800, you wrote:
> >You have to rebuild the sendmail.cf with the sendmail.mc from /etc/mail
> >if you don't know how to do it just ask but basically you need sendmail-cf
> >and
1. make sure you share your drives in Windows . ( you probably did )
2. this is the command i use, replace the mounts with yours
mount -t smbfs -o username= //Windows/mountpoint /mnt/win
3. it should ask for a password for the current loggin.
4. try it even with the -o username and type
telnet into port 25 and see if it accepts connections from the local
locp first. see if sendmail is running. are you sure it is running.
do a netstat -an | grep 25 look for senmail listening on port 25.
Then we can go from there.
On Sun, 18 Nov 2001, Ashwin Kutty wrote:
>
> I did a fresh i
Okay. the upgrade has really broken my mail server.
Luckily i can still use it but make no modification.
I was able to Drac to work by reinstalling the
version of sendmail-8.11.0-8.i386.rpm.
When i remake the btree for all the generic and virtual
user table, it still doesn't work. I thnk i need
Sorry for this question. I really need a POP to SMTP authentication
for my pop server. I have been using the drac version of sendmail
and everything was perfect until now. I just realized that
all works perfect until i need to rebuild the virt user table and
everything breaks. So, i can't no
Let me try to explain. I have been able to upgrade from
since RedHat 6.2->7.0->7.1 and have mail work without
a problem. Since my upgrade to RedHat 7.2, i have discovered
that i can no longer modify the Generics table, access, Virtual
User table, or any thing. However, the mail server still
I have a question for people using multiple
Unix systems at work.
I am looking for a "centralized" password
server for the Unix and maybe even incorporating
Windows machine using samba. What have most people
setup in there working environment that works best.
I would like to just managed one
where is the file that i can
setup useraccount to start at
a specific USER ID.
Thanks
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
I have linux setup with multiple
subnets in /24 range. how would
i stop the display of netbios (machine)
from showing up on peoples desktop?
i have my filters blocking access
to different subnets using iptables
at the PREROUTING part, works.
However, i would not like the the
netbios names dis
does any one have this tar ball
i'm trying to learn how to make
vcd's but need this tool to make
it. all links seem broken on the net
vcdtools-0.4.tar.gz
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redh
since no one is answering this.
i noticed that RedHat 7.2 comes with mrtg already installed.
if you want mrtg, upgrade to 7.2. be the easy way.
On Sat, 10 Nov 2001, Gordon Stewart wrote:
> Dear List
>
>
> I am installing MRTG on my RH7 box. When in install GD, a module for MRTG
> to run I
Can someone please explain this to me
or where i can find some information
on this.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
does anyone know if partition magic
can resize a ext3 filesystem.
need to resize my filesystem.
so i can go buy one instead of
redoing my system from scratch
thanks.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/
I got my hands on some dual
FDDI cards. It looks like
Linux already has support for these
puppies, however, i can't get the
dang thing to come up with an
ip address. the kernel modules
is skfp and is loaded. when i
try to ifconfig a ip address to it
it gives me SIO... errors.
has anyone u
has anyone attempted to
compile kernel 2.4.14 with
the ext3 patch ?
i enabled the ext3 and debug.
i get this error when i boot up.
request_module[block-major-3]: Root fs not mounted
VFS: Cannot open root device "hda6" or 03:06
Please append a correct "root=" boot option
Kernel panic: VFS: Unab
try IPSEC and Frees
i wouldn't call it simple, cause you have
to patch the kernel and recompile. ?
On Mon, 12 Nov 2001, Derek Del Conte wrote:
> Hi,
>
> I am thinking about setting up what I would consider a simple VPN. I have
> two IP'masqed RedHat 7.2 boxes at two locations. I want
Question about Virtual User table.
I have two accounts on my machine with a username
of "stevelee and "one". I can send all emails
that i want to the username "one" but the email
stevelee. Does anyone have any idea on how to get
this working. ? kind of confused if you have
a unix username t
Cron launches this script every so often
and my email fills up with a lot of these
below. How can a interpret this. or is
this normal.
Invalid system activity file: /var/log/sa/sa10
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.re
this is it.
define(`confMAX_MESSAGE_SIZE',`700')dnl
On Fri, 9 Nov 2001, Rodolfo J. Paiz wrote:
> At 11/8/2001 09:13 PM -0700, you wrote:
>
> >set MaxMessageSize in /etc/sendmail.cf
>
> Where do I look for an equivalent directive to be placed in sendmail.mc?
>
>
> --
> Rodolfo J. Paiz
>
i upgraded DNS to the newer version of Bind
9.1.3. when i start Bind. i get this
error below for just this zone called foo ( not really foo )
works fine in version 8.2.X
dns_zone_load: zone foo.com/IN: loading master file
foo.com: permission denied
I have migrated some to ext3 without a problem.
it is pretty simple, since you already
have ext3 support in your kernel, right ?
if that is the case, this is what you need to do.
1. tune2fs -j /dev/hdXX
# what this does is makes a journal for your ext2
2. tune2fs -i 0 -c 0 /dev/hdXX
# not
it happens to me to on both Redhat 7.1 and 7.2
however, i keep on doing the install and
it finally takes it. switch from
all, to some etc...
On Thu, 8 Nov 2001, Avi Aumick wrote:
>
> I just upgraded my RH7.1 to RH7.2. Since I had Ximian installed for 7.1 I
> am trying to re-install Ximian for
bove the set limit.
>
> More information on the settings can be found at
> http://www.sendmail.org/m4/tweakingoptions.html.
>
> Hope this helps,
> Ty
>
> ----- Original Message -
> From: "Steve Lee" <[EMAIL PROTECTED]>
> To: "Steve Lee"
1 - 100 of 286 matches
Mail list logo
