On 09.06.2015 00:03, Debian Bug Tracking System wrote:
The kernel has been upgraded and you need to reboot to complete the
upgrade.
Ben.
Hi Ben
I saw this while opening the bug, but as this system was
rebooted several times after the upgrade, I assummed this
was done.
I rebooted once more bu
Package: gksu
Version: 2.0.2-9
Severity: normal
Hello,
After using gksu and entering the root password once the password is no more
asked, even several days later.
Frédéric
-- System Information:
Debian Release: 8.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'pr
Hi James,
On Mon, Jun 8, 2015 at 5:51 PM, James Lu wrote:
> Hi Vincent,
>
> I've removed bzr from the build dependencies.
>
> After fiddling with the get-orig-source a bit, I realized that I can't get
> the same checksum either when running it multiple times. According to a
> 'diff' of 'tar -tvf'
Jonas Jochmaring writes:
> On Fri, 05 Jun 2015 11:49:55 +0200 Jonas Jochmaring
> wrote:
>> I've created a small patch for bcfg2 1.3.5 which fixes compatibility
>> with django 1.7. I've already submitted a pull request upstream
>> (https://github.com/Bcfg2/bcfg2/pull/281).
>> With the upgrade to
Package: sbcl
Version: 2:1.2.12-1
Followup-For: Bug #787909
It is suggested to remove cl-asdf, but that takes cl-swank
common-lisp-controller with it. And those are required by slime.
-- System Information:
Debian Release: stretch/sid
APT prefers testing-updates
APT policy: (500, 'testing-u
Try adding
append=“ nomodeset"
to the end of the main stanza in /etc/yaboot.conf. Then (as root) execute
“ybin” to propagate the change to the bootstrap routines.
This will set the kernel command line to inhibit the kernel from trying to use
hardware acceleration for your video.
The resul
Helge Deller :
> On 08.06.2015 16:07, wrote:
>>
>> Anyway, since I have an installed working Debian 8 sid on this
>> machine, should I gzip the kernel and try to boot it to see whether
>> this issue occurs in non-netboot case too?
>
>
> Yes, please.
> And send the dmesg log of the sucessful boo
more bits of info found online:
http://steamcommunity.com/app/238050/discussions/0/616188677683502209/?insideModal=1
"Did Blake Stone ever get patched?
I know a while ago there was talk on updating the bundled
versions of Blake Stone with the official patches but I can't find any more
info
Am 08.06.2015 um 09:29 schrieb David Englund/Hedlund:
> Carsten Schoenert said: "But I agree that we can change the
> Recommends in a Suggests so it not getting installed by the default
> setup of Debian as it happen now for packages marked as Recommends."
>
> Is this not going to happen now or wh
Package: src:jsmpp
Version: 2.1.2-1
Severity: serious
Justification: fails to build from source
Dear Maintainer,
jsmpp fails to build from source in a clean, unstable pbuilder on amd64. Here
is the relevant tail of the log [1]:
[INFO] Scanning for projects...
[INFO]
Control: tags -1 patch
Hi all,
Am Montag, den 08.06.2015, 11:45 +0200 schrieb Fabian Greffrath:
> So, in absence of a better approach, [...]
I think I have found another, maybe even the final, fix for this issue.
Remember that the operands in SSE functions must be aligned on 16-byte
boundaries.
Dear Debian maintainer,
On Thursday, May 21, 2015, I notified you of the beginning of a review process
concerning debconf templates for cobbler.
The debian-l10n-english contributors have now reviewed these templates,
and the final proposed changes are attached to this update to the
original bug r
Found this:
http://www.classicdosgames.com/game/Blake_Stone:_Aliens_of_Gold.html
So there are 4 versions: 1.0, 2.0, 2.1, 2.1., 3.0;
with 3.0 being the one currenlty on GOG & Steam.
Patches:
Blake Stone: Aliens of Gold Registered v2.1 to v3.0 Episodes 1-6 patch
(797,606 bytes) 31 Januar
Package: udev
Version: 219-10
Followup-For: Bug #787364
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
udev versions from 219-10 and later do not automatically run ifup on my amd64
machine but do run fine on my
Was reinstalling over a debian 7 install..
Regards,
Luc
On Mon, Jun 08, 2015 at 05:32:05PM -0700, Sean M wrote:
> Debian-Installer syslog from the broken version:
>
> Jun 8 21:34:25 kernel: [ 78.080247] scsi0 : hpsa
> Jun 8 21:34:25 kernel: [ 78.081628] hpsa :03:00.0: RAID device
> c0b3t0l0 added.
> Jun 8 21:34:25 kernel: [ 78.081793] scs
Package:ca-certificates
Version:20150426
Debian: Testing
Hello maintainer,
after the update of the ca-certificates package there is no connection
to pop3.arcor.de possible. Please see the logs.
Thanks and greets klak
fetchmail_error.txt.gz
Descrip
Package: cutecom
Version: 0.22.0-2
Severity: normal
Dear Maintainer,
on running cutecom I am not offered a list of valid serial ports, nor
any way to chose them only /dev/ttyS[0-3]
I can't use /dev/ttyS4 I can't use /dev/ttyUSB0 etc...
-- System Information:
Debian Release: 8.0
APT prefers s
On Tue, Jun 09, 2015 at 02:09:35AM +0200, Guillem Jover wrote:
> Control: tags -1 unreproducible moreinfo
>
> On Mon, 2015-06-08 at 14:00:28 -0500, Adam Majer wrote:
> > Package: dpkg-dev
> > Version: 1.18.1
> > Severity: normal
>
> > When unpacking in /tmp, which is a tmpfs,
> >
> > $ dpkg-sour
Thanks. Please feel free to follow-up in the upstream bug report:
https://github.com/QuiteRSS/quiterss/issues/768#issuecomment-109355176
It was suggested to try disabling option "Enable Java Script"...
--
Regards,
Dmitry Smirnov.
---
Do your duty as you see it, and damn the consequences.
On Tue, Mar 10, 2015 at 09:07:52AM +0100, Julien Puydt wrote:
> Package: gmp
> Version: 2:6.0.0+dfsg-6
>
> Hi,
>
> the sagemath software is using MPIR, but we're trying to package it for
> debian using the default lib for multi-precision arithmetic : GMP.
>
> Sagemath uses mp_set_memory_function
Package: policykit-1
Version: 0.112-5
Severity: important
Dear Maintainer,
Was trying to install the new version from experimental. Hit these
problems while installing, have attached the file as well :-
D01: checking dependencies for remove 'libpolkit-backend-1-0:amd64'
dpkg: libpolkit-backen
On Sat 2015-06-06 09:17:21 -0400, nfb wrote:
> stdbuf -oL gpg --use-agent --sign
>
> works without errors retrieving the cached password from gpg-agent.
> I'd say the problem is not directly gpg-agent then...
>
> Anyways executing the command above, i noticed it asked me the
> passphrase via pine
Hi all,
Have been hit by the same permissions error in udisks2 as Pier Paolo
@Pier Paolo I tried your patch but didn't work. I still get the 'Not
authorized to perform operation' error as seen by you as well. Have
attached a picture to confirm the same.
My /etc/fstab looks like the following :-
Control: tag -1 confirmed upstream
On Mon, Jun 08, 2015 at 08:28:00AM +0200, Ph. Marek wrote:
> Given the file
>
>-rw-r--r-- 1 . . 327680 Feb 16 15:09 2015-02-16-raspbian-wheezy.img
>
> when looking at the directory in vim (via netrw) it gets displayed as
>
> 2015-02-16-raspbian-wh
Package: gnome-terminal
Version: 3.14.1-1
Severity: normal
When run in Cinnamon in Debian 8, the terminal will stall after a while.
If the terminal is running an idle SSH connection, the connection will
become unusable. If the terminal is running some process, the output
of the process will end b
On Sun, 07 Jun 2015 20:50:55 +0200 Lee Garrett wrote:
> Hi Ben,
>
> a more complete blacklisting is in commit 484cdf4c0, that made it into
4.0.5.
> Apparently the other Samsung SSDs are affected, too.
>
> I can confirm that this patch fixes the issues I'm having with my 840 Evo.
>
> Greetings,
> L
In-line :-
On 6/8/15, Rogério Brito wrote:
> Hi.
Hi Rogério,
> I guess that you meant udisks2, right? If that's your situation, I guess
> that you can safely remove usbmount and use only udisks2.
>
> In fact, I don't think that usbmount is useful anymore with udisks2 and
> other things. Espec
After further investigation, this appears to be upstream bug
https://bugs.freedesktop.org/show_bug.cgi?id=80553, which was fixed in
http://cgit.freedesktop.org/plymouth/commit/?id=84eb4381db85877a9a56b35994e6
c10d43e46ebe, which in turn is part of upstream Plymouth 0.9.2.
I have confirmed that "ap
On Monday 08 June 2015 19:01:18 Laurent Bigonville wrote:
[snip]
> Hi,
>
> I would like to remove geoclue from the archive and
> qtlocation is the only remaning non leaf package to use it.
>
> The package should switch to geoclue 2 instead, not sure how far
> upstream is regarding this.
Hi Laure
It should perhaps further be noted that zeitgeist seems no longer be
developer or maybe even dead upstream,... the last entries on their
mailing lists are from 2013, and upstream states in several locations
that there's "no further active development".
Cheers,
Chris.
smime.p7s
Description: S/MI
Dependency update: memtailor has been accepted into Debian unstable.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: diodon
Version: 1.3.0-1
Severity: wishlist
Hey.
Since 1.3 the package depends on zeitgeist-core...
Is this really necessary?
It seem a bit like software bloat if I need a all-the-time
running daemon with extensive logging stuff... also it's a GNOME3
project which many people from other
package: release-notes
severity: wishlist
kfreebsd's release notes say to boot with rescue/enable=true, but it
isn't clear how to do that.
The kfreebsd FAQ is clearer, adding "set kFreeBSD.rescue/enable=true"
to the grub boot commands will do the trick.
Best wishes,
Mike
--
To UNSUBSCRIBE, em
package: src:kfreebsd-10
version: 10.1~svn274115-4
severity: wishlist
It would be nice if the kfreebsd installer were to include a rescue
mode grub boot option.
In the meantime manually adding "set kFreeBSD.rescue/enable=true"
according to the kfreebsd FAQ is possible:
https://wiki.debian.org/Deb
package: rescue-mode
version: 1.51
severity: important
x-debbugs-cc: debian-...@lists.debian.org
Adding the line "set kFreeBSD.rescue/enable=true" in a grub entry and
booting the kfreebsd installer fails when executing rescue-mode. The
error is:
mkdir: can't create directory '/dev/md': Operation
Package: release.debian.org,qa.debian.org
Severity: normal
User: release.debian@packages.debian.org
Usertag: tools
User: qa.debian@packages.debian.org
Usertags: udd
Hi,
It looks like packages affected by bugs tagged sid and stretch are not
considered for autoremoval.
E.g,
- php-auth-http
Hi Vincent,
I've removed bzr from the build dependencies.
After fiddling with the get-orig-source a bit, I realized that I can't
get the same checksum either when running it multiple times. According
to a 'diff' of 'tar -tvf' output, the only difference between these
generated tarballs was th
More information from the working version:
PCI ID: vendor: 103c ("*Hewlett-Packard Company*"), device: 3239 ("*Smart
Array Gen9 Controllers*"), subvendor: 103c, subdevice: 21c0 ("*P440ar*")
Kernel Module: HP HPSA Driver (v 3.4.4-1)
Debian-Installer syslog from the broken version:
Jun 8 21:34:25
Control: tags -1 unreproducible moreinfo
On Mon, 2015-06-08 at 14:00:28 -0500, Adam Majer wrote:
> Package: dpkg-dev
> Version: 1.18.1
> Severity: normal
> When unpacking in /tmp, which is a tmpfs,
>
> $ dpkg-source -x ipsec-tools_0.8.2+20140711-3.dsc
> dpkg-source: info: extracting ipsec-tools
Package: libvirt-daemon
Version: 1.2.9-9
Severity: important
Dear Maintainer, I can confirm that the archived bug #773503 is not fixed.
libvirtd still segfaults on live migration.
Last message in #773503 may give some clue.
Thank you!
-- System Information:
Debian Release: 8.0
APT prefers stab
On Mon, 8 Jun 2015 06:28:04 Salvatore Bonaccorso wrote:
> Hi Dimitry,
>
> On Mon, Jun 08, 2015 at 11:36:38AM +1000, Dmitry Smirnov wrote:
> > On Sun, 7 Jun 2015 20:17:43 Salvatore Bonaccorso wrote:
> > > Should the libzabbix-api-perl package possibly be dropped from Debian
> > > for stretch? (thus
Package: syslog-ng
Version: 3.3.5-4
Severity: normal
This particular feature is a main contributing factor why syslog-ng was
supported in design, but this doesn't seem to work in the edition
released in debian.
output:
syslog-ng --syntax-only
Error parsing afsocket, syntax error, unexpected K
The only part of the patch I don't like is the hard-coding of the timestamp.
I don't have a better idea, but before I apply this I'm going to see if
upstream has any suggestions. I'll include in that bug report the other two
fixes which look good.
pgpypITBp1bsR.pgp
Description: OpenPGP digital s
Package: ooo-thumbnailer
Version: 0.2-5
Followup-For: Bug #659321
Dear Maintainer,
I can confirm the bug is still open
and the solution proposed is working for me
-- System Information:
Debian Release: 8.1
APT prefers stable
APT policy: (700, 'stable'), (500, 'stable-updates'), (500,
'propo
Package: gnome-xcf-thumbnailer
Version: 1.0-1.1
Followup-For: Bug #655465
Dear Maintainer,
I confirm that the bug is still open
a possible fix working for me is creating
/usr/share/thumbnailers/gnome-xcf.thumbnailer
with this inside
[Thumbnailer Entry]
TryExec=gnome-xcf-thumbnailer
Exec=gnome-x
Package: src:beets
Followup-For: Bug #788112
Dear Maintainer,
-pkg beets has no manpage when installed via python-pip
-posted June 08 2015 at
https://github.com/sampsyo/beets/issues/1501#issuecomment-110141520
"
> sampsyo commented 2 hours ago
>Yes, this is sad. But alas, it is not fixable (
Control: tag -1 moreinfo
stop
On Mon, Jun 08, 2015 at 11:03:03PM +, Debian Bug Tracking System wrote:
> Processing control commands:
>
> > -1 moreinfo
> Unknown command or malformed arguments to command.
>
Groeten
Geert Stappers
--
Leven en laten leven
--
To UNSUBSCRIBE, email to debian
Package: libustr-dev,libustr-1.0-1-dbg
Version: 1.0.4-4
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
a test with piuparts revealed that your package misses the copyright
file after an upgrade, which is a violation of Policy 12.5:
https://www.debian.org/doc/debian-poli
Package: python-greenlet-doc
Version: 0.4.7-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
a test with piuparts revealed that your package misses the copyright
file after an upgrade, which is a violation of Policy 12.5:
https://www.debian.org/doc/debian-policy/ch-docs
Package: libqb-dev
Version: 0.17.1-3
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
a test with piuparts revealed that your package misses the copyright
file after an upgrade, which is a violation of Policy 12.5:
https://www.debian.org/doc/debian-policy/ch-docs.html#s-c
Package: golang-mode
Version: 3:1.3.0-1
Severity: normal
Byte-compilation of golang-mode for xemacs21 fails:
While compiling toplevel forms in file
/usr/share/xemacs21/site-lisp/golang-mode/go-mode.el:
!! File error (("Cannot open load file" "find-file"))
>>Error occurred processing go-m
Package: bind9utils
Version: 1:9.9.5.dfsg-9
Severity: normal
Dear Maintainer,
The manual for dnssec-settime states:
If none of these options is set on the command line, then dnssec-settime
simply prints the key timing metadata already stored in the key.
But it doesn't do anything of the
Package: libthai-dev
Version: 0.1.22-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
a test with piuparts revealed that your package misses the copyright
file after an upgrade, which is a violation of Policy 12.5:
https://www.debian.org/doc/debian-policy/ch-docs.html#s
Package: libdatrie-dev
Version: 0.2.9-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
a test with piuparts revealed that your package misses the copyright
file after an upgrade, which is a violation of Policy 12.5:
https://www.debian.org/doc/debian-policy/ch-docs.html#
control: -1 moreinfo
On Mon, Jun 08, 2015 at 03:23:00PM -0700, Sean Mottles wrote:
} an HP DL360 Gen9 server, Smart Array P440ar Controller,Version 2.14
Please provide more information.
Such as:
* PCI ID
* name of kernel module, a special the name of the kernel module with the
working version
Package: fish-dbg
Version: 2.1.2+dfsg1-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
an upgrade test with piuparts revealed that your package installs files
over existing symlinks and possibly overwrites files owned by other
packages. This usually means an old versio
Package: python-llfuse-dbg,python3-llfuse-dbg
Version: 0.40+dfsg-1
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
an upgrade test with piuparts revealed that your package installs files
over existing symlinks and possibly overwrites files owned by other
packages. This u
Package: bind9
Version: 1:9.9.5.dfsg-9
Severity: important
Dear Maintainer,
I have enabled inline signing in bind9, but even though I have set "directory
/var/cache/bind"
it tries to write temporary files into /etc/bind (which fails because the
debian file ownerships
are sensible and don't allo
Package: elinks
Version: 0.12~pre6-7
Severity: serious
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
an upgrade test with piuparts revealed that your package installs files
over existing symlinks and possibly overwrites files owned by other
packages. This usually means an old version of
Package: python-yaql
Version: 0.2.6-2
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned files on
the system after purge, which is a violation of policy 6.8:
https://www.debian.org/doc/debian-policy/ch-maint
Package: bind9utils
Version: 1:9.9.5.dfsg-9
Severity: important
Dear Maintainer,
dnssec-keygen creates *.private files with mode 0600, but /etc/bind belongs to
root and is
only setguid bind. This means that by default bind9 (running as bind) cannot
read them.
Manual intervention is required to
Hi,
On 09.06.2015 00:13, Andreas Beckmann wrote:
> Followup-For: Bug #656451
>
> Looks like the unowned files have returned:
>
> 0m47.7s ERROR: FAIL: Package purging left files on system:
> /etc/apparmor.d/local/bin.ping not owned
> /etc/apparmor.d/local/sbin.klogd not owned
> /e
Package: debian-installer
Severity: critical
Tags: d-i
Justification: breaks the whole system
Dear Maintainer,
Installing Debian 8.1 via PXE on an HP DL360 Gen9 server. HP updated the
firmware of the Smart Array P440ar Controller to Version 2.14 on March 31st,
2015. Debian-Installer is able to de
Followup-For: Bug #656451
Looks like the unowned files have returned:
0m47.7s ERROR: FAIL: Package purging left files on system:
/etc/apparmor.d/local/bin.ping not owned
/etc/apparmor.d/local/sbin.klogd not owned
/etc/apparmor.d/local/sbin.syslog-ng not owned
/etc/apparmor
Package: perl-modules
Version: 5.20.2-3+deb8u1
Severity: important
While there were no problems with Debian up to Debian 7,
ExtUtils::MakeMaker now installs perl modules in the wrong
directory. For instance, I build Math-MPFR-3.24 with:
unset PERL_LOCAL_LIB_ROOT PERL_MB_OPT PERL_MM_OPT
mkdir
On Mon, 2015-06-08 at 22:56 +0200, Alois Zoitl wrote:
> Hi,
>
>
> thanks. Looks like there is no Gnome for non Intel platforms. With
> XFCE and lightdm I got graphics partly working. Still rad and blue is
> exchanged.
[...]
GNOME Shell requires either 3D accelerated graphics or 'llvmpipe' which
Source: mrtg
Version: 2.17.4-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned depends:
perl-modules (>= 5.6.0)
however the package description states that perl-modules should be
considered an internal implementation detail
Source: slack
Version: 0.15.2-6
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned depends:
perl-modules (>= 5.6.1-7)
however the package description states that perl-modules should be
considered an internal implementation deta
Source: sympa
Version: 6.1.23~dfsg-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10) | libcgi-pm-perl (>= 3.35)
however the package description states that perl-modules should be
conside
* Matthias Klose [2015-06-08 03:20]:
> could you attach the preprocessed source together with the options
> to trigger this ICE? and maybe ask the ARM porters for help.
I'm looking into it.
--
Martin Michlmayr
http://www.cyrius.com/
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists
Source: module-build-cipux
Version: 0.4.0-7
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules
Source: libticket-simple-perl
Version: 0.0.2-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
and
perl-modules (>= 5.8.0-7~) | libtest-simple-perl
Source: libtest-xpath-perl
Version: 0.16-1
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules s
Source: libtemplate-plugin-class-perl
Version: 0.13-3
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10) | libmodule-build-perl
however the package description states that perl-modules shou
Source: libtap-parser-sourcehandler-pgtap-perl
Version: 3.29-1
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.14) | libtest-harness-perl (>= 3.23)
however the package description states tha
Source: libperl6-export-attrs-perl
Version: 0.0.3-1
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-
Source: libcal-dav-perl
Version: 0.6-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules shoul
Source: libnetsds-perl
Version: 1.301-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules shou
Source: libnetsds-kannel-perl
Version: 1.300-5
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modul
Source: libical-parser-sax-perl
Version: 1.09-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modu
Source: cipux-task
Version: 3.4.0.7-4
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules should
Source: cipux-storage
Version: 3.4.0.2-6
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules sho
Source: cipux-rpc
Version: 3.4.0.9-3
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules should
Source: cipux-rpc-client
Version: 3.4.0.7-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules
Source: cipux-object
Version: 3.4.0.5-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
3.4.0.3-4.1 contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules shoul
Source: cipux-passwd
Version: 3.4.0.3-2
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules shou
Source: cipux-rbac-simple
Version: 3.4.0.0-4
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
This package contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules
Source: cipux-dog
Version: 3.4.0.0-6
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
3.4.0.3-4.1 contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules should b
Source: cipux-cat-web
Version: 3.4.0.3-4.1
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
3.4.0.3-4.1 contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules sh
Package: python3-pep8
Version: 1.5.7-2
Severity: normal
Dear Maintainer,
I was investigating a pep8 related problem in Ubuntu[0], after
some triaging I found that python3-pep8 package comes with a very
different version of pep8.py than the one provided in pep8
package.
I rebuilt the package and
Source: cipux
Version: 3.4.0.13-4
Severity: important
User: debian-p...@lists.debian.org
Usertags: perl-5.22-transition
cipux contains a versioned build-depends:
perl-modules (>= 5.10.0) | libmodule-build-perl (>= 0.2808)
however the package description states that perl-modules should be
conside
Package: murano-agent
Version: 2015.1.0-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned files on
the system after purge, which is a violation of policy 6.8 (or 10.8):
https://www.debian.org/doc/debian-p
Actually, SSLv2 is not even supported by Apache 2.4. So that line is just
useless.
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Package: autofs
Version: 5.1.1-1
Severity: important
User: debian...@lists.debian.org
Usertags: piuparts
Hi,
during a test with piuparts I noticed your package left unowned files on
the system after purge, which is a violation of policy 6.8 (or 10.8):
https://www.debian.org/doc/debian-policy/ch-
Package: libfile-scan-perl
Version: 1.43-2
Severity: serious
X-Debbugs-Cc: mimedef...@packages.debian.org
This module was last updated upstream in 2005. For a module that deals
with virus scanning, that seems like a very long time. Is there
any reason to keep this package around, or should we rath
Package: puppet-module-puppetlabs-apache
Version: 1.1.1-1
In my manifest, I have:
class { '::apache’:
apache_version => 2.4,
...
}
class { 'apache::mod::ssl': }
In /etc/apache2/mods-enabled/ssl.conf, one can find:
SSLProtocol all -SSLv2
So SSLv3 is still enabled, as opposed to t
Hi,
thanks. Looks like there is no Gnome for non Intel platforms. With XFCE and
lightdm I got graphics partly working. Still rad and blue is exchanged.
But I don't want to hijack this bug for the graphics problems ;-)
Regards,
Alois
On Sat, Jun 6, 2015 at 1:57 PM, Manfred Stock <
manfred.stock+
Package: libboost1.55-dev
Version: 1.55.0+dfsg-3
Severity: serious
Justification: Policy 2.3
Dear Maintainer,
Several files in this package do not seem to be covered by any
license described in the copyright file.
Most serious:
interprocess/sync/xsi/advanced_xsi_semaphore.hpp : No license mention
Package: puppet-module-puppetlabs-apache
Version: 1.1.1-1
In my manifest, I have:
class { '::apache’:
apache_version => 2.4,
...
}
class { 'apache::mod::ssl': }
In /etc/apache2/mods-enabled/ssl.conf, one can find:
Mutex file:${APACHE_RUN_DIR}/ssl_mutex
When I start apache, I
1 - 100 of 274 matches
Mail list logo
