Jeff Busch wrote:
Hello,
I am running the following configuration:
2.8ghz P4 with 1GB of RAM
Audiocodes MP-108 connected to 5 POTS lines
Polycom IP-500 phones
[EMAIL PROTECTED] 1.3 (this is Asterisk 1.0.9)
End users are complaining of an echo and static on the inside end (the
internal side), but the outside end of the conversation doeesn't notice
anything.
I'm assuming inside means on the IP network and outside means on the
PSTN which is
accessible via a gateway is this correct? If so do you have QoS enabled
on the
inside?
Does anyone have any suggestions on troubleshooting / fixing this
problem?
Thanks!
Jeff
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
