Same as attached on july 13 except I changed SS numinst to 1. On Wednesday, July 17, 2019 at 11:24:07 PM UTC-4, Charles Steinkuehler wrote: > > Got a link to your pin file for review? > > On 7/17/2019 6:59 PM, justin White wrote: > > I used 2 instances of SSerial in the pinfile which was incorrect. I'm > told > > 1 instance covers 8 SSerial channels. I built a new .rbf with 1 instance > > and still couldn't get it to work. PCW confirms that the encoder/stepgen > > thing should work just fine so I'm pretty much out of ideas. > > > > On a side note, how might I go about changing the framebuffer resolution > to > > the HDMI? Only certain monitors will display anything from the DE10 > which > > makes it kind of a PIA to test this as I have to drag another monitor > down > > to my mill since my mill's monitor wont display the Nano. The way it's > > achieving a resolution doesn't seem standard as no standard method of > > changing it from 1024x768 seems to work. > > > > On Sunday, July 14, 2019 at 5:25:31 PM UTC-4, justin White wrote: > >> > >> There was something wrong with my build environment, deleted it and I > was > >> able to get a good .rbf. > >> > >> I wasn't able to get this working with my 8i20 though. I added > >> "sserial_port_0=00xxxx" to the config line as in my other sserial > configs. > >> > >> I'll probably hold off on anymore testing until I get a board fabbed > with > >> dedicated serial hardware, but the firmware could probably use some > looking > >> into. > >> > >> On Sunday, July 14, 2019 at 6:08:13 AM UTC-4, justin White wrote: > >>> > >>> Any insight on the issue with the rbf? > >> > >> > > > > > -- > Charles Steinkuehler > [email protected] <javascript:> >
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/b24072c9-aa9c-4283-bcd5-7659d2f28749%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
PIN_st_fpga_soc_dc1e_ss.vhd
Description: Binary data
