I haven't managed to work out how to overdub yet though to be fair I just haven't had all that much time with the H1N recorder lately so - when I finally get around to the recorder - I'm probably going to have to drag out all my notes on the recorder and familiarise myself with the machine all over again <smile>, makes life worth living you know.
-----Original Message----- From: [email protected] <[email protected]> On Behalf Of Aidan Sent: Thursday, 12 September 2019 6:48 PM To: [email protected] Subject: Re: [all-audio] h1n furder findings not discussed yet by anyone Really, great. The mikes is very sensitive, and I don't no wich wind screen to use, I only have those of the h4n but when I used it with GoldWave I had very good results. Stil need to do a few other tests outside. I don't like the auto gain much, there olympus does better, and the limiter have some noise so don't want to use it much, but the rest is up to standard. I cannot get it to work on ios, so need to maybe call zoom for that one. On 9/12/19, Dane Trethowan <[email protected]> wrote: > So how are you finding the recorder thus far? > > >> On 9 Sep 2019, at 8:25 pm, Aidan <[email protected]> wrote: >> >> Ok, I got one of these for a few days now, and now hope to answer >> stuff that were still remained unclear. >> When working with the four buttons, audio format, LowCut, limiter, >> and auto gain, its best to give each to quick presses to ensure that >> you actually toggle a setting, because the first press only give >> status as to the current setting value. >> The formats in sequence, are to my knoledge: >> wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3 >> 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps. >> You can here the LowCut and limiter when they on/off when having >> headphones connected. >> To access the extra recording features, there is no menu button. >> You must hold down the stop button, then while holding down, the for >> buttons become the following from left to rite. >> Auto record, pre record, self timer, and sound marker. >> >> This makes it very easy to change settings. >> So while holding down stop, you press the auto gain button for >> example, twice, and it will turn on/off the sound marker. >> When doing playback, this is what happens. >> After pressing play, the back and forward buttons will skip files, >> and to forward/rewind you must hold them down. >> But dearing playback the four buttons shows the following. >> from left to rite: >> Mark, info, repeat, and moad. >> And the marks you create when pressing the mark button only once per >> time, will be usable in goldwave/soundforge. >> I don't manage to see the marks in total recorder. >> When pressing the LowCut wich become info dearing playbac, you enter >> a file info screen wich you must navigate, and don't have much use to >> us normally, so I didn't play there really. >> Repeat also is working by pressing the button twice quickly to change >> between, repeat one, repeat all, and off. >> When pressing the auto gain button wich became moad dearing playback, >> a new screen appears. >> Then you find that the buttons from left to rite become: >> Speed, Sound/EQ a - b repeat, and return to previous screen. >> As the file play you will here as you change speed with the audio >> format button, or the EQ with the LowCut button. >> Same with A B repeat. And also while in that screen, the forward and >> back buttons will move more rapitly fru the file when pressed and let >> go as suppose to holding them down. >> If you stop playback you can exit that screen or just press the auto >> gain button wich will take you to the first playback screen you get >> when pressing play, wich contain mark, info, repeat, and mode. >> When connecting to pc this is what you get, the USB screen each time >> a cable is connected, will lands on audio interface mode or whatever >> they call it. >> You then need to press the limiter once to move to card reader and >> then press the auto gain button wich will act as enter, and mass >> storage will connect. >> When disconnecting from pc, and this was never discussed, I guess >> there could be more than one way to do it, I don't no, but this is >> what I found. >> I press and hold down the stop button, then the format button becomes >> direct monitor on/off, and the auto gain button becomes exit. >> So while holding stop I press auto gain once, then the exit screen >> comes up, then I press LowCut wich is up arrow, and auto gain for >> enter, then it will return to the main screen and you will here pc >> disconnect. >> If you don't interact with it after removing the cable it won't >> return to your file list or recording screen. >> >> As for sound card mode, this is what you get. >> When inserting the cable, it will move to audio interface mode each time. >> Now you press auto gain to enter, then you can choose between pc/mac >> or ios. >> It will land on pc/mac each time you press enter on the audio >> interface option. >> So you can just press enter again, then it will ask for wich sorce >> you want to use for power, Buss power or batteries? >> It lands on buss power each time that promt is accessed, so you can >> just press enter again. Only then your inputs and outputs will appear >> in windows/mac. >> I stil have to figure out ios mode. >> When deleting a file you press delete, then LowCut for up arrow, then >> enter/auto gain to except/confirm. >> I stil have to figure out how to delete marks on the recorder. >> Currently I delete them from GoldWave. >> Lastly, to access the setting screen, (sited help is well needed >> here) you hold down delete while powering on. >> to update the firmware after copyed the bin file to the SD card, you >> hold down the play/pause button while powering on. >> >> And to overdub, you hold play/pause and then press record. >> Just keep format set to wave. >> >> Hope this can help as only some things were breethly mentioned and >> the manual not well rittin. >> >> Aidan >> >> >> > > > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2828): https://groups.io/g/all-audio/message/2828 Mute This Topic: https://groups.io/mt/34078119/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
