I got a Windscreen with my recorder though I’m going to see if a Gutman type is available which are far better.
> On 12 Sep 2019, at 6:48 pm, Aidan <[email protected]> wrote: > > Really, great. The mikes is very sensitive, and I don't no wich wind > screen to use, I only have those of the h4n but when I used it with > GoldWave I had very good results. Stil need to do a few other tests > outside. I don't like the auto gain much, there olympus does better, > and the limiter have some noise so don't want to use it much, but the > rest is up to standard. I cannot get it to work on ios, so need to > maybe call zoom for that one. > > On 9/12/19, Dane Trethowan <[email protected]> wrote: >> So how are you finding the recorder thus far? >> >> >>> On 9 Sep 2019, at 8:25 pm, Aidan <[email protected]> wrote: >>> >>> Ok, I got one of these for a few days now, and now hope to answer >>> stuff that were still remained unclear. >>> When working with the four buttons, audio format, LowCut, limiter, and >>> auto gain, its best to give each to quick presses to ensure that you >>> actually toggle a setting, because the first press only give status as >>> to the current setting value. >>> The formats in sequence, are to my knoledge: >>> wave 44.1/16bit. Wave 48/16bit, wave 48/24bit, wave 96/24bit, mp3 >>> 128kbps, mp3 192 kbps, mp3 256kbps, mp3 320kbps. >>> You can here the LowCut and limiter when they on/off when having >>> headphones connected. >>> To access the extra recording features, there is no menu button. >>> You must hold down the stop button, then while holding down, the for >>> buttons become the following from left to rite. >>> Auto record, pre record, self timer, and sound marker. >>> >>> This makes it very easy to change settings. >>> So while holding down stop, you press the auto gain button for >>> example, twice, and it will turn on/off the sound marker. >>> When doing playback, this is what happens. >>> After pressing play, the back and forward buttons will skip files, and >>> to forward/rewind you must hold them down. >>> But dearing playback the four buttons shows the following. >>> from left to rite: >>> Mark, info, repeat, and moad. >>> And the marks you create when pressing the mark button only once per >>> time, will be usable in goldwave/soundforge. >>> I don't manage to see the marks in total recorder. >>> When pressing the LowCut wich become info dearing playbac, you enter a >>> file info screen wich you must navigate, and don't have much use to us >>> normally, so I didn't play there really. >>> Repeat also is working by pressing the button twice quickly to change >>> between, repeat one, repeat all, and off. >>> When pressing the auto gain button wich became moad dearing playback, >>> a new screen appears. >>> Then you find that the buttons from left to rite become: >>> Speed, Sound/EQ a - b repeat, and return to previous screen. >>> As the file play you will here as you change speed with the audio >>> format button, or the EQ with the LowCut button. >>> Same with A B repeat. And also while in that screen, the forward and >>> back buttons will move more rapitly fru the file when pressed and let >>> go as suppose to holding them down. >>> If you stop playback you can exit that screen or just press the auto >>> gain button wich will take you to the first playback screen you get >>> when pressing play, wich contain mark, info, repeat, and mode. >>> When connecting to pc this is what you get, >>> the USB screen each time a cable is connected, will lands on audio >>> interface mode or whatever they call it. >>> You then need to press the limiter once to move to card reader and >>> then press the auto gain button wich will act as enter, and mass >>> storage will connect. >>> When disconnecting from pc, and this was never discussed, I guess >>> there could be more than one way to do it, I don't no, but this is >>> what I found. >>> I press and hold down the stop button, then the format button becomes >>> direct monitor on/off, and the auto gain button becomes exit. >>> So while holding stop I press auto gain once, then the exit screen >>> comes up, then I press LowCut wich is up arrow, and auto gain for >>> enter, then it will return to the main screen and you will here pc >>> disconnect. >>> If you don't interact with it after removing the cable it won't return >>> to your file list or recording screen. >>> >>> As for sound card mode, this is what you get. >>> When inserting the cable, it will move to audio interface mode each time. >>> Now you press auto gain to enter, then you can choose between pc/mac or >>> ios. >>> It will land on pc/mac each time you press enter on the audio interface >>> option. >>> So you can just press enter again, then it will ask for wich sorce you >>> want to use for power, Buss power or batteries? >>> It lands on buss power each time that promt is accessed, so you can >>> just press enter again. Only then your inputs and outputs will appear >>> in windows/mac. >>> I stil have to figure out ios mode. >>> When deleting a file you press delete, then LowCut for up arrow, then >>> enter/auto gain to except/confirm. >>> I stil have to figure out how to delete marks on the recorder. >>> Currently I delete them from GoldWave. >>> Lastly, to access the setting screen, (sited help is well needed here) >>> you hold down delete while powering on. >>> to update the firmware after copyed the bin file to the SD card, you >>> hold down the play/pause button while powering on. >>> >>> And to overdub, you hold play/pause and then press record. >>> Just keep format set to wave. >>> >>> Hope this can help as only some things were breethly mentioned and the >>> manual not well rittin. >>> >>> Aidan >>> >>> >>> >> >> >> >> >> > > > -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#2825): https://groups.io/g/all-audio/message/2825 Mute This Topic: https://groups.io/mt/34078119/21656 Group Owner: [email protected] Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
