Its not hard to find the size you require. I shop for the Gutman Windscreens on eBay and I just type in "Gutman Zoom H1N" for example which turns up the appropriate windscreen size.
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of Aidan Sent: Thursday, 12 September 2019 9:58 PM To: [email protected] Subject: Re: [all-audio] h1n furder findings not discussed yet by anyone Good idea, seems they make different sizes. On 9/12/19, Dane Trethowan <[email protected]> wrote: > I got a Windscreen with my recorder though I’m going to see if a > Gutman type is available which are far better. > > >> On 12 Sep 2019, at 6:48 pm, Aidan <[email protected]> wrote: >> >> Really, great. The mikes is very sensitive, and I don't no wich wind >> screen to use, I only have those of the h4n but when I used it with >> GoldWave I had very good results. Stil need to do a few other tests >> outside. I don't like the auto gain much, there olympus does better, >> and the limiter have some noise so don't want to use it much, but the >> rest is up to standard. I cannot get it to work on ios, so need to >> maybe call zoom for that one. >> >> On 9/12/19, Dane Trethowan <[email protected]> wrote: >>> So how are you finding the recorder thus far? >>> >>> >>>> On 9 Sep 2019, at 8:25 pm, Aidan <[email protected]> wrote: >>>> >>>> Ok, I got one of these for a few days now, and now hope to answer >>>> stuff that were still remained unclear. >>>> When working with the four buttons, audio format, LowCut, limiter, >>>> and auto gain, its best to give each to quick presses to ensure >>>> that you actually toggle a setting, because the first press only >>>> give status as to the current setting value. >>>> The formats in sequence, are to my knoledge: >>>> wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3 >>>> 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps. >>>> You can here the LowCut and limiter when they on/off when having >>>> headphones connected. >>>> To access the extra recording features, there is no menu button. >>>> You must hold down the stop button, then while holding down, the >>>> for buttons become the following from left to rite. >>>> Auto record, pre record, self timer, and sound marker. >>>> >>>> This makes it very easy to change settings. >>>> So while holding down stop, you press the auto gain button for >>>> example, twice, and it will turn on/off the sound marker. >>>> When doing playback, this is what happens. >>>> After pressing play, the back and forward buttons will skip files, >>>> and to forward/rewind you must hold them down. >>>> But dearing playback the four buttons shows the following. >>>> from left to rite: >>>> Mark, info, repeat, and moad. >>>> And the marks you create when pressing the mark button only once >>>> per time, will be usable in goldwave/soundforge. >>>> I don't manage to see the marks in total recorder. >>>> When pressing the LowCut wich become info dearing playbac, you >>>> enter a file info screen wich you must navigate, and don't have >>>> much use to us normally, so I didn't play there really. >>>> Repeat also is working by pressing the button twice quickly to >>>> change between, repeat one, repeat all, and off. >>>> When pressing the auto gain button wich became moad dearing >>>> playback, a new screen appears. >>>> Then you find that the buttons from left to rite become: >>>> Speed, Sound/EQ a - b repeat, and return to previous screen. >>>> As the file play you will here as you change speed with the audio >>>> format button, or the EQ with the LowCut button. >>>> Same with A B repeat. And also while in that screen, the forward >>>> and back buttons will move more rapitly fru the file when pressed >>>> and let go as suppose to holding them down. >>>> If you stop playback you can exit that screen or just press the >>>> auto gain button wich will take you to the first playback screen >>>> you get when pressing play, wich contain mark, info, repeat, and mode. >>>> When connecting to pc this is what you get, the USB screen each >>>> time a cable is connected, will lands on audio interface mode or >>>> whatever they call it. >>>> You then need to press the limiter once to move to card reader and >>>> then press the auto gain button wich will act as enter, and mass >>>> storage will connect. >>>> When disconnecting from pc, and this was never discussed, I guess >>>> there could be more than one way to do it, I don't no, but this is >>>> what I found. >>>> I press and hold down the stop button, then the format button >>>> becomes direct monitor on/off, and the auto gain button becomes exit. >>>> So while holding stop I press auto gain once, then the exit screen >>>> comes up, then I press LowCut wich is up arrow, and auto gain for >>>> enter, then it will return to the main screen and you will here pc >>>> disconnect. >>>> If you don't interact with it after removing the cable it won't >>>> return to your file list or recording screen. >>>> >>>> As for sound card mode, this is what you get. >>>> When inserting the cable, it will move to audio interface mode each >>>> time. >>>> Now you press auto gain to enter, then you can choose between >>>> pc/mac or ios. >>>> It will land on pc/mac each time you press enter on the audio >>>> interface option. >>>> So you can just press enter again, then it will ask for wich sorce >>>> you want to use for power, Buss power or batteries? >>>> It lands on buss power each time that promt is accessed, so you can >>>> just press enter again. Only then your inputs and outputs will >>>> appear in windows/mac. >>>> I stil have to figure out ios mode. >>>> When deleting a file you press delete, then LowCut for up arrow, >>>> then enter/auto gain to except/confirm. >>>> I stil have to figure out how to delete marks on the recorder. >>>> Currently I delete them from GoldWave. >>>> Lastly, to access the setting screen, (sited help is well needed >>>> here) you hold down delete while powering on. >>>> to update the firmware after copyed the bin file to the SD card, >>>> you hold down the play/pause button while powering on. >>>> >>>> And to overdub, you hold play/pause and then press record. >>>> Just keep format set to wave. >>>> >>>> Hope this can help as only some things were breethly mentioned and >>>> the manual not well rittin. >>>> >>>> Aidan >>>> >>>> >>>> >>> >>> >>> >>> >>> >> >> >> > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2829): https://groups.io/g/all-audio/message/2829 Mute This Topic: https://groups.io/mt/34078119/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
