I'm also running into this bug, in Intrepid on a Dell 1420. If I switch
to alsa sound, I can get capture to work, but at uselessly low levels.
lspci | grep Audio:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
Capture was working fine in Hardy.
--
Re
Why not just drop vinagre ? It's broken since the beginning, never
worked properly. It's presence in the stable releases (and in the LTS
too !) is not justified.
--
vinagre fails to connect
https://bugs.launchpad.net/bugs/206227
You received this bug notification because you are a member of Ubunt
I encounter the same situation.
The scenario :
Use "connect to server" to connect to a windows share, enter user & password;
Use the icon created on the desktop to browse the newly connected share. I get
"Unable to mount location , failed to mount windows share".
HOWEVER, and here comes the intere
I downloaded the nightly code from
http://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/ and wanted
to compile, but I still failed. Can anybody help me?
Before I compiled, my laptop had not any sound, but volumn keys and
command alsamixer looked good.
Following is what I had done:
1, ren
According the guide
http://ubuntuforums.org/showthread.php?t=726055&page=2&highlight=thinkpad+x300,
now my Thinkpad x300 have sound!
--
Thinkpad X300 produces no sound
https://bugs.launchpad.net/bugs/200693
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
I'm having the same issue. The fan either runs all the time or turns off and
on rapidly. Driver version 177 (from the restricted drivers configuration
tool), and here is output from lshw:
*-display
description: VGA compatible controller
product: GeForc
I am having the same problem: my touchpad worked fine in Hardy, but
*mostly* doesn't work in Intrepid. If I repeatedly try to scroll (move
up and down at the right side of my touchpad) I can get it to scroll a
little bit. This makes me think that vertical scrolling is on, but the
tolerances are n
es, so play with the values. It doesn't matter if your left and top edges
are too low, but you don't want your right and bottom too high or else it wont
work.
You can also use synclient -l to get your current edge positions, if
you'd like to start there instead.
About t
I'm not sure where to attribute this. It depends on where the change in
edge calculation is taking place. I don't think that a fresh install
would have helped, especially if this is the same problem that James is
having (if so, edges are calculated when X comes up?).
James: I'd be interested to
s the
current position that the touchpad is reading (if I read the man page
right), so it makes sense that its different. I could just be mis-
interpreting what you pasted---did you capture specific finger positions
before and after suspend? Thanks,
-blue
--
Upgrade to Intrepid removes Syna
No worries. What's interesting is that they're the same, and that my
settings (from a Dell Insprion 1420) were the same--at least I'm pretty
sure they were! I'm not at all sure why it works after suspend for you,
does setting these values specifically in xorg.conf fix the problem for
you? But, i
I nominated this bug for Intrepid. I'm not sure what exactly that
means, but I think it essentially means that someone has to look at it
and determine if it is a priority to fix it before the 30th. Hopefully
that's what that means. I don't like the idea of breaking scrolling in
a release; that w
The bug title is improper, as the problem does not happen only with
"security=share".
Someone should change that.
--
SMB error: Unable to mount location when server configured with security=share
https://bugs.launchpad.net/bugs/209520
You received this bug notification because you are a member o
Public bug reported:
Binary package hint: arno-iptables-firewall
failed to install
ProblemType: Package
Architecture: i386
DistroRelease: Ubuntu 9.04
ErrorMessage: subprocess post-installation script returned error exit status 2
Package: arno-iptables-firewall 1.8.8.o-3
PackageArchitecture: all
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/28899579/Dependencies.txt
** Attachment added: "DpkgTerminalLog.gz"
http://launchpadlibrarian.net/28899580/DpkgTerminalLog.gz
--
package arno-iptables-firewall 1.8.8.o-3 failed to install/upgrade: subprocess
post-insta
i got this problem too.
Jul 31 00:00:14 nb-riccardo dbus-daemon: Rejected send message, 1 matched
rules; type="method_call", sender=":1.38" (uid=1000 pid=4111
comm="/usr/lib/indicator-applet/indicator-applet --oaf-a")
interface="org.freedesktop.DBus.Properties" member="Get" error name="(unset)"
i got this problem too on ubuntu 9.04
Jul 25 14:14:37 nb-riccardo pulseaudio[3434]: module-x11-xsmp.c: X11 session
manager not running.
Jul 25 14:14:37 nb-riccardo pulseaudio[3434]: module.c: Failed to load module
"module-x11-xsmp" (argument: ""): initialization failed.
Jul 31 00:58:11 nb-ricc
Public bug reported:
Binary package hint: nautilus
When using very small fonts, Nautilus shows bad sized/aligned textboxes when
creating an object or renaming an object.
Font is Arial , size 8
Screenshot follows;
** Affects: nautilus (Ubuntu)
Importance: Untriaged
Status: Unconf
--
When using very small fonts, Nautilus shows bad sized textboxes
https://launchpad.net/bugs/55154
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Sorry :) It's 2.14.3-0ubuntu from dapper.
--
When using very small fonts, Nautilus shows bad sized textboxes
https://launchpad.net/bugs/55154
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: totem-xine
1. Distro Ubuntu Dapper 6.06
(totem-xine 1.4.3-0ubuntu1)
Steps :
- edit ~/.gnome2/totem_config
- set subtitles.separate.src_encoding:iso-8859-2
- Play a movie with this encoding in the subtitles.
- Totem crashes.
Interesting is the fact that se
It seems to crash with any subtitle. I was a little busy lately, but I'll try
to make some time and produce a backtrace.
Thank you,
--
totem crashes with iso-8859-2 subtitles
https://launchpad.net/bugs/55227
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/ma
Let's first see if there is something identical between our setups :
- How did you get your dapper ? Is it a fresh install ? Or an upgrade.
- What kind of hardware are you running ? Is it a laptop ? What are the
hardware details ?
--
Random connection drops from the xserver
https://launchpad.net
The problem also exists in the recently released win32 evolution build
(2.6.2)
--
Erroneous display of "From" field
https://launchpad.net/bugs/49444
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I am using a Dell Latitude D505, i810 driver. The system was previously
breezy and this problems were not happening. The problem appeared after
upgrading from breezy to dapper.
--
Random connection drops from the xserver
https://launchpad.net/bugs/44983
--
ubuntu-bugs mailing list
ubuntu-bugs@li
** Attachment added: "The bug seems to have old roots"
http://librarian.launchpad.net/3101760/EvoBugDebian.png
--
Erroneous display of "From" field
https://launchpad.net/bugs/49444
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The biggest problem of all is that it is very hard to pinpoint the
problem, as it seems that the xserver itself does not produce any error
at all when dropping the connection. Such an error could help identify
the circumstances when such a connection drop occcurs, but yet again
there is no error on
Public bug reported:
Binary package hint: kernel-image-2.6-686
After launching wpa_suplicant the following error appears in the logs :
[17180011.404000] Badness in vsnprintf at lib/vsprintf.c:279
[17180011.404000] [] vsnprintf+0x630/0x640
[17180011.404000] [] snprintf+0x2b/0x30
[17180011.4040
I just noticed that in a hurry I picked a wrong package in the chooser (kernel
2.6.7 instead of 2.6.15).
I kindly ask an administrator to move this bug to the appropriate package or
close this bug and I will file it again under the correct package & version.
Thank you in advance.
--
Badness
Distro is Ububtu Dapper
$ uname -a
Linux 2.6.15-25-686 #1 SMP PREEMPT Wed Jun 14 11:34:19 UTC 2006 i686
GNU/Linux
wpasupplicant 0.4.8-3ubuntu1.1
wireless driver : ipw2200
Machine : Laptop, Dell Latitude D505
--
Badness after wpa_supplicant is launched
https://launchpad.net/bugs/50812
I could add the following :
- nm-applet knows about WPA protected wireless networks, but the gnome tool
does NOT.
- gnome tool does know about profiles (which is good) but network manager does
not.
The big problem here is that for mobile users there is no easy way to switch
between various ki
Not side effect yet. But even more weird is the fact that some times the
error does NOT appear. That is sometimes it appears immediately after
launching wpa_suplicant sometimes it does not. I'll try to see if this
is somehow related to the access point the wpa_suplicant is trying to
connect to.
--
... it should support both static addresses AND network profiles for mobile
users.
Further, there should be only one way to set up network interfaces
:network-admin or network manager.
As I posted on another bug report, network admin can do some things but
miserably fails at others and vicevers
I can confirm this bug. It happens with totem AND mplayer, but it's a
xorg bug. This stupid bug keeps reappearing in al xorgs, while I never
had this with xfree. The problem is that xorg is not smart enough to
allocate memory required for xv framebuffers.
--
Totem receives BadAlloc when playing v
I can confirm this bug. It happens with totem AND mplayer, but it's a
xorg bug. This stupid bug keeps reappearing in al xorgs, while I never
had this with xfree. The problem is that xorg is not smart enough to
allocate memory required for xv framebuffers.
BTW : one of agp's design goals was to all
Public bug reported:
Binary package hint: xorg
When playing high resolution video files both totem and mplayer crash with a
BadAlloc X11 error because xorg is not able to handle large buffers required
for xv.
I could mention the following :
- one of agp's design goals was to allow the graphic
This is not only an openbsd & breezy issue only.
That is :
openbsd 3.9 + ubuntu DAPPER hangs in the same way.
Even some linux distributions behave exactly the same : they hang as soon as
the emulated hard disk was detected.
For example, the latest tinysofa "Ceara" iso hangs at hard disk detection
..and a new screenshot. One is with a hdd image, the other without hdd
image (cdrom emulation only). They both hang at the same point.
** Attachment added: "qemu hangs"
http://librarian.launchpad.net/4299242/ss2.png
--
qemu won't boot OpenBSD 3.8
https://launchpad.net/bugs/33951
--
ubuntu-b
I confirm this and more : same behaviour on a _desktop_ computer. This because
on that desktop on_ac_power returns nonzero and the system thinks it's running
on batteries.
The actual hdparm setting is here :
/etc/apm/event.d/20hdparm
This creates TWO new bugs :
1. first one is that this script ru
I think this deserves a greater importance than "wishlist".
A value of 18 for hdparm -S translates to 90 seconds, and this is insane,
because even let to idle the system will try write to the disks every 2..4
minutes.
That means that the disk idles for 90 seconds and spins down and after another
Please note that that editing hdparm.conf alone does NOT solve the
problem, see comment 58 for details.
--
default value in power.sh potentially kills laptop disks
https://bugs.launchpad.net/bugs/59695
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug co
OOps :) This one :
https://bugs.launchpad.net/ubuntu/+source/acpi-support/+bug/59695/comments/28
--
default value in power.sh potentially kills laptop disks
https://bugs.launchpad.net/bugs/59695
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact f
I would rather suggest to modify /etc/apm/event.d/20hdparm and at line 32
instead of
APMD_SPINDOWN=18
put
APMD_SPINDOWN=180 # 15 minutes instead of 90 seconds.
You can also set /etc/hdparm.conf, but as long as the apmd service is activated
the setting in /etc/hdparm.conf will be useless, so
Can someone else with this problem post the result from the following :
First,as root:
on_ac_power ; echo $?
Second :
ps axu |grep apm
--
default value in power.sh potentially kills laptop disks
https://bugs.launchpad.net/bugs/59695
You received this bug notification because you are a member of
I intend to investigate later who is calling hdparm to set hard disc power
management parameters. I intend to do this by replacing the hdparm binary with
a dummy script that
will log it's execution date, parameters and a pstree. I hope by this to find
out who and when calls hdparm.
If it is a bi
As I promised, here are the results of the test. I replaced hdparm with a
script and logged what happened.
So, here we have the proof that actually the scripts ARE altering the default
settings.
<>
Fri Oct 26 01:28:00 EEST 2007 hdparm invoked with parameters -S 4 /dev/sda
...[pstree]
|-apmd
There is (almost) no firmware and/or bios issue here. It's the OS's scripts
that set insane defaults.
As about aggressive power management settings - let's not forget that a hard
drive is a delicate mechanical piece of equipment that spins at 5400 or 7200
rotations per minute.
It is not suppos
I have _very_ big doubts that any hard disk (even a laptop one) is supposed to
spin down after only 20..30 seconds of idle time. If you can sustain this "it's
supposed to be that way" with an official manufacturer specification or
statement I would greatly apreciate it.
As far as I know, repea
Kamil Páral : You are right that laptop disks are much more suitable for
increased spin up/down cycles (with about 600k supported by seagate drives) .
However, keep in mind that due to another bug added to this one, even desktop
computers with desktop drives can end with this kind of settings,
Pedro : just parking the heads and not spinning down the platter is not
usually a problem. This is usually a good thing and helps minimize
damage on the magnetic surface on shocks and vibrations to whick laptop
computers are usually exposed to.
--
default value in power.sh potentially kills lapto
@Gilles Schintgen
It's actually about spin down.
I already proved (
https://bugs.launchpad.net/ubuntu/+source/acpi-support/+bug/59695/comments/78 )
that hdparm is invoked with -S 4 which translates (see hdparm manpage) in "Set
the *spindown* timeout for the drive to 20 seconds".
This is the
Gilles,
I think the root of the both evils is common :)
On a desktop computer, spinning down and then spinning up the hard disk
produced the same annoying "clank". If I had a newer and quieter hard drive on
that machine
I could have missed this problem ... (or at least realize it only later by
Parking is not bad and should not have side effects.
On a new system ( just a few days old) running another OS Load_Cycle_Count is
3317.
This parking means just moving the heads away, it does not stress the disk in
any way .
The spindown/spinup however, does (and does not help save energy if i
I didn't find any execution of hdparm in the start-up scripts,
How did you search ? Because in my case there are a FEW executions.
--
default value in power.sh potentially kills laptop disks
https://bugs.launchpad.net/bugs/59695
You received this bug notification because you are a member of Ubun
I already did that and I found that hdparm is executed a lot of times
just during one boot process :
https://bugs.launchpad.net/ubuntu/+source/acpi-
support/+bug/59695/comments/78
--
default value in power.sh potentially kills laptop disks
https://bugs.launchpad.net/bugs/59695
You received this
On Sun, 2007-10-28 at 13:26 +, Bart Samwel wrote:
> @Blue:
>
> Regarding this: "Even more, on the same manufacturer's site I found a
> document where they say that respinning up a harddisk takes a lot of
> power (the current peaks at about 1A) which means that
The backport package should be just a temp workaround. I expect the problem to
be solved in the default kernel. As someone said before :
"Compiling and fiddling with the settings is nice and all, but a desktop
distribution without a sound out-of-box (for quite big set of a hardware) is a
silly
Agree, somehow the default install should work out of the box by fixing
the default kernel or by adding the backported modules in the default
installuntil the default kernel is finally fixed and the backported
modules will not be needed any more.
--
[gutsy] no sound on Dell Latitude D630/D83
But is it a "restricted" module ?! If it's not, why mix it with the
restricted stuff ?
--
[gutsy] no sound on Dell Latitude D630/D830/Inspiron 1300/Precision
M4300/Vostro 1500/1700/Apple Aluminium iMac/Acer TM6292 pci id 8086:284b
https://bugs.launchpad.net/bugs/131133
You received this bug not
*** This bug is a duplicate of bug 61381 ***
https://bugs.launchpad.net/bugs/61381
I confirm the problem reported. Happens with gutsy beta installed in a
vmware virtual machine, default install.
--
gnome-settings-daemon won't start, crashes
https://bugs.launchpad.net/bugs/70046
You received
I can confirm this.
Passing "acpi=off" at boot solves the problem, however this makes the cpu run
with only one core.
--
ksoftirqd/0 always using about 30% cpu time
https://bugs.launchpad.net/bugs/153195
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
If a definitive fix will not make it to hardy, then at least vinagre should be
demoted from the default vnc client position. I want to remind everybody that
this release is LTS and it would be very lame to ship something that is
installed by default and by default it does not work.
Thank you.
But why does it work right after connecting with vncviewer ?
Connecting to a host with xtightvncviewer (which always works) triggers vinagre
to also work for that target.
--
vinagre fails to connect
https://bugs.launchpad.net/bugs/206227
You received this bug notification because you are a membe
I also suffer this problem now. because of this I cannot use skype to
talk with my friend.
--
Thinkpad X300 produces no sound
https://bugs.launchpad.net/bugs/200693
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
I experience the same behavior when using vinagre "against" two different
linux host, both running ubuntu gutsy.
It is also important to note that given a significant number of retries the
connection will eventually succeed.
Using
ii vinagre0.5.0-1VNC client for the GNOME Deskt
This problem still exists in evolution 2.22.0-0ubuntu from hardy
...
--
Erroneous display of "From" field
https://bugs.launchpad.net/bugs/49444
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bu
I am curious if this is going to be fixed for hardy release. Otherwise
it would be quite ridiculous to have a default vnc client that is not
even able to connect to the previous version of ubuntu...
--
vinagre fails to connect
https://bugs.launchpad.net/bugs/206227
You received this bug notificat
Accroding to http://www.thinkwiki.org/wiki/Category_talk:X300, this bug will
not be solved until kernel 2.6.26 is released.
But when kernel 2.6.26 will be released?
[QUATE]
Things that don't work:
* Audio:
* Latest ALSA release shows Master and PCM only in the mixer and produces no
audio
I don't want to compile. Is there any other way to solve this problem?
--
Thinkpad X300 produces no sound
https://bugs.launchpad.net/bugs/200693
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lis
I have just found a very weird thing :
1. Try to connect using vinagre a few times. I get "the connection was closed"
every time.
2. I try to connect using vncviewer (from xtightvncviewer ) and this works fine.
3. I close vncviewer and get back to vinagre and try to connect again using
vinagre.
It's not usually a videoram detection issue . The only parameter that
usually seems to solve the problem (at least on the machines I tested
on) is CacheLines.
Please check this thread too - I'm sorry I forgot to put the comment
here, too :
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/5249
It does set some parameters. It does not matter if it does this during
the boot process itself or as a part of another independent subsystem.
--
Hard drive spindown should be configurable
https://bugs.launchpad.net/bugs/17216
You received this bug notification because you are a member of Ubuntu
A default gutsy install has :
ENABLE_LAPTOP_MODE_ON_BATTERY=1
So, when on battery those settings are applied.
Unfortunately, even wh
You should rather try this not after reboot but immediately after power-on, so
that no setting put by the previous instance of the operating system is
inherited.
(Some BIOS-es do not hard-reset the hard drive during the warm reboot process).
--
Hard drive spindown should be configurable
https:
I can confirm it on dapper.
It happens on a Cirrus Logic CS 4614/22/24/30 sound card when playing a dvd
with vlc.
--
VLC 5.1 Stuttering
https://bugs.launchpad.net/bugs/188588
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
Well,we are a few years later and the same problem persists. You can now
configure the network manually and set a static ip for wireless - but
the setting it's not applied; Also network profiles still suck (as in
they do not work at all at remembering combinations of wired/wireless
settgins correct
I used a dapper install with this problem until yesterday. Except the error per
se, it did not create problems and it worked as expected.
It could be worth investigating from a security point of view but not from the
functional point of view.
--
Badness after wpa_supplicant is launched
https://
*** This bug is a duplicate of bug 49360 ***
https://bugs.launchpad.net/bugs/49360
First I must say that I'm quite dissapointed that this bug is still in
"Unconfirmed" status as it is really easy to reproduce it with a large
resolution video (and i810).
However, I have finally found where t
I do not think there will ever be a way to include in the distribution
any possible mimetype. In these condition, there must be a way for the
enduser to control how his files are opened based for example only on
the extension (or anything that works for any generic file).
At this moment, it is imp
I don't know if it is a coincidence, but it seems to be something related to
displaying the
https://launchpad.net/bugs/49444
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Christoffer, could you make the test that Daniel proposed ? (The
previous post). After I encountered the problem I switched to imap and
it would be quite hard for me to switch back to pop3 and reproduce the
problem with CAMEL_DEBUG=all.
--
Evolution looses some mails on the way from the inbox to
If there is confidential data in the log file, try to find&replace the sensible
strings (emails,servers... ) with something else.
Obviously there is no easy way to tell what could be relevant and what not in
the context of this bug. Maybe a developer can help here.
--
Evolution looses some mail
I suppose the bug is still there. Meanwhile I switched to IMAP to
overcome evo's problem by keeping all messages on the mail server.
--
Evolution looses some mails on the way from the inbox to the screen
https://launchpad.net/bugs/44828
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
h
Probabbly it's an obscure bug , hard to encounter. However, please tell
me what else could I send to you so that you can confirm the problem
yourself.
Thank you,
--
Evolution looses some mails on the way from the inbox to the screen
https://launchpad.net/bugs/44828
--
ubuntu-bugs mailing list
The problem still exists and I did not test in Edgy.
However, maybe the following factors are of relevance :
I use a high resolution (1400x1050); The dpi is custom set to 96 dpi (this is
not the default).
Maybe you can test this on similar conditions (high res, modified dpi , very
small font - m
I confirm this bug.
Because of it for example xmail does not install (the postinst scripts need to
echo -e user pass >ctrlaccounts.tab )
Why is dash included as /bin/sh, anyway ?! It seems a lot of people out there
have compatibility problems with this cr*p.
BTW, this is not so much a dash issu
I don't have a large video right now, but I'll check it as soon as
possible. If this really solves the problem, you are right, the option
should be set by default.
--
Xorg can't handle large XV buffers (badalloc)
https://launchpad.net/bugs/52490
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ub
Well... it does NOT solve the problem. Maybe this option works on some
drivers only :
(WW) I810(0): Option "LinearAlloc" is not used
Of course, video players still crash on large videos.
--
Xorg can't handle large XV buffers (badalloc)
https://launchpad.net/bugs/52490
--
ubuntu-bugs mailing
This issue still exist in Ubuntu Lucid.
Any idea when the fix will be available in updates ?
--
firefox,3.5/3.6 startup-notification bug
https://bugs.launchpad.net/bugs/469752
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
Vinagre had a "remote closed connection" bug back on Hardy Heron (LTS release)
and today in Lucid (the next LTS release) I still find the same issue.
You guys are hilarious, and this cr*p of an application, "vinagre" even more
so. I'm sorry to say that, but it's just sad that after so many years
This is not quite fixed, yet.
I encounter the following issues :
* the startup scripts do not always succed in correctly unlocking the keyslot.
Looks like sometimes the keyboard
input does not get to the password reader but to something else.
* And if you can switch to console 8 unfortunately o
Just reproduced this on a fresh install in a VM:
- made a clean install;
- cryptsetup luksFormat /dev/somepartition
- added esomepartition /dev/somepartition none luks
in /etc/crypttab
-added /dev/mapper/esomepartition in /etc/fstab
rebooted.
After reboot, the startup scripts get to the point wher
PS :
As gdm overtook the keyboard and screen, it seems that the init scripts somehow
hang, and other things like for example the tty's do not start at all. You'll
have to get back to tty1 and send a few enters to unhang the sequence.
--
cryptsetup devices not mounted on boot
https://bugs.laun
How could be the bug invalid if du's reporting is always ok ?
It can however be reproduced on the local filesystem. I am able to reproduce
locally in many cases using the following scenario :
1). Go to a populated and loaded directory. For example a quite heavily used
user home.
2). Enter one sub
Let me reissue :
we have the following structure :
A
|-- B
| |-- X
| |-- Y
| |-- Z
| |-- file1
| |-- file2
| `-- file3
|-- C
| |-- file1
| |-- file2
| `-- file3
|-- D
|-- E
`-- F
We enter directory B and request directory sizes. mc will count everything that
resides in director
Please see the attached screen cast.
See how I descend in my home, in .gimp-2.4 and in .gimp-2.4 i run directory
count.
Then, i go back to the parent directory (which is my home directory ) and run
directory count there, too.
Instead of counting that directory, mc limits itself to displaying ON
...another recording of the same issue, this time on a nfs mounted
directory. It is clearly visible how mc itself forgets the correct size
from one interrogation to another.
** Attachment added: "screencast-mc-dircount2.ogv"
http://launchpadlibrarian.net/48680411/screencast-mc-dircount2.ogv
-
Well, EVEN SO it fails, because it sometimes calculates (as previously
expected) the sizes for all the content in the current directory and in other
cases it does compute any sizes AT ALL or just limits itself to count only ONE
directory from all the (sub)directories in the current directory.
In
I understand what you say. Unfortunately the new behaviour is not intuitive at
all IMHO.
Select ".." to count the CURRENT directory ?
Hope a smarter way is found.
I will also try to recheck the network fs mc vs du issue if i will be able to
reproduce it.
--
mc directory sizes not reliable
http
I agree, the default behaviour should be user configurable.
And is there alt least a way to exit presentation mode after such a file was
opened ?
Pressing escape closes the application
--
MS Office .pps files should open in presentation mode as with MS PowerPoint
https://bugs.launchpad.net/b
1 - 100 of 368 matches
Mail list logo
