I have a very similar server, pstn setup, phones, and user base, and I
switched over to G729 codec 'cause the polycoms support it. While the
call quality has dropped ever so slightly (I have received no complaints
from my users however), snaps, crackles, clicks and pops are gone. I
did not have as extreme a case of static it seems, though. This will
take more processor power, and will probably make any lost interrupts
more evident.
Moj
Jeff Busch wrote:
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 connected to 5 POTS lines
Polycom IP-500 phones
[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9)
End users are complaining of an echo and static on the inside end (the
internal side), but the outside end of the conversation doeesn't notice
anything.
Does anyone have any suggestions on troubleshooting / fixing this
problem?
Thanks!
Jeff
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mojo <[EMAIL PROTECTED]>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
