> On 17 Oct 2019, at 05:44, auto-mation-assist <[email protected]> wrote: > > I think that purge only works for a regular install and not a run as rip > configuration. I will always do a make clean before doing a make. I have > done all the normal make requirements which includes the “sudo make setuid”. > > I have tried everything I can think off right now including doing at least > five builds done with various options. All come out with the same result. The > builds themselves look good but I suspect that the linking to the kernel > flavor is the problem. I'm generating a updated kernel now (4.14.146-RT67) to > try. As a last resort I can build up a system on a unused computer from > scratch to eliminate the possibility of messing up my normal dvelopment > system to much.
I’d try installing a 4.9 RT kernel to see if it is indeed the kernel What happens when you configure only with --with-rt-preempt > My searched on the internet shows that there have been issues with the same > errors in the past by others along with discussions on flavors but I have not > run across a clear solution after many hours of searching. > > > > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/0eced7bf-38da-4b59-9817-2efbad66042b%40googlegroups.com. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/A5525B3F-F6AF-4869-81A2-806A60F918C5%40basdebruijn.com.
