Le 3/12/25 à 23:11, Michael Stone a écrit :
Two of the drives are dead, you're not going to see anything from them
So this means I can't rely on smartctl to list physical disks,
which implies that,
for servers I didn't install,
I need to know their RAID setup in advance,
or at least the total number of disks,
then compare with the output of smartctl or cciss_vol_status.
and this is the output from cciss
[...]
in particular, it says physical drives: 3
That's 3 working physical drives. This array is both strange and shot. It looks
like thre was a raid 1 with a single 1TB drive, then a raid 5 of 3 smaller
drives and another 1TB drive. And another of the smaller drives in the raid 5
is about to die.
Sorry, I was wrong.
Array 1 = 450G + 450G in raid 1
Array 2 = 1T + 1T + 1T in raid 5
The failing drives are 450G in Array 1
and 1T in array 2,
and there's probably another 1T drive that's about to die.
Best,
--
yassine -- sysadm
http://about.me/ychaouche
Looking for side gigs.
