I _think_ the debugging will get output to the log file if you launch with something like DEBUG=5.
I don't think you need to pass any parameters to the hm2_soc_ol driver, it's the hm2 module that takes things like the sserial= option. IIRC, with full debugging turned on, you'll get a dump with quite a bit of detail as the hm2 driver launches and starts auto-probing the hardware to see what's configured. On 7/18/2019 8:11 AM, justin White wrote: > Charles, is there any way to see that SSerial is actually running? Typically > when you start LinuxCNC from terminal Hm2 will print the sserial version > running first. I can’t see this by starting a config with Machinekit. I tried > launching a basic source file and manually loadrt from halrun but the > differences are such that I couldn’t figure out how to loadrt hm2_soc_ol with > any config options. I’m not sure if the “atlas_....sv” file needs a > modification. For smart serial, like I said I’m just using the same renamed > 3x24.sv I’ve been using. > > By “not work” i mean when starting MK plugged into the 8i20 from my mill I > get no hm2_5i25.0.8i20...... pins as I would with the 8i20 plugged into the > 7i76e/x86 pc installed on the mill. I didn’t have any issues with the cable, > connection I made for that and this is pretty much exactly the same. > > I’ve checked all my connections but I certainly wouldn’t rule out that I > missed something. It’d be great if I could find some evidence that either > sserial is actually running or that the hardware isn’t communicating anything > at all, like some sort of serial terminal where I could at least check for > some sort of handshake process. > -- Charles Steinkuehler [email protected] -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/98f02822-da76-6107-e4c5-1e3a65ba06a5%40steinkuehler.net. For more options, visit https://groups.google.com/d/optout.
