For those of you who are struggling with this I can confirm that the winfast
DTV1000T remote (serial no Y0400052) can be made to work reliably with gutsy
(7.10). The two issues that need to be tackled are
1- Fix the cx88 module by Updating to the latest V4L driver
2 - recompile kernel with timer
With the fix release in Ubuntu (according to this bug report), it should
be resolved here too
** Changed in: mythbuntu/8.04
Status: New => Fix Released
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because you are a me
I made the source changes described above and then replaced the cx88*
modules on the Mythbuntu 7.10 system (not the system where I built the
modules). Do I also need to change the kernel timer frequency to 1000Hz
and replace all kernel modules on the Mythbuntu system?
How about configuring the re
Hi Ben,
Thanks for testing and the update. I'm glad to hear things are working
with the newer Hardy release. Unfortunately, I don't believe the
patches will be backported to Gutsy as it does not qualify as a stable
release update candidate.
** Changed in: linux (Ubuntu)
Status: Incomplet
I bought a Leadtek Winfast DTV1000T card in Australia just before
Christmas. The remote control included in the box is marked LEADTEK
WinFast Y04G0033, apparently yet another model of remote control. The
same marking was on the remote control that came with a LEADTEK WinFast
DTV2000H that I bought
I've tried this with the Hardy Heron Alpha2 LiveCD and the remote
control is detected (a message is shown in dmesg) and the number keys
work.
I also did a 'cat /dev/input/event6' (the input that was listed in dmesg
for the remote) and this produced output when keys on the remote were
pressed.
I h
Thanks for the specific reference Ben. I've examined the current Hardy
Heron kernel and it appears that this patch has been included. Care to
test the new kernel with the Hardy Heron Alpha2 LiveCD and verify your
remote will now work? You can download and try the Hardy Heron Alpha2
release from
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing l
The following patch was accepted by V4L and was my original suggestion
as a fix. Is this what you are looking for Leann?
http://linuxtv.org/hg/v4l-dvb/rev/f4d6a832acf3
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because yo
Against linux-source-2.6.20 this bug does not meet the criteria for a
stable release update and is being marked as Won't Fix. You can learn
more about the stable release update process at
https://wiki.ubuntu.com/StableReleaseUpdates . Thanks!
** Changed in: linux-source-2.6.20 (Ubuntu)
St
Do you know if there have been any efforts to get this submitted and
accepted into the mainline kernel? It is a lot of extra work for the
Ubuntu kernel team to maintain out of tree patches. As such they require
evidence of upstream submission before considering to maintain community
patches locally
Here is the second lircd.conf file.
** Attachment added: "The second lircd.conf file I tried."
http://launchpadlibrarian.net/10965333/lircd.conf_Y04G0004
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because you are a memb
I have a Leadtek Winfast DTV1000T Remote control no. Y0400052. I have
downloaded the lircd.conf file for this remote from:-
http://lirc.sourceforge.net/remotes/leadtek/Y0400052
Although this has the right serial number the top of the file says that
it was bundled with WinFast 2000 in Austrailia
** Changed in: linux-source-2.6.22 (Baltix)
Sourcepackagename: linux-source-2.6.20 => linux-source-2.6.22
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubun
** Description changed:
Remote control doesn't work for Leadtek Winfast DTV1000
Running Ubuntu Feisty/Gutsy with all current patches.
+
This has been tested in Fiesty and Gutsy
The following files need to be edited as follows...
/drivers/media/video/cx88/cx88-cards.c
Find
** Description changed:
Remote control doesn't work for Leadtek Winfast DTV1000
Running Ubuntu Feisty/Gutsy with all current patches.
- The following patch is claimed to fix it (haven't tested this):
+ This has been tested in Fiesty and Gutsy
- http://linuxtv.org/hg/v4l-dvb/rev/f4d6a8
** Description changed:
Remote control doesn't work for Leadtek Winfast DTV1000
- Running Ubuntu Feisty with all current patches.
+ Running Ubuntu Feisty/Gutsy with all current patches.
The following patch is claimed to fix it (haven't tested this):
http://linuxtv.org/hg/v4l-dvb/rev
Sorry the second link in that post was supposed to be:
http://daniel.saunders.googlepages.com/howto.html#WinFastDTV1000RemoteControlWithMythTV
--
Leadtek Winfast DTV1000T Remote Control
https://bugs.launchpad.net/bugs/151561
You received this bug notification because you are a member of Ubuntu
Bu
This is Still a problem in Gutsy 7.10
However I found this could be by
Recompiling my kernel with a Timer frequency of 1000 as described here
http://forums.whirlpool.net.au/forum-replies.cfm?t=566843&p=3
Downloading the latest V4l and applying the Apatches described here
lists.zerezo.com/vide
19 matches
Mail list logo
