yes, you are right. this is the first thing that i pointed out. On Friday, 15 January 2021 at 22:40:08 UTC+5 Hollis Ren wrote:
> BeagleV 's pin layout is very similar to Rasaberry Pi > 在2021年1月13日星期三 UTC+8 下午9:39:34<[email protected]> 写道： > >> >> I got a mail message from seeed that introduced the BeagleV. >> >> Although I am very hopeful for a complete opensource hardware and >> software platform, I noticed that the pin-layout and the compatibility of >> the ARM-Beagleboards has been abandoned. >> >> I also noticed on the specs that the GPIO pins could be used for any kind >> of communication protocol, be it UART, SPI, SDIO etc. >> >> I am currently using 3 UART ports on a BeagleBone to communicate with >> some peripherals. >> >> Would that still be possible in the new design? >> >> I also noted the RS485, or Canbus was not described in the IO. >> >> Can anyone involved in the design comment on these observations? >> (Why abandon the old pin layout, how to implement three UARTS or 2 I2C's, >> and why no CANBus availability) >> >> Kind Regards >> Johan Henselmans >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0a110e7c-4775-4479-ab55-fad9155f52e7n%40googlegroups.com.
