Until this is resolved try working around it by replacing PulseAudio
with pipewire. Works well with my Bose 700 headset.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1871794
Title:
[Bluetooth] No
lt;>0 │
│ < Master >Headphon Headphon Speaker Speaker Speaker PCM Mic │
└
I am hoping there is going to an easy Fix
There are many others with Alienware Rigs waiting for Linux to be compatible
Cheers
Gaz
--
You re
*** This bug is a duplicate of bug 1332900 ***
https://bugs.launchpad.net/bugs/1332900
Hi All was this problem solved or Not
I also have Alienware 18
I have tried to configure it as above
Same deal I think the sound is only coming out from the Sub
I have spent a week trying to sort it and
Same problem in Ubuntu 13.10, blueman 1.23 when connecting to a GPS
sharing app on my phone over rfcomm. If the connection is lost at some
point then I have to restart bluetoothd before I can connect again. I've
tried using `rfcomm release rfcomm0` which deletes the serial device in
/dev/ but the b
Public bug reported:
/dev/dsp is no longer with us, but recite can't even write to a file
without it.
$ recite input output
recite: could not open "/dev/dsp": No such file or directory
** Affects: recite (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notifica
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1033247
Title:
package openarena-081-textures (not installed) failed to
install/upgrade: short read on buffer copy for backend dpkg-deb during
`./usr
Public bug reported:
tried to install open arena, the internet cable was knocked out durint
installation, the computer failed to repair it, now i cant remove the
failed installation.
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: openarena-081-textures (not installed)
ProcVersionSignat
Same issue on Dell XPS L501X with "SynPS/2 Synaptics TouchPad", except I
don't get any 4-finger gestures (my touchpad may not support that?)
Could this have something to do with the problem?:
$ sudo mtview /dev/input/event8
error: could not grab the device
--
You received this bug notification
Public bug reported:
After the upgrade, this dir is empty when it should be a symlink to
java-6-openjdk-amd64. This causes jvisualvm to fail to start as it can't
find a jdkhome.
The problem can be fixed by removing the directory:
sudo rm -R /usr/lib/jvm/java-6-openjdk
Then reinstalling the offe
The workaround in #2 causes failures in plugins later on.
I'm unable to install the Android SDK unless I do it as root, then when
I run again as my normal user the plugins are in an errored state
because one of them has a dependency on com.ibm.icu (Plug-in
"com.ibm.icu" version "4.4.2.v20110208" r
Just removed rhythmbox, removed dobey's ppa and installed rhythmbox from
standard 12.04 repositories. Confirmed this is fixed as of today's
updates.
I guess I don't have access to mark this as resolved though. Can someone
do that?
--
You received this bug notification because you are a member of
I just did an apt-get update; apt-get upgrade and I can no longer
reproduce the problem either.
Looking good!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/967924
Title:
rhythmbox DAAP plugin cause
** Attachment added: "Contains an example XHTML file and a test script"
https://bugs.launchpad.net/bugs/940749/+attachment/2781056/+files/ElementTidy%20crash.zip
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpa
Public bug reported:
Some files cause elementtidy so crash the Python interpreter. This has
been tested on 2 different 64-bit machines running Ubuntu 11.10 (mine
and the attached test was also run by dtmbmw325i in #ubuntu on
freenode).
I have attached a minimal example file and script which demon
Here's a screenshot I attached to the wrong bug:
https://bugs.launchpad.net/unity-2d/+bug/757652/+attachment/2090480/+files/Unity%203D%20-%203%20monitor%20setup%20with%20output%200%20as%20leftmost%20display.png
It's badly named, should say rightmost display. I worked around it by
switching my moni
This applies to Unity 3D on my triple head setup.
As you can see in the attached image, Catalyst Control Center shows that
the first output is the leftmost display and second is the rightmost.
** Attachment added: "3 monitors, panel and menu on rightmost monitor"
https://bugs.launchpad.net/ub
This also applies to vertical scrollbars when you have a panel on the
right hand side of the screen. Maybe a quick fix would be to temporarily
disable overlay-scrollbar when in gdm
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https:
Added patch
** Patch added: "_wajig.patch"
https://bugs.launchpad.net/ubuntu/+source/zsh/+bug/756997/+attachment/2013366/+files/_wajig.patch
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/756997
T
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/756997
Title:
wajig doesn't complete all sub-commands
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinf
Public bug reported:
Binary package hint: zsh
The completion function for wajig only completes the short list of
commands that are listed when you run "wajig commands". The problem is
that the completion function need to run "wajig -v commands" to get the
full list of sub-commands.
Instead of:
I recorded this video to see if anyone in #ubuntu+1 was having the same
problem with ATI on Ubuntu 11.04 Beta 1. It doesn't add much to the bug
report other than illustrating the black box thing that John, Tushar and
Guilluame describe above.
http://www.youtube.com/watch?v=rYz7k_CLksE
--
You rec
I have this in issue in Ubuntu 10.10, Compiz 0.8, Gnome 2.32.0. I am
using AMD's proprietary driver and have a 3 monitor desktop at
5760x1920. Resizing a GTK window larger than 3104 pixels wide causes my
session to crash and I'm returned to the login screen.
Chromium can be resized without problem
Disclaimer: I know nothing of GTK or Cairo.
First up, the source:
http://git.gnome.org/browse/gnome-system-monitor/tree/src/load-graph.cpp
This comment:
// FIXME:
// on configure, g->frames_per_unit =
g->draw_width/(LoadGraph::NUM_POINTS);
// knock FRAMES down to 5 unti
Also happens on 10.04 32-bit. Appears to be caused by the backlight
dimming on my laptop
** Attachment added: "Screenshot"
http://launchpadlibrarian.net/47981908/Screenshot-Balazar.png
--
Balazar crashes with Error: (GL_INVALID_OPERATION)
https://bugs.launchpad.net/bugs/572773
You received th
I can't see thumbnails for svgz files either. Not sure if this is a
regression or a different problem, because opening in EoG no longer
fixes the thumbs.
If I rename a svg file to svgz it does re-render the thumb, if I rename
a svgz file to svg then it doesn't re-render it. librsvg appears to be
b
Public bug reported:
Binary package hint: brasero
Brasero-common has no high contrast inverse icons. I've attached one for
the main icon.
** Affects: brasero (Ubuntu)
Importance: Undecided
Status: New
** Tags: icon icons
--
Brasero has no icon in High Contrast theme
https://bug
** Attachment added: "brasero.svg"
http://launchpadlibrarian.net/30044897/brasero.svg
--
Brasero has no icon in High Contrast theme
https://bugs.launchpad.net/bugs/410590
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
I see the same problem and confirm that the patch works.
** Changed in: zsh (Ubuntu)
Status: New => Confirmed
--
zsh completion broken for svn 1.5
https://bugs.launchpad.net/bugs/279545
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
I am taking a two pronged attack now, I have raised the lack of
'Smartdimmer' support for Geforce 8 series cards here:
http://sourceforge.net/forum/forum.php?thread_id=2070702&forum_id=67425
Be interesting to see which appears first, the bug fix, or the work
around fix :-)
--
unable to adjust s
Just to chime in with a bit more information and a reminder in case we
are losing focus, the original bug description concerned the NVidia
Geforce 8 series cards, I have a Vaio VGN-SZ71WN which has a 8400 GS
card on it, I tried the nvclock mentioned above (nvclock 8 b3) but it
tells me:
"Smartdimm
30 matches
Mail list logo
