I have the following instructions from
http://www.astaro.com/doc/burn-howto_en.html
The most efficient and easiest way is to type the following command:
cdrecord -v dev=DEVICE fs=4096k -eject -pad -useinfo -dao -data
Astaro_Security_Linux_ISO_IMAGE
(or easier: cdrecord -v dev=DEVICE -data
Astaro_S
> - WinNT 4.0 (did not test)
Works like a charm.
> - Linux 2.x (Installed caldera openlinux 2.4 and RedHat with x on my debian
> woody, no complaints)
Add Suse, Turbo, Trustix, and Mandrake to that list.
Sam Morgan
I have my Deb box on a 192.168.1.xxx network which deb setup during
install.
I recently needed to change over to direct access (bypassing the
intranet) to the internet. I went into linuxconf and made the changes.
No Joy ... internet was inaccessable.
I have done this on a mandrake box and it worked
Hi all
I want to remove exim4.
When I type 'apt-get --purge remove exim4-base' debian report:
mail2:/var/log# apt-get remove exim4-base
Reading Package Lists... Done
Building Dependency Tree... Done
The following packages will be REMOVED:
exim4-base exim4-daemon-light mailx mysql-server
0 upgra
> -邮件原件-
> 发件人: Marc Wilson [mailto:[EMAIL PROTECTED]
> 发送时间: 2004年11月12日 15:09
> 收件人: [EMAIL PROTECTED]
> 主题: Re: how to remove exim4 without removing mysql-server?
>
> On Fri, Nov 12, 2004 at 02:46:31PM +0800, cwinl-debian-user wrote:
> > But my mysql
Hi,
I'm installing Debian on a Sun Fire V65x, which is basically an intel whitebox server.
It uses the SE7501WV2 board
(http://www.intel.com/design/servers/se7501wv2/index.htm?iid=ipp_srvr+mthrbds_se7501wv2_srvr&;).
The server has all sorts of fancy bells and whistles like e1000 cards and aic7
first of all, i would try using the 0.55 version of putty, that might solve
your problem
a list of mirrors is available at this address:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
viz
- Original Message -
From: "Michael Sims" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED
check if your cables are touching something else, i have that problem too
when my hard drive accesses the data, my speaker does a weird sound. if the
speakers are turned off, it wont do it, i have to see if i can put my wires
somewhere else
viz
- Original Message -
From: "H. S." <[EMAI
On 13-Feb-21 06:06, John Crawley wrote:
On 12/02/2021 17:16, Matthijs wrote:
On 12-02-2021 03:12, John Crawley wrote:
On 09/02/2021 21:40, Matthijs wrote:
Following the Debian Live manual on using a predefined
configuration(https://live-team.pages.debian.net/live-manual/html/live-manual/managi
nome
metapackage (as well the rhythm-plugins package, so you end up with a
nerfed Rhythmbox).
Is this thing safe? How does uninstalling it break functionality?
P.S. This package is also recommended by software-center.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a sub
ia or Google search using your search terms.
How do you remove Google and replace it with a search engine of your choice?
Thanks.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive
right away if you installed Debian using a Live installer.
If so, you'll have to mess around with some permissions first (because
your user account may not have the permission to invoke X from the
command line). But this should work quite well if you installed using a
standard i
ght
the version shipped by Debian doesn't delete the Zeitgeist database.
So, have you removed it completely from your system, or did you just
disable it? How does it break functionality on your end?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of &q
?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/53683e6c.4080...@openmailbox.org
On Tuesday, 06 May, 2014 09:11 AM, John Hasler wrote:
Theodore Alcapotaxis writes:
It seems that some folks at Debian have introduced NSA-friendly
software to spy on users.
Produce specifics.
On Monday, 05 May, 2014 08:13 AM, A Debian User wrote:
From the package description of zeitgeist
Yes, it can.
So can apt and synaptic.
These tools rely on the /etc/apt/sources.list file to point them to
servers where they can download the software you want.
Here's an example of an entry in sources.list:
deb http://ftp.debian.org/debian wheezy main
deb-src http://ftp.debian.org/deb
;s CPU. Is this safe, given that these microcode updates
reportedly patch up vulnerabilities in the these processors?
Even the Debian wiki (https://wiki.debian.org/Microcode) says that these
microcode updates are "not safe to ignore".
Cheers!
--
To UNSUBSCRIBE, email
On Friday, 09 May, 2014 02:16 PM, morteza allahpour wrote:
/Hello,I have 3 debian DVD images.I want to run debian from a bootable
usb flash.now what should i do ?/
/wich DVD image I must use ?/
The first one :)
rl+Alt+Del, etc.
Doesn't respond to pressing the power button. You either have to
long-press the power button to power down the computer and turn it back on.
Anyone having similar problems? Solutions?
Environment:
- Asus F3E laptop (old)
- Debian 7.5 Wheezy 64-bit
- GNOME Shell
--
To UNSUBSCR
tting the big packages from the DVDs might help).
Thanks :)
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/536d4a62.7080...@openmailbox.org
On Friday, 09 May, 2014 02:54 AM, Ric Moore wrote:
On 05/08/2014 02:16 PM, A Debian User wrote:
Hello, all!
I want to have a completely Free install of Debian, which means I will
only be using software packages from the main repo, and will be
excluding contrib and non-free from my sources
f Flash content?
So, shouldn't you just use NoScript, since it has more features and
additionally does what FlashBlock does, anyway?
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/5371461f.9050...@openmailbox.org
CRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/537516b2.2030...@openmailbox.org
On Mon, 15 Jun 1998, Ian Stuart wrote:
> To get a PCMCIA card to work, you need to remake the kernel, and the
> PCMCIA modules, and then reinstall the kernel.
>
> For this, you'll need the kernel source and the pcmcia source.
installing the kernel source is ok (2.0.32-5 from hamm), but how sho
Background-After an apt-get dist-upgrade from woody to sarge-stable
encountered many dependency issues.
Xserver-xfree86, kdm and many others were not installed. Ater manually
installing xserver-xfree86, kdm and the
kde package files and getting X started, I've these unresolved issues:
I can lo
Lee Braiden wrote:
On Tuesday 21 Jun 2005 18:20, Debian User Leonard Chatagnier wrote:
I can login to kde with 18-20 KNotify messages popping up and if I
select and click OK on the notification popup or
try to close out ktips, the system freezes up or at best operates in
super slow motion
David Martínez Moreno wrote:
El Martes, 21 de Junio de 2005 19:43, Debian User Leonard Chatagnier escribió:
Background-After an apt-get dist-upgrade from woody to sarge-stable
encountered many dependency issues.
Xserver-xfree86, kdm and many others were not installed. Ater manually
Gayle Lee Fairless wrote:
On Thu, 23 Jun 2005, Debian User Leonard Chatagnier wrote:
Gayle Lee Fairless wrote:
I just upgraded from the 2.4.18bf2.4 kernel, now LinuxOLD on my
LILO menu, to the 2.6.8 686 kernel available from sarge.
Unfortunately the 2.6 kernel gives me the
--- Kent West <[EMAIL PROTECTED]> wrote:
Leonard Chatagnier wrote:
> VFS: Cannot open rootdevice "301" or 30:01
> Please append a correct "root=" boot option
> Kernel panic: VFS unable to mount root fs on 30:01
> Ok, not worried at this time as I have my woody
CD's and can do a
> rescbf24 to
Kent,
Sorry about my mixup. Found the original reply in drafts; never sent.
This is new reply that is more current. My reply is bolow:
Leonard Chatagnier wrote:
VFS: Cannot open rootdevice "301" or 30:01
Please append a correct "root=" boot option
Kernel panic: VFS unable to mount root fs on
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Kent,
Sorry about my mixup. Found the original reply in drafts; never sent.
This is new reply that is more current. My reply is bolow:
Leonard Chatagnier wrote:
Kent West wrote:
Sarge's boot is hosed, but y
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Kent,
Sorry about my mixup. Found the original reply in drafts; never sent.
This is new reply that is more current. My reply is bolow:
Leonard Chatagnier wrote:
Kent West wrote:
Sarge's boot is hosed, but y
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Kent West wrote:
The line should be:
initrd=/initrd.img
I put the / in front of initrd.img and rebooted with kernel panic
again giving
these same boot messages:
VFS: Cannot open root device "301" or 03
Marty wrote:
Debian User Leonard Chatagnier wrote:
The output of cat /etc/fstab, cfdisk and lilo.conf are shown at the end
of this message.
Hi Leonard,
I looked over your files. First did you verify the links /vmlinuz
and /vmlinuz.old? Second, what happens when you boot using LinuxOLD
Edward Dunagin <[EMAIL PROTECTED]>
CC: Debian User Leonard Chatagnier <[EMAIL PROTECTED]>
On Thu, 23 Jun 2005, Edward Dunagin wrote:
let me see if i can help.
i am assuming you downloaded kernel-image-2.6.8-686.
if that is right, the download would have included
initrd.image-2.6.
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Sorry again. After I emailed my response, I realized I for got to run
lilo. So ran it and got this error:
ChatagnierL-Home:/home/lchata# lilo
Fatal: Image name, label, or alias is too long: 'Linux-2.4.27-2-386'
ChatagnierL-
Marty wrote:
Debian User Leonard Chatagnier wrote:
See below for links. Not sure what you mean by what happens when you
boot
using LinuxOLD. It boots normally as it did since first installed.
I do see that
Output module failed to load as was the case on my old sarge. If
your refering
to
Marty wrote:
Debian User Leonard Chatagnier wrote:
You can, if you will, tell me just how you remove a kernel(outline
the process).
Like any other package: "apt-get remove " or use aptitude,
dselect, etc.
I don't use the packaged kernels so I don't know but if it
Kent West wrote:
Debian User Leonard Chatagnier wrote:
The 2.4.27-2-386 kernel was forced on me by the dist-upgrade. I planned
on going to the 2.6.6-2-686 kernel and will eventually, probably
soon. Kent
finally fixed lilo for me so that sarge boots now if you haven't
already read it
Discovered wvdial and pon not working after finally getting the
2.4.27-2-386 KI to boot. Ran wvdialconf and
pppconfig which didn't change anything. Chmod a+rwx on all wvdial and
wvdial.conf files. Some Debians may
say that's not the way, but I don't want to use su and don't have to on
pon, so
--- Begin Message ---
Marty wrote:
Debian User Leonard Chatagnier wrote:
Discovered wvdial and pon not working after finally getting the
2.4.27-2-386 KI to boot. Ran wvdialconf and
pppconfig which didn't change anything. Chmod a+rwx on all wvdial
and wvdial.conf files. Some Debian
Marty wrote:
Debian User Leonard Chatagnier wrote:
Hi Marty,
Took out init3=ATDT, logged out KDE and back in and still getting
same wvdial error message, ie., no dialer
defaults.
This doesn't seem to appear in Bug #276020, so it looks like a different
problem.
So, shut dow
Fixed KPPP myself, little proud, looked at kppp-options
and noticed #noauth, uncommenting it fixed KPPP. But wvdial still broke.
Debian User Leonard Chatagnier wrote: (FROM ORIGINAL POST)
Discovered wvdial and pon not working after finally getting the
2.4.27-2-386 KI to boot. Ran wvdialconf and
pppco
n Mon, Jun 27, 2005 at 12:47:39PM -0500, Debian User Leonard Chatagnier wrote:
Many changes were made in the configuration files to no avail. The
current configuration files and errer messages
are below: (Note: I have pon working on sarge now but can't remember how
I got it now.)
Thank
Kent West wrote:
Debian User Leonard Chatagnier wrote:
n Mon, Jun 27, 2005 at 12:47:39PM -0500, Debian User Leonard
Chatagnier wrote:
Many changes were made in the configuration files to no avail. The
current configuration files and errer messages are below: (Note: I
have pon
Kent West wrote:
Kent West wrote:
I believe I'd purge and then reinstall wvdial, and maybe.
Don't you just love sentence fragments? They're so very.
Seriously, ignore the partial. I was going to say I might would also
purge/reinstall the ppp-related stuff, but then I remembered th
Gayle Lee Fairless wrote:
I'm having some of the same issues that Leonard has. The wvdial
doesn't appear to work on 2.6 kernels. I've scripted the tests as high as
kernel 2.6.12. It seems that the connection is immediately lost with only
0.0 or 0.1 minutes connection time reported.
I am
Kent West wrote:
Debian User Leonard Chatagnier wrote:
I still get the warning about can't write PAP-secrets and
Chap-secrets-Permission denied, when calling wvdial as user.
What is the Debian preferred way to do this?
Is your user a member of the dip and dialout g
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Kent West wrote:
Debian User Leonard Chatagnier wrote:
I still get the warning about can't write PAP-secrets and
Chap-secrets-Permission denied, when calling wvdial as user.
What is the Debian preferre
I have just upgraded to potato.
My hpdj500c woreked OK B/4 on slink. but now I get the message "
Waiting for lp to become ready".
I don't see anything in dmesg about the printer daemon being started.
Did I not configure this properly?
Yes, Matt, I found that out and made the change. Actually, I deleted
/etc/printcap and rebuilt it via magicfilter and it looks ok now but still
doesn't work.
Matthew Dalton wrote:
> Debian User Don Cavaiani wrote:
> >
> > I have just upgraded to potato.
> >
> &g
Le Fri, Dec 22, 2000 at 07:25:49PM +0100, John Travis écrivait :
> Thanks, that's a lot faster than my previous methods. Except the video
> (from xine) still shows up as a bright ass blue box :-). Any other
> suggestions?
you can't grab the display of xine because it use Xv extension. The disp
Le Tue, Jan 09, 2001 at 10:37:37PM -0500, Jonathan Markevich écrivait :
> I upgraded to XFree 4.0.2 last week, and it went well. However, in trying
> to install the nVidia driver, I had a conflict with Mesa... it wants to
> remove mesa as well as all of kde2! I believe it provides gl1 or somethin
Test =)
iopwhdqrch
--
Test, yep.
-- Virus Warning Message (on the network)
fiji.exe is removed from here because it contains a virus.
--- Virus Warning Message (on the network)
(B
(BFound virus WORM_BAGL
On Fri, 06 Jan 2006, Henrique de Moraes Holschuh wrote:
That may not fix it. Try setting your clock to UTC (and set UTC=yes in
/etc/default/rcS). If you can live with that, your Debian system will be
that much happier and stable, hardware clocks were meant to be always in
UTC, it's just old DO
The modem drivers install on 2.6.8-2-686 using
gcc-3.3.5 but not on 2.6.15-1-686 recently installed.
I installed gcc-4 as indicated by the dpkg
output but the error stays the same. It also appears I
have no devfs and can't start it(see output below)
even though it's in lilo.conf to mount it on
gcc-4.0 in the compile
although gcc-4.0 is installed. The post with all the details,
* *hcfpcimodem_1.08full_i386.deb Fails With SegFault Using
2.6.15-1-686And gcc-3.3.5
<http://lists.debian.org/debian-user/2006/01/msg01581.html>*
/Debian User Leonard Chatagnier/
* * &l
I'm running 2.6.15-1-686 with testing/some
experimental and getting KDE opening errors with
Openoffice(SIG 11 and sometimes 4). Using OO v1.1 but
v2.0 is available. So tried to upgrade OO to 2.0 but
Apt refused to do so.
Aptitude doesn't show anything but Wajig shows unmet
dependency for
kdelibs-
--- Star King of the Grape Trees
<[EMAIL PROTECTED]> wrote:
Leonard Chatagnier wrote:
>--- Star King of the Grape Trees
><[EMAIL PROTECTED]> wrote:
>
>
>
>>Debian User Leonard Chatagnier wrote:
>>
>>
>>
>>>I'm running 2
--- Star King of the Grape Trees
<[EMAIL PROTECTED]> wrote:
Leonard Chatagnier wrote:
>--- Star King of the Grape Trees
><[EMAIL PROTECTED]> wrote:
>
>
>
>>Debian User Leonard Chatagnier wrote:
>>
>>
>>
>>>I'm running 2
On Thursday 02 February 2006 10:05, Debian User Leonard Chatagnier
wrote:
[...]
Ok, I think I understand; the gcc-4.0 compiler is
responsible for the
difference. Must have missed the warning documentation
on this. I recently
had to revise the Linuxant Makefile for their tar.gz
driver package
Hello Debian-users,
When I run aptitude, I get the following error:
[EMAIL PROTECTED]:/home/arjen# aptitude update
Reading package lists... Error!
E: Dynamic MMap ran out of room
E: Error occurred while processing gq (NewFileVer1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package list
Hello,
I wrote earlier this week:
>>When I run aptitude, I get the following error:
>>E: Dynamic MMap ran out of room
and Maurits van Rees maurits-at-vanrees.org |Debian:news| answered:
> Have you tried Googling? This is a frequently asked question.
(Blush) No, I didn't and am deeply sorry! Mo
I was contacted by SBC(telephone service) about DSL service which I
want. While talking to
the rep, found out that their DSL service wont work on Linux OS(they say
just MSWindows and
MacIntosh OS). I find this hard to believe and am wondering if someone
in SBC's service region
is using it and
Thanks to everyone for your quick response to my question. I'll have to
get back with SBC and see if I can
talk with a tier 2 or 3 tech person and get going with DSL I didn't
reply to any specific posting as I'm not
subscribed and forgot to request copying my email address.
I've never used a N
Jacob S wrote:
On Mon, 11 Jul 2005 16:04:45 -0500
Debian User Leonard Chatagnier <[EMAIL PROTECTED]> wrote:
Thanks to everyone for your quick response to my question. I'll have
to get back with SBC and see if I can
talk with a tier 2 or 3 tech person and get going with DS
Missing devfs file in /dev prevents hcfpci~1.deb from installing without
error. Using dpkg -i hcfpci~1.deb
to install driver. Reinstalling devfsd didn't help-/dev/devfs is still
missing and dpkg -i hcf*~1.deb still gives
the same error. Appreciate any help resolving this problem. Please
copy
No response after being posted for three days. Hoping it was just
overlooked. Would appreciate any guidance whatsoever. This was posted
to Linuxant.com support with reply only that devfs and/or modprobe
configuration was causing the problem, not the modem driver. Have read
all related manua
Just finished configuring Guarddog firewall using the "Using Guarddog"
Basic Configuation Tutorial in the KDE help files. The tutorial seemed
fairly easy to use and understand so, I'm a little surprised that I was
blocked from accessing the internet. However, I'm new to Linux and have
only used
Using Sarge stable with RealPlayer 10 Gold. Can play audio/video files
with realplayer on all sites but
can't play movie trailers or clips(wmv format) on any site. Have tried
my.yahoo.com, cnn.com and movie.com
and all I get is the usual player screen with a black background and "no
picture" i
Kent West wrote:
Debian User Leonard Chatagnier wrote:
Using Sarge stable with RealPlayer 10 Gold. Can play audio/video
files with realplayer on all sites but
can't play movie trailers or clips(wmv format) on any site. Have
tried my.yahoo.com, cnn.com and movie.com
and all I get i
Nick wrote:
Debian User Leonard Chatagnier wrote:
Using Sarge stable with RealPlayer 10 Gold. Can play audio/video files
with realplayer on all sites but
can't play movie trailers or clips(wmv format) on any site.
mplayer and xine will play wmv files. mplayer has a plug-i
Nick Coleman wrote:
On Mon, 29 Aug 2005 16:48, Debian User Leonard Chatagnier wrote:
Had these installed but just noticed that the mplayerplug-in*.so
files are now missing. Still have the mplayerplug-in*.xpt files.
Reinstalled
mozilla-mplayer and got mplayerplug-in.so back in
/usr/lib
Nick Coleman wrote:
On Tue, 30 Aug 2005 14:16, Debian User Leonard Chatagnier wrote:
Well, seems I have a little problem I don't know how to handle. I
had installed Sid versions of kmplayer, mozilla-mplayer, mplayer-386
and the dependencies. Didn't like the way it worked,
Ben Alls wrote:
kde uses oss by default, try to set arts to use ALSA in the KControl
panel. go to sound options, and advanced (i think) to change the
driver to alsa rather than oss. if that doesnt work, try un-installin
alsa and adding snd-mixer-oss and snd-pcm-oss to you /etc/modules
file. i
I've just signed up for SBC Dialup and was able to get on line without
any more problems
than modifying the user ID and password entries in Pap- and
Chap-secrets. However, I'm
unable to activate my email account, [EMAIL PROTECTED] I tried the
URI, tinyurl.com/3k9ds,
that SBC said to use to act
Roberto C. Sanchez wrote:
On Thu, Sep 15, 2005 at 07:32:33AM -0500, Debian User Leonard Chatagnier wrote:
I've just signed up for SBC Dialup and was able to get on line without any more
problems
than modifying the user ID and password entries in Pap- and Chap-secrets.
However, I
Hello all ye Debian users,
Im new to Debian and this list, hope the question hasn't been answered
yet.
When trying to compile the sblive module, with my new own kernel headers
i get a 8390.ver file not found in the kernel headers.
Does anyone has a hint as to what mudules I have to select to get
Here's what a get from "Linux Kernel Insternals" :
Startup Messages :
LI : the first step of the loaderhas been able ro load the second step
whose processing then failed. This can be caused by an incorrect
geometry or by repositionning the file boot.b without reinstalling the
loader.
Also, is you
Hi all
Does anyone know where I could get the config files of the pre-compiled
kernels found in Potato ?
thx.
Hello everybody,
I have found the bounce IRC proxy in 2.3 debian.
Does anyone of you knows of security issues with this proxy ?
May I recommend it safely to my school (that has cut our irc access
lately for security reasons) ?
Thx in advance
Here's a quote from a (famous?)win program homepage:
Socks2HTTP is an agent converting SOCKS v.5 requests into HTTP requests
and tunnelling them through HTTP proxy. SOCKS allows programs to
traverse firewalls on any port number and is used by many popular
programs, like Napster, MSN Messanger, CRT
> .P.S. Mon pointeur de souris est correct sous win
et dans
> XF86Setup mais il n'apparait pas sous X11 et je ne comprend
> pas d'où cela vient et comment résoudre le probème.
> ( Il est représenté par trois ou quatre barres verticales
et
> c'est pareil avec la slack 7.0.)
Essaie de jouer avec
Hi all.
I have been using a Abit BP6 for quite a long time now, and needed the
UDMA interfaces.
I have 2 IBM 5400tr/min, 15 Gb hdd connected to ide2.
Yet, as many people did, I had an awful lot of problems setting up
UDMA on this card (autotune would freeze the box at bootup, on Linux as
well as
I'm far from being an expert, but :
1- yes you can safely install gcc v3 (and g++ v3 and so on) alongside the 2.9X
you call it only by appending -3.0 to its name.
2- I have some syntactic problems with g++ v3 as far as dereferencing
functionsis concerned. Hell, i'm really not an expert, but someth
And if we come to talk about network cards,
avoid like hell the chipset realtek 8139, especially if you have a K7/VIA based
motherboard.
avoid like hell DFE-530TX, only if you have a K7/VIA confguration.
I can tell you from experience on 3 <> computers that they either, do not run
in a useable wa
Alternatively you can slay the user as root.
log in, su, and slay jeff. (simply type slay jeff)
should do the trick if no suid apps were launched.
--
I'm an occurence of the I love GNU virus.
Please help me spread.
Most probably your bios/partition program uses LBA adressing, and linux does
not, so same number of blocks (read from the partition table, the same for
every program) but of smaller size (normal vs LBA) may accout for your
situation.
Try passing the argument hdX=lba to the kernel maybe ?
--
I'
Just noticed this new package in SID : bootcd
It should allow you to get a system similar to your desktop
on a CD.
This package actually sounds really cool.
--
I'm an occurence of the I love GNU virus.
Please help me spread.
Hell, I mean, all ne2k-pci that I had worked really well.
They were based on realtek chipsets.
BUT is your ethernet card a 100Mbps, RTL8139 one ?
That one gave me real pain.
>From what I could see on the various mailing lists regarding the subject,
I'm far from being alone in that case, and I maile
It seems almost all network packages in woody are ipv6-enabled.
I think those try to use ipv6, all the more so as you have ipv6 host
declarations in your /etc/hosts (have a look at it, commenting them out
should solve most of the log messages problems)
--
I'm an occurence of the I love GNU virus.
I have no problem at all with 4 of these cards on an old, P100, 440BX based
chipset that serves at home as DSL router. (the box has been up for 70 days
without any problem)
Yet : I had a hell of a lot of problem getting them to work on 2 friend's
computers. They had Athlon processors on VIA-base
Dear list,
I write to you as a last hope, as www.openldap.org
seems to be down from my home in France :(
Here's my problem :
When doing a massive update to a ldap server (ldap package,
sid), ie putting my /etc/group into the database, I get a
ldbm: ==> Lock table is out of available locks
error
Try to disable gpm, that could help your case.
--
I'm an occurence of the I love GNU virus.
Please help me spread.
For pppoatm to work, you dont need a package actually.
pppoatm support is in the kernel.
(the pppoe package give you pppoe support in userland,
but their is not such way of doing for pppoatm)
you need :
1) a pppoatm kernel patch. It works well on all recent kernel versions
(search google)
2) a spec
The answer seems strighforward : some of the object files and librairies
were compiled for IA64.
Of course you wont be able to get them to work on your IA32 box.
I guess, you dont have the source of this compiler, only librairies and
object files ?
--
I'm an occurence of the I love GNU virus.
Ple
Just to know, have you devfs compiled in the kernel and mounted at boot ?
are you sure the entry /dev/scd0 exists at boot-time ?
what is the error message ? (i guess it's can't mount root fs on device
XX:XX -> those numbers have a meaning you should try to interpret)
--
I'm an occurence of the I
Well, i'm sorry i'm really not an expert, but maybe you should
try a kernel with a initrd option.
With a initrd, you'll get somewhat of a prompt and the ability
to modprobe any module you like, it could help you to debug
your problem.
So, what i would do :
1) try to recompile the kernel with modul
On Wed, Oct 24, 2001 at 12:18:43PM -0500, Hanasaki JiJi wrote:
> lspci only gives the board numbers. no descriptions show up
>
OK, i think this is because you don't have PCI device name
database compiled into the kernel. Try to add it.
This is in General Setup section.
> /dev does not have my hd
for all your monitor-related configurations,
apt-get install get-edid (or is it read-edid ??)
then read-edid | parse-edid (or is it get-edid | parse-edid ??)
So you'll get what you have to put in your /etc/X11/XF86Config-4
so that X will use your monitor (and video card ! it has to be capable
of ma
601 - 700 of 719 matches
Mail list logo
