> > > Follow Roberts instruction in this post > <https://groups.google.com/d/msg/beagleboard/CN5qKSmPIbc/58Yl0s6XAQAJ>, > in order to provide the necessary debugging informations. > > I have read enough of this board to know that question was coming, so I posted the output of /opt/scripts/tools/version.sh in my initial post. Here it is in case it wasn't clear:
debian@beaglebone:/boot$ sudo /opt/scripts/tools/version.sh git:/opt/scripts/:[24f2e3495113a63c2dcc2c0bdc0d7660b54e4e8f] eeprom:[A335BNLTBLA21722EL002623] model:[TI_AM335x_BeagleBone_Blue] dogtag:[BeagleBoard.org Debian Image 2018-10-07] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2018.09-00002-g0b54a51eee]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2018.09-00002-g0b54a51eee]:[location: dd MBR] kernel:[4.19.28-bone28] nodejs:[v6.16.0] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_addr4=/lib/firmware/BB-I2C1-00A0.dtbo] uboot_overlay_options:[uboot_overlay_addr5=/lib/firmware/BB-W1-BLUE-00A0.dtbo] uboot_overlay_options:[uboot_overlay_addr6=/lib/firmware/libpruio-0A00.dtbo] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20190123.0-0rcnee0~stretch+20190123] pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[librobotcontrol]:[1.0.4-git20190107.0-0rcnee0~stretch+20190108] pkg:[firmware-ti-connectivity]:[20180825+dfsg-1rcnee1~stretch+20181217] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep remote [ 0.992529] remoteproc remoteproc0: wkup_m3 is available [ 1.091092] remoteproc remoteproc0: powering up wkup_m3 [ 1.091113] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 1.095377] remoteproc remoteproc0: remote processor wkup_m3 is now up dmesg | grep pru W1-BLUE is a custom dtbo for 1 wire. libpruio dtbo is probably not actually referencing anything (I think I put it there as a misstep toward troubleshooting this issue) Another thought I had is that perhaps there is a conflict with librobotcontrol using the PRU when librpuio wants to. Thank you for your help! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c0583977-991a-45a0-9ff0-010e566e187b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
