Monitor resolution is fixed. Changes are done in the qsys video frame buffer cores.
On Thu, 18 Jul 2019, 01.59 justin White <[email protected]> wrote: > I used 2 instances of SSerial in the pinfile which was incorrect. I'm told > 1 instance covers 8 SSerial channels. I built a new .rbf with 1 instance > and still couldn't get it to work. PCW confirms that the encoder/stepgen > thing should work just fine so I'm pretty much out of ideas. > > On a side note, how might I go about changing the framebuffer resolution > to the HDMI? Only certain monitors will display anything from the DE10 > which makes it kind of a PIA to test this as I have to drag another monitor > down to my mill since my mill's monitor wont display the Nano. The way it's > achieving a resolution doesn't seem standard as no standard method of > changing it from 1024x768 seems to work. > > On Sunday, July 14, 2019 at 5:25:31 PM UTC-4, justin White wrote: >> >> There was something wrong with my build environment, deleted it and I was >> able to get a good .rbf. >> >> I wasn't able to get this working with my 8i20 though. I added >> "sserial_port_0=00xxxx" to the config line as in my other sserial configs. >> >> I'll probably hold off on anymore testing until I get a board fabbed with >> dedicated serial hardware, but the firmware could probably use some looking >> into. >> >> On Sunday, July 14, 2019 at 6:08:13 AM UTC-4, justin White wrote: >>> >>> Any insight on the issue with the rbf? >> >> -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to a topic in the > Google Groups "Machinekit" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/machinekit/eVhvTnuhblE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > Visit this group at https://groups.google.com/group/machinekit. > To view this discussion on the web visit > https://groups.google.com/d/msgid/machinekit/a35860c4-494e-4daa-8d65-5ed926dbc0af%40googlegroups.com > <https://groups.google.com/d/msgid/machinekit/a35860c4-494e-4daa-8d65-5ed926dbc0af%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/CAGKWNWMeCvTWzUtS_b78BCQeVNL5e7qduFONYBN5uZ8V018iPg%40mail.gmail.com.
