Dear list,

I have 5 disks on my server,
2x1 terabyte disks + 3x450 Gb disks,
but smartctl and cciss_vol_status only show 3 disks.
My controller is sg0 as shown in the output of lssci


  root@messagerie-recup[10.10.10.22] ~ # lsscsi -gs
  [1:0:0:0]    cd/dvd  hp       DVD A  DS8A5LH   1HE3  /dev/sr0   /dev/sg3   
1.07GB
  [2:0:0:0]    storage HP       P420i            3.22  -          /dev/sg0      
  -
  [2:1:0:0]    disk    HP       LOGICAL VOLUME   3.22  /dev/sda   /dev/sg1    
450GB
  [2:1:0:1]    disk    HP       LOGICAL VOLUME   3.22  /dev/sdb   /dev/sg2   
2.00TB
  root@messagerie-recup[10.10.10.22] ~ #


and this is the output from cciss

root@messagerie-recup[10.10.10.22] ~ # cciss_vol_status -V /dev/sg0
  Controller: Smart Array P420i
    Board ID: 0x3354103c
    Logical drives: 2
    Running firmware: 3.22
    ROM firmware: 3.22
  /dev/sda: (Smart Array P420i) RAID 1(1+0) Volume 0 status: Using interim 
recovery mode.
    Failed drives:
           connector 1I box 2 bay 2                  HP      EG0450FBLSF        
                  6XQ1HLAJ0000B239FN4Z     HPD7
Total of 1 failed physical drives detected on this logical drive.
  /dev/sdb: (Smart Array P420i) RAID 5 Volume 1 status: Using interim recovery 
mode.
    Failed drives:
           connector 2I box 2 bay 6                  HP      MM1000FBFVR        
                  9XG25D7Z00009248ZTUB     HPD5
Total of 1 failed physical drives detected on this logical drive.
    Physical drives: 3
           connector 1I box 2 bay 1                  HP      EG0450FBLSF        
                  6XQ1HGMC0000B307B4YK     HPD7 S.M.A.R.T. predictive failure.
           connector 2I box 2 bay 5                  HP      MM1000FBFVR        
                  9XG2CG0J00009250NWN4     HPD5 OK
           connector 2I box 2 bay 7                  HP      MM1000FBFVR        
                  9XG5RYDQ000094198GDT     HPD8 OK
  /dev/sg0(Smart Array P420i:0): Non-Volatile Cache status:
                     Cache configured: Yes
                   Total cache memory: 816 MiB
                          Cache Ratio: 10% Read / 90% Write
                    Read cache memory: 82 MiB
                   Write cache memory: 734 MiB
                  Write cache enabled: Yes
     Flash backed cache present
  root@messagerie-recup[10.10.10.22] ~ #



in particular, it says physical drives: 3
smartctl also detects 3 drives:



  root@messagerie-recup[10.10.10.22] ~ # for i in {0..10}; do smartctl -a -d 
cciss,"$i" /dev/sg0 | grep -E '(User Capacity|Serial number|Logical Unit id)'; 
done
  User Capacity:        450,098,159,616 bytes [450 GB]
  Logical Unit id:      0x5000c5005a341ef7
  Serial number:        6XQ1HGMC0000B307B4YK
  User Capacity:        1,000,204,886,016 bytes [1.00 TB]
  Logical Unit id:      0x5000c500421e7a3f
  Serial number:        9XG2CG0J00009250NWN4
  User Capacity:        1,000,204,886,016 bytes [1.00 TB]
  Logical Unit id:      0x5000c50057d167ff
  Serial number:        9XG5RYDQ000094198GDT
  root@messagerie-recup[10.10.10.22] ~ #




Halp!

Best,

--
yassine -- sysadm
http://about.me/ychaouche
Looking for side gigs.

Reply via email to