The autofirma package can be downloaded from:
https://firmaelectronica.gob.es/Home/Descargas.html
You click in "Autofirma para Linux" and download a zip file that
contains the deb package and some documentation in Spanish (if you think
there might be something useful in the documentation or in th
I think I have found the culprit. It is a package called "autofirma",
distributed by the Spanish Administration to perform digital signatures with
the official certificates provided by the government.
Apparently, there is some kind of incompatibility between the files generated
by this package a
No success in my case (difference with Maurice report). Tried again today to
upgrade (via dpkg -i) to 20180409 and got an error message saying that
post-installation script produces an output status of "1" (this means error
when executing the postinst script, doesn't it?). Package left unconfigu
The bug appeared while upgrading from Ubuntu 16 to Ubuntu 18. It is a very
serious bug, since many other packages depend on ca-certificates and were left
unconfigured. Lots of error messages in the screen.
When the upgrade finished, the system was left in a very bad situation with so
many non-co
I also tried to install version 20180409 after Ubuntu 18 was already
working and the error is still there. It is not a problem of the upgrade
procedure but a problem of the package itself.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
Hello again. I think I have found a better workaround. First install the
package dconf-editor if not already installed. Then open a terminal and type
dconf-editor.
Navigate to apps -> indicator-session and check the box
"supress-logout-restart-shutdown".
Close dconf-editor and since then, I have
Just for information of anyone landing here, I indicate the results of
my tests, I have tested the procedure with glxgears and the game
Minecraft, both reporting similar results.
If I remove all custom xorg configuration, just leaving defaults Ubuntu
settings, the DRI_PRIME procedure appears to wo
Hello. I have experienced this bug after updating from Ubuntu 14 to Ubuntu 16
(it did not exist in Ubuntu 14).
Following what it is said in this thread, I have created an script in $HOME/bin
with the contents:
gnome-session-quit --logout --no-prompt
To logout, I open a terminal and execute this
Thanks a lot for your reply. Now I have to find out what "render offload
target" means. I have tried "DRI_PRIME=1 glxgears" which I think is a good test
for card performance and it reports 1700 FPS instead of the 60 FPS reported
without the DRI_PRIME=1 so I assume that the dedicated card is inde
Public bug reported:
Hello.
I have a laptop with two graphic cards, one integrated and one dedicated. The
relevant lines in lspci are:
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated
Graphics (rev 09)
09:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI]
Hello.
I have bumped into this bug too. In the middle of a session (I do not remember
doing anything special in that session, either installing new software or
changing system settings or anything of that kind), the keyboard switched from
Spanish to English and stayed like that even after reboot
Addition to my previous post. There is another file in the home directory,
namely ~/.cache/update-manager-core/meta-release-lts that suffered the same
problem that the file in /var/lib mentioned in my previous post.
It was neccesary to delete also this file so that the update is offered not
only
I experienced the same problem and, in my case, it seemed to be provoked by a
bogus /var/lib/update-manager/meta-release-lts file. It contained what seemed
to me an error report page generated by a server (the file looked like a html
file with something like "page not available, contact the webm
Yes, it works for me in Lucid. At least at 200 dpi.
--
HP ScanJet 5300C doesn't work
https://bugs.launchpad.net/bugs/83587
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://
The variable appears in fact defined in /etc/profile but the value is
"MToolkit" instead of "MToolKit"
So the workaround is to edit /etc/profile and, in the line:
export AWT_TOOLKIT="MToolkit"
MToolkit should be changed to MToolKit (change lowercase "k" to
uppercase "K").
After this, java plugi
Searching the web, I think I have found a workaround. If firefox is
started from the console as:
AWT_TOOLKIT="MToolKit" firefox
looks like java aplets do work.
I have no idea of what is "MToolKit" or "XToolkit" but the environment
variable seems to instruct java to use "MToolKit" instead of "XTo
Public bug reported:
Binary package hint: firefox-3.0
This bug appears as a branch of bug 600158, where I was told to separate
Flash and Java issues. This new bug is related to Java plugin. After
upgrading firefox from 3.0.19 to 3.6.6, the java plugin does not work
any more. The simlinks in /etc/
In my case, java-6 plugin does show in the plugin list, so it is not a problem
of symlinks or such so.
When trying to open a page with a java applet, it does not work and the java
panel shows errors like this:
java.lang.ClassCastException: sun.awt.motif.MToolkit cannot be cast to
sun.awt.X11.XT
I have reupgraded firefox 3.6 and changed the dom.ipc.plugins.timeoutSecs
variable to 1000. This does not solve the problem. The crash banner still
appears. As told before, the crash appear well before the previous 45 seconds
deadline.
It seems that I have to downgrade back.
--
After upgrading
Thanks for the reply. The plugin packages I am using are:
adobe-flashplugin 10.1.53.64-1
sun-java6-plugin 6.20dlj-0ubuntu1.8.04
I assume that if I set dom.ipc.plugins.timeoutSecs to a very large number (say
1000), I am virtually deactivating this feature (when I find time for it, I
will re-upgrad
Public bug reported:
Binary package hint: firefox
Today a bunch of updates arrived and were installed through update-manager.
Among these, firefox was upgraded from 3.0.19 to 3.6.6. After this upgrade, any
page using flash is not loaded, a banner with "flash plugin crashed" appearing
instead.
Also hit by this bug with kernel 2.6.28-15, booting fine with old 2.6.24-24
(have not tried with intermediate versions). If the initrd is not used, the
kernel boots fine as indicated in previous posts. At first sight, there is no
problem in using the system after booting without the initrd (how
I think I've been hited by this bug, too. Firestarter do not start
automatically on startup the system, supposedly it should starts when eth0 is
brought up. Also when I try
- sudo ifup eth0
or
- sudo ifdown eth0
I can see the "return code 2" message and firestarter does not start.
On the other h
Exactly the same thing happening to me also in an Acer Aspire One after
upgrading the kernel to 2.6.24-23.48. Fortunately an older kernel was
left so I can boot and work. From the last comments, I understand that
2.6.24-23.49 in the repository does not solve the problem and we have to
wait for 2.6.
I am dissappointed that this bug has been marked as "low importance" and
"won't fix". The problem still exists and it's quite serious, even if it
seems to affect only to a limited number of people. Setting
cpufreq_ac_policy to conservative in gnome-power-manager does not
completely solve the proble
Polo:
For me, the following command:
sudo echo -e "libsane hold" | dpkg --set-selections
has succeeded in putting the libsane package in "hold" status, so
update-notifier does not bother me any more asking me to upgrade it.
I just have to be careful when I update other packages via update-manager
Hello. I am glad that you get the scanner to work. Regarding resolution, I use
200 dpi in a standard basis and switch to 300 when I want better resolution. I
am not sure if I have ever tried 150, perhaps not.
Greetings,
Miguel
--
HP ScanJet 5300C doesn't work
https://bugs.launchpad.net/bugs/835
Patricio:
The scanimage reply shows that the device is detected and its permissions are
properly set. From here, I do not know what the problem might be. For me, xsane
worked fine when reaching this point.
Perpahs you may try scanning something from the console with
scanimage -v whatever.png
And
bhmb:
It seems that you have not the package sane-utils installed. Please go to
synaptic and install this package before using the commands sane-find-scanner
and scanimage.
--
HP ScanJet 5300C doesn't work
https://bugs.launchpad.net/bugs/83587
You received this bug notification because you are
The scanimage -L command works as root but not as normal user. Assuming that
the normal user does belong to the scanner group (it may be checked by: cat
/etc/group | grep scanner), it seems that the device node has not been created
belonging to the "scanner" group.
In one case, I have found that
Hello. Perhaps the scanner is recognised but the permissions for
accessing it are wrongly set (because of mixing packages of different
Ubuntu versions). Install the package sane-utils (if not already
installed) and try the following commands (with the scanner connected of
course) in a terminal and
This seems a duplicate of bug 220697. Reading the reports in that bug,
it seems there that the bug appears when a password is set for root,
which is my case.
--
users-admin does not save changes
https://bugs.launchpad.net/bugs/212317
You received this bug notification because you are a member of
Confirmed for me in ubuntu hardy heron. I have to create new user with
the console utility adduser.
--
users-admin does not save changes
https://bugs.launchpad.net/bugs/212317
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
Sorry, in previous post I have said "bug 352218" where I should have
said "item discussed in forum thread 355218".
--
braid and other screensavers lock up system when compiz activated [-intel,
-nvidia]
https://bugs.launchpad.net/bugs/101943
You received this bug notification because you are a me
spiro2903: I think you have been hitted by bug 352218 (marked at duplicate of
95569) due to a problem in frequency scaling reported and confirmed long time
ago but still unsolved. A workaround is to set the frequency governor in the
"conservative" state. This may slow your computer a bit but it
The procedure to downgrade libsane is indicated in a post of mine at bug
83587.
--
[hardy-release] HP 5300C/5370C doesn't work
https://bugs.launchpad.net/bugs/221750
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Just confirm that I've been hited by this bug, "nvidia" driver and it does not
happen if visual effects are not enabled. I have tested all the screensavers
(from a terminal, just keying /usr/lib/xscreensavers/whatever) and the
following ones display the bug:
xrayswarm
interaggregate
braid
whirlw
--
[hardy-release] HP 5300C/5370C doesn't work
https://bugs.launchpad.net/bugs/221750
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
5300C used to work perfectly in Gutsy. It does not work in Heron. When
connecting the scanner the usb devices are created but not assigned to the
"scanner" group. If I manually change the group to "scanner", device is
detected when starting xsane as normal user but the program segfaults or hangs
Compiled custom 2.6.25 kernel and F-spot now starts correctly. It seems
that the applications cited here need something only present in 2.6.24
or higher.
--
Can't start any mono-based app: Segmentation fault
https://bugs.launchpad.net/bugs/203451
You received this bug notification because you ar
Yes. I have reinstalled language-pack-es-base and firefox appears again in
Spanish. What could be the problem? Packages updates in the wrong order?
Thanks for your help.
--
Firefox 3 and xulrunner 1.9 needs translations
https://bugs.launchpad.net/bugs/195013
You received this bug notification b
Yes. I have reinstalled language-pack-es-base and firefox appears again in
Spanish. What could be the problem? Packages updates in the wrong order?
Thanks for your help.
--
Firefox 3 and xulrunner 1.9 needs translations
https://bugs.launchpad.net/bugs/195013
You received this bug notification b
I do not know if it is the same issue discussed here. I used to have
Firefox3beta running correctly in Spanish. After an update via update-
manager, firefox has been updated to 3.0~rc1+nobinonly-0ubuntu0.8.04.1
and language-pack-es-base to 1:8.04+20080527.1. After that, firefox does
not longer appe
Sorry. I think that my problem is not the same as yours. I have never
seen the "drc" error. Perhaps you have some sort of wrong
configuration file somewhere. If you may delete any configuration file
in your home directory related with xsane ... (but I do not where such
configuration files might
To downgrade, first you need to download the deb file, in this case from:
http://archive.ubuntu.com/ubuntu/pool/main/s/sane-backends/
Download at any directory the file libsane_1.0.18-3ubuntu1_i386.deb
Then, in a terminal, move to the directory where the file has been downloaded
and execute:
sudo
My scanner HP 5300C worked perfectly until I upgraded to Ubuntu 8.04 TLS. After
upgrading, when connecting the scanner, the /dev/bus/usb device is created but
is not longer assigned to the group "scanner" but to the group "root", so if I
start xsane (as normal user) the device is not detected. I
I have observed this too. F-spot segfaults on start when running with
custom 2.6.23 kernel and it works properly when using the official
2.6.24 kernel.
--
Can't start any mono-based app: Segmentation fault
https://bugs.launchpad.net/bugs/203451
You received this bug notification because you are
*** This bug is a duplicate of bug 153924 ***
https://bugs.launchpad.net/bugs/153924
** This bug has been marked a duplicate of bug 153924
Sticky notes, not minimizing
--
"Sticky Notes" V2.20.0 no longer hide notes when clicking desktop background
since upgrading Ubuntu 7.04 to 7.10
http
I think this is the same issue discused in bug 153924 .
--
"Sticky Notes" V2.20.0 no longer hide notes when clicking desktop background
since upgrading Ubuntu 7.04 to 7.10
https://bugs.launchpad.net/bugs/155439
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I have found the same problem.
If I enable compiz, the notes dissappear left-clicking in the desktop but if I
disable compiz again, the bad behaviour returns. Cannot have correct perfomance
if compiz is disabled (this is different from what was told above).
The problem has appeared when uprading
I do not know if it is exactly the same problem as yours. If I start up the
computer with the printer off, apparently cups automatically flags the printer
as not enabled. Even if I turn the printer on afterwards, the printer still
appears in the computer as stopped and any job sent keeps sleepin
Hello. Thread 352218 in the forums is clearly also related to frequency
changes but I am not sure if it is exactly the same bug described here.
In any case, if you think there is any additional information to what it
is told in the forum that may help to solve the issue please ask.
--
CPU frequen
52 matches
Mail list logo
