Le 3/12/25 à 17:51, Greg a écrit> According to my (very old) scripts you should
use something like
/dev/cciss/c1d0 instead of /dev//sg?
It could be the old driver/kernel module interface.
The one I have is /dev/sgx.
I have no /dev/cciss* present.
Besides, for HP Smart Array,
the example found in the documentation[1] uses a /dev/sg* path.
From the man page:
To look at disks behind HP Smart Array controllers, use syntax
such as:
smartctl -a -d cciss,0 /dev/cciss/c0d0 (cciss driver under
Linux)
smartctl -a -d cciss,0 /dev/sg2 (hpsa or hpahcisr drivers
under Linux)
[1] https://www.smartmontools.org/wiki/Supported_RAID-Controllers
--
yassine -- sysadm
http://about.me/ychaouche
Looking for side gigs.
