BeagleV 's pin layout is very similar to Rasaberry Pi On Sunday, January 17, 2021 at 10:59:22 PM UTC-8 Zain Ali wrote:
> yes, you are right. this is the first thing that i pointed out. > > On Friday, 15 January 2021 at 22:40:08 UTC+5 Hollis Ren wrote: > >> BeagleV 's pin layout is very similar to Rasaberry Pi >> 在2021年1月13日星期三 UTC+8 下午9:39:34<[email protected]> 写道： >> >>> >>> I got a mail message from seeed that introduced the BeagleV. >>> >>> Although I am very hopeful for a complete opensource hardware and >>> software platform, I noticed that the pin-layout and the compatibility of >>> the ARM-Beagleboards has been abandoned. >>> >>> I also noticed on the specs that the GPIO pins could be used for any >>> kind of communication protocol, be it UART, SPI, SDIO etc. >>> >>> I am currently using 3 UART ports on a BeagleBone to communicate with >>> some peripherals. >>> >>> Would that still be possible in the new design? >>> >>> I also noted the RS485, or Canbus was not described in the IO. >>> >>> Can anyone involved in the design comment on these observations? >>> (Why abandon the old pin layout, how to implement three UARTS or 2 >>> I2C's, and why no CANBus availability) >>> >>> Kind Regards >>> Johan Henselmans >>> >>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/3b3d09d4-da64-45f2-82c1-8022c0dfb040n%40googlegroups.com.
