Footnote 2: Scrap last comment re. 'bonus' - that only works if it is
the first document opened... But at least if fits the pattern.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/739184
Title:
[Libr
A footnote to my comment #36 above:
Just installed LO4.0.1 from http://www.libreoffice.org/download as
before, and can report that the icons which appear in the Unity launcher
and the Application Switcher are much improved. Not perfect, though -
successive programs of whatever filetype are marked
For those who need menemonics (alt+...) but are not fussed about the
HUD, this might be an acceptable workaround (on Quantal, certainly;
might well work on Precise and Raring). It's the best solution I have
found.
Removed/purged LibreOffice, and then installed LibreOffice4 from
http://www.libreoff
Just confirming this affect me as well on 12.10, 64 bit.
Removing libreoffice-gtk leaves such an unappealing environment to work
in I choose to remove all global menus (sudo apt-get remove indicator-
appmenu).
I use menemonics in all applications - especially in LibreOffice. THe
HUD is a nice ide
@Damian
I presume you used Andrea's ppa. She sent me a .deb which I installed
instead of the libsane-hpaio in the Quantal hplip package. It worked for
me and Piedro and I've had no further problems. I'll try to attach it to
this comment. Hope it works!
** Attachment added: "libsane-hpaio_3.12.6-3
Sorry to report that this bug is not fixed in Quantal.
With Global Menus, the visibility of the Left Hand pane of the dock
arrangment needs to be much wider than necessary (about a third of the
window width) to avoid losing its LH side. This seems to be the opposite
of what is required - the RH si
I have added Luc's ppa as in #99 above and can confirm that menus can
now be accessed in pre-existing documents opened from Nautilus, Dash
etc. However, comment #103 goes too far in saying 'libreOffice Global
Menu now works perfectly':
The menu can be accessed *only* by using the pointing device o
@Piedro
You're quite right. I had forgotten that Andrea had sent me the file as an
attachment to a private email, and it is not the same (name or filesize). I
suppose that she is happy to share it further, so if you send me an email, I'll
forward it.
@hotzeplotz
Is it OK for me to send Piedro t
Sorry to hear that. I've looked in Synaptic and it shows the installed
version as '3.12.6-3ubuntu4', so the system has installed the @hotzeplot
file 'believing' it to be a reinstallation of the repo's one.
I see that yours reports it as coming from a ppa (3.12.6-3ubuntu4ppa1) -
does that mean you
@Piedro
Hi. I'm fairly sure I uninstalled ALL versions of hplip, then installed
only the version in the repos - not the website version.
I used gdebi (if you've not got it, get it from the repos - it is a far
quicker way of installing .debs) to install Andrea's .deb. It pointed
out that I was RE-
@Francisco:
Exactly! How much revenue has Canonical lost through driving away users over
the past year or more? How much would it have cost them to pay a programmer for
a few days work to fix this?
@Marcos:
BTW, Quantal works reliably with LO - *as long as you disable global menus for
all appli
@Sarbeswar
Please see my comments #9 and #33. This is not, repeat *not* fixed in
the version of hplip on the HP website!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1069898
Title:
regression: can
I'm on Quantal, amd64 and it fixed it for me. Unless it was the cause of
the mother of all storms in the Atlantic, I can report no ill effects.
Big thanks to Andrea.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpa
This comes too late for me - I upgraded to Quantal recently, mostly in
the hope of this bug being fixed. To my immense relief, it was, but in
Quantal there is another extremely critical bug combined with other
serious problems. (Fortunately, however, in Quantal there is a
workaround: disable global
@Antonio:
I'm quite happy for the moment :) I wish I had the skill to help fix
these things, but I'm just nowhere near that level. Looking forward to
it all working (until the next release?... :P)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
@ Antonio
Many thanks for the clarification. It'll be great when that is fixed as
well, but for now I'll just do without 'indicator-appmenu'. I'm quite
happy to lose a thin slice of my screen space (not even that, in
Firefox) for the sake of speed and flow...
Oddly, this (ALT not bringing up LO
Pressing ALT does not show menu items:
When this new version builds successfully, will it also fix the non-
appearance of menu items when ALT is pressed? I raised this in #52, but
I could not tell if the reference to another bug in #53 was in answer to
my question.
Until it is, I'll opt to ditch
@Alain: Very handy - thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1064962
Title:
Global menubar items do not work when opening a document directly from
nautilus with no LibreOffice instan
Thanks - I get it now.
Other commands correct? Please let me know if not.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1064962
Title:
Global menubar items do not work when opening a document direc
I'd like to test this (and benefit from it, if it works), but am not
sure how to proceed. I've added the ppa, "ppa:bjoern-michaelsen
/libreoffice-quantaltest-20120601" to my system and have run 'sudo apt-
get update' and 'sudo apt-get upgrade'. No updated packages were
installed and nothing seems
@Andrea: Thanks for looking at it. However, I'm not at all sure what I
should do now. I did eventually manage to compile something once
(gtkpod, broken on Precise), but it took a lot of figuring out for
someone not used to it. Is there a patched version I can run, or even a
.deb?
--
You received
Is there any progress on the non-appearance of menu items when Alt is
pressed, or is that a different bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1064962
Title:
Global menubar items do not wo
This is NOT fixed in hplip-3.12.10a.
I have run it a number of times, manually and automatically. Printing
seems OK, but attempting to scan still gives the 'end of file' error.
Or am I missing something?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is sub
Update to 'Solution' above:
This does not fix it after all. Instead it updates libsane-hpaio to the
later version, whereupon scanning is again impossible. But adopting the
earlier package is a temporary workaround until a fix appears.
--
You received this bug notification because you are a membe
@Antonio
Thanks for the feedback - and for the hard work. I really am grateful
and everything - I just want to be able to say with confidence "Linux is
simply better, and it's free" as I used to! Looking forward to the fix
:)
--
You received this bug notification because you are a member of Ubun
Solution found to Q1 above:
Run:
sudo apt-get install -f
Chose to keep existing (i.e. not update to 'correct' version) version of
lbsane-hpaio and Synaptic was happy.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launc
Having done the above, I am faced with complaints from Synaptic and Apt
that hplip has unmet dependencies (it is considered a broken package),
and I cannot continue to add software. 2 questions:
1) Is there a way around this?
2) when will there be a fix for hplip?
Help much appreciated.
--
You
Apologies - I think my remarks about the visibility of the menus hold
true, but I am experiencing cases where a previously existing document
(opened as the FIRST document from within the LO 'White Window' ),
displays menus which although VISIBLE, do not FUNCTION... The workaround
MAY be to open a b
I finally got it working, although apt complains. Andrea Rota does in
fact give the solution above, though I missed it as well:
"if i downgrade this single package to libsane-
hpaio_3.12.2-1ubuntu3.1_amd64 from Precise i can scan ok"
I found a copy of that file (here: http://packages.ubuntu.com/p
To help those needing to have a reliable workaround, it is this:
If NO Libreoffice documents are currently open, ensure that you open an
EXISTING file from the general LibreOffice 'White Window'. Then the
menus should be displayed.
This works for me, whereas minimising restoring etc. produce no b
@MC Return:
Very many thanks for that. I had just gone about it the laborious way,
installing wmctrl and copying a script I came across* to be run from a keyboard
shortcut, but this is definitely easier. I was congratulating myself that 'my'
way did not need the key combination to be hit twice,
12.10 64 bit:
I confirm the need to select 'Show Desktop' twice in order for it to
function. In Quantal it's even worse, since Ctrl+Alt+D does not work any
more, so you have to use the App-Switcher (twice!) just to get to the
dektop.
Anyone know of a command to show the desktop, which could be as
Installed again using 'sh hplip-3.12.10a.run'
Reported errors:
error: ubuntu-12.10 version is not supported, so all dependencies may not be
installed. However trying to install using ubuntu-12.04 version packages.
warning: An error occurred running 'sudo apt-get update'
and finally:
/usr/lib/py
Correction:
I now see that deleting the printer and reinstalling using hp-setup caused the
version of hplip in the Quantal repo to be used, which explains the last post.
I had assumed it would have been updated. Shall try again from the downloaded
verson of HPLIP.
--
You received this bug noti
Update:
Deleted printer and fax from 'Printers'
Reinstalled from terminal using hp-setup -g
hp-check now reports that a scanner is installed:
"device `hpaio:/net/Photosmart_C309a_series?zc=HPD6238E' is a Hewlett-Packard
Photosmart_C309a_series all-in-one"
--
You received this bug notification b
Update (cont.)
... but running xsane now gives the "Failed to open device 'hpaio ... ... end
of file reached' error message.
Which is what I had using the version of HPLIP in the Quantal repos.
Any ideas?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
Running hp-check (with ot without --fix)
- reports "No scanner found"
- give the warning "Printer is not HPLIP installed. Printers must use the hp:
or hpfax: CUPS backend for HP-Devices."
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
PS: The printer incorrectly reports that the printer 'has no ink left'.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1069898
Title:
regression: cannot open network scanner with error "unable to rea
@ Sanjay:
Hello Sanjay. I really appreciate your help, and have done what you
suggested. However, although the printer works (I've not tested the
fax), xsane and simple scanner report 'no devices available' and 'no
scanner detected' respectively. The HP-C309a is installed on (wired
into) a network
Do we know when the fixed version is likely to reach the repos?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1069898
Title:
regression: cannot open network scanner with error "unable to read
devi
Just confirming that I am affected by this bug as well.
HP309a, Quantal, 64bit, HPLIP from repos: printing OK, scanning fails as
other have described. I worked through hp-check --fix (with sudo, which
seemed to help get past certain errors), but despite all dependencies
being met, and all the nece
Is there any good reason why the Precise package cannot be brought up to
date?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/946799
Title:
gtkpod crashes, reports missing schema
To manage notificat
To confirm, the version at
http://sourceforge.net/projects/gtkpod/files/gtkpod/gtkpod-2.1.2/gtkpod-2.1.2.tar.gz/download
seems to work well once compiled.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/
To be honest, I didn't check for the 'schema' complaints when I re-
checked 2.1.1, but the instant crashing when adding folders or selecting
preferences was still very much the case.
I would recommend trying to compile the source code, which is to be
found at: http://sourceforge.net/projects/gtkpo
@dusoft:
Glad it works for you, but I just checked version in repos and it still crashes
on my system (Precise, 64bit) as before. However, gtkpod-2.1.2~f6a1f02 compiled
on my machine works pretty well. I don't know what changes would be responsible
for the improved functionality, but someone out
@High Tech:
I'm happy to post anything useful, but am not sure precisely what you need. I
have been compiling the program in /usr/local/src/gtkpod-2.1.2versionxxx
(running the commands (all sudo): ./configure, then make, then make install).
Compressing the directory gives a tarball of around 15M
Update (on Ubuntu 12.04, 64 bit, for use with iPod Classic 120GB): Some
video now working.
Have compiled 2.1.2 unstable, and though it crashes occasionally (when
adding an unsuitable filetype, for example), mp4 videos can be added
successfully - generally. In preferences, plugins supporting mp4 an
UPDATE:
Following success compiling version 2.1.1, I have now compiled 2.1.2
(stable), and am pleased to report that in this version you CAN now
successfully edit 'preferences' and also 'add folders' of music.
However, I cannot successfuly add any video files; opening the 'MP4 File
Type Plugin gi
I successfully compiled gtkpod from source
(http://sourceforge.net/projects/gtkpod/files/, stable version 2.1.1) on
Ubuntu 12.04 64bit yesterday. However, it behaves exactly as the Ubuntu
package - starts fine, but crashes as soon as 'preferences' is selected,
or one attempts to 'add folder'.
--
Same here: 120GB iPod Classic crashes when opening preferences or trying
to import a folder. File import seems to work (but not confirmed yet).
It used to work, then video import failed, now nearly everything
fails... Most frustrating! I hope some kind expert has the necessary
skill to get things w
Same behaviour here. Specifically:
12.04 LTS 64-bit
When I start Chromium, the icon appears in the launcher, but with no 'flag'
(notch thing) to show it is running and it does not appear in the application
switcher using Alt+Tab.
Incidentally, I have the same experience with Sunbird when a laun
Success at last :). I installed all three debs and now the bamfdaemon
runs.
The problem before was that after killing the daemon, the (first)
replacement version of bamfdaemon had been quite simply failing to
start, so it's not suprising that no window management was functioning.
I note that when
I don't think I have any unusual localisations, but this is much wider
problem: it's not just in LO that window titles are missing when using
the updated bamfdaemon- it's in ALL applications (along with app-
switcher not working and window buttons missing), and the system is made
absolutely unusabl
Thanks for that. In that case your daemon seems not to be running for me
(see output from previous post).
Ideas? Actually, it's not a problem for me right now, but it is
concerning if your fix is not going to work on all systems, that is a
problem, I would have thought.
--
You received this bug
I've now had a chance to check the situation and the results are below.
Unless I'm missing something, the new version of bamfdaemon is not
working for me. I'm not sure how to start and stop a daemon, so I have
been logging out and back in (but do note the exception where the
working version was act
Sorry, but this most definitely does not work on my system (11.10,
Unity3D, 64bit). With the bamfdaemon replaced with the one supplied by
Paolo Stivanin, or freshly compiled by me according to the recipe, the
result is that not only does the app switcher fail completely, but no
(global-)menu items
Disappointed footnote to my post above:
CORRECTION!
Despite that all being the case earlier this morning, ALL LO documents (MS or
OpenDoc.) now fail to appear in the App Switcher and the Unity Launcher. Sorry
about that. All very frustrating...
--
You received this bug notification because you
MS v. OpenDocument filetypes (with workaround):
I find that behaviour is different for .ods and .xls / .xlt files
I can confirm Xavier Guillot's experience (post 1). Here are some
detailed observations of my own - all involving LO 3.4.3, CALC, on
Oneiric 64bit, Unity 3D. These relate to applicati
Same experience here.
The other 3 options seem to work as expected.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/874458
Title:
Unity launcher set to 'Dodge Windows' in Oneiric stays hidden when
u
My 2 pennyworth:
Wishing to extend the time syndaemon disables the touchpad, I configured a
'startup application' consisting of "syndaemon -i 2 -d -K -t ". The option to
'disable the mouse when typing' (in the mouse settings) was still checked, and
as soon as I started typing, the cursor froze.
Same problem here, running Natty, Unity, Firefox4
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771425
Title:
home page not loading. instead it tries http://25129603/
--
ubuntu-bugs mailing list
Sorry, no news of any kind from me - I have decided to stick with 8.10
for the life of this laptop and to remember to check that any future
machines I buy do not have ATI graphics.
--
resume (after suspend) broken on ASUS W3V - Jaunty
https://bugs.launchpad.net/bugs/367822
You received this bug n
That is interesting, and will no doubt be useful to the people who might
be able to provide a solution to this. It would seem that either we
have different problems, or, IF we have the same problem, it is not
directly caused by the new ATI graphics driver. (Incidentally, I am not
certain that susp
** Description changed:
ASUS W3V laptop - suspend/resume regression
Resuming from suspend results in completely blank screen, keyboard
useless. Have to shutdown using power button. Happens every time.
Hibernate/resume works reliably.
Have been using Ubuntu since 7.04, and suspe
Public bug reported:
ASUS W3V laptop - suspend/resume regression
Resuming from suspend results in completely blank screen, keyboard
useless. Have to shutdown using power button. Happens every time.
Hibernate/resume works reliably.
Have been using Ubuntu since 7.04, and suspend/resume has worke
65 matches
Mail list logo
