more network problems

Hello everybody earlier today Ihave posted a message about problems configuring network card. Basically the situation is that the computer does not see the network however, if someone pings my computer I see number of receive errors increase as reported by ifconfig If I try to ping other compute

network configuration problem

Hello everybody I just have installed the base system on a computer and network is not reachable While I was installing the base system the install stript started to loop on "configure network". The next step was always "configure network".. So I just was choosing the next item in the list to

Dual Serial port

Hello everybody! Most probably this is a strange question but I thought maybe some one knows the answer... As far as I understand a regular 25 pin serial port has 2 serial ports built-in on one chip. All serial lines which are needed for most communitcation devices (TxD RTS DTR RxD CTS DSR DCD RI

Kernel Oops

Hi everybody I have noticed in /var/log/kern.log the following message: ( system slink kernel 2.0.38) Sep 9 12:03:39 zoroport kernel: Serial driver version 4.13p1 with no serial opt ions enabled Sep 9 12:03:40 zoroport kernel: ttyS00 at 0x03f8 (irq = 4) is a 16450 Sep 9 12:03:40 zoroport ker

Serial Port problems

Hello everybody I have a strange (maybe not) problem with serial port (I think) I have tried to install genpower to monitor a UPS. The deamon can see the cable but I get this error after I start genpowerd: Aiee: scheduling in interrupt 001113ed this message repeats indefinitely on the consol a

Re: Voodoo Banshee ANYBODY?

Cool !! Thanks it works now!!! Needs some tuning but at least it works! Something with mouse, resolutions but that is the next step. THANK YOU VERY MUCH, Lazar On Fri, 2 Feb 2001, serge delorme wrote: > > I run potato and X-3.3.6, I don't think it'll run on X4.0 > get it at www.creative.c

Re: Voodoo Banshee ANYBODY?

at their site. > > I had the same problems as you until I tried it... > > > Le vendredi 02 fév. 2001 à 10:44:02 -0800, Lazar Fleysher a écrit: > > > > Could someone please help me to install and configure Voodoo Banshee video > > card and XWindows > > >

Re: Voodoo Banshee ANYBODY?

t; bootup? > > -Rob > > On Fri, Feb 02, 2001 at 10:44:02AM -0800, Lazar Fleysher wrote: > > > > Could someone please help me to install and configure Voodoo Banshee video > > card and XWindows > > > > I have XFree86-3.3.6 and kernel 2.2.16 installed > >

Voodoo Banshee ANYBODY?

Could someone please help me to install and configure Voodoo Banshee video card and XWindows I have XFree86-3.3.6 and kernel 2.2.16 installed It absolutely does not work on my machine and does Xwin does something strange to the video card, X even screws-up character generator (I do not know exac

HELP with Voodoo Banshee

Hi everybody Could someone please help me to install and configure Voodoo Banshee video card and XWindows I have XFree86-3.3.6 and kernel 2.2.16 installed It absolutely does not work on my machine and does Xwin does something strange to the video card, X even screws-up character generator (I do

Re: not all packages showing up with "dpkg -l"?

Maybe it is because the name of the package is foo_16a, not foo > Maciej> Let me explain: of recent, I've noticed that for certain > Maciej> (few) packages if I do "dpkg -l foo" and it produces no > Maciej> matches/output, a subsequent "apt-get install foo" *WILL* > Maciej> find

Re: WinModem

I've heard that Lucent provides modules for their Winmodems for linux. But again, "I've heard"... On Tue, 12 Dec 2000, urbanyon wrote: > i've heard the same thing, and from several reliable sources. with my > system, i bought a new modem. > > On Sun, 10 Dec 2000, Stephan Kulka wrote: > > > >

Re: BIOS local time to UT time

thanks, I knew I saw it somewhere, but could not find it when it was needed. Thanks again Lazar On Tue, 12 Dec 2000, Jens B. Jorgensen wrote: > Just edit the file > > /etc/default/rcS > > and change the line with UTC to > > UTC=yes > > Lazar Fleysher wrote: >

BIOS local time to UT time

Hi everybody, I used to have a machine running Windows and Linux, but now I decided to get rid off win. Currently, I have setup which relyes on BIOS clock set to local time. Since, I am converiting to linux only, I want to change that. I know how to set the BIOS clock to UT time :-), but which

Re: problems with netscape

> Ken writes: > > I think it sucks, too, that Netscape is the only browser you can use > > under Linux. I hope I am wrong, but there really is no alternative, is > > there? > > I've got five installed... And? "Installed" is not constructive info, sorry... does it work? how does it perform?

Re: autosetting time

I have a similar situaltion with my p75. It sets date to somethere in 2094... cool ah? what I do is boot to DOS, set correct date and use loadlin to load linux. If I boot directly to linux and correct the date, time will decrease and as I found out not all programs like that. (you mount a partiti

problems with netscape

Hello everybody I have 2 strange problems with netscape communicator 4.73 1. It renders some web pages 50 to 100 times slower than Internet exploer on win 98 on the same machine! (I have Pentium-75). I am not sure that it is configuration problem, I am afraid it is a feature of netscape. I

Turtle Beach Santa Cruz sound card

Sorry I post this for the second time because something strange was happening with my email and I am afraid I lost replies. Could people reply to this question again? Thank you very much and appologies for the "noise", Lazar Hello everybody Could someone tell me which option in kernel configura

Turtle Beach Santa Cruz sound card

Hello everybody Could someone tell me which option in kernel configuration should I choose to compile supprot for Turtle Beach Santa Cruz sound card? Thank you, Lazar

Partitioning disk

Hi Everybody, This question has been a topic of many discussions but I still do not understand the reason why people suggest to have separate partitions of /usr /usr/local/ In early days when disks were small, this was the only choise, but now, why do not just have a 1 - 2G partition for the sy

ssh X forwarding error

Hi everybody, I have a question regarding ssh configuration My home computer is behing an ip-forwarding server which does not have xwindows installed. When I login to my home computer through the server, I get the following error: Warning: Remote host denied X11 forwarding, perhaps xauth program

Re: tuning scsi performance?

Is it possible that simply either capture or output (or both) buffers are too small? > what are you using to capture video? i had major frame droppings on > 7200RPM ultra 2 scsi with dual celeron 466 and 256MB of ram .. using BT848 > ..the drivers just aren't good enough for high fps capture(more

Re: Problems setting DMA

I have a similar problem. Maybe even worse.. If I change the way the hard drives are connected (like swap hda and hdb), changin the master/slave jumpers, the system does not boot at all... I had to find, what it seems a unique configuration in which it boots, but no DMA on the second IDE channel. I

Re: Monitor power-down/screensaver

xset ... xset Could someone tell me what is wrong with setting BlankTime xx SuspendTimeyy OffTimezz in XF86Config

XF86Config

Hi everyone, I have a video card with small amount of memory and I was wondering if it is possible to configure the xserver to change color depth when I change resolution by pressing <+/->. Right now, when I switch, the colordepth says the same. In particular, I am interested in getting to highe

compiling ftape problem

Hi I have a problem compiling ftape-4.04a I think I made correct modifications to MCONFIG, but I get this: zftape-rw.c: In function `zft_set_flags': zftape-rw.c:76: `ZFT_Q80_MODE' undeclared (first use in this function) zftape-rw.c:76: (Each undeclared identifier is reported only once zftape-rw

Re: ppp redial

> how to set the ppp to redial when losting connection? in /etc/ppp/peers edit the file with the provider information (default is provider) and add persist maxfail N N is the number of attepmts to conenct before ppp gives up, set to 0 for never give-up. I've never used maxfail, so can not comm

whereis ftape-module??

Hi In 2.0 there used to be a package called ftape-module with the kernel patch for ftape (the one included into the kernel source is very old). As it turned out, 2.2 kernel also was an old driver. I can get the patch from the ftape web page, I just curious, why it did not make in to the stable t

Re: System.map problem

On 17 Oct 2000, Moritz Schulte wrote: > > after upgrade to 2.2.17 (from 2.0.36) I have noticed that when I give the > > ps command I get the following error: > > > > {aic7xxx_patch6_func} {rpc_debug} > > Warning: /boot/System.map-2.2.17 does not match kernel data. > > Warning: /usr/src/linux/Syst

System.map problem

Hi everybody, after upgrade to 2.2.17 (from 2.0.36) I have noticed that when I give the ps command I get the following error: {aic7xxx_patch6_func} {rpc_debug} Warning: /boot/System.map-2.2.17 does not match kernel data. Warning: /usr/src/linux/System.map has an incorrect kernel version. after t

Re: compiling kernel

The online help does not answer on that question... On Mon, 16 Oct 2000, [EMAIL PROTECTED] wrote: > use make menuconfig, it has a lot of online help and explains all of those > options. > > nate > > On Mon, 16 Oct 2000, Lazar Fleysher wrote: > > fleysh >Hi everyone

compiling kernel

Hi everyone! I am trying to compile 2.217 kernel and I am offered to choose the CPU family. Could someone, however, explain the difference between -- "586" for generic Pentium CPUs, possibly lacking the TSC and -- "Pentium" for the Intel Pentium/Pentium MMX, AMD K5, K6 and K6-3D and how to che

fvwm95

Hello everybody, I have a question regarding the fvwm95 configuration. After I upgraded to 2.2, the little clock dissapeared from the lower right hand conner of the task bar. Could someone tell me how to get it back? thank you Lazar

Re: keyboardless operation

2 Sep 2000, Philip C Mendelsohn wrote: > Is this an AT style keyboard? I found that some if not all older AT > keyboards need to be present for the system to complete the BIOS boot seq. > > Hope that helps. > Phil Mendelsohn > > On Fri, 1 Sep 2000, Lazar Fleysher wrote: > &

Re: keyboardless operation

e to enable systems withouyt keyboards to boot..probably a kernel > workaround for what the bios should handle on it's own(and does handle > on the vast majority of boards made in the past 5 years) > > nate > > Lazar Fleysher wrote: > > > > HI > > > > I

keyboardless operation

HI I would like to operate a machine without a keyboard (in server mode) The keyboard is disabled in bios, but the system does not boot without it. Should I compile the kernel in a special way? Thank you Lazar Take these b

RealTek NIC card problem

Hello everybody, I have a machine running 2.0.36 kernel and a RealTek 8139B card installed. When I sit at the consol, everything is fine, however, if I connect to the machine via, say ssh, and run netscape, the network card stops responding and on the consol I see the message: eth0: Transmit time

PCL 5 and Magicfilter

Hi Everybody, I have a Winprinter :( and it can simulate PCL5 with 600dpi resolution. The printer is connected to a win machine and I use samba to print to it. The question is which device should I use for magic filter configuration? Currently, I have set up the filter to use laserjet (which is, I

Re: compiling pine [solved]

to > dselect. > > On Tue, 10 Aug 1999, Lazar Fleysher wrote: > > > I do not use dselect, I use dpkg directly, because I could never > > understand how to tame dselect and dselect knows no more than > > package.gz for corresponding tree.. There is nothing in the pa

Re: compiling pine

the patch program. There's a deb for it listed in dselect. > > On Tue, 10 Aug 1999, Lazar Fleysher wrote: > > > > Where do I get the patch from? > > > > And pine4.10 does not draw my signature right... there is a bug in it from > > my point of view :) >

Re: compiling pine

Where do I get the patch from? And pine4.10 does not draw my signature right... there is a bug in it from my point of view :) On Tue, 10 Aug 1999, Ben Collins wrote: > On Tue, Aug 10, 1999 at 09:58:56AM -0700, Lazar Fleysher wrote: > > Hi Everyone, > > > > I am e

compiling pine

Hi Everyone, I am experiencing a problem compiling pine/pico and I do not know how to handle it. I have installed pine396-diffs_2.deb and pine396-src_2.deb from the stable and this is what I get: # dpkg-source -x pine_3.96M-2.dsc dpkg-source: extracting pine in pine-3.96M dpkg-source: failure: e

Distributed computing

Hi everyone, Could some one point me to resources available on distributed computing. What it is, how it works and who to make it work under linux, etc... Thank you, ZORO Take these broken wings and learn to fly...

Re: [LINUX] VPN software?

Hi Take a look at: http://www.inka.de/~bigred/devel/cipe.html Remember that Linux does not support the Diffie-Hellman key exchange yet. ZORO On Mon, 14 Jun 1999, Nico De Ranter wrote: > > Howdy, > > I'm looking for a VPN solution that would preferably be free :-) > and has a server for Li

Re: Boot error

On Sat, 12 Jun 1999, Kevin A. Foss wrote: > On Thu, Jun 10, 1999 at 07:55:58AM -0700, Lazar Fleysher wrote: > > Hi everyone, > > > > I have noticed that sometimes I get this boot error: > > mktime() failed unexpectedly (rc -1). Aborting. > > Could someone

Re: kernel "append" options

> Lazar Fleysher <[EMAIL PROTECTED]> wrote: > > > HI all, > > > > > > Could some one tell me how to find if a given kernel release supports > > > certain append option. In particular, I am interested in > > > 2.0.36 supports ide-scsi option.

kernel "append" options

HI all, Could some one tell me how to find if a given kernel release supports certain append option. In particular, I am interested in 2.0.36 supports ide-scsi option. I want to do: append="hdc=ide-scsi" I have tried it with no results, I do not know if kernel does not support it or I did someth

Re: ftp ssh tunelling

Dear Christian, ssh supports something called "secure copy". The command is scp and it comes together with ssh. It is a pain to use it, but this is the only thing I can think of. Maybe, however, you want "virtual private network". If you install this on both sides, all your regular tcp-applicatio

Boot error

Hi everyone, I have noticed that sometimes I get this boot error: mktime() failed unexpectedly (rc -1). Aborting. Could someone tell what and how dengerous it is? Thanks ZORO Take these broken wings and learn to fly...

Re: cat'ing a binary does some really funky things with my display

> Every once in a while, I will mistakenly 'cat' a binary. This almost always > results in my console going haywire. Now most text appears as graphic > characters (blocks, arrows, lines - all that extended ascii stuff). I have > no idea, short of a re-boot, how to recover my console. Any idea

Re: Installing from disk

hi There is tar.exe tar for dos. You can create a multi volume tar archive with tar for dos and then untar it on your linux machine. I do not remember where I got tar.exe from though... Maybe there is such a thing as gnu-tar for dos... It is not much, but maybe it helps... ZORO On Mon

ATAPI/SCSI CD-ROM

Hi Everybody, I just have learned that ATAPI is SCSI on IDE bus, so I thought that I would recompile the kernel to support IDE-SCSI emulation. I did... but only one of my two cdroms is detected during boot process. Telling hdc=ide-scsi in loadlin did not help... I use linux 2.0.34 and at this poin

IRQ and PS/2

Hi Everybody, Thank you for all your replys, however, I think that I did not describe the situation correctly. I have an older type pentium with AT-style board ( i think it is called that way, it has one 5-pin keyboard connector). I do not recall seeing anything in BIOS related to PS/2 bus (I wil

IRQ and PS/2

Hi everybody, I have run out of IRQs. Well, actually I have one left (IRQ12), but it is reserved for PS/2 bus. I do not have a manual for my motherboard, so I do not know how to disable the ps/2 bus. I have a regular serial mouse and AT-type (5-pin) keyboard. The motherboard also has somethi

DLT Libraries for Linux

Hi Everyone, I was just wondering if someone had writen a package to control a DLT library. As fas as I understand, it does not matter which type of media it changes. A package to control a jukebox... If someone could point me to something like that, I would highly appreciate it. Thank you, ZORO

CD-sound problem

Hi Everyone, I have recompiled the kernel to support sound and all sound applications, which I tryed (midi-, wav-, au- players, xmix), work except CD. No sound at all. I aslo have noticed that if I boot win95 and then linux without powering off the computer, the xmix does not work, but CD works.

Re: talk problems

On Thu, 7 Jan 1999, Alexander Kushnirenko wrote: > Hi, Zoro! > > I'm not sure, but you may want to check: > > 1. Do you have lines in /etc/inetd.conf like: > talkdgram udp waitnobody.tty /usr/sbin/tcpd > /usr/sbin/in.talkd > ntalk dgram udp waitno

talk problems

Hi everyone, I just noticed that talk does not work and gives the following error Couldn't bind to control socket : Cannot assign requested address (99). Any ideas what happened and how to fix it? Thanks in advance, ZORO

Socket programming

HI Everyone, This is not a debian-specific question, but have no-one else to ask. I have been playing with sockets and can not seem to figure out how to use select() system call. I am trying to monitor wether a socket is ready for read and write. Read-monitor works ok, but wrtie --not. When the ot

lint

Hi Everyone, Could someone tell me if lint for linux exists and where it is? Or an equivalent to check C code. Thank you ZORO Take these broken wings and learn to fly... ///|\\\ 0 0 ( . )

ISP

HI Could some one tell me how to set up an ISP on Linux. I remember seeing a howto on the subject, but can not seem to find it. How to apply for IPaddresses? Thank you ZORO Take these broken wings and learn to fly...

Re: /etc/ppp/ip-up not being run

After upgrade bo->hamm had a similar problem run-parts in ip-up is not executed, but if I add everything to the ip-up directly it works. Did not have to find what went wrong and gave up Not a very constructive e-mail :-) ZORO On Tue, 3 Nov 1998, Noah L. Meyerhans wrote: > -BEGIN

Closed end of a pipe

Hello evebody, I have a general C/Unix question. Is it possible for a writer to find out the state (opened/closed) of the other end of a pipe without writting to the pipe? Take these broken wings and learn to fly...

Re: PINE problems

On 24 Oct 1998, W. Paul Mills wrote: > > Lazar Fleysher <[EMAIL PROTECTED]> writes: > > > Hi > > > > I use dail-up connection to the internet. I have noticed that while I am > > off line I can not send mails from pine. It generates an error and does &g

PINE problems

Hi I use dail-up connection to the internet. I have noticed that while I am off line I can not send mails from pine. It generates an error and does not spool the mail. When I am on line everything works fine. Any ideas why? Thanks ZORO

RE: STRANGE ERROR

kernel 2.0.34 Thanks On Wed, 21 Oct 1998, Shaleh wrote: > Guessing, but it sounds like a kernel bug. You neglected to mention what > kernel you have. > > > On 22-Oct-98 Lazar Fleysher wrote: > > Hi Everybody > > > > Today, I have discovered a str

STRANGE ERROR

Hi Everybody Today, I have discovered a strange warning in /var/log/messages: Oct 21 18:01:28 gemini kernel: Warning: dev (04:02) tty->count(2) != #fd's(3) in tty_open Oct 21 18:01:28 gemini kernel: Warning: dev (04:02) tty->count(2) != #fd's(3) in release_dev Oct 21 18:01:28 gemini kernel: Warni

Re: config printer.

If you think that everything is set up correctly (sd if lp pw...) then you can try to change the order of the line in /etc/printcap. Eventhough, the man page state that the order does not matter, in practice it DOES! Hope it helps... ZORO On Thu, 15 Oct 1998, Zheng Wang wrote: > Hi > I have

ManPages Secton 2

Hello everyone, It seems that I do not have section 2 installed. Should it be installed separately(how?) from all "main" manpages or what had happend? Thank you, ZORO Take these broken wings and learn to fly... ///

Re: PPP & ibm.net

I used to have ibm.net as my ISP use pppconfig to cofigure the system It will do everythin. Remember that eventhough your email is lanceh most probably your username is internet.usinet.lanceh or something crazy like this... In general, ibm.net has all the scripts on their home page, but

Re: Quick Question

There are two things I would like to add.(Hope you find it interesting) 1. When I installed xringd, it could not find the modem and -m option did not work.So I recompiled xringd and explicitly defined modem device as /dev/ttyS1 2. When you start pon it resets the modem and after you do poff, xri

bo->hamm upgrade

Hello everyone, I need an advice on how to do it. The situation is the following: I have bo system installed and I have changed ISP and can not seem to configure ppp to conect to it. I can do it from a different machine and transfer files using floppies (sorry no network...) Could someone tell m

ppp in bo

Hi everyone, I did not use my system for a while and now would like to upgrade it to hamm. During this time I have changed my ISP. My current ISP uses CHAP and I have created chap-secrets file username * password Changed everything in ppp.chatscript and ppp.options_out However, I can not get

Re: XRINGD AGAIN

Hi I have only one line in my xringd.conf R 10-15 R 30 : /usr/bin/pon If I add -m /dev/ttyS1 the xringd starts to complain that the file does not exist By default it should use /dev/modem so I've made dev/ modem point to /dev/ttyS1 but it does not help either... Oh and yes, please send me

XRINGD AGAIN

Just curious if anyone had succeded in configuring and using xringd. It does not work on my machine I have an external modem on /dev/ttyS1 and even when I tell #xringd -m /dev/ttyS1 it can not find it . tryed to make /dev/modem as sim-link to /dev/ttyS1 but it does not help What els

Re: PON on REQUEST

Thanks for your reply. I do have a script which updates the ip address of my machine and posts it on a web page. I have installed xringd package and it would be a cool thing, but it can not find the modem. It keeps complaning that /dev/ttyS1 does nor exist... I know it exists and ppp works fine.

xringd problem

Hi Everyone, I just installed xringd. It must be a cool thing, but it can not find the modem #xringd -m /dev/ttyS1 xringd: error opening modem device No such file or directory How can I fix it? Thank you ZORO

PON on REQUEST

Greeting everyone, Very often, I have to work on my home computer from other places and I do not want to have my home computer on-line all the time. Would it be possible to configure it in such a way so when I call home say two times in a row, pon would be executed automaticaly and ip-up ( I did

Re: Commandline FTP

What about $ ftp -n hostname < script.name & > /dev/null and the script.name is just: user username password put local.file remote.file quit Would it solve your problem? ZORO

user-cgi

Hi Could someone help me to configure the apache web server to allow users ( selected users) create their own cgi scripts. I want to play with cgi scripts and do not what to be loged-in as a root. Thank you ZORO

Re: Can't boot past the Takaya

Hi Bill, I had the same problem with Takaya 16x CDROM. I do not know if it a problem with the device, but the problem was and is that hdb is detected twice and hdc is not detected at all. So, I connected the CDROM to the secondary IDE channel and left it as slave. It works. Hope this helps, Z

GPIB-ENET

Hi EVeryone, I was just wondering if someone ever wrote a c-library for a General Purpouse Interface Bus(GPIB) controller with ethernet interface? Any pointers are highly appreciated ZORO

Re: More CDROM troubles

Hi George, I had the same problem. In my case I have noticed that the slave device on the primary channel was detectes twice duriong boot-up. So I connected the cd-rom to the secondary channel and everything works fine. You can check with dmesg what it probes. Again, in my case it was and STILL IS

monitor stand-by mode

Hello everyone, Could someone tell me how to tell Linux to switch the monitor in stand-by/power-off mode after some idle period? Thank you ZORO

Sound devices

Hello everyone, All sound devices are accessible to root onle, could someone tell me how to make them useble by all users? Thank you ZORO

Re:[fixed]New installation problem

: probing STATUS instead of ALLSTATUS hdb: probing STATUS instead of ALLSTATUS hdd: DF7910C(-D0161 ), ATAPI CDROM drive I do not feel qualified to judge whether it is right or wrong, but it looks strange. With best wishes, Lazar On 22 Aug 1998, Ole J. Tetlie wrote: > *-Lazar Fleysher <

Re: New installation problem

22 Aug 1998, Ole J. Tetlie wrote: > *-Lazar Fleysher <[EMAIL PROTECTED]> > | > | Thank you for your reply, but I think I have to make some clarifications: > | > | I do not have a Debian CD, I downloaded the base system from the net, and > | install everything from hard di

Re: New installation problem

it is not enough?). More input is appreciated Lazar On Sat, 22 Aug 1998, Pann McCuaig wrote: > On Sat, Aug 22, 1998 at 02:39:16PM -0700, Lazar Fleysher wrote: > > Hello everyone, > > > > I just downloaded hamm distribution and when I try to install it, the > > system

New installation problem

Hello everyone, I just downloaded hamm distribution and when I try to install it, the system lock after detecting IDE CD-ROM. (If I disconnect the CD it works fine, but then again, I can not boot with CD connected. Any ideas of how to overcome the problem? Thank you, Lazar

Re: pon - When am I connected?

Maybe it is not the best way, but I have the following command in my ip-up script. wall PPP is UP ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Iomega parallel Ditto 2G

Is Iomega Ditto 2G parallel tape drive supported by Linux (ftape)? Thank you ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

File-system on tape

Hi, Is it possible to create a file system on a tape drive ( like on mainframes) and use it as a disk? I know it is very slow, but is it possible? If not, is it possible to have several files on one tape and how to access them? Any input is appreciated. Thank you all ZORO -- To UNSUBSCRIBE,

TEX mailing list

Hi Could someone tell me the tex mailing list, please, ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

ADSL?

Coudl someone tell me what ADSL is? Thank you ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

sudo and super

HI Could someone explain to me the difference between the sudo and super packages. From the description in Packages file they serve the same purpose. Thank you ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Re: Terminal Corruption

You also may try Ctrl-v Ctrl-o and hit enter... On Sat, 2 May 1998 [EMAIL PROTECTED] wrote: > Any idea why / how to prevent the text on Virtual Consoles going nuts and > being > replaced with lots of funny garbage characters? > > This happens to me occasionally if I accidentally cat an executa

Re: [OFF TOPIC] Connecting Win95 to Linux(server/gateway)

On Thu, 9 Apr 1998, Stephen A. Witt wrote: > On Thu, 9 Apr 1998 [EMAIL PROTECTED] wrote: ... > > > > I would like to network the two so that the new Win95 machine uses the > > Linux box as a gateway to the internet and as a server. I will > > probably try to use PLIP as the protoco

Re:[solved] lpr and banner page

On Fri, 27 Mar 1998, pgarcia wrote: > > IN printcap file I have :sh: so the banner page should not be printed. > > On the other hand, when I try to print it prints some garbage on 1.5 page > > and after that it prints the sent file. The garbage looks like a banner > > page since it has user name

lpr and banner page

Hello everybody, I have the following question: IN printcap file I have :sh: so the banner page should not be printed. On the other hand, when I try to print it prints some garbage on 1.5 page and after that it prints the sent file. The garbage looks like a banner page since it has user name, ma

Ring 0 and DosEmu

Hello everybody, I saw the discussion on Win and DosEmu, and somebody mentioned something about "ring 0". Could someone tell more what it means. Just for general education... Thank you, ZORO -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL

  1   2   >