So how are you finding the recorder thus far?
> On 9 Sep 2019, at 8:25 pm, Aidan <[email protected]> wrote: > > Ok, I got one of these for a few days now, and now hope to answer > stuff that were still remained unclear. > When working with the four buttons, audio format, LowCut, limiter, and > auto gain, its best to give each to quick presses to ensure that you > actually toggle a setting, because the first press only give status as > to the current setting value. > The formats in sequence, are to my knoledge: > wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3 > 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps. > You can here the LowCut and limiter when they on/off when having > headphones connected. > To access the extra recording features, there is no menu button. > You must hold down the stop button, then while holding down, the for > buttons become the following from left to rite. > Auto record, pre record, self timer, and sound marker. > > This makes it very easy to change settings. > So while holding down stop, you press the auto gain button for > example, twice, and it will turn on/off the sound marker. > When doing playback, this is what happens. > After pressing play, the back and forward buttons will skip files, and > to forward/rewind you must hold them down. > But dearing playback the four buttons shows the following. > from left to rite: > Mark, info, repeat, and moad. > And the marks you create when pressing the mark button only once per > time, will be usable in goldwave/soundforge. > I don't manage to see the marks in total recorder. > When pressing the LowCut wich become info dearing playbac, you enter a > file info screen wich you must navigate, and don't have much use to us > normally, so I didn't play there really. > Repeat also is working by pressing the button twice quickly to change > between, repeat one, repeat all, and off. > When pressing the auto gain button wich became moad dearing playback, > a new screen appears. > Then you find that the buttons from left to rite become: > Speed, Sound/EQ a - b repeat, and return to previous screen. > As the file play you will here as you change speed with the audio > format button, or the EQ with the LowCut button. > Same with A B repeat. And also while in that screen, the forward and > back buttons will move more rapitly fru the file when pressed and let > go as suppose to holding them down. > If you stop playback you can exit that screen or just press the auto > gain button wich will take you to the first playback screen you get > when pressing play, wich contain mark, info, repeat, and mode. > When connecting to pc this is what you get, > the USB screen each time a cable is connected, will lands on audio > interface mode or whatever they call it. > You then need to press the limiter once to move to card reader and > then press the auto gain button wich will act as enter, and mass > storage will connect. > When disconnecting from pc, and this was never discussed, I guess > there could be more than one way to do it, I don't no, but this is > what I found. > I press and hold down the stop button, then the format button becomes > direct monitor on/off, and the auto gain button becomes exit. > So while holding stop I press auto gain once, then the exit screen > comes up, then I press LowCut wich is up arrow, and auto gain for > enter, then it will return to the main screen and you will here pc > disconnect. > If you don't interact with it after removing the cable it won't return > to your file list or recording screen. > > As for sound card mode, this is what you get. > When inserting the cable, it will move to audio interface mode each time. > Now you press auto gain to enter, then you can choose between pc/mac or ios. > It will land on pc/mac each time you press enter on the audio interface > option. > So you can just press enter again, then it will ask for wich sorce you > want to use for power, Buss power or batteries? > It lands on buss power each time that promt is accessed, so you can > just press enter again. Only then your inputs and outputs will appear > in windows/mac. > I stil have to figure out ios mode. > When deleting a file you press delete, then LowCut for up arrow, then > enter/auto gain to except/confirm. > I stil have to figure out how to delete marks on the recorder. > Currently I delete them from GoldWave. > Lastly, to access the setting screen, (sited help is well needed here) > you hold down delete while powering on. > to update the firmware after copyed the bin file to the SD card, you > hold down the play/pause button while powering on. > > And to overdub, you hold play/pause and then press record. > Just keep format set to wave. > > Hope this can help as only some things were breethly mentioned and the > manual not well rittin. > > Aidan > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2823): https://groups.io/g/all-audio/message/2823 Mute This Topic: https://groups.io/mt/34078119/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
