You are correct. Inside means the IP Network and Outside means the PSTN accessible via the Audiocodes MP-108 gateway.
No QoS. Thanks - Jeff -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve Blair Sent: Tuesday, November 29, 2005 4:20 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Static on inside end of conversation Jeff Busch wrote: >Hello, > >I am running the following configuration: > >2.8ghz P4 with 1GB of RAM >Audiocodes MP-108 connected to 5 POTS lines Polycom IP-500 phones >[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9) > >End users are complaining of an echo and static on the inside end (the >internal side), but the outside end of the conversation doeesn't notice >anything. > > > I'm assuming inside means on the IP network and outside means on the PSTN which is accessible via a gateway is this correct? If so do you have QoS enabled on the inside? >Does anyone have any suggestions on troubleshooting / fixing this >problem? > >Thanks! > >Jeff > > > >_______________________________________________ >--Bandwidth and Colocation provided by Easynews.com -- > >Asterisk-Users mailing list >To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
