I have this same RTL8111B chip on my MSI X48 Platinum, and I have
problems with it too. I've been looking around, and I have found some
other discussions about this. When using this chip with either Ubuntu
(Gutsy was the last version I had on there) and Gentoo, transferring a
moderate amount of d
I haven't tried Hardy or Intrepid because I switched to Gentoo on that
box. (Ubuntu on the desktop, but I wanted a totally stripped system for
my compute machine.)
Anyhow, here's what lspci tells me:
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit E
I'll try the live CD. My evidence that it was the NIC is that when all
I did was switch to using the Intel NIC, I no longer had any trouble.
Mind you, there could be a defect in the board. But the hang I observe
seems so much like the others that I don't want to call it a
coincidence.
--
RTL811
I can verify that the DVD I burned was in fact readable on other Macs.
--
Users do not have permission to open files in DVDs burnt in a Mac
https://bugs.launchpad.net/bugs/72872
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-
Public bug reported:
I just did a clean install of 9.04 server rc. I did have a heck of a
time wresting with partman, but I finally, after several tries, got my
disks set up with mdraid. (I had trouble like this with partman as far
back as Gutsy.)
Here's my partition layout (same on both disks,
Public bug reported:
I'm trying to install 9.04 server rc, and I've noticed that there are no
options for setting up a static IP address. This is a server
distribution, which means that most of the time, static IP is going to
be preferable, so I would expect the installer to assume this. Still,
After some research, I found a temporary work-around. When the boot
fails, I get dropped into busybox. I can type this:
mdadm -As
exit
And then it boots fine. How do I fix this permanently?
--
9.04 server rc clean install mdraid "no block devices found"
https://bugs.launchpad.net/bugs/363434
Here's another person who ran into this problem:
http://ubuntuforums.org/showthread.php?t=1121121
--
9.04 server rc clean install mdraid "no block devices found"
https://bugs.launchpad.net/bugs/363434
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Well, in that case, something else is broken, because DMA capability
should be automatically detected, right?
--
K3b slow dvd burn speed
https://bugs.launchpad.net/bugs/31709
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs
I can't speak for others, but I can tell you how things have been
working for me.
First of all, the system I'm using is a quad-core Core 2 running at
3.4GHz, and the drive I'm using is a 22x SATA DVD burner that supports
DMA. All of those things conspire to hide software inefficiencies. The
driv
I want to thank you very much, Dustin Kirkland, for all of the work I
have seen you put into the various RAID issues I and others had observed
with Ubuntu. It's people like you who polish the "little things" that
turn a good Linux experience into a fantastic Ubuntu experience.
Although I have rec
Public bug reported:
I have a Radeon 9200SE that I've used many times before with Ubuntu. It
has two monitor ports. One DVI-I, and another VGA. I'm installing
8.04.1, and now I'm having a problem with graphics.
If I boot the live CD with an analog monitor connected to the DVI-I port
with an an
** Description changed:
A few references to start off with:
http://www.ubuntuforums.org/showthread.php?t=283881
https://launchpad.net/distros/ubuntu/+source/partman-md/+bug/22301
https://launchpad.net/distros/ubuntu/+bug/58892
https://launchpad.net/distros/ubuntu/+bug/58893
https://
Public bug reported:
This is a kernel bug. Actually, it's intended behavior, but it
shouldn't be.
In theory, fake RAID and software RAID should be the same thing. The
only practical difference is where they get their metadata from. One
from the system BIOS, the other from the disk. However, i
Can we raise the priority on this? Nedit is a popular editor. In fact,
it's one of the few I can stand to use. Also, can we find out who
maintains Lesstif?
I think this is one of those cases where a major distro, like Ubuntu, is
going to have to throw its weight around to get anything done on t
Here's my January 2007 post to the Lesstif bug database on this issue:
http://sourceforge.net/tracker/index.php?func=detail&aid=1637320&group_id=8596&atid=108596
There are currently only 5 comments on this. How about we get some
additional posts there to let them know that this is still a proble
I think it was Dapper Drake I was using with that card. Since I gave
away the chassis of the computer I was testing this in, I may have some
trouble finding another to test in. I'll see what I can do. The same
problem happens with the live CD. BTW, this is an off-brand graphics
card with an ATI
I'm definitely an experienced user, but this one definitely flummoxed me
for longer than I would like to admit. I would never have expected
something like this would happen, so it stumped me. It doesn't seem
logical that a read-only removable device would show up with permissions
like this.
--
Public bug reported:
In trying to get a Verizon EVDO usb cellular modem to work with Ubuntu,
the system is incorrectly recognizing it as a USB mass storage device,
which is likely what's making me completely unable to make it work
properly.
When I plug the device in, this is what I see in /var/lo
In my case, the DVD was burned on a Mac, and there were no odd
permissions on the files. It may be that the Mac did the wrong thing
when it created the ISO. In that case, this comes down to a
compatibility issue. Sometimes, you have to bite the bullet and work
around someone else's bug.
--
Use
Public bug reported:
I'm starting from an unstable install of Dapper that I want to upgrade.
If some of these problems I'm reporting are due to old bugs, you might
want to check to make sure that the updater updates itself first
whenever someone wants to upgrade.
After going through several updat
When I run adept_updater from the command line, this is what I get:
sudo adept_updater
kapture::PkgSystem::PkgSystem()
adept_updater: PackageDetails::setPackage()
adept_updater: PackageInfo::setPackage()
adept_updater: ERROR: Communication problem with adept_updater, it probably
crashed.
KCrash:
Public bug reported:
Binary package hint: konqueror
This web page causes all sorts of havoc with Konqueror:
http://blogs.pcworld.com/techlog/archives/002950.html
Right-clicking on one of the embedded flash viewers hangs up the X
server. First, a context menu appears, but it's inoperable. Then
Two potential causes come to mind as to what might be going wrong:
(1) Some kind of breakage occurs in nedit or lesstif (probably lesstif,
given what people are saying about a related bug) that makes it stop
working.
(2) Lesstif does not interact correctly with the environment (X11, KDE,
etc.) an
Public bug reported:
Binary package hint: kaffeine
Note that this is not a complaint about specific unsupported codecs.
Also note that other people claim to have been able to get this working,
so I hesitate to report this as a bug. But there seems that there is a
bug.
I'm using Dapper, and I'd
** Summary changed:
- Kaffeine unable to find installed codecs
+ Kaffeine fails silently on missing codecs
** Description changed:
- Binary package hint: kaffeine
+ When Kaffeine is missing a codec, it fails silently. For the new user,
+ there is no way to tell what's gone wrong, and no clues a
Public bug reported:
Binary package hint: k3b
[I'm using Dapper, stable, up to date.] When using k3b, I like to
select the option to verify the data that was burned to the CD. When
burning is finished, k3b ejects the CD and then retracts it to do the
verify. When the CD is retracted, I get the
I'm using the "Alternative install" CD for Kubuntu, Edgy Eft, Knot 2. I
have two 120GB drives (PATA, Seagate), and I'm trying to set up software
RAID1 across them. I have an Athlon 2800+ with a KT400 chipset.
Here are the steps I follow:
1) [All of the setup prior to the partitioner starting.]
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and pulled the power connector from the
secondary disk. I booted up, and all was fine. [I will file another
bug report related t
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and pulled the power connector from the
secondary disk. I booted up, and all was fine.
The thing that really disturbs me is that
Public bug reported:
I have two identical drives that I have configured as RAID1. I set up
software RAID1 on them and installed Dapper.
After installing, I shut down and disconnected power from the seconday
disk. Everything booted just fine.
I shut down again and reconnected the secondary driv
Note: I installed gkrellm (a system monitoring tool), and I have been
able to verify that both drives are indeed being used. So it must be a
GRUB problem.
--
Critical Dapper bug: Cannot boot from seconday RAID1 disk
https://launchpad.net/bugs/58894
--
ubuntu-bugs mailing list
ubuntu-bugs@list
Public bug reported:
This should be a wishlist item, but I also think it's important that it
get into Edgy.
My sound hardware doesn't directly support MIDI, so I have to use
timidity. I don't know how to manually set it up, so I'm still reading
through stuff to get it working.
To be considered
Additionally, I can confirm that it is an installation issue where the
installer did not properly install GRUB on the secondary drive. I did
some research and figured out how to set it up manually. Now it will
boot from the secondary drive.
At the very minimum, the installer should warn the user
I would like to suggest that, when the user logs in, they should see a
graphical dialog that reports that a drive is missing from the array (or
whatever the situation is) so that they know that there's a problem.
--
Critical Dapper bug: Missing secondary from software RAID1, no message or
warnin
I would suggest that, after logging in, the user should see a dialog
that reports that it thinks a new drive has been added that looks like
one they'd like to add to the array and ask them if they want to hot-add
it.
--
Critical Dapper bug: RAID1, reconnect secondary drive, no attempt made to
re
Public bug reported:
Binary package hint: nedit
I would like to change the menubar font for nedit. The docs from nedit
about this are on this page:
http://fresh.t-systems-
sfr.com/linux/src/nedit-5.5-src.tar.gz:a/nedit-5.5/doc/html/resources.html
The suggestion is to put this line:
nedit*font
Note: It was pointed out by nedit developers that "helvetica medium 12
points" is not a valid font name. I just wanted to clarify that I did
indeed try several other values for this field, including a number of
valid X11 font names that I know are available.
--
Cannot change nedit menubar font
Here is the bug entry for nedit:
http://sourceforge.net/tracker/index.php?func=detail&aid=1553446&group_id=11005&atid=111005
I'm guessing there's some sort of problem with lesstif not picking up
system settings correctly. Instead of getting the font that all GTK and
Qt apps are using, I get some
Public bug reported:
Binary package hint: konqueror
I'm using the latest up to date Dapper.
If I open a PDF from a web page in Konqueror, it has two Tools menus,
one of which is empty.
** Affects: kdebase (Ubuntu)
Importance: Untriaged
Status: Unconfirmed
--
Displaying a PDF, Ko
Here, try this page:
http://wiki.duskglow.com/tiki-index.php?page=OGP%20Artwork
Click on the "OGA Logo" link.
--
Displaying a PDF, Konqueror has two "Tools" menus, one empty
https://launchpad.net/bugs/59231
--
kubuntu-bugs mailing list
kubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
Public bug reported:
I'm not sure if you can assign a bug to two packages, but this is a bug
in both X11 and Konqueror.
Try this URL:
http://rock.mididb.com/beachboys/
Usually, on the right, there's this ad that flashes really annoyingly
and makes X11 and Konqueror eat lots of CPU.
When I mini
Public bug reported:
Binary package hint: kde
Start Konqueror
Select "Network Folders"
Select "Add a Network Folder"
Add a remote samba share
Try to remove the network folder you cannot.
I've looked at all sorts of configuration stuff and googled for answers
to no avail. It appears that Kon
Public bug reported:
Binary package hint: gtkwave
I've been using gtkwave for a long time. I just switched it Kubuntu,
and I want to continue using it, but the one available from ubuntu seems
to be broken. I have a perfectly valid wave dump file, but I can't get
gtkwave to show me any signals,
I should apologize for the errant bug submission. It turns out that I
was simply unaware of how to add signals. However
Older versions of gtkwave had a nice "add signals" button on the tool
bar. When trying to figure out how to use this version, I had seen the
"search" options, but I didn't
Public bug reported:
Binary package hint: konqueror
>From the Konqueror Location>Print... dialog, I can figure out how to
print the whole document or a subset of pages, but I can't figure out
how to print only a selection I've made on the page. Does that feature
not exist? If it does, I can't f
Public bug reported:
I have a Samsung ML-2152W, and I'm using the pxlmono driver. There is
no driver setting for duplexing (which, per se, is also bad), and in
addition, the printer's console setting for duplex is being overridden
(the button on the printer says "duplex", but everything prints si
Public bug reported:
Binary package hint: konqueror
Go to www.myuhc.com and click on "Find Physician or Facility".
Javascript produces an error, claiming that my browser (Konqueror) is
not W3C compliant. KDE developers like to hype their W3C compliance, so
they may want to look into this.
** Af
Public bug reported:
Binary package hint: adept
When I tell Adept to install flashplugin-nonfree, it _appears_ to hang.
I first thought it was a network problem until I clicked "show details".
Then I saw that what had happened is that the installer assumed that it
had a terminal and was waiting o
Public bug reported:
When I install flashplugin-nonfree (see bug #61932), I get (from the
error messages that appear when you "show details") the following error
message (the messages are actually copied from manually using apt-get,
because adept does not let me copy from its "terminal").
# sudo
My bug (61932) was marked a duplicate of this one. Does that mean it's
confirmed?
Anyhow, it sounds to me like the REAL bug in YOUR case is that it's even
bothering to ask if you want to overwrite the config file. Shouldn't
the pre/post-install script automatically merge your old config changes
Public bug reported:
Binary package hint: samba
Occasionally, I'll have a samba mount mysteriously die on me. That is,
the Windows machine is fine, and I can smb mount the share on another
Linux box, but the mount point on the Dapper machine has for some reason
gone stale.
Anyhow, the problem i
Public bug reported:
Binary package hint: nedit
I can have an number of nedit windows open on local files. If just one
window is open on a file that is on a samba mount, and that mount point
hangs up, ALL nedit windows freeze. And nedit never recovers. There
doesn't seem to be any sort of time
Public bug reported:
I have added a second printer to my network and used the "System
Settings" program in KDE to add it. Now, every application in the
system can see this new printer and print to it successfully.
Except OpenOffice.
Closing all OOo windows and reopening doesn't help either. An
Here's another one:
https://launchpad.net/distros/ubuntu/+bug/70085
--
Meta-bug: Ubuntu needs major software RAID overhaul
https://launchpad.net/bugs/68308
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
See this web page for a howto on RAID.
http://www.linuxsa.org.au/mailing-list/2003-07/1270.html
I'm using RAID1, and I'd like to boot from the secondary disk if the
first one is dead. To do that, you need to add another entry to the
list for the kernel that replaces (hd0,0
Public bug reported:
I've written a program that reads from /dev/dsp at its default rate of
8KHz and 8 bits per sample. I'm using kernel "2.6.15-27-386 #1
PREEMPT".
Here's a snippet of code from my program:
main()
{
int in;
int i;
int n, status, blocksize, divisor=16;
unsigned c
I was not suggesting that manual config changes be prevented. I was
suggesting that they be generally discouraged. For the desktop users,
there is a graphical (or even possibly curses-driven) configuration tool
that should be preferred (indeed, it should be made so user-friendly
that no one quest
I have encountered a probably related problem. I have a Samsung ML-
2152W (and my driver is postscript).
On the printer's panel, I have duplex off. From "System Settings"
application (from the main KDE menu), I selected my printer and disabled
duplexing.
Yet, any postscript document I printed c
I am experiencing similar problems with KDE's control panel versus other
KDE apps. If I set duplexing in the control panel, it affects nothing.
If I set duplexing when printing from Konqueror, it affects EVERYTHING.
This is true whether I'm printing from an app that's aware of duplexing
or just lp
Public bug reported:
Binary package hint: kde
Regarding: Kmenu > System Settings > Printers > Properties > Driver
If I use this to configure driver settings for duplexing, it has no
affect one way or the other. The settings here are completely ignored.
If I go to print from Konqueror, and I c
Public bug reported:
Binary package hint: konqueror
I'm using Dapper with the latest updates.
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
And search for the paragraph that starts with, "Although Shva Na is not
transcribed, an exception is made."
There are two places
Public bug reported:
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
Search for the line that says, "The Hebrew letter Chadi (צ׳) is spelled
with the English letter combination, ch (as in "chips")."
Notice how there's a box to the left of the tsadi (chadi) letter, rather
Public bug reported:
Binary package hint: kde
Whenever I try to print a text file, it puts the text outside of the
printable margins.
1) There needs to be an option to set this somewhere. I haven't been
able to find it. If it's there, it's well-hidden.
2) There should be reasonable default ma
I would like to verify that I observe this bug too. It's like
copy/paste functionality comes and goes. Sometimes, I can click away
from a document then refocus the window, and copy/paste will work again.
Sometimes, it works in some nedit windows and not others at the same
time. Once the problem
Public bug reported:
Have a look at this page:
http://en.wikipedia.org/wiki/Wikipedia:Hebrew
Search for the line that says, "The Hebrew letter Chadi (צ׳) is spelled
with the English letter combination, ch (as in "chips")."
Notice how there's a box to the left of the tsadi (chadi) letter, rather
Actually, I manually reconfigured it by changing the PCI bus ID in the
xorg.conf file. I never tried running dpkg-reconfigure. (I'm just
lucky that I have a bit of inside knowledge about how to configure
X.org.)
I content that the typical desktop user will not know anything about
dpkg-reconfigur
Any specific reason why it's been rejected?
--
Feature request: Please add reiser4 support, if possible
https://launchpad.net/bugs/31849
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I'm afraid that I haven't used KDE in quite a while. This bug was one
of the contributing reasons. However, since I haven't heard anything
from the Lesstif bug report I submitted, it would be safe to assume that
nothing's been done to fix it.
--
KDE clipboard (klipper) incompatible with lesstif
The important aspect of my original report was that not only did it grab
100% CPU, but it appears that the plugin grabbed all keyboard/mouse
input. In other cases where something eats 100% CPU, the OS scheduler
allows other processes to work anyhow, so if I click on some other app's
windows, that
You have been subscribed to a public bug:
Binary package hint: kde
Whenever I try to print a text file, it puts the text outside of the
printable margins.
1) There needs to be an option to set this somewhere. I haven't been
able to find it. If it's there, it's well-hidden.
2) There should be
The fact that the tsadi appears would suggest to me that the package was
probably installed. Wouldn't it be very strange to have only SOME of
the Hebrew letters installed? In any case, like I said, Firefox renders
the chupchik correctly, so it's probably a KHTML/Konqueror bug.
But let's say, for
Since then, I have generally avoided using nedit over NFS or other
network-mounted file system. However, I know of no development in nedit
that would have affected this. People are still endlessly debating the
clipboard problems. If I were you, I would assume that this is still a
problem. It's
I've been in contact with someone at macfixit.com about this. They
track MacOS bugs. They did some experiments and couldn't reproduce the
problem. Could someone else try to see if, for instance, the original
permissions of the files being burned are consistent with what's on the
disk and that th
Note that I've submitted a complementary bug report to Apple. Don't
count on them fixing it, though -- you know how it is with the
proprietary vendors. So Ubuntu should take the high ground on this one.
--
Insert CD -- mounts with all file permissions -rwx--
https://bugs.launchpad.net/bugs/
I really don't have time to draft a spec on this. But just because I
don't have time for this doesn't mean that it isn't a "bug" in the sense
that this causes people a lot of trouble. This is an issue that should
remain open until there's a general solution to it. That is to say, the
fact that I
Sweet. Since I'm the beggar and not the one actually doing the spec, I
humbly make some suggestions.
One is a stop-gap measure to deal with config files as they currently
are. What you need for a merge are three files: (1) the old config
file, unmodified, (2) the old config file, modified, and
You might want to reconsider. I think it's important to put usability
as a higher priority than avoiding awkward programming. Not putting
usability first is one of the things that keeps Linux off of more
desktops.
--
Please move machine name selection to earlier or later in the install process
I would love to take your suggestion, but unfortunately, I'm just too
busy. With a day job, my own startup (Traversal Technology), a research
assistantship, other responsibilities regarding my Ph.D., and my own
open source project (Open Graphics), I just have too many things on my
plate. I chose
This one:
http://www.newegg.com/Product/Product.aspx?Item=N82E16827151133R
--
Burning CD/DVD, starvation, doesn't use burn-proof
https://bugs.launchpad.net/bugs/72886
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
I haven not noticed any problems like this recently.
--
Adept freezes solid during upgrade of "libpq4" package.
https://bugs.launchpad.net/bugs/68678
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for adept in ubuntu.
--
kubuntu-bugs mailing
In any case, adept processes shouldn't be left lying around so that
users have to manually kill them.
--
[Dapper] Adept won't start -- many defunct adept processes
https://bugs.launchpad.net/bugs/63036
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug co
It has happened a number of times since I reported the bug.
Unfortunately, it's always after using the browser with other flash
things for some time before it hangs up.
I'm using a Radeon 9250 with the open source drivers.
--
nspluginviewer hangs up whole X server
https://bugs.launchpad.net/bugs
BTW, I haven't upgraded yet to Edgy or Feisty. It'll be a while before
I'll be prepared to do that.
--
nspluginviewer hangs up whole X server
https://bugs.launchpad.net/bugs/66573
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for kdebase in u
Public bug reported:
A few references to start off with:
http://www.ubuntuforums.org/showthread.php?t=283881
https://launchpad.net/distros/ubuntu/+source/partman-md/+bug/22301
https://launchpad.net/distros/ubuntu/+bug/58892
https://launchpad.net/distros/ubuntu/+bug/58893
https://launchpad.net/dis
Public bug reported:
Binary package hint: adept
I started Adept, Fetched updates, asked for a Full Upgrade, and then
told it to apply changes. The Preview says it's going to upgrade a
single package, libpq4. Adept reports that it's "Done", but it's frozen
solid. After killing the adept process
Public bug reported:
Binary package hint: adept
I'm using Dapper, fully updated.
(1) Start Adept and click on "Fetch Updates"
Note that when it's done, I get back to the screen where you can search
for packages. However, although nothing is typed into the search line,
it shows no packages.
(2
Public bug reported:
At the Ohio LinuxFest in 2005, I spoke at length with one of the Ubuntu
developers who convinced me to convert to Ubuntu. Apparently, he
convinced me under false pretences.
See, I had been using Gentoo, and one of the most nightmarish things
about it was the breakages that r
Public bug reported:
After a great deal of trial and error, I have figured out that if
Parallels has a VM size greater than 596 megs, the installer hangs up
(at 91%, observed already by a number of other people on other real
hardware), and also, after installing under a smaller VM, the system
won'
It's hard to say. You can boot the live CD with 600M, but the installer
freezes. If you get past the install, then boot freezes. When the
installer has frozen, however, the rest of the system is okay. Only the
installer is locked up.
--
Feisty won't boot under Parallels if VM has more than 59
I'm booting whatever the distro defaults to. Note that this same
problem happens with the most recent releases of Dapper and Edgy. Same
exact behavior.
--
Feisty won't boot under Parallels if VM has more than 596 megs
https://launchpad.net/bugs/88563
--
ubuntu-bugs mailing list
ubuntu-bugs@li
Sorry for the delay. I thought the install had gotten farther before.
I'd tried installing Dapper, Edgy, and Feisty, and each one had some
sort of install problem. Feisty's install (this time, at least) hangs
up while showing this message:
Loading module 'aec62xx' for 'IDE chipset support'...
I
I don't recall having seen this problem in the recent past.
--
Adept hangs after "Fetch Updates"
https://bugs.launchpad.net/bugs/68713
You received this bug notification because you are a member of Kubuntu
Team, which is a bug contact for adept in ubuntu.
--
kubuntu-bugs mailing list
kubuntu-bu
It doesn't boot far enough for me to get a dmesg. Are you saying you
want to see the dmesg from the point when the install locks up?
--
Feisty won't boot under Parallels if VM has more than 596 megs
https://launchpad.net/bugs/88563
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https
There are many who are stuck on Dapper, because we CANNOT upgrade. Much
horror results when we try. It would be most agreeable if these fixed
could be backported to Dapper as well.
--
Adept has trouble handling interactive installation scripts
https://launchpad.net/bugs/39756
--
kubuntu-bugs
I'm afraid I can't try Feisty for my main desktop. I'm running software
RAID, which is known to get broken during upgrades (on top of all of the
other horrors that happen in Dapper -> Edgy upgrades).
I did try installing Feisty under Parallels, but the installer always
locks up, so I had to use C
Note that this may be a false alarm.
It appears that the quake installer script is looking for a program
called "print" to use in place of "echo". The one installed on my
system, however, has something to do with email and is therefore the
wrong "print".
--
Can't run some bourne shell scripts
h
With all due respect, I think it's inappropriate to reject this bug. I
think you didn't understand the bug I was reporting. If mdadm is
installed by default, then it wasn't automatically configured properly.
It reported nothing to me, so either the installation didn't set it up
right, or it's bro
Part of a message from the NEdit list:
>>We are aware of various clipboard locking problems with some versions of
Lesstif and OpenMotif, but to the best of our knowledge, the problems
are in (some versions of) those libraries. An often common factor is
that KDE's clipboard manager (Klipper) is mon
Part of an email from NEdit list:
>>We are aware of various clipboard locking problems with some versions of
Lesstif and OpenMotif, but to the best of our knowledge, the problems
are in (some versions of) those libraries. An often common factor is
that KDE's clipboard manager (Klipper) is monopoli
1 - 100 of 172 matches
Mail list logo
